scholarly journals In vitro evaluation of root canal preparation using oscillatory and rotary systems in flattened root canals

2007 ◽  
Vol 15 (1) ◽  
pp. 65-69 ◽  
Author(s):  
Luis Cardoso Rasquin ◽  
Fabíola Bastos de Carvalho ◽  
Regina Karla de Pontes Lima
Keyword(s):  
Root Canal ◽  
Root Canal Preparation ◽  
In Vitro Evaluation ◽  
Root Canals

Force and vibration analysis in biomechanical preparation of root canals using reciprocating endodontic file system: In vitro study

2021 ◽  
pp. 095441192110442
Author(s):  
Vinod Singh Thakur ◽  
Pavan Kumar Kankar ◽  
Anand Parey ◽  
Arpit Jain ◽  
Prashant Kumar Jain
Keyword(s):  
Root Canal ◽  
Vibration Analysis ◽  
File System ◽  
In Vitro Study ◽  
Root Canal Preparation ◽  
Root Canals ◽  
Improper Use ◽  
Four Levels ◽  
Root Canal Instrumentation

The shaping and cleaning of the root canal are very important in root canal treatment. The excessive force and vibration during biomechanical preparation of the root canal may result in failure of the endodontic file. In this study, force and vibration analysis was carried out during root canal preparation. The samples of human extracted (premolar) teeth were provided by the College of Dental Science and Hospital. Endodontic instruments for reciprocating motion, such as the WaveOne Gold file system, had been used for root canal preparation. Force and vibration signals were recorded by dynamometer and accelerometer, respectively. The acquired signals were denoised using the db4 (SWT denoising 1-D) wavelet. Four levels of decomposition were carried out for each signal. The signal denoising technique was used to remove unwanted noise from the acquired signal. FESEM analysis was used to visualize the levels of severity of endodontic files during the cleaning and shaping of the root canal. In most of the cases, the failure occurred due to the improper use of the root canal instrumentation. The optimum amount of force was used to avoid the file failure and provided the proper instrumentation. The curve fitting regression model was used to find the interdependency between force and vibration.

scholarly journals Apical Debris Extrusion during Root Canal Preparation with ProTaper Next and Mani Silk Rotary Systems: An in vitro Study

2016 ◽  
Vol 1 (2) ◽  
pp. 66-69
Author(s):  
Madhusudhana Koppolu ◽  
Chinni Suneelkumar ◽  
Anumula Lavanya ◽  
Ram Basam
Keyword(s):  
Social Sciences ◽  
Root Canal ◽  
In Vitro Study ◽  
Root Canal Preparation ◽  
Initial Weight ◽  
Root Canals ◽  
The Social ◽  
Significant Difference ◽  
Final Weight

ABSTRACT Aim To evaluate the amount of apically extruded debris after the preparation of root canals in extracted human single-rooted teeth using ProTaper Next and Mani Silk rotary systems. Materials and methods A total of 40 freshly extracted human single-rooted teeth with mature apices and straight root canal were selected and similar length were instrumented with ProTaper Next and Mani Silk rotary systems. Debris and irrigant extruded during instrumentation were collected into preweighed Eppendorf tubes. The Eppendorf tubes were then stored in an incubator at 68°C for 5 days. The weight of the extruded debris was determined by subtracting the initial weight from the final weight. Statistical analysis Data analysis was carried out using the Statistical Package for the Social Sciences (SPSS) version 20. Postweights were compared with an independent t test for 2 groups. Results Both instruments were associated with apical debris extrusion. There was no significant difference between the ProTaper Next and Mani Silk instruments in terms of mean weight of apically extruded debris. Conclusion There was no significant difference among the groups in terms of mean weight of apically extruded debris. How to cite this article Koppolu M, Basam R, Suneelkumar C, Lavanya A. Apical Debris Extrusion during Root Canal Preparation with ProTaper Next and Mani Silk Rotary Systems: An in vitro Study. J Oper Dent Endod 2016;1(2):66-69.

