scholarly journals Komposisi Gulma pada Berbagai Jarak Tanam Padi Secara IPAT–BO dan Konvensional

Jurnal Agro ◽  
10.15575/77 ◽  
2014 ◽  
Vol 1 (1) ◽  
pp. 14-21
Author(s):  
Merry Antralina ◽  
Yuyun Yuwariah ◽  
Tualar Simarmata
Keyword(s):  
Conventional Treatment ◽  
Rice Yield ◽  
Domination Number ◽  
Dry Weight ◽  
Plant Spacing ◽  
Irrigation Methods ◽  
Spacing Factor ◽  
Main Plot ◽  
Four Levels ◽  
Plot Design

Penelitian yang bertujuan mempelajari komposisi gulma tanaman padi sawah pada sistem bertanam secara IPAT-BO dan konvensional  telah dilaksanakan pada bulan April 2013 sampai bulan Juli 2013 di Kelompok Tani Sadang Mukti, Kampung Sadang Sari, Kabupaten Bandung Jawa Barat yang terletak pada ketinggian 668 m di atas permukaan laut. Penelitian menggunakan metode eksperimen, dengan Rancangan Petak Terpisah, 3 kali ulangan, sebagai petak utama  yaitu faktor metode pengairan (M), yang terdiri dari pengairan secara IPAT-BO dan konvensional, sedangkan anak petak adalah jarak tanam (J), yang terdiri dari : 30 x 35 cm, 30 x 25 cm, 35 x 35 cm,dan 30 x 30 cm. Hasil penelitian menunjukkan bahwa terjadi interaksi antara metode pengairan dan jarak tanam terhadap nilai jumlah dominasi gulma, dan bobot kering gulma.Gulma yang dominan pada perlakuan IPAT-BO lebih banyak dibanding perlakuan konvensional, sedangkan bobot kering gulma terberat terjadi pada metode IPAT-BO dengan jarak tanam 35 cm x 35 cm. The research was aimed to assess the effect of different plant spacing to weed composition and lowland rice yield in SOBARI and conventional irrigation methods. The experiment had been conducted in Farmers Groups Sadang Mukti, Sadang Sari Village, Bandung District, West Java at 668 m above sea level, from April 2013 to July 2013. It was arranged in split plot design, consisted of two factor, irrigation methods factor (M) as main plot, namely: irrigation methods in SOBARI (m1) and conventional (m2),subplot was plant spacing factor (J), which consisted of four levels of factors, namely: 30 x 35 cm, 30 x 25 cm, 35 x 35 cm, and 30 x 30 cm. The results showed that there was interaction between irrigation method and plant spacing on the value of domination number of weeds, and weed dry weight. Dominantweeds in SOBARI method were more than conventional treatment, weed dry weight in SOBARI method with spacing of 35 cm x 35 cm had greater than the other treatments.

scholarly journals Pengaruh Pupuk Organik dan Jarak Tanam terhadap C-Organik, Populasi Jamur Tanah dan Bobot Kering Akar serta Hasil Padi Sawah pada Inceptisols Jatinangor, Sumedang

2019 ◽  
Vol 3 (1) ◽  
pp. 28
Author(s):  
Ida Adviany ◽  
Dick Dick Maulana
Keyword(s):  
Soil Fungi ◽  
Rice Yield ◽  
Organic Fertilizer ◽  
Dry Weight ◽  
Plant Spacing ◽  
Organic C ◽  
Main Effect ◽  
Two Factors ◽  
Rice Yields ◽  
Main Plot

<p>This experiment was conducted to study the effect of organic fertilizer and plant spacing on organic-C, soil fungi population, dried weight root and rice yield (<em>Oryza sativa</em> L.) grown on Inceptisols Jatinangor. This experiment was arranged in split plot design, consisted of two factors with 12 treatments and three replications. The first factor as main plot was organic fertilizer, which dosage of 0, 200, 400 and 600 kg ha<sup>-1</sup> respectively. The second factor as sub plot was plant spacing, which of 25 cm x 25 cm , 30 cm x 30 cm and 35 cm x 35 cm, respectively. The result of experiment showed that there were no interaction effect between organic fertilizer and plant spacing on organic-C, soil fungi population, root dry weight and rice yields. The main effect of plant spacing treatment gave significantly effected on dried weight of root and rice yields per plot and per 10 stool. The highest rice yield per plot, 9.276 kg plot<sup>-1 </sup>(4.638 t ha<sup>-1</sup>)was achieved from plants with  spacing 25 cm x 25 cm and the highest rice yield per 10 stools was 747 g from plants with spacing.35 cm x 35 cm.</p>

scholarly journals Analisis Pertumbuhan dan Produksi Kedelai yang Diberi Perlakuan dengan Ekstrak Sentang (Azadirachta excelsa (Jack)) dan Mindi (Melia azedarach L.)

