Corn and Palmer amaranth (Amaranthus palmeri) Interactions with Nitrogen in Dryland and Irrigated Environments

Weed Science ◽  
2013 ◽  
Vol 61 (2) ◽  
pp. 249-258 ◽  
Author(s):  
Ella K. Ruf-Pachta ◽  
Dwain M. Rule ◽  
J. Anita Dille
Keyword(s):  
Soil Moisture ◽  
Crop Production ◽  
Field Experiments ◽  
Yield Loss ◽  
Palmer Amaranth ◽  
Parameter Estimates ◽  
Corn Yield ◽  
N Application ◽  
Nitrogen Concentrations ◽  
N Rates

Palmer amaranth influences selection of crop production practices such as irrigation, nitrogen (N) application, and weed control. The objectives of this research were to determine if Palmer amaranth was more responsive to applied N than corn and if this differed under dryland and irrigated conditions in Kansas. Field experiments were conducted near Manhattan, KS, in 2005 and 2006 to evaluate the influence of N rate and Palmer amaranth densities when grown with corn in two soil moisture environments. A very drought-stressed environment and a well-watered environment occurred in 2006, while both environments in 2005 were intermediate. Dryland weed-free corn yields were 46.5% of irrigated corn yields at the high N rate across years. Irrigated corn yields responded to increasing N rates. In the presence of Palmer amaranth, parameter estimates I and A for the yield loss relationship were not different across N rates for each environment and year except 2006 where 100% yield loss was estimated in dryland compared to 62.5% loss in irrigated environment at high N rates. In three of four environment-years, N rate did not affect the corn yield loss relationship with weed density. In 2006 irrigated environment, greater N rates had less corn yield loss caused by Palmer amaranth. By corn anthesis, weed-free corn biomass was 167.5% greater in irrigated than dryland environments in 2006. Palmer amaranth with no corn increased its biomass by 373 and 361% as N rate increased in 2005 and 2006, respectively. Nitrogen concentrations in plant tissues of corn or weed increased similarly as N rates increased from 0 to 224 kg N ha−1, thus highlighting that both corn and Palmer amaranth responded similarly to increasing N. In general, soil moisture environment was most critical when determining potential corn yield, followed by Palmer amaranth density and N rate.

Annual weed competitiveness as affected by preemergence herbicide in corn

Weed Science ◽  
2006 ◽  
Vol 54 (1) ◽  
pp. 156-165 ◽  
Author(s):  
Konanani B. Liphadzi ◽  
J. Anita Dille
Keyword(s):  
Seed Production ◽  
Crop Yield ◽  
Field Experiments ◽  
Yield Loss ◽  
Palmer Amaranth ◽  
Growth And Yield ◽  
Yield Response ◽  
Corn Yield ◽  
Herbicide Application ◽  
Crop Yield Loss

Competitiveness of weeds that survive a PRE herbicide application (escaped weeds) might be altered because of herbicide injury. As a result, potential crop yield loss may be reduced. Field experiments were conducted at Ashland Bottoms, KS, in 2001 and 2002 and at Rossville, KS, in 2002. The objectives were to quantify corn growth and yield response to Palmer amaranth or velvetleaf competition, with or without isoxaflutole (0.03 kg ha−1) or flumetsulam (0.04 kg ha−1) application, and to determine seed production of Palmer amaranth or velvetleaf as affected by PRE herbicide. Palmer amaranth and velvetleaf densities ranged from 0 to 6 and 0 to 32 plants m−1of corn row, respectively. At Ashland Bottoms in 2002, corn height at tasseling decreased with increasing Palmer amaranth (1.58 cm weed−1m−1) and velvetleaf (1.32 cm weed−1m−1) density when no herbicide was applied. With flumetsulam application, each increase in velvetleaf density reduced corn height by 0.4 cm. Escaped Palmer amaranth and velvetleaf were shorter than untreated plants at corn tasseling. At Rossville in 2002, Palmer amaranth that escaped isoxaflutole or flumetsulam application caused 13% corn yield loss (YL) at a density of 3 plants m−1. In contrast, corn YL from untreated Palmer amaranth at the same density was 30%. At Ashland Bottoms in 2002, velvetleaf that escaped flumetsulam caused 3% corn YL at a density of 3 plants m−1compared with 38% YL caused by untreated velvetleaf at the same density. Seed production of Palmer amaranth was independent of density or herbicide treatment, whereas production of velvetleaf seed increased with density, with or without flumetsulam. The study showed that corn YL from both Palmer amaranth and velvetleaf that escaped a PRE herbicide was less than from untreated weeds, but seed production by escaped weeds was similar to that of untreated weeds.

