scholarly journals Effect of Lesser Yam Flour Addition on Water Content, Texture, Crude Fiber Content, and Reducing Sugar Content of Donut Made from Wheat Flour

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Indri Iriana Putri ◽  
Bambang Dwiloka ◽  
Valentinus Priyo Bintoro

This research aimed to determine the addition of lesser yam flour on water content, texture, crude fiber content, and reducing sugar content of donut made from wheat flour. This research was arranged using completely randomized design with 5 treatments and 4 replications consisted of 5 different lesser yam flour concentrations (0–30%) from total flour that had been used. Water content, texture, and crude fiber content were analyzed using Analysis of Variance (ANOVA) at 5% significance level and reducing sugar content was analyzed using regression equation. The result showed the addition of lesser yam flour can reduce water content. However, it can increase texture, crude fiber content, and reducing sugar content. As conclusion, the concentration of lesser yam flour affected the water content, texture, crude fiber, and reducing sugar in donut.

2018 ◽  
Vol 7 (1) ◽  
pp. 12
Author(s):  
Utafiyani . ◽  
Ni Luh Ari Yusasrini ◽  
I Gusti Ayu Ekawati

This aims of this research was to know the effect of comparison between green bean flour and wheat flour on characteristic of analogue meatball and to know the right comparison of green bean flour and wheat flour to produce analogue meatball with the best characteristics. The design used in this research was completely randomized design (CRD) with the comparison between green bean flour and wheat flour i.e. (70 g :30 g), (60 g :40 g), (50 g :50 g), (40 g :60 g), and (30 g :70 g). Data were analysed by analysis of variance, followed by Duncan test. The result of this research showed that the comparison between green bean flours and wheat flour had no real effect on water content and aroma of analogue meatball, but significant effects were found on ash content, protein content, fat content, crude fiber content, texture, sensory characteristic such as color, flavour, texture, and overall acceptance of analogue meatball. The best characteristic of analogue meatball was comparison between green bean flour and wheat flour 30 g : 70 g i.e. 59.00 percent of water content, 1.34 percent of ash content, 6.88 percent of protein content, 1.77 percent of fat content, 1.77 percent of crude fiber content, level of elasticity 6.38 N, color (liked), aroma (neutral), texture (liked) with chewy characteristics, with the taste is rather not typical of green beans and liked, and overall acceptance (liked).


2019 ◽  
Vol 8 (2) ◽  
pp. 140
Author(s):  
I Dewa Gede Dwi Agastia Utama ◽  
Ni Wayan Wisaniyasa ◽  
I Wayan Rai Widarta

This study aims to determine the effect of wheat flour ratio with corn sprouts flour on the characteristics of flakes produced and the exact composition of wheat flour with corn sprouts flour that is able to produce flakes with the best characteristics. The experimental design used was Completely Randomized Design with treatment factor that is the comparative treatment of flour with corn sprouts flour which consist of 5 levels: 50%:50%; 40%:60%; 30%:70%; 20%:80%; 10%:90%. The treatment was repeated 3 times to obtain 15 units of experiment. The data obtained were analyzed by variance and if the treatment had an effect on the observed variable then continued with Duncan test. The comparison of wheat flour with corn sprout flour significantly affected water content, ash content, fat content, protein content, carbohydrate content, coarse fiber content, tensile strength, color (hedonic test), aroma (hedonic test), texture (hedonic test and scoring ), taste (hedonic test) as well as overall acceptance (hedonic test) flakes. Comparison of 30% wheat flour : 70% corn sprouts flour produces flakes with the best characteristics, namely: water content was 2.94%, ash content was 2.99%, fat content was 11.60%, protein content was 14.40%, carbohydrate content was 68.08%, crude fiber content was 6.25%, tensile strength was 4.24 N, color liked, aroma some liked, texture crispy and liked, taste liked and overall acceptance liked.


2018 ◽  
Vol 7 (4) ◽  
pp. 175
Author(s):  
I Gusti Agung Ayu Sintia Padma Dewi ◽  
I Gusti Ayu Ekawati ◽  
I Desak Putu Kartika Pratiwi

The purpose of this research was to know the effect of germination time of millet (Panicum milliaceum) on the characteristics of flakes and to know the right germination time of millet on the characteristics of flakes. The experimental design used was completely randomized design with the germination time of millet treatment, namely 24 hours (T1), 48 hours (T2), 72 hours (T3), 96 hours (T4), and 120 hours (T5). The treatment was repeated 3 repetitions then obtained 15 units of the experiment, the data obtained from the result were analyzed by variance and if the treatment had an effect on the variable then continued with Duncan test. The results showed that the germination of millet had significant effect to water content, ash content, protein content, fat content, crude fiber content, tannin content, taste level (hedonic test), and overall acceptance of flakes. 120 hours germination time of millet had the best characteristics with water content 1,36%, ash content 2,65%, protein content 9,93%, fat content 7,86%, carbohydrate content 78,20%, crude fiber content 5,93, tannin content 0,31%, color liked, flavor liked, texture crispy and liked, taste liked  and overall acceptance liked.