2020 ◽  
Vol 11 (3) ◽  
pp. 163-169
Author(s):  
Rummi Azahra Gumilar ◽  
Nurheni Wijayanto ◽  
Arum Sekar Wulandari
Keyword(s):  
Block Design ◽  
Dry Weight ◽  
Agroforestry System ◽  
Melia Azedarach ◽  
Randomized Block Design ◽  
Main Plot ◽  
Growth Production ◽  
Soybean Plants ◽  
Four Levels ◽  
Plot Design

Allelopathy interaction can occur between A. excelsa or M. azedarach with soybean plants which is planted as intercrops in agroforestry system. The objectives of this study were to analyze the effect of root, leaf, and twig ectracts of A. excelsa and M. azedarach on growth and production of soybean. This study was conducted in open fields using a split-split plot design inside randomized block design. The main plot was the plant species as extract materials consisted of Azadirachta excelsa and Melia Azedarach. The subplot was the part of the plant consisted of root, leaf, and twig. Sub-subplot was the concentration of the extract consisted of four levels, 0% (control), 1.25%, 2.5%, and 5%. Each treatment was repeated for 3 time. Result of this study showed that the root, leaf and twig extracts of A. excelsa and M. azedarach did not give significant effect to the height growth, dry weight, as well as soybean production. Key words: agroforestry, allelopathy, growth, production

scholarly journals GROWTH AND PRODUCTION OF POHPOHAN {Pilea melastomoides (Poir.) Wedd.} DAN REUNDEU (Staurogyne elongate Kuntze) AND ON VARIOUS SHADING LEVELS

2018 ◽  
Vol 3 (1) ◽  
Author(s):  
Intan Apriani Sutandi ◽  
Arifah Rahayu ◽  
Nur Rochman
Keyword(s):  
Plant Height ◽  
Dry Weight ◽  
Leaf Length ◽  
Shade Treatment ◽  
Randomized Design ◽  
Seed Origin ◽  
Main Plot ◽  
Completely Randomized Design ◽  
Four Levels ◽  
Plot Design

This study was aimed at assessing the effects of shade on the growth, productivity of indigenous vegetables pohpohan and reundeu.   A split-plot design was used.  The main plot was shade treatments consisting of four levels, namely 0% (no shade), 25%,  50%, and 75%.  The subordinate plot was the seed origins, namely Sukabumi, Cianjur, and Bogor.  The arrangement of the main and sub plots was done based on a completely randomized design.  Results showed that  in pohpohan increased plant height was found in 50% shade treatment, while leaf length and width was found to be increased in shade treatment up to 75%.  Leaf length and width of pohpohan plants of Bogor origin were higher than those of pohpohan plants of Cianjur and Sukabumi origins. In reundeu plants, no effects of shade treatments were found in all variables measured.  Reundeu plants of Bogor and Cianjur origin were found to be superior in plant height, leaves number, length, and width, and fresh and dry  weight. Pohpohan plants were potential to be grown under shades.    Key words: seed origin, plant height, pohpohan, reundeu, Bogor  

scholarly journals EFEKTIFITAS FUNGI MIKORIZA ARBUSKULA (FMA) SERTA PUPUK NITROGEN DAN FOSFAT TERHADAP PERTUMBUHAN SEMAI JABON (Anthocephallus cadamba Roxb.) Effectiveness of Arbuscula Mycorrhizal Fungi (AMF) Nitrogen and Phosphate Fertilizer toward Jabon ........

