scholarly journals Cross-linked coacervates of cashew gum and gelatin in the encapsulation of pequi oil

2019 ◽  
Vol 49 (12) ◽  
Author(s):  
Joana de Barros Alexandre ◽  
Tiago Linhares Cruz Tabosa Barroso ◽  
Marília de Albuquerque Oliveira ◽  
Francisco Rogênio da Silva Mendes ◽  
José Maria Correia da Costa ◽  
...  
Keyword(s):  
Tannic Acid ◽  
Cross Linking ◽  
Cashew Gum ◽  
Degradation Temperature ◽  
Compound Design ◽  
Ge Matrix ◽  
The Cross ◽  
Microparticle Formation ◽  
Oppositely Charged ◽  
Oil Particles

ABSTRACT: Pequi oil is rich in bioactive compounds which can be encapsulated to increase protection against extrinsic environmental factors. A delayed degradation of pequi oil may occur by using microencapsulation technology, in addition to masking unpleasant flavors and aromas. Complex coacervation is a technique based on the electrostatic interaction between two oppositely charged biopolymers which form a matrix complexed around an agent of interest. However, cross-linking the particles is often necessary in order to make them more rigid. The objective of this research was to produce and characterize pequi oil microparticles in a cashew gum (CG) and gelatin (GE) matrix cross-linked with tannic acid. Cross-linked pequi oil microparticles were produced by varying the concentrations of biopolymers (0.5% to 1.5%) and tannic acid (0.3% to 8.1%) using a rotational central compound design. Ratio of cashew gum, gelatin and oil was 2:1:1 (m/m/m);respectively, at pH 4.5. The cross-linking process was performed with tannic acid for 30 minutes at 40 °C. The optimized formulation by means of the rotational central compound design for microparticle formation was 0.65% biopolymers (CG and GE) and 6.9% tannic acid. Increasing the tannic acid percentage in the cross-linking of the pequi oil particles had a higher yield and encapsulation efficiency. Cross-linking provided an increase in the degradation temperature of material; and consequently, improved the thermal stability of the particles. The cross-linking process was advantageous in producing the microparticles.

INVESTIGATION OF DIFFERENT CROSS-LINKING METHODS OF EOC:PDMS THERMOPLASTIC ELASTOMERS FOR CABLE INSULATION APPLICATION WITH SPECIAL REFERENCE TO THERMAL, RHEOLOGICAL, CREEP, AND ELECTRICAL PROPERTIES

2017 ◽  
Vol 90 (4) ◽  
pp. 585-610 ◽  
Author(s):  
Padmanabhan Ramachandran ◽  
Joyeeta Dutta ◽  
Tuhin Chatterjee ◽  
Golok B. Nando ◽  
Kinsuk Naskar
Keyword(s):  
Tensile Strength ◽  
Thermal Studies ◽  
Volume Resistivity ◽  
Thermoplastic Elastomers ◽  
Cross Linking ◽  
Rubber Blends ◽  
Degradation Temperature ◽  
Monomer Content ◽  
Ethylene Octene Copolymer ◽  
The Cross

ABSTRACT This article demonstrates the influence of different cross-linking methods of the ethylene octene copolymer (EOC)–polydimethylsiloxane (PDMS) rubber blends. From rheology analysis, it is understood that the EOC with a high co-monomer content has better radiation cross-linkability as compared with the EOC with a low co-monomer content. Also, from the curing study using an oscillating die rheometer, it was found that as the octene content increases, the cross-linking efficiency of the peroxide to cross-link that particular EOC decreases. The tensile strength of the EOC2:PDMS blend with a high co-monomer content was drastically improved by 39% on irradiation with a dosage of 50 kGy, whereas for the EOC:PDMS blend with a low co-monomer content, the tensile strength was drastically improved by 60% on peroxide cross-linking. It is inferred that both the peroxide and radiation cross-linked blends show higher creep resistance compared with the neat blends. From the thermal studies, it was found that through blending and subsequent radiation cross-linking, the maximum degradation temperature of the high-octene-content EOC was increased from 480.5 °C to 509.1 °C. The cross-linked blends show higher-volume resistivity as compared with the un-cross-linked counterparts.

A New Approach to the Demonstration of Oxidase-Localization Using Tannic Acid Or Catechin

1973 ◽  
Vol 31 ◽  
pp. 698-699
Author(s):  
V. Mizuhira ◽  
Y. Futaesaku
Keyword(s):  
Cross Section ◽  
Tannic Acid ◽  
Elastic Fiber ◽  
The Other ◽  
New Approach ◽  
Tissue Block ◽  
Active Reaction ◽  
The Cross

Previously we reported that tannic acid is a very effective fixative for proteins including polypeptides. Especially, in the cross section of microtubules, thirteen submits in A-tubule and eleven in B-tubule could be observed very clearly. An elastic fiber could be demonstrated very clearly, as an electron opaque, homogeneous fiber. However, tannic acid did not penetrate into the deep portion of the tissue-block. So we tried Catechin. This shows almost the same chemical natures as that of proteins, as tannic acid. Moreover, we thought that catechin should have two active-reaction sites, one is phenol,and the other is catechole. Catechole site should react with osmium, to make Os- black. Phenol-site should react with peroxidase existing perhydroxide.

scholarly journals Investigation of the functional network modifier loading on the stoichiometric ratio of epoxy resins and their dielectric properties

2021 ◽  
Author(s):  
Istebreq A. Saeedi ◽  
Sunny Chaudhary ◽  
Thomas Andritsch ◽  
Alun S. Vaughan
Keyword(s):  
Glass Transition ◽  
Dielectric Properties ◽  
Electrical Properties ◽  
Epoxy Resins ◽  
Functional Network ◽  
Cross Linking ◽  
Network Modifier ◽  
Epoxy Resin System ◽  
The Cross ◽  
The Impact