scholarly journals Effect of nitrogen addition on the comparative productivity of corn and velvetleaf (Abutilon theophrasti)

Weed Science ◽  
2006 ◽  
Vol 54 (02) ◽  
pp. 354-363 ◽  
Author(s):  
Darren C. Barker ◽  
Stevan Z. Knezevic ◽  
Alex R. Martin ◽  
Daniel T. Walters ◽  
John L. Lindquist
Keyword(s):  
Leaf Area ◽  
Field Experiments ◽  
Yield Loss ◽  
Biomass Accumulation ◽  
Nitrogen Addition ◽  
Corn Yield ◽  
N Addition ◽  
Area Index ◽  
Nitrogen Levels ◽  
Weed Growth

Weeds that respond more to nitrogen fertilizer than crops may be more competitive under high nitrogen (N) conditions. Therefore, understanding the effects of nitrogen on crop and weed growth and competition is critical. Field experiments were conducted at two locations in 1999 and 2000 to determine the influence of varying levels of N addition on corn and velvetleaf height, leaf area, biomass accumulation, and yield. Nitrogen addition increased corn and velvetleaf height by a maximum of 15 and 68%, respectively. N addition increased corn and velvetleaf maximum leaf area index (LAI) by up to 51 and 90%. Corn and velvetleaf maximum biomass increased by up to 68 and 89% with N addition. Competition from corn had the greatest effect on velvetleaf growth, reducing its biomass by up to 90% compared with monoculture velvetleaf. Corn response to N addition was less than that of velvetleaf, indicating that velvetleaf may be most competitive at high levels of nitrogen and least competitive when nitrogen levels are low. Corn yield declined with increasing velvetleaf interference at all levels of N addition. However, corn yield loss due to velvetleaf interference was similar across N treatments except in one site–year, where yield loss increased with increasing N addition. Corn yield loss due to velvetleaf interference may increase with increasing N supply when velvetleaf emergence and early season growth are similar to that of corn.

scholarly journals Residue and Agronomic Management to Reduce the Continuous Corn Yield Penalty

Agronomy ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 567
Author(s):  
Vogel ◽  
Below
Keyword(s):  
Management System ◽  
Crop Production ◽  
Field Experiments ◽  
High Volume ◽  
Residue Management ◽  
Yield Potential ◽  
Corn Yield ◽  
Continuous Corn ◽  
Standard Management ◽  
Yield Penalty

Accelerated residue degradation and nutrient cycling will be necessary to maximize yield potential in corn (Zea mays L.) grown continuously and in other high-volume residue situations. This study aimed to test if residue management and agronomic inputs could lessen the continuous corn yield penalty (CCYP) compared to a corn following soybean [Glycine max (L.) Merr.] rotation. Field experiments conducted during 2017 and 2018 at Champaign, IL, USA compared plots of 15th year continuous corn to long-term corn-soybean rotation plots. The previous year’s corn crop residue was either downsized (chopped) or harvested with standard knife rollers, with further chemical management of either a biocatalyst or ammonium sulfate, or it was left untreated. A standard management system of 79,000 plants ha−1 and a base rate of nitrogen fertilizer was compared to an intensive management system of 111,000 plants ha−1 with additional fertilizer and a foliar fungicide. Although continuous corn cropping stress was not detected until R2 (kernel blister stage), the CCYP was 1.30 Mg ha−1. Sizing residue enhanced overwinter residue decomposition and increased yield by 0.31 Mg ha−1 regardless of rotation and by 0.53 Mg ha−1 in continuous corn. Intensive inputs in combination with residue sizing increased grain yield of continuous corn by 1.15 Mg ha−1 over standard-management rotated yields. Therefore, combining mechanical and agronomic managements can reduce corn residue and the CCYP for more sustainable crop production.