2017 ◽  
Vol 8 (1) ◽  
pp. 20-25
Author(s):  
Fransisca Yosina Regina Luturmas ◽  
Sri Wilarso Budi R. ◽  
Irdika Mansur
Keyword(s):  
Plant Height ◽  
Mycorrhizal Fungi ◽  
Dry Weight ◽  
Phosphate Fertilizer ◽  
Soil Types ◽  
Shoot Dry Weight ◽  
Main Plot ◽  
Fast Growing Species ◽  
Glomus Sp ◽  
Plot Design

Jabon (Anthocephallus cadamba Roxb.) is one of fast-growing species with high economical value, and well adapted on some of soil types. The aims of this research were to analyze the effectiveness of AMF species isolated from Samama (Anthocephallus macrophyllus (Roxb.) Havil) and to determine the favorable dose of nitrogen and phosphate fertilizer for Jabon growth. The research was conducted CRD-split plot design main plot was Acaulospora sp.1 (M1), Glomus sp.1 (M2), Acaulospora sp.2 (M3), Acaulospora sp.3 (M4), Glomus sp.2 (M5). While the fertilizer as the sub-plot, consist of control (P0), urea 0.5g+rockphosphat 2g (P1), urea 1g+rockphosphat 4g (P2). The result showed that AMF and fertilizer applications effectively improved Jabon grown, especially in height, stem diameter, and shoot dry weight. The interaction (M4P1) increased plant height 154.73%, diameter 75.38% and shoot dry weight 376.09% compared with control. P1 treatment was better for growth of Jabon that was inoculated by mycorrhiza. Acaulospora sp.1 (M1) originally from Samama without fertilizer had the best effectiveness for Jabon growth.Key words: Acaulospora, indigenous

scholarly journals Performance of Hybrid Rice (Bio-453) In Variation of Spacing and Number of Seedling Per Hill

2020 ◽  
Vol 22 (1) ◽  
pp. 27-37
Author(s):  
D Chowdhury ◽  
M Biswas ◽  
MNH Miah ◽  
P Mandal ◽  
MS Hossain
Keyword(s):  
Hybrid Rice ◽  
Research Work ◽  
Maximum Yield ◽  
Growth And Yield ◽  
Plant Spacing ◽  
Rice Line ◽  
Biological Yield ◽  
Main Plot ◽  
1000 Grain Weight ◽  
Plot Design

Hybrid rice production can ensure to get more yields per unit land. The research work was carried out to evaluate the effect of number of seedling hill-1 and spacing on the growth and yield of hybrid rice line Bio-453. The experiment was laid out in a split-plot design with 3 replications at the field of Agronomy and Haor Agriculture Department of Sylhet Agricultural University, under the AEZ 20 in Kharif-II (Aman) season of 2013. Number of seedling hill-1 was assigned in the main plot and plant spacing in the sub-plot. Two levels of seedling hill-1 viz. NS1 (1 seedling hill-1) and NS2 (2 seedlings hill-1) and five levels of plant spacing viz. Sp1 (15 cm  X 15 cm), Sp2 (15 cm X 20 cm) and Sp3 (20 cm X 20 cm), Sp4 (20 cm X 25 cm) and Sp5 (20 cm X 30 cm) were the treatments. Number of seedling hill-1 and plant spacing showed significant effect in yield and yield contributing parameters except days to maturity, plant height, 1000-grain weight, total tillers hill-1, number of effective tillers hill-1, harvest index and grains panicle-1. Maximum grain yield (9.43 t ha-1), straw yield (16.27 t ha-1) and biological yield (25.70 t ha-1) were obtained from 1 seedling hill-1 (NS1) with the closest spacing 15 cm X 15 cm Therefore,  one seedling hill-1 with 15 cm distance for plant and row to row distance could  ensure maximum yield of hybrid rice line Bio-453. Bangladesh Agron. J. 2019, 22(1): 27-37

scholarly journals Determination of leaf status of soybean varieties on shading : chlorophyll and chloroplast

2019 ◽  
Vol 20 (2) ◽  
pp. 615-620
Author(s):  
LISA MAWARNI ◽  
TENGKU CHAIRUN NISA ◽  
JUSTIN A NAPITUPULU ◽  
KARYUDI KARYUDI
Keyword(s):  
Leaf Area ◽  
Chlorophyll A ◽  
Small Seed ◽  
Main Plot ◽  
Chlorophyll A And B ◽  
Four Levels ◽  
Leaf Greenness ◽  
Better Than ◽  
Plot Design