AbstractReactive molecular additives have often been employed to tailor the mechanical properties of epoxy resins. In addition, several studies have reported improved electrical properties in such systems, where the network architecture and included function groups have been modified through the use of so-called functional network modifier (FNM) molecules. The study reported here set out to investigate the effect of a glycidyl polyhedral oligomeric silsesquioxane (GPOSS) FNM on the cross-linking reactions, glass transition, breakdown strength and dielectric properties of an amine-cured epoxy resin system. Since many previous studies have considered POSS to act as an inorganic filler, a key aim was to consider the impact of GPOSS addition on the stoichiometry of curing. Fourier transform infrared spectroscopy revealed significant changes in the cross-linking reactions that occur if appropriate stoichiometric compensation is not made for the additional epoxide groups present on the GPOSS. These changes, in concert with the direct effect of the GPOSS itself, influence the glass transition temperature, dielectric breakdown behaviour and dielectric response of the system. Specifically, the work shows that the inclusion of GPOSS can result in beneficial changes in electrical properties, but that these gains are easily lost if consequential changes in the matrix polymer are not appropriately counteracted. Nevertheless, if the system is appropriately optimized, materials with pronounced improvements in technologically important characteristics can be designed.

scholarly journals The Effect of Surfactant-Modified Montmorillonite on the Cross-Linking Efficiency of Polysiloxanes

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2623
Author(s):  
Monika Wójcik-Bania ◽  
Jakub Matusik
Keyword(s):  
Total Pore Volume ◽  
Cross Linking ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
The Cross ◽  
Chain Lengths ◽  
First Time ◽  
Substituent Influence ◽  
Benzyl Substituent

Polymer–clay mineral composites are an important class of materials with various applications in the industry. Despite interesting properties of polysiloxanes, such matrices were rarely used in combination with clay minerals. Thus, for the first time, a systematic study was designed to investigate the cross-linking efficiency of polysiloxane networks in the presence of 2 wt % of organo-montmorillonite. Montmorillonite (Mt) was intercalated with six quaternary ammonium salts of the cation structure [(CH3)2R’NR]+, where R = C12, C14, C16, and R’ = methyl or benzyl substituent. The intercalation efficiency was examined by X-ray diffraction, CHN elemental analysis, and Fourier transform infrared (FTIR) spectroscopy. Textural studies have shown that the application of freezing in liquid nitrogen and freeze-drying after the intercalation increases the specific surface area and the total pore volume of organo-Mt. The polymer matrix was a poly(methylhydrosiloxane) cross-linked with two linear vinylsiloxanes of different siloxane chain lengths between end functional groups. X-ray diffraction and transmission electron microscopy studies have shown that the increase in d-spacing of organo-Mt and the benzyl substituent influence the degree of nanofillers’ exfoliation in the nanocomposites. The increase in the degree of organo-Mt exfoliation reduces the efficiency of hydrosilylation reaction monitored by FTIR. This was due to physical hindrance induced by exfoliated Mt particles.

Effects of a crosslinking agent on a supramolecular gel to control lost circulation

2021 ◽  
Vol 45 (16) ◽  
pp. 7089-7095
Author(s):  
Bo Wang ◽  
Jinsheng Sun ◽  
Kaihe Lv ◽  
Feng Shen ◽  
Yingrui Bai
Keyword(s):  
Crosslinking Agent ◽  
Network Density ◽  
Cross Linking ◽  
Supramolecular Gel ◽  
Lost Circulation ◽  
The Cross

The Cr3+ can improve the cross-linking degree and network density of the GP-A gel, and enhance its strength and plugging ability to control lost circulation.

scholarly journals Synthesis and Characterization of N-Substituted Polyether-Block-Amide Copolymers

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 773
Author(s):  
Jyun-Yan Ye ◽  
Kuo-Fu Peng ◽  
Yu-Ning Zhang ◽  
Szu-Yuan Huang ◽  
Mong Liang
Keyword(s):  
Titanium Isopropoxide ◽  
Decomposition Temperature ◽  
Phenyl Isocyanate ◽  
Cross Linking ◽  
Resonance Spectroscopy ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Degradation Temperature ◽  
Melt Polycondensation ◽  
Structural Regularity

A series of N-substituted polyether-block-amide (PEBA-X%) copolymers were prepared by melt polycondensation of nylon-6 prepolymer and polytetramethylene ether glycol at an elevated temperature using titanium isopropoxide as a catalyst. The structure, thermal properties, and crystallinity of PEBA-X% were investigated using nuclear magnetic resonance spectroscopy, Fourier-transform infrared spectroscopy, differential scanning calorimetry, wide angle X-ray diffraction, and thermogravimetric analysis. In general, the crystallinity, melting point, and thermal degradation temperature of PEBA-X% decreased as the incorporation of N-methyl functionalized groups increased, owing to the disruption caused to the structural regularity of the copolymer. However, in N-acetyl functionalized analogues, the crystallinity first dropped and then increased because of a new γ form arrangement that developed in the microstructure. After the cross-linking reaction of the N-methyl-substituted derivative, which has electron-donating characteristics, with poly(4,4′-methylenebis(phenyl isocyanate), the decomposition temperature of the resulting polymer significantly increased, whereas no such improvements could be observed in the case of the electro-withdrawing N-acetyl-substituted derivative, because of the incompleteness of its cross-linking reaction.

Sign in / Sign up

Export Citation Format

Share Document