Fracture behavior of short-fiber reinforced materials

1992 ◽  
Vol 7 (11) ◽  
pp. 3120-3131 ◽  
Author(s):  
Michael Murat ◽  
Micha Anholt ◽  
H. Daniel Wagner
Keyword(s):  
Fracture Process ◽  
Fracture Behavior ◽  
Volume Fraction ◽  
Fiber Composite ◽  
Finite Size ◽  
Critical Length ◽  
Short Fiber ◽  
Fiber Volume ◽  
Linear Elastic ◽  
Fiber Reinforced Materials

A discrete model of springs with bond-bending forces is proposed to simulate the fracture process in a composite of short stiff fibers in a softer matrix. Both components are assumed to be linear elastic up to failure. We find that the critical fiber length of a single fiber composite increases roughly linearly with the ratio of the fiber elastic modulus to matrix modulus. The finite size of the lattice in the direction perpendicular to the fiber orientation considerably alters the behavior of the critical length for large values of the modulus ratio. The simulations of the fracture process reveal different fracture behavior as a function of the fiber content and length. We calculate the Young's modulus, fracture stress, and the strain at maximum stress as a function of the fiber volume fraction and aspect ratio. The results are compared with the predictions of other theoretical studies and experiments.

Thermal Residual Stress in a Two-Dimensional In-Plane Misoriented Short Fiber Composite

1990 ◽  
Vol 43 (5S) ◽  
pp. S294-S303 ◽  
Author(s):  
M. Taya ◽  
M. Dunn ◽  
B. Derby ◽  
J. Walker
Keyword(s):  
Residual Stress ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Fiber Composite ◽  
Short Fiber ◽  
Two Dimensional ◽  
Fiber Distribution ◽  
Fiber Volume ◽  
Distribution Type ◽  
Short Fiber Composite

Residual stress induced in a misoriented short fiber composite due to thermal expansion mismatch between the matrix and fiber is investigated. The case of two-dimensional in-plane fiber misorientation is considered. The elastic model that is developed is based on Eshelby’s equivalent inclusion method and is unique in that it accounts for interactions among fibers at different orientations. A parametric study is performed to demonstrate the effects of fiber volume fraction, fiber aspect ratio, fiber distribution cut-off angle, and fiber distribution type on thermal residual stress. Fiber volume fraction and aspect ratio are shown to have more significant effects on the magnitude of the thermal residual stresses than the fiber distribution type and cut-off angle.

Effect of surface density and fiber length on the porosity and permeability of nonwoven flax reinforcement

2017 ◽  
Vol 88 (15) ◽  
pp. 1776-1787 ◽  
Author(s):  
Mohamed Habibi ◽  
Édu Ruiz ◽  
Gilbert Lebrun ◽  
Luc Laperrière
Keyword(s):  
Pore Size ◽  
Surface Density ◽  
Fiber Length ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Short Fiber ◽  
Fiber Volume ◽  
Fibrous Network ◽  
Porosity And Permeability ◽  
The Impact

This paper presents an experimental study and modeling of the influence of surface density and fiber length on the permeability of novel nonwoven flax fiber manufactured by the paper making process. Firstly, the relation between surface density, fiber lengths and pore size distribution measured with a porometer capillary instrument is reported in this study. The results show that higher surface density gives a denser fibrous network with a low porosity rate and longer fiber decreases the total number of fibers and increases the pore size for a given surface density. A liquid permeability study was then carried out to identify the impact of surface density, short fiber length and fiber volume fraction on in-plane impregnation of the reinforcement. Permeability was found to be inversely proportional to the reinforcement of surface density. In contrast, an increase of the fiber length increases the in-plane permeability of the reinforcement. Finally, a mathematical modeling is proposed to predict the permeability behavior of these innovative natural fiber webs.

Determination of the Directional Dependent In-Plane Thermal Conductivity of K63B12 Pitch-Fiber/Epoxy Composite

2004 ◽  
Author(s):  
Jessica N. McClay ◽  
Peter Joyce ◽  
Andrew N. Smith
Keyword(s):  
Thermal Conductivity ◽  
Thermal Management ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Epoxy Composite ◽  
Fiber Composite ◽  
Fiber Volume ◽  
State Technique ◽  
Fiber Composite Materials

Measurements of the in-plane thermal conductivity and the directional dependence of Mitsubishi K63B12 pitch-fiber/Epoxy composite from Newport Composites are reported. This composite is being explored for use in the Avanced Seal Delivery System for effective thermal management. The thermal conductivity was measured using a steady state technique. The experimental results were then compared to a model of the thermal conductivity based on the direction of the fibers. These estimates are based on the properties of the constituent materials and volume of fibers in the sample. Therefore the density and the fiber volume fraction were experimentally measured. The thermal conductivity is clearly greatest in the direction of the fibers and decreases as the fibers are rotated off axis. In the case of pitch fiber composite materials, the contribution of the fibers to the thermal conductivity dominates. The experimental data clearly followed the correct trends; however, the measured values were 25% to 35% lower than predicted.

