Effect of Minor Alloying Element on Dispersing Nano-particles in ODS Steel

2006 ◽  
Vol 981 ◽  
Author(s):  
Y. Uchidi ◽  
S. Ohnuki ◽  
N. Hashimoto ◽  
T. Suda ◽  
T. Nagai ◽  
...  
Keyword(s):  
Hot Extrusion ◽  
Complex Oxides ◽  
Oxide Dispersion Strengthened ◽  
Ferrite Matrix ◽  
Nano Particles ◽  
High Temperature Strength ◽  
Ods Steel ◽  
Ma Process ◽  
Materials Used ◽  
Ti Addition

AbstractFrom the irradiation resistance and high-temperature strength, oxide dispersion strengthened (ODS) ferritic steels are candidate materials for advanced and fusion reactors. For the development of advanced steels the key issue is to homogenize nano-particles into matrix. Recent studies have indicated that Ti addition can homogenize Y-Ti complex particles into ferrite matrix, but the reason of the effect of additional elements has not been clarified. In this model study, we focus on the effect of additional elements, such as IV and V families and other oxide formers, which can control potentially the distribution of the oxide particles. The materials used in this study were based on Fe-9Cr-Y2O3 alloys which were mechanical alloyed (MA) from the powder of Fe, Cr and Y2O3, which was added systematically with the element of Ti, Zr, Ta, V, Nb, Hf, Al, Si and others. Usually ODS fabrication process is required for hot extrusion, but we annealed up to 1150 C for simplify the microstructure. To evaluate the distribution of ODS particles; we used TEM equipped with EDS after electro-polishing or FIB techniques. (1) In the case of Si or Al addition, oxides were disappeared after MA process, which means Y2O3 and other elements should be in solution at non-equilibrium condition. Two types of oxides of Y2O3 and Al2O3 or SiO2 developed after the annealing at 850 C, but only complex oxides were developed after the annealing at 1150 C. This result suggests that the oxide formation is independent process for Y and Si or Al. (2) In the case of Ti addition, oxides also were disappeared after MA process, but developed after annealing at 1150 C. This means that Ti can stabilize complex oxides of Y and Ti, and enhance the fine distribution of the oxides comparing with simple Fe-9Cr-Y2O3 alloy.

Role of Cr and Ti Contents on the Microstructure and Mechanical Properties of ODS Ferritic Steels

2008 ◽  
Vol 59 ◽  
pp. 308-312 ◽  
Author(s):  
Zbigniew Oksiuta ◽  
Nadine L. Baluc
Keyword(s):  
Mechanical Properties ◽  
Uniform Elongation ◽  
Hot Isostatic Pressing ◽  
Charpy Impact ◽  
Oxide Dispersion Strengthened ◽  
Total Elongation ◽  
Nano Particles ◽  
Ferritic Steels ◽  
Ods Steel ◽  
Microstructure And Mechanical Properties

Six oxide dispersion strengthened (ODS) ferritic steels, with the composition of Fe-(12-14)Cr-2W-(0.1-0.3-0.5)Ti-0.3Y2O3 (wt.%), have been prepared by mechanically alloying elemental powders of Fe, Cr, W, and Ti with Y2O3 nano-particles followed by hot isostatic pressing. The influence of the chemical composition on the microstructure and mechanical properties of various materials was studied. It was found that the chromium content has a significant influence on the microstructure and mechanical properties of the compacted ingots. The 14Cr ODS steel exhibits slightly higher ultimate tensile strength and yield strength values than the 12Cr ODS steel. The total elongation and uniform elongation of both materials, in general, decrease with raising the test temperature, although in the case of the 12Cr ODS steel the elongation is about 30% higher than that of the 14Cr ODS material. In what concerns the effect of titanium content it can be concluded that variations between 0.1 and 0.3% have no visible effects on the microstructure and Charpy impact properties of compacted specimens. However, the microstructure of specimens with 0.5%Ti contains large TiO2 particles with a size in the range of 50-500nm, which have detrimental influence on the mechanical properties of that material.

