scholarly journals Mechanical comparative analysis of three different types of sutures in different dimensions tendons: experimental study

2002 ◽  
Vol 10 (3) ◽  
pp. 35-41 ◽  
Author(s):  
Trajano Sardenberg ◽  
Sérgio Swain Müller ◽  
Chafi Facuri Neto ◽  
Gustavo Colani Barbosa ◽  
José Fernando El Murr ◽  
...  
Keyword(s):  
Experimental Study ◽  
Experimental Investigation ◽  
Comparative Analysis ◽  
Statistical Study ◽  
Ultimate Load ◽  
Left Limb ◽  
Different Types ◽  
Axial Traction ◽  
Different Dimensions ◽  
The Right

The aim of this experimental investigation was study of mechanical profile of three kinds of suture, between tendons with different dimensions. Were utilized 21 mongrel dogs ( 11males, 10 females) of wich were obtained the tendon comum flexor and tendon tibial cranial of both pelvic limbs. After the dissection of the tendons, suture was done, seven animal per group. The tendons utilized allways were from the right limb and from the left limb side utilized as control. After the suture, we performed axial traction tests, rate level of 30mm /min, using special jaws. After the test the machine's program informed the values of ultimate load, elongation and strain, and load elongation diagram. The results were submite to statistical study, that showed no difference between the technics utilized. The values of suture groups were smaller than the control, for ultimate load, and higher for elongation and strain.

scholarly journals Mechanical comparative analysis of three different types of sutures in different dimensions tendons - experimental study

2002 ◽  
Vol 10 (3) ◽  
pp. 42-51
Author(s):  
Raimundo Nonato R. Medeiros ◽  
José Wilson Rodriguez ◽  
Roberto Basile Jr. ◽  
Clelgen Luis Bonetti ◽  
Carlos Alberto dos Santos ◽  
...  
Keyword(s):  
Experimental Study ◽  
Comparative Analysis ◽  
Iliac Bone Graft ◽  
Congenital Kyphosis ◽  
Different Types ◽  
Spinal Arthrodesis ◽  
Different Dimensions ◽  
The Mean ◽  
Mean Time

The authors present sixteen patients with congenital kyphosis treated by posterior spinal arthrodesis. A homologous or autogenous iliac bone graft was used. The patients walked with Risser-Cotrel body cast in the 6 months of postoperatory period. The mean time of follow-up was 58,25 months and the mean age of the patients at time of surgery was 9,3 years. The mean angular value of the congenital kyphosis before surgery was 50,44º Cobb and after ther surgery it was 46,94º Cobb. One of the patients who had curve of 69º Cobb, presented pseudoarthrosis. The final results were good in 10, regular in 4 and bad in 2 patients. The need of the diagnostic and precocious treatment is recommended by authors.

Experimental investigation into transonic flows over tandem cavities

2001 ◽  
Vol 105 (1045) ◽  
pp. 119-124 ◽  
Author(s):  
N. Taborda ◽  
D. Bray ◽  
K. Knowles
Keyword(s):  
Experimental Study ◽  
Experimental Investigation ◽  
Mach Number ◽  
Pressure Distribution ◽  
Static Pressure ◽  
Transonic Flows ◽  
Wide Range ◽  
Different Dimensions

AbstractAn experimental study was conducted to analyse the pressure distribution along the floor of a cavity, with and without the presence of an upstream tandem cavity, at a constant freestream Mach number of about 0-911. Measurements were made for single cavities and the results compared with those obtained in the presence of an upstream tandem cavity. This comparison was made over a wide range of geometries, covering open to closed classes of cavities with both identical and different dimensions for the two cavities. The effect of the spacing between the two cavities was also studied. The downstream cavity is shown to be significantly affected by the presence of an upstream cavity, with both the overall net static pressure and its gradient being affected, dependent upon the class of cavity geometry and spacing under consideration.

scholarly journals The Upper end of Tibia of Nepalese adults: A Morphometric study

2020 ◽  
Vol 10 (2) ◽  
pp. 78-81
Author(s):  
Rajeev Mukhia ◽  
Dil Islam Mansur ◽  
Krishna Wahekar
Keyword(s):  
Weight Bearing ◽  
Morphometric Study ◽  
Lateral Condyle ◽  
Morphometric Measurements ◽  
Medial Condyle ◽  
Orthopaedic Surgeons ◽  
Left Limb ◽  
Ethical Approval ◽  
Different Dimensions ◽  
The Right