scholarly journals In vitro evaluation of root canal preparation with two rotary instrument systems – Pro Taper and Hero Shaper

2015 ◽  
Vol 88 (3) ◽  
pp. 395-402
Author(s):  
Carola Pentelescu ◽  
Loredana Colceriu ◽  
Ovidiu Pastrav ◽  
Carina Culic ◽  
Radu Chisnoiu
Keyword(s):  
Cross Sections ◽  
Root Canal ◽  
Working Time ◽  
Smear Layer ◽  
Root Canal Preparation ◽  
Root Canals ◽  
Maxillary Premolars ◽  
Oval Cross Section ◽  
The Difference

Background and aims. The purpose of this study was to compare several parameters of root canal preparation using two different rotary Nickel-Titanium instruments: Pro-Taper (Dentsply Maillefer, Ballagigues, Switzerland) and Hero-Shaper (Micro Mega, Besancon, France).Methods. Twelve extracted maxillary premolars were randomly divided into two groups and embedded into a muffle system. All root canals were prepared to size 25 using Pro-Taper or Hero-Shaper rotary instruments.  The following parameters were evaluated: root canal form, centering capacity of the instrument, the presence of residual dentinal debris and smear layer on the root canal walls, working time and the occurrence of intraoperative accidents. Statistical analysis was performed using the chi2 test (p=0.05).Results. The majority of the root canals prepared with Hero Shaper (88.89%) and ProTaper (77.78%) showed a round or oval cross-section postoperatively. Superposition of pre- and postoperative photographs of the cross-sections showed that for the coronal third of the root canals the Hero Shaper performed in a superior manner, while for the apical third better results were obtained with the Pro Taper system. Cleanliness of the root canal walls was investigated under the SEM, in the middle third of the canal, using a five-score system for debris and smear layer. For debris Hero Shaper and Pro Taper rotary systems achieved 66.67% and 50% scores of 1 or 2, respectively. The results for the smear layer were similar: cleaner root canal walls were found after preparation with Hero Shaper (66.67% scores 1, 2), followed by Pro Taper (50%). Mean working time was shorter for Hero Shaper (124s) than for Pro Taper (184s); the difference was not significant.Conclusions. Within the limits of this study, both systems had almost the same cleaning ability and excellent centering capacity.

scholarly journals Apically extruded debris associated with ProTaper Next, ProTaper Gold and TruNatomy systems: An in vitro study

2021 ◽  
Vol 15 (1) ◽  
pp. 30-34
Author(s):  
Neslihan Yılmaz Çırakoglu ◽  
Yağız Özbay
Keyword(s):  
Root Canal ◽  
In Vitro Study ◽  
The Other ◽  
Root Canal Preparation ◽  
Root Canals ◽  
System P ◽  
Apical Extrusion ◽  
Significant Difference ◽  
Final Weight

Background. This research aimed to investigate and compare the amount of apically extruded debris after root canal preparation using ProTaper Next, ProTaper Gold, and TruNatomy systems. Methods. Forty-five extracted mandibular premolar teeth with single canals with similar lengths were used. The root canals were prepared using ProTaper Next (Dentsply Maillefer, Ballaigues, Switzerland), ProTaper Gold (Dentsply Maillefer, Ballaigues, Switzerland), or TruNatomy (Dentsply Maillefer, Ballaigues, Switzerland) files. Apically extruded debris during preparation was gathered into preweighed Eppendorf tubes. Then the Eppendorf tubes were incubated at 70°C for five days. The Eppendorf tubes were weighed again to determine their final weight plus the extruded debris. Results. The TRN system resulted in significantly less debris extrusion than the PTN system (P<0.05). There was no significant difference between the PTN and PTG groups and between the PTG and TRN groups (P>0.05). Conclusion. All the instrumentation systems caused apical extrusion of debris. However, the TRN system resulted in significantly less debris extrusion than the other systems.