Mechanical and Microstructural Properties of Al-Added ODS Ferritic Steel

2012 ◽  
Vol 567 ◽  
pp. 49-53 ◽  
Author(s):  
Jae Hoon Lee
Keyword(s):  
Hot Extrusion ◽  
Oxide Dispersion Strengthened ◽  
Tensile Tests ◽  
Ods Steel ◽  
Dispersed Particles ◽  
Oxide Particles ◽  
Ods Steels ◽  
Ductile To Brittle Transition ◽  
The Difference ◽  
Mechanical And Microstructural Properties

18%Cr-oxide dispersion strengthened (ODS) ferritic steels with and without 5%Al have been produced by mechanical alloying and hot-extrusion. The microstructure of the ODS steels has been characterized by means of electron microscopy (SEM, TEM), showing that in the Al-added ODS steel, the semi-coherent and coherent oxide particles are about 75% and 10%, respectively. It was found that the coherency of oxide particles depends on the size of dispersed particles. Tensile tests performed between room temperature and 973 K denote that the ultimate tensile strength of Al-free ODS steel is higher than that of Al-added one. The ductility values of both materials are sufficiently high. Impact tests reveal that the ductile-to-brittle transition temperature of Al-free ODS steel are higher than that of Al-added ODS steel; however, the upper shelf energy of 18%Cr-ODS steel is substantially smaller in comparison to the Al-added one. It is considered that the difference in mechanical properties between Al-free and Al-added ODS steels is caused by the smaller, stable titania + yttria complex oxides dispersed in the Al-free ODS steel.

Microstructure Evolution of Mechanically Alloyed ODS Ferritic Steels during Hot Extrusion

2011 ◽  
Vol 172-174 ◽  
pp. 721-726 ◽  
Author(s):  
Mathieu Couvrat ◽  
Laurent Chaffron ◽  
Daniel Nunes ◽  
Patrick Bonnaillie ◽  
Marie Hélène Mathon ◽  
...  
Keyword(s):  
Dynamic Recovery ◽  
Hot Extrusion ◽  
Oxide Dispersion Strengthened ◽  
Mechanically Alloyed ◽  
Material Microstructure ◽  
Consolidation Process ◽  
Ods Steel ◽  
Complex Process ◽  
Steel Bars ◽  
Nano Cluster

Direct hot extrusion of powder is the standard consolidation process to transform mechanically alloyed Oxide Dispersion Strengthened (ODS) steels into fully dense bars. It is a complex process including several steps. In this study, ODS steel bars were extruded and the material microstructure was characterized by TEM observations associated to SANS after each step. It was shown that the nano-cluster nucleation occurs during the powder pre-heating before hot-extrusion. During extrusion, the ferritic matrix undergoes a dynamic recovery but no further change of the nano-cluster distribution is observed.

Manufacturing of ODS RAFM Steel: Mechanical and Microstructural Characterization

2016 ◽  
Vol 879 ◽  
pp. 1639-1644
Author(s):  
Claudio Testani ◽  
Paolo Emilio di Nunzio ◽  
Ilaria Salvatori
Keyword(s):  
Hot Extrusion ◽  
Microstructural Characterization ◽  
Oxide Dispersion Strengthened ◽  
Processing Parameters ◽  
Ultimate Tensile Stress ◽  
Irradiation Damage ◽  
Ods Steel ◽  
Structural Applications ◽  
Fusion Applications ◽  
Rafm Steel

Ferritic ODS 14Cr steels reinforced by means of Yttrium oxide nanoclusters represent one of the options for future structural applications in nuclear Generation IV reactors. Due to their high tensile properties and resistance to irradiation damage, Oxide Dispersion Strengthened Steels (ODS-S) have been suggested for nuclear fusion applications. The present paper describes the experimental procedure of mechanical alloying, canning and hot extrusion adopted to produce ODS rods. The effect of variations in the processing parameters are also discussed. Hot extrusion has been successfully applied to produce a batch of about 10 kg of ODS steel. Full size ASTM E21 and E8 specimens have been tested from room temperature up to 800 °C. The microstructure characterization of the manufactured materials has been carried out by transmission electron microscopy. Ultimate tensile stress higher than 1350 MPa have been obtained in the as-extruded material and higher than 1100 MPa in samples annealed for 4 hours at 800 °C.