Effects of hybrid susceptibility and inoculation timing on Goss’s bacterial wilt and leaf blight severity and corn yield

Plant Disease ◽  
2021 ◽  
Author(s):  
Elizabeth C Bauske ◽  
Andrew J Friskop
Keyword(s):  
Disease Severity ◽  
Bacterial Wilt ◽  
Field Experiments ◽  
Yield Loss ◽  
Leaf Blight ◽  
Corn Yield ◽  
Yield Losses ◽  
Sequential Combination ◽  
High Level ◽  
Growing Region

Goss’s bacterial wilt and leaf blight (Goss’s wilt) of corn is the most important corn disease in North Dakota (ND), and yield loss due to the disease has not been reliably quantified in northern corn growing regions. To help quantify the amount of yield loss caused by Goss’s wilt, a total of six field experiments were conducted from 2015 to 2017. Experiments were designed in a randomized complete block with a split plot arrangement. Hybrids served as main plots and Clavibacter nebraskensis (Cn) inoculation timings as sub-plots. Three hybrids were used and classified as a susceptible, moderately susceptible, and resistant. Inoculation timings included a non-inoculated control, six to ten leaf collars (V6 to V10), reproductive silk stage (R1), or a sequential combination of V6 to V10 and R1. A high level of disease (greater than 50% on susceptible hybrid) occurred in three experiments, a low level of disease (less than 5% on susceptible hybrid) in one experiment, and no disease was reported in two experiments. A combined analysis of the high disease experiments indicated yield losses of 34 to 41% on the susceptible hybrid when Cn inoculation occurred at V6 to V10. Yield losses of 22 to 25% occurred on the moderately susceptible hybrid when C. nebraskensis inoculation occurred at V6 to V10, and statistical differences in yield loss were not found among inoculations timings on the resistant hybrid. Correlation analyses suggest that for every 1% increase in R1 disease severity on the susceptible hybrid, yield was reduced by 117 kg/ha (1.9 bu/A). The current study further demonstrates the importance of hybrid resistance and provides updated yield loss information on Goss’s wilt in a northern corn growing region.

Weed Management in Corn with Postemergence Applications of Tembotrione or Thiencarbazone : Tembotrione

2015 ◽  
Vol 29 (3) ◽  
pp. 350-358 ◽  
Author(s):  
Daniel O. Stephenson ◽  
Jason A. Bond ◽  
Randall L. Landry ◽  
H. Matthew Edwards
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Growth Stage ◽  
Field Experiments ◽  
Palmer Amaranth ◽  
Corn Yield ◽  
Herbicide Treatments

Four field experiments were conducted in Louisiana and Mississippi in 2009 and 2010 to evaluate POST herbicides treatments with tembotrione applied alone or as a prepackaged mixture with thiencarbazone for weed control in corn. Treatments included tembotrione at 92 g ai ha−1, thiencarbazone : tembotrione at 15 : 76 g ai ha−1, atrazine at 2,240 g ai ha−1, glufosinate at 450 g ai ha−1, glyphosate at 860 g ae ha−1, and coapplications of tembotrione or thiencarbazone : tembotrione with atrazine, glufosinate, or glyphosate. All treatments were applied to 26-cm corn in the V4 growth stage. Treatments containing thiencarbazone : tembotrione and those with tembotrione controlled barnyardgrass, browntop millet, entireleaf morningglory, hophornbeam copperleaf, johnsongrass, Palmer amaranth, and velvetleaf 85 to 96% and 43 to 97% 28 d after treatment and at corn harvest, respectively. Corn yield ranged from 9,200 to 10,420 kg ha−1and was greater than the nontreated control following all herbicide treatments, except atrazine alone. Results indicated that thiencarbazone : tembotrione or tembotrione POST is an option for weed management in corn, and applications of thiencarbazone : tembotrione would be strongly encouraged where rhizomatous johnsongrass is problematic.

scholarly journals Evaluation of Silage Corn Yield Gap: An Approach for Sustainable Production in the Semi-Arid Region of USA

2018 ◽  
Vol 10 (7) ◽  
pp. 2523 ◽  
Author(s):  
Abdelaziz Nilahyane ◽  
M. Islam ◽  
Abdel O. Mesbah ◽  
Axel Garcia y Garcia
Keyword(s):  
Irrigation Water ◽  
Field Experiments ◽  
Block Design ◽  
Field Research ◽  
Growth And Yield ◽  
Corn Yield ◽  
Yield Gap ◽  
Main Plot ◽  
Semi Arid Region ◽  
N Rates

Water and nitrogen (N) play an important role in closing the yield gap of crops by reducing associated stresses and yield variability. Field research data coupled to the CSM-CERES-Maize model of Decision Support System Agrotechnology Transfer were used to advance our understanding of the effect of water and N on silage corn growth and yield. The objectives of the study were to determine: (i) the best combination of irrigation water and N for optimum biomass yield, and (ii) the yield gap of silage corn grown at different locations in Wyoming, USA. Field experiments were conducted under sub-surface drip irrigation using a randomized complete block design in a split-plot arrangement with four replications. The main plot was irrigation and consisted of 100% crop evapotranspiration (100ETc), 80% (80ETc), and 60% (60ETc), and the sub-plot was N rates, including 0, 90, 180, 270, and 360 kg N ha−1 as urea-ammonium-nitrate. The simulated results indicated full irrigation and at least 150 kg N ha−1 as the best combination for silage corn production in Wyoming. Our observed and simulated results show the potential to increase the biomass and reduce the yield gap of silage corn in the region if irrigation water and N are properly managed.