scholarly journals Cone-beam Computed Tomography Evaluation of Root Canal Preparation using Various Rotary Instruments: An in vitro Study

2015 ◽  
Vol 16 (11) ◽  
pp. 869-872 ◽  
Author(s):  
Suhashini Ramanathan ◽  
Pradeep Solete
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Cone Beam ◽  
Root Canal Preparation ◽  
Root Canals ◽  
Rotary Instruments ◽  
Significant Difference ◽  
Dentin Thickness

ABSTRACT Aim To evaluate the remaining dentin thickness of teeth after cleaning and shaping the root canal using three rotary instrumentation technique using cone-beam computed tomography (CBCT). Materials and methods This in vitro study is being done with 30 premolar samples with 20’ curvature. The study is divided into three groups a CBCT was taken to measure the shortest distance from the root canal outline to the closest adjacent root surface was measured at each level from the cementoenamel junction (CEJ) (1,3, 5 and 7 mm) before and after root canal instrumentation. The purpose of this study was to compare the effects of different instruments used to prepare curved root canals on the remaining cervical dentin thickness and total amount of dentin removed from root canals during instrumentation by using multi-slice CBCT. The remaining dentin thickness is very much necessary for the success rate of root canal treatment. However, this study helps to prove that a conservative preparation with a sound remaining dentin thickness is much more advisable. Result It was observed that there was a significant difference at 1 and 3 mm (p < 0.05) and at 5 and 7 mm there was no significant difference (p > 0.05). Mtwo has removed less amount dentin when compared to ProTaper Universal and ProTaper Next system at 1 and 3 mm. Conclusion Under the conditions of the study, we concluded that ProTaper Universal and ProTaper Next should be used judiciously, as it causes higher thinning of root dentin of the root when compared with Mtwo. How to cite this article Ramanathan S, Solete P. Cone-beam Computed Tomography Evaluation of Root Canal Preparation using Various Rotary Instruments: An in vitro Study. J Contemp Dent Pract 2015;16(11):869-872.

scholarly journals In vitro evaluation of the presence of apical deviation with employment of automated handpieces with continuous and alternate motion for root canal preparation

2004 ◽  
Vol 12 (3) ◽  
pp. 195-199 ◽  
Author(s):  
Orlando Limongi ◽  
Ângela Osdeberg Klymus ◽  
Flares Baratto Filho ◽  
José Roberto Vanni ◽  
Rosana Travassos
Keyword(s):  
Root Canal ◽  
Moderate Degree ◽  
Root Canal Preparation ◽  
Continuous Motion ◽  
In Vitro Evaluation ◽  
Motion System ◽  
Maxillary Molars ◽  
Two Systems

The present study conducted an in vitro evaluation of the presence of apical deviation on the root canal preparation of the mesiobuccal roots of human maxillary molars employing automated handpieces with continuous motion, the Pow R system (Moyco Union Broach), and alternate motion, the M4 system (Kerr). Analysis of the presence of apical deviation was carried out by means of radiographs obtained on a radiographic desk fabricated for the study. The results demonstrated the lack of statistically significant differences between the two systems as to the evaluation of the presence of apical deviation. There was no correlation between the degree of curvature of the roots and the degree of apical deviation for the continuous motion system. However, there was a statistic difference for the alternate motion system, with a direct correlation of moderate degree.

scholarly journals Root canal curvature as a prognostic factor influencing the diagnostic accuracy of radiographic working length determination and postoperative canal axis modification: an in vitro comparative study

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Bestoon Mohammed Faraj
Keyword(s):  
Root Canal ◽  
Radiographic Images ◽  
The Real ◽  
Root Canals ◽  
Length Estimation ◽  
Working Length ◽  
Length Determination ◽  
Case Difficulty Assessment ◽  
The Impact