Introduction: The tibia bone forms the main skeleton of the leg. It plays an important role in weight bearing and takes part in the formation of knee joint. The knowledge of different dimensions of upper end of tibia will help the orthopaedic surgeons for diagnosis, planning and treatment of disease related to knee. Inappropriate design of knee replacement could affect the outcome of surgery with reported complications. The objective of the study is to find out the morphometric measurements of upper end of tibia in Nepalese Population. Methods: After ethical approval (MEMG/IRC/211/GA) the study was done on 60 dry tibia bones of Nepalese citizens irrespective of sex and race in the Department of Anatomy, Manipal College of Medical Sciences, Pokhara. The morphometric measurements of medial condyle, lateral condyle, intercondylar area and circumference of upper end of tibia of both sides were measured manually by thread, scale and Vernier calliper. Data were reported as mean ± SD and analyzed with MS Excel 2007 software. Results: Average anteroposterior measurements were found to be 46.38 mm and 39.14 mm and average transverse measurements were 28.79 mm and 27.86 mm respectively for medial and lateral condyles of both sides. The anteroposterior and transverse measurements of intercondylar area of tibia were 47.75 mm and 7.11 mm on the right side and 49.81 mm and 7.25 mm respectively on the left side (p<0.05). Similarly mediolateral length and circumference of upper end of tibia of left limb were significantly greater than the right limb (p<0.05).  Conclusion: The knowledge of different dimensions of upper end of tibia may be important in anthropological practice. Morp hometric parameters of upper end of tibia will be important to orthopaedic surgeons for diagnosis, planning and treatment of disease related to knee in Nepalese population.

Analytical Study of Violence Theme in Victoria Schwab’s This Savage Song

2019 ◽  
Keyword(s):  
Analytical Study ◽  
Research Paper ◽  
The Novel ◽  
Vicious Cycle ◽  
Aggressive Approach ◽  
Research Article ◽  
The People ◽  
The Social ◽  
Different Dimensions ◽  
The Right

This research article focuses on the theme of violence and its representation by the characters of the novel “This Savage Song” by Victoria Schwab. How violence is transmitted through genes to next generations and to what extent socio- psycho factors are involved in it, has also been discussed. Similarly, in what manner violent events and deeds by the parents affect the psychology of children and how it inculcates aggressive behaviour in their minds has been studied. What role is played by the parents in grooming the personality of children and ultimately their decisions to choose the right or wrong way has been argued. In the light of the theory of Judith Harris, this research paper highlights all the phenomena involved: How the social hierarchy controls the behaviour. In addition, the aggressive approach of the people in their lives has been analyzed in the light of the study of second theorist Thomas W Blume. As the novel is a unique representation of supernatural characters, the monsters, which are the products of some cruel deeds, this research paper brings out different dimensions of human sufferings with respect to these supernatural beings. Moreover, the researcher also discusses that, in what manner the curse of violence creates an inevitable vicious cycle of cruel monsters that makes the life of the characters turbulent and miserable.

The right to life: A comparative analysis of the relevant norms of the Constitutions of the Republic of Azerbaijan and Russian Federation

2020 ◽  
Vol 10 (1) ◽  
pp. 28-32
Keyword(s):  
Comparative Analysis ◽  
Death Penalty ◽  
Russian Federation ◽  
Practical Implementation ◽  
Right To Life ◽  
Human Right ◽  
The Russian Federation ◽  
The Republic ◽  
The Right ◽  
Criminal Legislation