Evaluating Effect of Degree of Water Stress on Growth and Fecundity of Palmer amaranth (Amaranthus palmeri) Using Soil Moisture Sensors

Weed Science ◽  
2018 ◽  
Vol 66 (6) ◽  
pp. 738-745 ◽  
Author(s):  
Parminder S. Chahal ◽  
Suat Irmak ◽  
Mithila Jugulam ◽  
Amit J. Jhala
Keyword(s):  
Soil Moisture ◽  
Water Stress ◽  
Seed Germination ◽  
Crop Production ◽  
Growth Index ◽  
The United States ◽  
Palmer Amaranth ◽  
Maximum Height ◽  
Amaranthus Palmeri ◽  
Soil Moisture Sensors

AbstractPalmer amaranth (Amaranthus palmeriS. Watson) is the most problematic weed in agronomic crop production fields in the United States. The objective of this study was to determine the effect of degree of water stress on the growth and fecundity ofA. palmeriusing soil moisture sensors under greenhouse conditions. TwoA. palmeribiotypes collected from Nebraska were grown in loam soil maintained at 100%, 75%, 50%, 25%, and 12.5% soil field capacity (FC) corresponding to no, light, moderate, high, and severe water stress levels, respectively. Water was regularly added to pots based on soil moisture levels detected by Watermark or Decagon 5TM sensors to maintain the desired water stress level.Amaranthus palmeriplants maintained at ≤25% FC did not survive more than 35 d after transplanting.Amaranthus palmeriat 100%, 75%, and 50% FC produced similar numbers of leaves (588 to 670 plant−1) based on model estimates; however, plants at 100% FC achieved a maximum height of 178 cm compared with 124 and 88 cm at 75% and 50% FC, respectively. The growth index (1.1×105to 1.4×105cm3plant−1) and total leaf area (571 to 693 cm2plant−1) were also similar at 100%, 75%, and 50% FC.Amaranthus palmeriproduced similar root biomass (2.3 to 3 g plant−1) at 100%, 75%, and 50% FC compared with 0.6 to 0.7 g plant−1at 25% and 12.5% FC, respectively. Seed production was greatest (42,000 seeds plant−1) at 100% FC compared with 75% and 50% FC (14,000 to 19,000 seeds plant−1); however, the cumulative seed germination was similar (38% to 46%) when mother plants were exposed to ≥50% FC. The results of this study show thatA. palmerican survive ≥50% FC continuous water stress conditions and can produce a significant number of seeds with no effect of on seed germination.

Functional relationships between giant ragweed (Ambrosia trifida) interference and sweet corn yield and ear traits

Weed Science ◽  
2006 ◽  
Vol 54 (5) ◽  
pp. 948-953 ◽  
Author(s):  
Martin M. Williams ◽  
John B. Masiunas
Keyword(s):  
Field Experiments ◽  
Yield Loss ◽  
Sweet Corn ◽  
Initial Slope ◽  
Hyperbolic Model ◽  
Corn Yield ◽  
Fresh Market ◽  
Ambrosia Trifida ◽  
Functional Relationships ◽  
Giant Ragweed

Field experiments were conducted to quantify functional relationships between giant ragweed density and sweet corn yield and ear traits. A rectangular hyperbolic model was fit to yield loss measured in terms of marketable ear mass, appropriate for the processing industry, and boxes of 50 marketable ears, relevant to the fresh market industry. The initial slope of the hyperbolic yield loss function (I), which describes the linear portion of yield loss as weed density (weeds per square meter) approaches zero, was 119 for loss of ear mass and 97 for loss of boxes of ears. Furthermore, 10 of 12 ear traits including green ear mass, husked ear mass, ear length, filled ear length, ear width, number of kernels per row, number of rows, kernel depth, kernel mass, and kernel moisture content were significantly affected by giant ragweed interference.

