Acoustic Metamaterials

MRS Bulletin ◽  
2008 ◽  
Vol 33 (10) ◽  
pp. 931-934 ◽  
Author(s):  
Lee Fok ◽  
Muralidhar Ambati ◽  
Xiang Zhang
Keyword(s):  
Materials Science ◽  
Periodic Structures ◽  
Phononic Crystals ◽  
Acoustic Metamaterials ◽  
Design Development ◽  
Materials Properties ◽  
The Future ◽  
Basic Physics ◽  
Negative Materials

AbstractThe field of engineered materials with designed properties is expected to continue to grow in the future, and metamaterials are instrumental in allowing this freedom of design. Metamaterials, particularly acoustic, are still in the stage of infancy. Acoustic metamaterials are being explored theoretically, but there has been little headway on the experimental front. The design, development, and characterization of acoustic metamaterials will offer many opportunities in materials science. In this article, we review the basic physics of different kinds of acoustic periodic structures with special emphasis on locally resonant acoustic metamaterials. We first survey phononic crystals and then discuss localized resonances in intrinsic and inertial resonating structures of acoustic metamaterials. Finally, we present the ongoing efforts in realizing acoustic metamaterials with negative materials properties and discuss the implications of acoustic metamaterials.

scholarly journals Gradient index phononic crystals and metamaterials

Nanophotonics ◽  
2019 ◽  
Vol 8 (5) ◽  
pp. 685-701 ◽  
Author(s):  
Yabin Jin ◽  
Bahram Djafari-Rouhani ◽  
Daniel Torrent
Keyword(s):  
Refractive Index ◽  
Wave Propagation ◽  
Acoustic Waves ◽  
Effective Properties ◽  
Periodic Structures ◽  
Phononic Crystals ◽  
Ray Theory ◽  
Acoustic Metamaterials ◽  
Propagation Of Waves ◽  
At Will

AbstractPhononic crystals and acoustic metamaterials are periodic structures whose effective properties can be tailored at will to achieve extreme control on wave propagation. Their refractive index is obtained from the homogenization of the infinite periodic system, but it is possible to locally change the properties of a finite crystal in such a way that it results in an effective gradient of the refractive index. In such case the propagation of waves can be accurately described by means of ray theory, and different refractive devices can be designed in the framework of wave propagation in inhomogeneous media. In this paper we review the different devices that have been studied for the control of both bulk and guided acoustic waves based on graded phononic crystals.

Fundamentals, Progress and Perspectives on High-frequency Phononic Crystals

2022 ◽  
Author(s):  
Yu Cang ◽  
Yabin Jin ◽  
Bahram Djafari-Rouhani ◽  
George Fytas
Keyword(s):  
Information And Communication Technologies ◽  
Elastic Waves ◽  
Periodic Structures ◽  
Communication Technologies ◽  
Phononic Crystals ◽  
Nanometer Scale ◽  
Research Directions ◽  
Optomechanical Systems ◽  
Information And Communication

Abstract Phononic crystals (PnCs) are capable to manipulate the flow of elastic energy through their periodic structures and emerge as a promising field in the last two decades. Thanks to the advances in microfabrication technologies and developments of multifunctional materials, the engineering of periodic structures moves forward to the nanometer scale. Hence, the relevant frequencies of elastic waves are pushed toward the gigahertz regime where strong photon-phonon interactions trigger the applications of PnCs towards information and communication technologies. In this review, we present the experimental achievements on hypersonic PnCs involving microfabrication technologies to realize the desired structures and characterization of their band structures for unraveling phonon propagation modulation. Some application-orientated research directions are proposed in terms of advances in fabrication and characterization technologies and the development of electro-optomechanical systems.

Analysis of Periodicity Termination in Phononic Crystals

2011 ◽  
Author(s):  
Bruce L. Davis ◽  
Andrew S. Tomchek ◽  
Edgar A. Flores ◽  
Liao Liu ◽  
Mahmoud I. Hussein
Keyword(s):  
Band Gap ◽  
Timoshenko Beam ◽  
Periodic Structures ◽  
Beam Theory ◽  
Phononic Crystals ◽  
Timoshenko Beam Theory ◽  
Band Gaps ◽  
Pass Band ◽  
Unit Cells

While resonant propagation modes are non-existent within band gaps in infinite periodic structures, it is possible for anomalous band-gap resonances to appear in finite periodic structures. We establish two criteria for the characterization of band-gap resonances and propose approaches for their elimination. By considering flexural periodic beams, we show that as the number of unit-cells is increased the vibration response corresponding to band-gap resonances (1) does not shift in frequency, and (2) drops in amplitude. Both these outcomes are not exhibited by regular pass-band resonances, nor by resonances in finite homogenous beams when the length is changed. Our conclusions stem from predictions based on Timoshenko beam theory coupled with matching experimental observations.