scholarly journals ODS EUROFER Steel Strengthened by Y-(Ce, Hf, La, Sc, and Zr) Complex Oxides

Metals ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 1148 ◽  
Author(s):  
Roman Husák ◽  
Hynek Hadraba ◽  
Zdeněk Chlup ◽  
Milan Heczko ◽  
Tomáš Kruml ◽  
...  
Keyword(s):  
Grain Size ◽  
Yield Strength ◽  
Complex Oxides ◽  
Oxide Dispersion Strengthened ◽  
Interparticle Spacing ◽  
Oxide Dispersion ◽  
Strengthening Effect ◽  
Dispersion Strengthening ◽  
Doping Element ◽  
Average Grain Size

Oxide dispersion-strengthened (ODS) materials contain homogeneous dispersions of temperature-stable nano-oxides serving as obstacles for dislocations and further pinning of grain boundaries. The strategy for dispersion strengthening based on complex oxides (Y-Hf, -Zr, -Ce, -La) was developed in order to refine oxide dispersion to enhance the dispersion strengthening effect. In this work, the strengthening of EUROFER steel by complex oxides based on Y and elements of the IIIB group (lanthanum, scandium) and IVB group (cerium, hafnium, zirconium) was explored. Interparticle spacing as a dispersoid characteristic appeared to be an important factor in controlling the dispersion strengthening contribution to the yield strength of ODS EUROFER steels. The dispersoid size and average grain size of ODS EUROFER steel were altered in the ranges of 5–13 nm and 0.6–1.7 µm, respectively. Using this strategy, the yield strength of the prepared alloys varied between 550 MPa and 950 MPa depending on the doping element.

scholarly journals Microstructure, Grain Growth and Hardness of Nanostructured Ferritic ODS Steel Powder during Annealing

2021 ◽  
Author(s):  
Krzysztof Nowik ◽  
Zbigniew Oksiuta
Keyword(s):  
Dislocation Density ◽  
Size Distribution ◽  
Hot Isostatic Pressing ◽  
Domain Size ◽  
Oxide Dispersion Strengthened ◽  
Alloy Formation ◽  
Nanocrystalline State ◽  
Ferritic Alloy ◽  
Ods Steel ◽  
Double Phase

AbstractNanocrystalline oxide-dispersion strengthened ferritic alloy formation and its annealing behavior were examined through modern X-ray diffraction pattern analysis and supplemented by microhardness and microscopic measurements. The basic microstructure features, with particular emphasis on evolution of domain size distribution and defect content during mechanical and thermal treatment, were quantified via the whole powder pattern modeling approach. The microstructure of the powdered alloy, formed during mechanical alloying, evolved toward nanocrystalline state consisting of narrow dispersion of very fine crystallites with substantial dislocation density, which exhibited relatively high stability against elevated temperature. It was shown that crystallite size is seriously sustained by the grain-boundary strain, therefore coarsening of grains begins only after the density of dislocations drops below certain level. Obtaining correct results for the annealing-related data at specific temperature range required the incorporation of the “double-phase” model, indicating possible bimodal domain size distribution. The dislocation density and grain size were found not to be remarkably affected after consolidation by hot isostatic pressing.

Characterization of oxide particles in ODS austenitic stainless steel after heavy ion irradiation up to high doses

2011 ◽  
Vol 1298 ◽  
Author(s):  
Hiroshi Oka ◽  
Yosuke Yamazaki ◽  
Hiroshi Kinoshita ◽  
Naoyuki Hashimoto ◽  
Somei Ohnuki ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Ion Irradiation ◽  
Hot Extrusion ◽  
Oxide Dispersion Strengthened ◽  
Complex Oxide ◽  
Heavy Ion ◽  
Oxide Particles ◽  
The Difference ◽  
High Doses