Abstract Background Radiographic analysis of tooth morphology is mandatory for accurate calibration of the degree of canal curvature angle and radiographic working length to its real dimensions in case difficulty assessment protocols. This study aimed to determine the impact of the degree of root canal curvature angle on maintaining the real working length and the original canal axis of prepared root canals using a reciprocating rotary instrumentation technique. Methods Radiographic image analysis was performed on 60 extracted single-rooted human premolar teeth with a moderate canal curvature (10°–25°) and severe canal curvature (26°–70°). Working length and longitudinal canal axis were determined using cone-beam computed tomography (CBCT) and digital periapical radiography. The real canal length was determined by subtracting 0.5 mm from the actual canal length. Root canals were prepared using the WaveOne Gold reciprocating file (Dentsply Maillefer, Ballaigues, Switzerland). Results There was no significant relation of the degree of canal curvature angle to the accuracy of radiographic working length estimated on CBCT and digital periapical radiographic techniques (P > 0.05). Postinstrumentation changes in the original canal axis between moderate and severe canal curvature angles, assessed on CBCT and periapical digital radiographic images were statistically non-significant (P > 0.05). Conclusions A standardized digital periapical radiographic method performed similarly to the CBCT technique near to its true working length. No significant interaction exists between the diagnostic working length estimation, postoperative root canal axis modification, and the degree of canal curvature angle, using reciprocating rotary instrumentation technique.

scholarly journals Bacteriophages to Control Multi-Drug Resistant Enterococcus faecalis Infection of Dental Root Canals

2021 ◽  
Vol 9 (3) ◽  
pp. 517
Author(s):  
Mohamed El-Telbany ◽  
Gamal El-Didamony ◽  
Ahmed Askora ◽  
Eman Ariny ◽  
Dalia Abdallah ◽  
...  
Keyword(s):  
Enterococcus Faecalis ◽  
Root Canal ◽  
Phage Therapy ◽  
Ex Vivo ◽  
Burst Size ◽  
Resistant Bacteria ◽  
Drug Resistant ◽  
Range Analysis ◽  
Root Canals

Phage therapy is an alternative treatment to antibiotics that can overcome multi-drug resistant bacteria. In this study, we aimed to isolate and characterize lytic bacteriophages targeted against Enterococcus faecalis isolated from root canal infections obtained from clinics at the Faculty of Dentistry, Ismalia, Egypt. Bacteriophage, vB_ZEFP, was isolated from concentrated wastewater collected from hospital sewage. Morphological and genomic analysis revealed that the phage belongs to the Podoviridae family with a linear double-stranded DNA genome, consisting of 18,454, with a G + C content of 32.8%. Host range analysis revealed the phage could infect 10 of 13 E. faecalis isolates exhibiting a range of antibiotic resistances recovered from infected root canals with efficiency of plating values above 0.5. One-step growth curves of this phage showed that it has a burst size of 110 PFU per infected cell, with a latent period of 10 min. The lytic activity of this phage against E. faecalis biofilms showed that the phage was able to control the growth of E. faecalis in vitro. Phage vB_ZEFP could also prevent ex-vivo E. faecalis root canal infection. These results suggest that phage vB_ZEFP has potential for application in phage therapy and specifically in the prevention of infection after root canal treatment.

The in vitro evaluation of antibacterial efficacy optimized with cellular apoptosis on multi-functional polyurethane sealers for the root canal treatment

2021 ◽  
Vol 9 (5) ◽  
pp. 1370-1383
Author(s):  
Xiaoyu Lei ◽  
Jian Wang ◽  
Jie Chen ◽  
Jing Gao ◽  
Jinzheng Zhang ◽  
...  
Keyword(s):  
Root Canal ◽  
Evaluation System ◽  
Root Canal Treatment ◽  
Antibacterial Efficacy ◽  
Apoptotic Pathway ◽  
In Vitro Evaluation ◽  
Cellular Apoptosis ◽  
Genetic Assessment

Combined with a series of antibacterial tests and the genetic assessment of the apoptotic pathway, an evaluation system has been rationalized to govern the fate of the different compositions of PU-based sealers.

Sign in / Sign up

Export Citation Format

Share Document