Applications of Transmission Electron Microscopy in the Characterization of Metal Machinability

1968 ◽  
Vol 26 ◽  
pp. 442-443 ◽  
Author(s):  
L.E. Murr ◽  
A.B. Draper
Keyword(s):  
Electron Microscopy ◽  
State Physics ◽  
Test Material ◽  
Milling Machine ◽  
Rotary Table ◽  
Solid State Physics ◽  
Materials Properties ◽  
Transmission Electron ◽  
Selection Of

The industrial characterization of the machinability of metals and alloys has always been a very arbitrarily defined property, subject to the selection of various reference or test materials; and the adoption of rather naive and misleading interpretations and standards. However, it seems reasonable to assume that with the present state of knowledge of materials properties, and the current theories of solid state physics, more basic guidelines for machinability characterization might be established on the basis of the residual machined microstructures. This approach was originally pursued by Draper; and our presentation here will simply reflect an exposition and extension of this research.The technique consists initially in the production of machined chips of a desired test material on a horizontal milling machine with the workpiece (specimen) mounted on a rotary table vice. A single cut of a specified depth is taken from the workpiece (0.25 in. wide) each at a new tool location.

Applications of ultramicrotomy for materials characterization

1993 ◽  
Vol 51 ◽  
pp. 232-233
Author(s):  
R.T. Blackham ◽  
J.J. Haugh ◽  
C.W. Hughes ◽  
M.G. Burke
Keyword(s):  
Materials Science ◽  
Microstructural Analysis ◽  
Analytical Electron Microscopy ◽  
Austenitic Stainless Steels ◽  
Specimen Preparation ◽  
Preparation Technique ◽  
Thermally Induced ◽  
Radiation Induced ◽  
Characterization Of Materials

Essential to the characterization of materials using analytical electron microscopy (AEM) techniques is the specimen itself. Without suitable samples, detailed microstructural analysis is not possible. Ultramicrotomy, or diamond knife sectioning, is a well-known mechanical specimen preparation technique which has been gaining attention in the materials science area. Malis and co-workers and Glanvill have demonstrated the usefulness and applicability of this technique to the study of a wide variety of materials including Al alloys, composites, and semiconductors. Ultramicrotomed specimens have uniform thickness with relatively large electron-transparent areas which are suitable for AEM anaysis.Interface Analysis in Type 316 Austenitic Stainless Steel: STEM-EDS microanalysis of grain boundaries in austenitic stainless steels provides important information concerning the development of Cr-depleted zones which accompany M23C6 precipitation, and documentation of radiation induced segregation (RIS). Conventional methods of TEM sample preparation are suitable for the evaluation of thermally induced segregation, but neutron irradiated samples present a variety of problems in both the preparation and in the AEM analysis, in addition to the handling hazard.

scholarly journals Synthesis and Characterization of a Bioconjugate Based on Oleic Acid and L-Cysteine

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1791
Author(s):  
Marco Vizcarra-Pacheco ◽  
María Ley-Flores ◽  
Ana Mizrahim Matrecitos-Burruel ◽  
Ricardo López-Esparza ◽  
Daniel Fernández-Quiroz ◽  
...  
Keyword(s):  
Oleic Acid ◽  
Materials Science ◽  
Critical Micellar Concentration ◽  
Synthesis And Characterization ◽  
New Materials ◽  
Visible Spectroscopy ◽  
Amide Bonds ◽  
Transmission Electron ◽  
Self Assembled

One of the main challenges facing materials science today is the synthesis of new biodegradable and biocompatible materials capable of improving existing ones. This work focused on the synthesis of new biomaterials from the bioconjugation of oleic acid with L-cysteine using carbodiimide. The resulting reaction leads to amide bonds between the carboxylic acid of oleic acid and the primary amine of L-cysteine. The formation of the bioconjugate was corroborated by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and nuclear magnetic resonance (NMR). In these techniques, the development of new materials with marked differences with the precursors was confirmed. Furthermore, NMR has elucidated a surfactant structure, with a hydrophilic part and a hydrophobic section. Ultraviolet-visible spectroscopy (UV-Vis) was used to determine the critical micellar concentration (CMC) of the bioconjugate. Subsequently, light diffraction (DLS) was used to analyze the size of the resulting self-assembled structures. Finally, transmission electron microscopy (TEM) was obtained, where the shape and size of the self-assembled structures were appreciated.

scholarly journals Hydropower, Geothermal, and Ocean Energy

MRS Bulletin ◽  
2008 ◽  
Vol 33 (4) ◽  
pp. 389-395 ◽  
Author(s):  
Ralph E.H. Sims
Keyword(s):  
Renewable Energy ◽  
Large Scale ◽  
New Technologies ◽  
Materials Science ◽  
Development Stage ◽  
Design Development ◽  
Ocean Energy ◽  
Improve Design ◽  
And Performance ◽  
Improve Reliability

AbstractSome forms of renewable energy have long contributed to electricity generation, whereas others are just emerging. For example, large-scale hydropower is a mature technology generating about 16% of global electricity, and many smaller scale systems are also being installed worldwide. Future opportunities to improve the technology are limited but include upgrading of existing plants to gain greater performance efficiencies and reduced maintenance. Geothermal energy, widely used for power generation and direct heat applications, is also mature, but new technologies could improve plant designs, extend their lifetimes, and improve reliability. By contrast, ocean energy is an emerging renewable energy technology. Design, development, and testing of a myriad of devices remain mainly in the research and development stage, with many opportunities for materials science to improve design and performance, reduce costly maintenance procedures, and extend plant operating lifetimes under the harsh marine environment.

Sign in / Sign up

Export Citation Format

Share Document