Abstract. Mawarni L, Nisa TC, Napitupulu JA, Karyudi. 2019. Determination of leaf status of soybean varieties on shading. Biodiversitas 20: 615-620. The shading tolerant soybean varieties could be identified through the character growth such as leaf status. This study was aimed to obtain the shading tolerant of soybean variety based on their seed size and on the leaf status. Design of experiments was a split-plot design with three replications. The level of shading as the main plot with four levels of treatment was without shading, 30%, 50%, and 70% shading. Soybean varieties as the subplot had 4 genotypes namely Anjasmoro, Pangrango, Tanggamus, and Nanti wherein one variety comes with large seed; two come with medium seeds and the other one comes with small seed. The leaf status for determination was the greenness of leaves, the sum of chlorophyll a, chlorophyll b, total chlorophyll a and b, the forms of chloroplasts and leaf area. The soybean varieties with different seed sizes showed the differences only on the leaf area but not on leaf greenness or on the sum of chlorophyll. Nanti variety, having small seed, turns out to have the largest leaf area but is not shade tolerant. The large leaf area may be due to the forming of tetra foliate leaves on Nanti variety. The form of chloroplast of Anjasmoro variety in 70% shading is better than other varieties. Therefore, determining leaf status can identify shading tolerant of soybeans.

scholarly journals Utilization of Industrial Waste Pulp And Palm Oil on Growth and Results of Corn (Zea mays L) On Peat

2020 ◽  
Author(s):  
mulono apriyanto bin sugeng rijanto
Keyword(s):  
Fly Ash ◽  
Palm Oil ◽  
Industrial Waste ◽  
Dry Weight ◽  
Randomized Design ◽  
Straight Line ◽  
Maize Varieties ◽  
Main Plot ◽  
Completely Randomized Design ◽  
Plot Design

This study aims to determine the merits of various industrial waste pulp and palm oil as well as getting the most appropriate formulation ongrowth and yield of maize varieties Earth-3 and NK-212 in peatlands. Research using split plot design using the design of completely randomized design(CRD) and each treatment was repeated 3 times. Varieties as the main plot consists of: (V1): Varieties of Earth-3, (V2): Varieties of NK-212. Treatmentsubplot, consisting of six formulations ameliorant, namely: F1 (60% OPEF + 20% GPB + 10% Dregs + 10% Fly ash), F2(60% OPEF + 10% GPB + 20%Dregs + 10% Fly ash ), F3(60% OPEF + 10% GPB + 10% Dregs + 20% Fly ash), F4(40% OPEF + 30% GPB + 10% Dregs + 20% Fly ash), F5(40%OPEF + 20% GPB + 30% Dregs + 10% Fly ash) and F6(40% OPEF + 10% GPB + 20% Dregs + 30% Fly ash). The data obtained were stat isticallyanalyzed using analysis of variance (ANOVA) followed by HSD test at 5% level.The results showed that various formulations of industrial waste pulp andpalm oil gave similar results to the root dry weight, dry weight of straw, hay root ratio, the diameter of the cob, corncob, corncob without the husk and dryseed weight. It can be seen from the cob generated a large and long and close cob husk well (± 98%), beans straight line with a number of seed rows15-16 rows, as well as a uniform crop diversity, is in conformity with the description.

scholarly journals Produksi Benih Kentang G0 Pada Berbagai Volume dan Frekuensi Fertigasi dengan Sistem Irigasi Tetes (Production of G0 Potato Seed on Many Fertigation Volumes and Frequencies on Drip Irrigation)

2019 ◽  
Vol 29 (1) ◽  
pp. 53
Author(s):  
Meksy Dianawati ◽  
Hilda Farida ◽  
Sri Muhartini
Keyword(s):  
Seed Production ◽  
Drip Irrigation ◽  
Block Design ◽  
Potato Production ◽  
Potato Seed ◽  
Split Plot ◽  
Main Plot ◽  
Four Levels ◽  
Drip Fertigation ◽  
Plot Design