Nitrogen management will influence threshold values of green foxtail (Setaria viridis) in corn

Weed Science ◽  
2003 ◽  
Vol 51 (6) ◽  
pp. 975-986 ◽  
Author(s):  
R. Jason Cathcart ◽  
Clarence J. Swanton
Keyword(s):  
Grain Yield ◽  
Field Experiments ◽  
Response Surfaces ◽  
Corn Yield ◽  
Threshold Values ◽  
Corn Production ◽  
Green Foxtail ◽  
N Rates ◽  
Corn Grain ◽  
Corn Grain Yield

Environmental legislation may impose limitations on the quantity of nitrogen (N) used in corn production on the basis of soil type and ground water flow. If N rates are reduced, this might influence the relative competitiveness of weed species. Therefore, the objectives of this research were to develop a surface response model to provide estimations of the effect of differing N rates on threshold values of green foxtail in corn and to use this model as a theoretical framework for hypothesis testing. Field experiments were conducted from 1999 to 2001 to examine the interaction of N rate and green foxtail density on corn grain yield. The experiment was designed as a two-factor factorial with N levels ranging from 0 to 200 kg N ha−1and targeted green foxtail densities ranging from 0 to 300 green foxtail plants m−2. The addition of up to 200 kg N ha−1increased corn grain yield in both weed-free and weedy treatments. Corn yield loss attributed to green foxtail ranged from 35 to 40% at 0 kg N ha−1to 12 to 17% at 200 kg N ha−1. Ridge analysis of the response surfaces indicated that optimal corn grain yield could be achieved at derived values of 131 to 138 kg N ha−1while maintaining a green foxtail density of 8 to 9 green foxtail plants m−2on a sandy soil with less than 2% organic matter. The analyses of simulation results led to the generation of hypotheses of practical relevance to N management. On the basis of the generated hypotheses, a legislated reduction in N or an increase in the cost of N fertilizer would result in a lower threshold value for green foxtail in corn. If legislation were to ban the use of all herbicides in corn production, higher N rates or an increase in mechanical weed control measures would be required to offset yield losses caused by green foxtail. The human health and environmental consequences of such legislation would be significant.

Utilisation de l'engrais azoté marqué au 15N par le maïs selon les modes d'application et les doses d'azote

1997 ◽  
Vol 77 (1) ◽  
pp. 9-19 ◽  
Author(s):  
Thi Sen Tran ◽  
Marcel Giroux ◽  
Michel P. Cescas
Keyword(s):  
Field Experiments ◽  
N Uptake ◽  
Field Trials ◽  
N Fertilization ◽  
N Fertilizer ◽  
N Recovery ◽  
Split Application ◽  
N Application ◽  
Application Methods ◽  
N Rates

The main objective of this study was to compare the recovery of 15N-labelled fertilizer by different methods of N application and N rates. Field experiments were carried out for 3 yr at Saint-Hyacinthe (Saint-Damase, Du Contour, Sainte-Rosalie soils) and at Saint-Lambert, Lévis (Le Bras soil). Grain corn (cv. Pride K228, 2700 CHU) and silage corn (cv. Hyland 3251, 2300 CHU) were grown at Saint-Hyacinthe and Saint-Lambert, respectively. In 1988 and 1989, field trials were arranged in a randomized complete bloc design consisting of five treatments in three replications: control 0 N and four split application methods of N fertilizer. Labelled 15NH4 15NO3 fertilizer was applied either banded at planting as starter (D), broadcast and incorporated before planting (Vs) or sidedressing between rows at V6 to V8 stages of corn (Bp). In 1990 field trials, treatments consisted of four N rates (0, 60, 120 and 180 kg N ha−1) labelled with 15NH4 15NO3. The effect of N rates on yield and N uptake by corn was significant in all years. However, the effect of application methods was significant only on the soil Du Contour in 1989 where corn grain yield was highest when N fertilizer was split as starter and sidedress band. The CUR of N fertilizer applied broadcast before planting (42 to 48%) was generally lower than sidedressing band application (43 to 54%). N fertilizer recovery in the starter showed also high CUR values (45 to 60%). Consequently, it is recommended to split N fertilizers and apply in band to increase efficiency for grain corn. The CUR values decreased with N rates only in Le Bras soil in 1990. Residual N fertilizer increased from 27 to 103 kg N ha−1 for 60 and 180 kg N ha−1 rates, respectively. Consequently, the environmental impact of N fertilization may increased with high N rate. Key words: Grain corn, silage corn, 15N recovery, fertilizer N split application

Sign in / Sign up

Export Citation Format

Share Document