On the Actuation Authority of Adaptive Sandwich Beam with Composite Actuators: Coupled Finite Element Analysis

2012 ◽  
Vol 585 ◽  
pp. 332-336 ◽  
Author(s):  
K. Venkata Rao ◽  
S. Raja ◽  
T. Munikenche Gowda
Keyword(s):  
Numerical Experiments ◽  
Volume Fraction ◽  
Fiber Composite ◽  
Sandwich Beam ◽  
Beam Theory ◽  
Beam Element ◽  
Fiber Volume ◽  
Element Analysis ◽  
Active Fiber ◽  
Macro Fiber Composite

A two noded active sandwich beam element is formulated by employing layerwise Timoshenko’s beam theory. Displacement continuity conditions are imposed between different layers of the sandwich. This element is used to model an adaptive sandwich beam with macro-fiber composite (MFC) as extension actuator and shear actuated fiber composite (SAFC) as shear actuator. Influence of thickness and volume fraction of the active fiber (PZT-5A and single crystal PMN-PT) in the composite actuators on the actuation performance of the sandwich beam is investigated. Based on several numerical experiments, it is found that the PMN-PT based shear actuators give maximum actuation authority for the volume fraction of the fibers in the range of 80%-85%, whereas in case of PZT-5A based shear actuators the actuation authority remains maximum for the fiber volume fractions 80% and above.

A Study on the Thermoelastic Analysis in Shear Deformable Discontinuous Composites

2004 ◽  
Vol 261-263 ◽  
pp. 645-650
Author(s):  
Hong Gun Kim
Keyword(s):  
Thermal Stresses ◽  
Volume Fraction ◽  
Coefficient Of Thermal Expansion ◽  
Fiber Composite ◽  
Element Model ◽  
Short Fiber ◽  
Elastic Stresses ◽  
Fiber Aspect Ratio ◽  
The Matrix ◽  
Lag Model

A stress analysis has been performed to evaluate the thermally induced elastic stresses which can develop in a short fiber composite due to coefficient of thermal expansion (CTE) mismatch. An axisymmetric finite element model with the constraint between cells has implemented to find the magnitude of thermoelastic stresses in the fiber and the matrix as a function of volume fraction, CTE ratio, modulus ratio, and fiber aspect ratio. It was found that the matrix end regions fall under significant thermal stresses that have the same sign as that of the fibers themselves. Furthermore, it was found that the stresses vary along the fiber and fiber end gap in the same manner as that obtained in a shear-lag model during non-thermal mechanical loading.

Fiber-Matrix Interfacial Area Reduction in Fiber Reinforced Cements and Concretes at Moderate to High Fiber Volume Fractions

1994 ◽  
Vol 370 ◽  
Author(s):  
Gebran N. Karam
Keyword(s):  
Mechanical Properties ◽  
Volume Fraction ◽  
Interfacial Area ◽  
Composite Fiber ◽  
Short Fiber ◽  
Published Data ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
High Fiber ◽  
Fiber Matrix

AbstractThe area and properties of the fiber-matrix interface in fiber reinforced cements and concretes determines the amount of stress transferred forth and back between the cement paste and the reinforcement and hence controls the mechanical properties of the composite. Fiber-fiber interaction and overlap of fibers with fibers, voids and aggregates can dramatically decrease the efficiency of the reinforcement by reducing this interfacial area. A simple model to account for this reduction is proposed and ways to integrate it in the models describing the mechanical properties of short fiber reinforced concretes are presented. The parameters of the model are evaluated from previously published data sets and its predictions are found to compare well with experimental observations; for example, it is able to predict the non-linear variation of bending and tensile strength with increasing fiber volume fraction as well as the existence of an optimal fiber content.

Application of Carbon Fiber-Based Composite for Electric Vehicle

2014 ◽  
Vol 896 ◽  
pp. 574-577 ◽  
Author(s):  
Miftahul Anwar ◽  
Indro Cahyono Sukmaji ◽  
Wisnu R. Wijang ◽  
Kuncoro Diharjo
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
Glass Fiber ◽  
External Load ◽  
Volume Fraction ◽  
Fiber Composite ◽  
Impact Testing ◽  
Fiber Volume ◽  
Glass Fiber Composite ◽  
Hybrid Carbon

In the present work, we study how to improve mechanical properties of carbon fiber reinforced plastics (CFRP) in order to increase crashworthiness probability. Experimentally, hybrid carbon /glass fiber composite was made in order to get higher mechanical properties. As a results, with increasing carbon fiber volume fraction (% vol.), tensile strength and flexural strength of the composite are increased. Simulation of impact testing is also performed using data properties taken from the experiment with variation of impact forces on front bumper structure. By varying external load to the bumper, the result shows that higher thickness of hybrid carbon/glass fiber composite has always smaller stress values than thinner one. On the other hand, the displacement of hybrid carbon/glass car bumper increases linearly with increasing external load.

Can the Strength of Brittle Materials be Enhanced?

1992 ◽  
Vol 291 ◽  
Author(s):  
L. Monette ◽  
M. P. Anderson ◽  
G. S. Grest
Keyword(s):  
Computer Model ◽  
Random Distribution ◽  
Load Transfer ◽  
Volume Fraction ◽  
Fiber Composites ◽  
Short Fiber ◽  
Particulate Composites ◽  
Second Phase ◽  
Two Dimensional ◽  
Fiber Volume

ABSTRACTWe have employed a two-dimensional computer model to study the effect of volume fraction of second phase constituents on load transfer (stiffness) and strength in brittle short-fiber composites, i.e. composites containing a random distribution of aligned fibers, and brittle particulate composites. We find that the efficiency of load transfer to the second phase consituent increases with volume fraction in particulate composites, while it decreases for short-fiber composites. The strength of brittle particulate composites is found to decrease, while the strength of brittle short-fiber composites marginally increases only at fiber volume fractions equal or greater than 0.25.

Sign in / Sign up

Export Citation Format

Share Document