The relevance of the work is determined by the fact that the right to life belongs to the basic constitutional human rights, therefore, its observance and protection is the duty of the state. Despite its undeniable importance, today the right to life anywhere in the world is not really ensured in sufficient quantities. The constitutional consolidation of the right to life raises a number of issues related to the concept, nature, legislative and practical implementation of this right. It should be noted that various aspects of the human right to life were considered in the scientific works of G.B. Romanovsky, O.G. Selikhova, T.M. Fomichenko, A.B. Borisova, V.A. Ershov and other Russian authors. The aim of the study is to study and comparative analysis of the legal content of the constitutional norm that defines the right to life, to comprehend and identify possible problems of the implementation of this right. To achieve this goal, this article discusses relevant issues of ensuring the right to life, proclaimed by Article 20 of the Constitution of the Russian Federation and Article 27 of the Constitution of Azerbaijan Republic. The results of a comparative analysis of these constitutional norms and the relevant norms of industry law allow us to determine, that there is no contradiction between Article 20 of the Constitution of the Russian Federation and the norms of the criminal legislation of the Russian Federation, which imply the death penalty as an exceptional measure of punishment, because a moratorium has been imposed on the death penalty in the Russian Federation since April 16, 1997. However, after the abolition of the death penalty in the criminal legislation of the Republic of Azerbaijan in 1998, there was a discrepancy between parts II and III of Article 27 of the Constitution of the Republic of Azerbaijan and the criminal legislation of Azerbaijan Republic that requires the introduction of the necessary changes in the content of the analyzed constitutional norm. The value of the work is determined by the fact that the introduction of appropriate changes will contribute to the further improvement of the Constitution of the Republic of Azerbaijan and the effective implementation of the right to life of everyone.

The influence of information relevance on the continued influence effect of misinformation

2020 ◽  
Author(s):  
Hua Jin ◽  
Lina Jia ◽  
Xiaojuan Yin ◽  
Shilin Wei ◽  
Guiping Xu
Keyword(s):  
Experimental Study ◽  
Questionnaire Survey ◽  
Personal Involvement ◽  
Influence Effect ◽  
Information Relevance ◽  
Different Types ◽  
Role Of Information

Misinformation often continues to influence people’s cognition even after corrected (the ‘continued influence effect of misinformation’, the CIEM). This study investigated the role of information relevance in the CIEM by questionnaire survey and experimental study. The results showed that information with higher relevance to the individuals had a larger CIEM, indicating a role of information relevance in the CIEM. Personal involvement might explain the effects of information relevance on the CIEM. This study provides insightful clues for reducing the CIEM in different types of misinformation and misinformation with varying relevance.

Comparative Analysis of Machine Learning Techniques Using Predictive Modeling

2020 ◽  
Vol 13 ◽  
Author(s):  
Ritu Khandelwal ◽  
Hemlata Goyal ◽  
Rajveer Singh Shekhawat
Keyword(s):  
Machine Learning ◽  
Comparative Analysis ◽  
Data Science ◽  
Training Data ◽  
Machine Learning Techniques ◽  
Future Trends ◽  
Data Set ◽  
Learning Stage ◽  
Learning Techniques ◽  
Different Types

Introduction: Machine learning is an intelligent technology that works as a bridge between businesses and data science. With the involvement of data science, the business goal focuses on findings to get valuable insights on available data. The large part of Indian Cinema is Bollywood which is a multi-million dollar industry. This paper attempts to predict whether the upcoming Bollywood Movie would be Blockbuster, Superhit, Hit, Average or Flop. For this Machine Learning techniques (classification and prediction) will be applied. To make classifier or prediction model first step is the learning stage in which we need to give the training data set to train the model by applying some technique or algorithm and after that different rules are generated which helps to make a model and predict future trends in different types of organizations. Methods: All the techniques related to classification and Prediction such as Support Vector Machine(SVM), Random Forest, Decision Tree, Naïve Bayes, Logistic Regression, Adaboost, and KNN will be applied and try to find out efficient and effective results. All these functionalities can be applied with GUI Based workflows available with various categories such as data, Visualize, Model, and Evaluate. Result: To make classifier or prediction model first step is learning stage in which we need to give the training data set to train the model by applying some technique or algorithm and after that different rules are generated which helps to make a model and predict future trends in different types of organizations Conclusion: This paper focuses on Comparative Analysis that would be performed based on different parameters such as Accuracy, Confusion Matrix to identify the best possible model for predicting the movie Success. By using Advertisement Propaganda, they can plan for the best time to release the movie according to the predicted success rate to gain higher benefits. Discussion: Data Mining is the process of discovering different patterns from large data sets and from that various relationships are also discovered to solve various problems that come in business and helps to predict the forthcoming trends. This Prediction can help Production Houses for Advertisement Propaganda and also they can plan their costs and by assuring these factors they can make the movie more profitable.

Sign in / Sign up

Export Citation Format

Share Document