ABSTRACTOxide dispersion strengthened austenitic stainless steel (ODS316), which is based on advanced SUS316 steel, has been developed by mechanically alloying and hot extrusion. Hafnium and titanium were added to make a fine distribution of oxide particles. The stability of oxide particles dispersed in ODS316 under irradiation was evaluated after 250 keV Fe+ irradiation up to high doses at 500 °C. TEM observation and EDS analysis indicated that fine complex oxide particles with Y, Hf and Ti were mainly dispersed in the matrix. There are no significant changes in the distribution and the size of oxide particles after irradiation. It was also revealed that the constitution ratio of Ti in complex oxide appeared to be decreased after irradiation. This diffuse-out of Ti during irradiation could be explained by the difference in oxide formation energy among alloying elements.

scholarly journals Microstructure and Mechanical Properties of 14Cr-ODS Steels with Zr Addition

2019 ◽  
Vol 38 (2019) ◽  
pp. 404-410 ◽  
Author(s):  
Weijuan Li ◽  
Haijian Xu ◽  
Xiaochun Sha ◽  
Jingsong Meng ◽  
Zhaodong Wang
Keyword(s):  
Mechanical Properties ◽  
Hot Isostatic Pressing ◽  
Oxide Dispersion Strengthened ◽  
Nominal Composition ◽  
Ods Steel ◽  
Zr Addition ◽  
Microstructure And Mechanical Properties ◽  
The Matrix ◽  
Ods Steels ◽  
The Impact

AbstractIn this study, oxide dispersion strengthened (ODS) ferritic steels with nominal composition of Fe–14Cr–2W–0.35Y2O3 (14Cr non Zr-ODS) and Fe–14Cr–2W–0.3Zr–0.35Y2O3 (14Cr–Zr-ODS) were fabricated by mechanical alloying (MA) and hot isostatic pressing (HIP) technique to explore the impact of Zr addition on the microstructure and mechanical properties of 14Cr-ODS steels. Microstructure characterization revealed that Zr addition led to the formation of finer oxides, which was identified as Y4Zr3O12, with denser dispersion in the matrix. The ultimate tensile strength (UTS) of the non Zr-ODS steel is about 1201 MPa, but UTS of the Zr-ODS steel increases to1372 MPa, indicating the enhancement of mechanical properties by Zr addition.

scholarly journals Microstructure of Oxide Dispersion Strengthened Steel With Cr Content Variation

2020 ◽  
Vol 21 (1) ◽  
pp. 35
Author(s):  
Marzuki Silalahi ◽  
Bernadus Bandriyana ◽  
Arbi Dimyati ◽  
Bambang Sugeng ◽  
Syahfandi Ahda ◽  
...  
Keyword(s):  
High Temperature ◽  
Phase Distribution ◽  
Oxide Dispersion Strengthened ◽  
High Energy ◽  
Oxide Dispersion ◽  
X Ray ◽  
Hardness Tester ◽  
Cr Content ◽  
Ods Steel ◽  
The Matrix

Microstructure and phase distribution of innovative Oxide Dispersion Strengthened (ODS) steel based on Fe-Cr-ZrO2 particularly for application at high temperature reactor with variation of Cr content was analysed. The alloy was synthesized with Cr composition variation of  15, 20 and 25 wt.% Cr, while zirconia dispersoid kept constant at 0.50 wt.%. The samples was synthesized by mechanical alloying comprising of high energy milling for 3 hours followed by vibrated compression with iso-static load at 20 ton. The final consolidation was performed via sintering process for 4 minutes using the Arc Plasma Sintering (APS) technique, a new method developed in BATAN especially for synthesizing high temperature materials. The samples were then characterized by means of scanning electron microscopy (SEM) with energy dispersed X-ray (EDX) analysis capability and X-ray diffraction. The mechanical property of hardness was measured using standard Vickers micro hardness tester to confirmed the microstructure analysis.  The results show that the microstructure of the ODS alloy samples in all variation of Cr content consists generally of cubic Fe-Cr matrix phase with small of porosity and  Zirconia particles distributed homogenously in and around the matrix grains. The achievable hardness was between 142 and 184 HVN dependent consistently on Cr content in which Cr element may cause grain refining that in turn increase the hardness.

Sign in / Sign up

Export Citation Format

Share Document