<p>Kentang merupakan sayuran yang memiliki prospek untuk mendukung program diversifikasi pangan. Akan tetapi saat ini produksi di dalam negeri masih rendah akibat penggunaan benih yang kurang bermutu. Sistem irigasi tetes berpeluang untuk diterapkan pada produksi benih kentang G0. Penelitian  bertujuan untuk mengetahui pengaruh frekuensi dan volume fertigasi terhadap produksi benih G0 kentang pada sistem irigasi tetes. Penelitian  dilaksanakan sejak bulan Mei sampai dengan September 2016 di Rumah Kassa Desa Cikahuripan, Lembang, Bandung Barat, Jawa Barat dengan ketinggian 1.200 m dpl. Percobaan menggunakan rancangan petak terpisah (split plot design) dengan rancangan acak kelompok lengkap dan tiga ulangan. Sebagai petak utama adalah frekuensi fertigasi sebanyak 3, 5, dan 7 kali. Sebagai anak petak adalah volume fertigasi (ml) setiap aplikasi, yaitu 100, 200, 300, dan 400. Hasil penelitian menunjukkan tidak terjadi interaksi antara perlakuan frekuensi dan volume fertigasi terhadap semua peubah pengamatan. Frekuensi fertigasi terbaik terhadap bobot ubi per tanaman umur 100 HST adalah lima kali, yaitu jam 7, 10, 12, 14, dan 16. Volume fertigasi terbaik terhadap jumlah ubi ukuran besar umur 100 HST adalah 300 ml per aplikasi per polibag. Volume dan frekuensi fertigasi terbaik ini diharapkan tidak saja meningkatkan produksi benih, tetapi juga keuntungan usahatani yang diperoleh. Perlu dilakukan penelitian lebih lanjut untuk menginduksi pengumbian dengan mengalihkan ukuran ubi menjadi peningkatan jumlah ubi sebagai tujuan produksi benih G0.</p><p><strong>Keywords</strong></p><p><em>Solanum</em> tuberosum L.; Irigasi tetes; Fertigasi; Frekuensi; Volume</p><p><strong>Abstract</strong></p><p>Potato is one of vegetables that can be used as an alternative to support food diversification programs. But the potato production domestically is still low because of low quality seed. One of the potato seed technologies that can be developed is arragement of fertigation volumes and frequencies on drip fertigation. The objective of this research was to determine the best fertigation volume and frequency in G0 potato seed production in drip irrigation. This research was conducted from May to September 2016 at Screen House Cikahuripan Village, Lembang, Bandung on 1,200 m asl. The treatments were arranged in split plot design with randomized complete block design and three replications. The main plot was fertigation frequency which was consisted of three levels; 3, 5, and 7 times per day. The subplot was fertigation volume which was consisted of four levels; 100, 200, 300, and 400 ml per aplication. The result showed there was no interaction between fertigation frequency and volume on all observation. The best fertigation frequency on tuber weight per plant at 100 day after planting was five  times, i.e. 7, 10, 12, 14, and 16 o’clock. The best fertigation volume on number of big tuber at 100 day after planting was 300 ml per application. The best fertigation volume and frequency will increase not only seed production, but also profit of bussiness. Next research will be done to induction tuberization by transfering measurement of tuber to increase the amount of tuber as goal of production of G0 potato seed.</p><p> </p>

scholarly journals Pengaruh Pemupukan N dan Frekuensi Pemangkasan Tajuk pada Aspek Agronomis dan Hasil Tanaman Ubi Jalar (Ipomoea batatas (L.) Lam.) var. Kretek

Jurnal Agro ◽  
10.15575/856 ◽  
2016 ◽  
Vol 3 (2) ◽  
pp. 8-20 ◽  
Author(s):  
Nur Edy Suminarti
Keyword(s):  
Leaf Area ◽  
Ipomoea Batatas ◽  
Growth Analysis ◽  
Average Difference ◽  
N Application ◽  
Leaf Area Duration ◽  
Main Plot ◽  
Four Levels ◽  
Experimental Treatments ◽  
Plot Design