2021 ◽  
Vol 10 (1) ◽  
pp. 153
Author(s):  
Ika Septiana ◽  
Luh Putu Trisna Darmayanti ◽  
I Made Sugitha

This research aims to determine the comparison effect of coconut pulp flour with grated cassava on the characteristics of klenyem cake, and to find out the exact ratio of coconut flour and grated cassava so as to produce the best characteristics of klenyem cake. The experimental design used Completely Randomized Design (CRD) with treatment of coconut pulp flour and grated cassava ratio consist 6 levels : 20% : 80%; 30% : 70%; 40% : 60; 50% : 50%; 60% : 40%; 70% : 30%. Each treatment was repeated 3 times so obtained 18 experimental units. The parameters observed were water content, ash content, protein content, fat content, carbohydrate content, crude fiber content and the sensory test of the klenyem cake.The data obtained were using Analysis of Variance (ANOVA) and if the significant effect to the variables, followed by The Duncan Multiple Range Test (DMRT). The results showed that the comparison of coconut pulp flour and grated cassava have a significant effect on the water content, ash content, protein content, fat content, carbohydrate content, crude fiber content, color and texture (scoring), aroma, taste and overall acceptance (hedonic). Comparison of coconut pulp flour with grated cassava 40%: 60% has been able to produce the best characteristics of klenyem cake. The parameter results of 40% coconut pulp flour with 60% grated cassava that is water content 32.54%, ash content 1.78%, protein content 2.85%, fat content 33.72%, carbohydrate content 33.61%, crude fiber content 21.62%, yellow color, soft texture, aroma liked, taste liked and overall acceptance liked.


2021 ◽  
Vol 332 ◽  
pp. 08003
Author(s):  
Tantri A. Iranza ◽  
Ismed Suhaidi ◽  
Rona J. Nainggolan

Comparison of fig leaves with stevia leaves and drying time were evaluated for their effect on the quality of fig leaf teabags. The study was designed using a factorial completely randomized design with 2 factors: the ratio of fig leaves to stevia leaves (D) and drying time (P). The results of the analysis showed that the ratio of fig leaves and stevia leaves had a very significant effect on the water content, total sugar, and total phenol and had no significant effect on the crude fiber content. Drying time has a very significant effect on water content, total phenol, and crude fiber content, and has no significant effect on total sugar. The interaction between the 2 factors gave a very significant effect on the total phenol. The best fig leaf tea formulation is 95% fig leaf: 5% stevia leaf and 120 minutes drying time with antioxidant activity content of 23.81 g/mL.


2020 ◽  
Vol 9 (2) ◽  
pp. 161
Author(s):  
Maureen Sabila ◽  
I Ketut Suter ◽  
Putu Timur Ina

The research aims to determine the effect of wheat flour and brown rice flour ratio to the characteristics of lumpur cake and to know the right ratio from wheat flour and brown rice flour to produce lumpur cake with the best characteristics. The Completely Randomized Design was used in this research with the treatment ratio of wheat flour and brown rice flour which consisted of six levels, such as 100% : 0%, 80% : 20%, 60% : 40%, 40% : 60%, 20% : 80%, and 0% : 100%. Each treatments was repeated 3 times so that obtain 18 experiment units. The datas were analyzed by analysis of variance and if there were some effects of the treatment, the analysis followed by Duncan's Multiple Range Test. The result showed that wheat flour and brown rice flour ratio had some effects on water content, crude fiber content, anthocyanin content, antioxidant activity and color of lumpur cake. Ratio of 0% wheat flour and 100% brown rice flour had the best characteristics, with 53.21 % water content, 7.61% crude fiber content, 20.20 mg/100g anthocyanin content, 72.27% antioxidant activity, with sensory characteristics color and aroma liked, texture, taste and overall acceptance netral. Keywords: wheat flour, brown rice flour, characteristics, lumpur cake.