Penelitian yang bertujuan untuk mendapatkan informasi tentang pemupukan N dan frekuensi pemangkasan tajuk yang tepat pada tanaman ubi jalar (Ipomoea batatas (L.) Lam.). penelitian dilakukan di Kebun Percobaan Universitas Brawijaya, di Desa Jatikerto, Malang. Rancangan perlakuan yang digunakan adalah Petak Terbagi, dosis pupuk N ditempatkan pada petak utama, terdiri dari 4 taraf : (1) tanpa dipupuk N, (2) dipupuk 67,5 kg N ha-1, (3) dipupuk 135 kg N ha-1 dan (4) dipupuk 202,5 kg N ha-1. Pemangkasan tajuk ditempatkan pada anak petak, terdiri dari 4 macam : (1) tanpa dipangkas, (2) dipangkas 1 kali, (3) dipangkas 2 kali dan (4) dipangkas 3 kali. Pengumpulan data dilakukan secara destruktif meliputi luas daun, masa luas daun, panjang umbi, diameter umbi, bobot umbi per tanaman dan indeks pembagian. Uji F taraf 5% digunakan untuk menguji pengaruh perlakuan, sedangkan perbedaan diantara perlakuan didasarkan pada nilai Duncan taraf 5%. Hasil penelitian menunjukkan terjadi interaksi nyata pada luas daun, masa luas daun dan bobot umbi per tanaman. Luas daun dan masa luas daun tertinggi umumnya didapatkan pada pemupukan N dosis 202,5 kg N ha-1 dengan tanpa maupun dengan pemangkasan tajuk 1 kali. Bobot umbi per tanaman tertinggi didapatkan pada tanaman yang diberi pupuk N dengan dosis 135 kg N ha-1 dan pemangkasan tajuk 1 kali.     A field reaserch that aimed to get the appropriate of N application and frequency of topping was conducted in the experimental field of Brawijaya University, located in Jatikerto village, Malang. The experimental treatments consist of  four  levels of N (0 ; 67.5 kg N ha-1, 135 kg N ha-1 and 202.5 kg N ha-1) and four levels frequency of topping (without topping, 1, 2, and 3 of topping). These treatments were arranged in a split plot design; N application in the main plot and frequency of  topping in the subplot with three replications. Data was collected destructively including component of growth, component of yield and plant growth analysis.  F test at 5% is used to determine the effect of treatments, while the average difference between treatments was referred to Duncan value at 5%. The result showed there were significantly interaction between N application and frequency of topping on component of growth and   weight of tuber per plant.   Combination of N application dosage 202.5 kg ha-1 and non or once topped had resulted the highest of leaf area and leaf area duration. While the highest of weight tuber per plant was obtained on  N dosage 135 kg ha-1 and topping one times.

scholarly journals Growth Response and Yield of Three Shallot Varieties on The Various Mixed of UREA + ZA in Ultisol Soil

2021 ◽  
Vol 7 (2) ◽  
pp. 47-51
Author(s):  
Lily Marlina ◽  
Joko Purnomo ◽  
Hilda Susanti
Keyword(s):  
Plant Height ◽  
Interaction Effect ◽  
Growth Response ◽  
Growth And Yield ◽  
Affected Plant ◽  
Split Plot ◽  
Main Plot ◽  
Number Of Leaves ◽  
Four Levels ◽  
Plot Design

This study aimed to: (1) identify the interaction effect between varieties and mixed doses of urea + ZA on the growth and yield of shallots in Ultisol soil; (2) to identify the effect of each shallot varieties and the dosage mixture of urea + ZA which produce the highest yield in Ultisol soils. The research was conducted from April to June 2019 in Tungkaran Village, Martapura, with a split plot design. The main plot was shallot varieties (V) with three levels, namely Biru Lancor (v1), Bima Brebes (v2), and Super Philip (v3). Subplots were a mixture of urea + ZA (P) with four levels, namely 0 kg urea + 600 kg ZA (p1), 100 kg urea + ZA 400 kg (p2), 200 kg urea + 200 kg ZA (p3), and 300 urea kg + ZA 0 kg (p4). Each experiment was repeated three times. Therefore, there were 36 experimental units. Observation parameters included plant height, number of leaves per clump, number of bulbs per clump, fresh bulbs' weight per clump, and yield of stored dry bulbs. The results showed that the Bima Brebes variety (v2) had a significant effect on plant height, number of leaves, number of bulbs per clump, the weight of fresh bulbs per clump, and yield of stored dry bulbs. The mixture of 200 kg urea + 200 g ZA (p3) significantly affected plant height, number of leaves, number of tubers per clump, the weight of fresh tubers per clump, and yield of stored dry tubers.

Sign in / Sign up

Export Citation Format

Share Document