2021 ◽  
Vol 10 (2) ◽  
pp. 101-112
Author(s):  
Ulyarti ◽  
Surhaini ◽  
Adha Farwati

The amount of fibre consumption in Indonesia is lower than recommended by WHO.  The use of nypa flour as wheat substitution in biscuit formulation is able to increase fibre content in biscuit.  The aims of this research were to determine the effect of Nypa fruticans flour to the physicochemical and sensory properties of high-fiber biscuit. This research used a completely randomized design (CRD) with the concentration of Nypa fruticans flour (0, 10, 20, 30, 40, 50, and 60%) as the treatments.  Data was analysed by ANOVA and DnMRT at 95% confidence level. The result showed that Nypa flour had 10% water content , 3,18% crude fiber content and color characteristic L * = 87,57; a * = -3,33; and b * = 20,17. The concentration of Nypa flour significantly affect water and crude fiber content, color characteristic, crispyness and grit, but did not significantly affect hardness, spread ratio, color (sensory), taste, aroma, overall acceptance and multiple comparison.  The concentration of  40% nypa flour  was the best treatment to produce high-fiber biscuit with 2,78% water content, 1,47% crude fiber content, hardness 1301,3 gF, spread ratio 5,15, color characteristic (L * = 75,51; a * = 0,18; b * = 30,00), color description (brownish yellow), slightly crunchy, rough, taste (rather liked), aroma (rather liked), and overall acceptance (rather liked).  Multiple comparison tests showed that the biscuit  favored by panelists similar to the reference biscuit.


2018 ◽  
Vol 10 (1) ◽  
pp. 21-27
Author(s):  
Sutrisno Adi Prayitno ◽  
Restu Tjiptaningdyah ◽  
Fadjar Kurnia Hartati

The purpose of this research is to know the response of mocaf flour and wheat flour ratio to the chemical and organoleptic properties of steamed brownies cake. The research method used is experimental method, using Completely Randomized Design with 1 factor and 5 repetition, that are the ratio factor of mocaf flour and wheat flour are 5 levels, so the total replication becomes 25 times. The results showed that the ratio of mocaf and wheat flour did not have a significant effect on water content but had a very significant effect on crude fiber content. While the ratio of mocaf and wheat flour have no significant effect on organoleptic taste, color and flavor but have a very real effect on the tenderness of steamed brownies cake. The results of effectiveness test of mocaf and wheat flour efficacy ratio of 40:60 is the best treatment with the result value of 0.72 whereas the lowest treatment is the treatment of mocaf and wheat flour ratio of 100:0 with the result value of 0.37.


2020 ◽  
Vol 8 (10) ◽  
pp. 1191-1194
Author(s):  
Diana Sylvi ◽  
◽  
Rifma Eliyasmi ◽  
Elfa Susanti Thamrin ◽  
◽  
...  

This research aim to determine the effect of giving sucrose with different concentrations on the characteristic of nata produced and to determine the best addition of sucrose concentration. The raw materials used in this study were roselle petals and coconut water. The treatment in this study was sucrose which was added as a carbon source of Acetobacterxylinum with a combination of treatments being 4%, 6%, 8%, and 10%. This study used Completely Randomized Design (CRD) with 3 replications. The result showed that in the initial fermentation medium, the sucrose concentration had no significant effect on the initial pH of fermentation but had a significant effect on sugar content. In the resulting nata de coco, the sucrose concentration had no significant effect on thickness, weight, yield, vitamin C levels, and organolepic values but had a significant effect on crude fiber content. Sucrose treatment with 8% concentration produced the best product with a pH initial of fermentation 4.21, sugar content 10.20 0Brix, 81.16 thick, 400 g weight, 80% yield, 11.29 mg/100g vitamin C content, 1.36% crude fiber content, and organoleptically preferred.


2021 ◽  
Vol 16 (4) ◽  
pp. 354-361
Author(s):  
D. L. Rukmi ◽  
M. N. A. Muslim ◽  
E. C. Wulandari ◽  
S. Mulyani ◽  
A. M. Legowo

The purpose of this study was to determine the physical and organoleptic qualities of milk-based caramel with variations in the use of pineapple (Ananas comosus (L) Merr.). The design of this study used a completely randomized design (CRD) with five treatments and four replications. The tested treatments include milk-based caramel, which was processed with pineapple juice at T0=0%; T1=5%; T2=10%; T3=15%; T4=20%. The research variables included physical quality testing consisting of water content and crude fiber content, further testing of texture, color, and panelists' preference as organoleptic parameters tested using sensory tests. The observations obtained will be processed using analysis of variance (ANOVA) with a level of 5% and will be further tested using Duncan's Multiple Range Test (DMRT) if it shows a significant effect. Based on the results of analysis of variance (ANOVA), the variation in various treatments with the addition of pineapple fruit in the milk-based caramel processing showed a significant effect (P<0.05) on the physical quality of caramel (crude fiber content and water content) and organoleptic quality (texture, color), and preference) on milk-based caramel products. The percentage of crude fiber content is 0.35%-4.50%; moisture content 10.15%-15.63%; texture score is hard to not hard; the color score is light brown to brown and liking score is slightly like to like. The conclusion of this research was the addition of pineapple affects crude fiber content, milk caramel water content, texture, color, and milk caramel preference.


Sign in / Sign up

Export Citation Format

Share Document