Effect of wearing complete dental prosthesis on candidal count

Author(s):  
Ankur Bhargava ◽  
Sonal Saigal

Background: Infection due to fungi have increased dramatically in recent years and are of prime importance because of the rising number of immunocompromised patients, such as cancer patients receiving chemotherapy, and human immunodeficiency virus infected patients. The aim of the analysis was to compare the candidal count at the time of insertion and after one month of wearing complete dentures.Methods: It was a quasi-experimental study which consisted of forty edentulous patients with no previous denture history. They obtained new complete dentures. Samples were taken using the oral rinse technique and cultured on sabouraud agar for fungal growth and cultured positive samples had undergone for germ tube test in serum media.Results: Candidal colonies were detected and counted as colony forming units at the time of insertion and after one month of wearing complete dentures. Change in candidal count was significantly higher after one month of wearing complete dentures (p=0.0001). Difference in candidal count was significantly higher in females than males.Conclusions: Candidal count was significant after wearing complete dentures and this should be considered as an important factor that can pre-dispose the patients to candida induced denture stomatitis.

2022 ◽  
Author(s):  
Samiha Yousef Sartawi ◽  
Yazan Hassona ◽  
Dua'a Alqaisi ◽  
Nesreen A Salim ◽  
Salah AL-Omoush

Abstract Objectives: To obtain baseline information on Oral Mucosal Conditions (OMCs) and its relation to age, sex, medical history and the use of complete denture in a sample of edentulous patients. Materials and methods: Edentulous patients attending a university hospital were examined for the presence of OMCs, and demographic data were recorded. Statistical analysis was carried out on SPSS software; the following statistical tests were utilized: descriptive statistics, The Mann Whitney U test, Spearman’s Rho rank correlations, and The hierarchical logistic regression analysis. Results: A total of one hundred and sixty-one participants were examined (34 females and 127 males with a mean age of 59.08 years). More than half of the participants (59.6 %) were non-denture wearers and (40.6%) were denture wearers. Longer edentulism, using dentures for longer duration, and the use of more previous dentures were associated with higher Atwood’s ridge classification. Smoking was associated with higher prevalence of OMCs, particularly hairy tongue, frictional keratosis, smokers’ palate, and leukoedema. Denture wearers had more denture stomatitis and denture induced hyperplasia, and less frictional keratosis than non-denture wearers. Participants with cardiac disease had more incidences of geographic tongue and tie tongue. Conclusion: Mucosal changes with increased age, smoking, medical conditions, and medications may be superimposed by wearing complete dentures.


Author(s):  
H.M. Mazzone ◽  
G. Wray ◽  
R. Zerillo

The fungal pathogen of the Dutch elm disease (DED), Ceratocystis ulmi (Buisman) C. Moreau, has eluded effective control since its introduction in the United States more than sixty years ago. Our studies on DED include establishing biological control agents against C. ulmi. In this report we describe the inhibitory action of the antibiotic polymyxin B on the causal agent of DED.In screening a number of antibiotics against C. ulmi, we observed that filter paper discs containing 300 units (U) of polymyxin B (Difco Laboratories) per disc, produced zones of inhibition to the fungus grown on potato dextrose agar or Sabouraud agar plates (100mm x 15mm), Fig. 1a. Total inhibition of fungal growth on a plate occurred when agar overlays containing fungus and antibiotic (polymyxin B sulfate, ICN Pharmaceuticals, Inc.) were poured on the underlying agar growth medium. The agar overlays consisted of the following: 4.5 ml of 0.7% agar, 0.5 ml of fungus (control plate); 4.0 ml of 0.7% agar, 0.5 ml of fungus, 0.5 ml of polymyxin B sulfate (77,700 U). Fig. 1, b and c, compares a control plate and polymyxin plate after seven days.


2021 ◽  
Vol 45 (1) ◽  
Author(s):  
Eman M. Ibraheem ◽  
Hisham S. ElGabry

Abstract Background This study aimed to evaluate the effect of mandibular complete dentures relining using soft relining material on the distribution of various occlusal forces using T-Scan system. Fifty completely edentulous patients having their conventional complete dentures earlier fabricated and utilized were selected for this study. Patients were controlled diabetics, characterized by having their residual alveolar ridges moderately developed and lined with firm mucoperiosteum. Mandibular complete dentures were relined with soft denture liner and T-Scan device was used for occlusal force distribution measurement prior to denture relining and three months thereafter the relinning procedure. Results Comparison between occlusal forces percentages before and after denture relining revealed that occlusal forces percentages was significantly lower after denture relining in anterior area, significantly higher after denture relining in right posterior area, where it was insignificantly higher after relining in left posterior area. Conclusions Our findings revealed that the use of soft denture liner for mandibular complete denture relining significantly improved the occlusal load distribution. Clinical trial registration Trial registration NCT, NCT04701970. Registered 23/11/2020—Retrospectively registered, https://clinicaltrials.gov/ct2/show/NCT04701970


2021 ◽  
Vol 11 (13) ◽  
pp. 5786
Author(s):  
Hwa-Jung Lee ◽  
Jeongho Jeon ◽  
Hong Seok Moon ◽  
Kyung Chul Oh

This technical procedure demonstrates a 4-step completely digital workflow for the fabrication of complete dentures in edentulous patients. The digital scan data of the edentulous arches were obtained using an intraoral scanner, followed by the fabrication of modeless trial denture bases using additive manufacturing. Using the trial denture base and a wax rim assembly, the interarch relationship was recorded. This record was digitized using an intraoral scanner and reversed for each maxillary and mandibular section individually. The digital scan data directly obtained using the intraoral scanner were superimposed over the reversed data, establishing a proper interarch relationship. The artificial teeth were arranged virtually and try-in dentures were additively manufactured. Subsequently, the gingival and tooth sections were additively manufactured individually and characterized. Thus, fabrication of digital complete dentures can be accomplished using digital data characteristics. The workflow includes data acquisition using an intraoral scanner, data processing using reverse engineering and computer-aided design software programs, and additive manufacturing.


2014 ◽  
Vol 15 (6) ◽  
pp. 712-716 ◽  
Author(s):  
Suresh Nagaral ◽  
Raviraj G Desai ◽  
Vikas Kamble ◽  
Anand Kumar G Patil

ABSTRACT Background Wearing a dental prosthesis is known to increase oral candidal colonization and predispose the wearer to oral candidosis. Denture wearers frequently use fingers to take the prosthesis out of their mouth. Oral Candida, if present may contaminate wearer's finger. The objective of this study was to investigate the simultaneous candidal colonization of oral cavity and fingertips of complete denture wearers. Materials and methods A total of 25 apparently healthy male subjects who had worn complete dentures for at least 1 year were selected. Information about each patient's denture age, denture hygiene, handling, and wearing habits, and hand washing habits after denture handling were be obtained. Intraoral examination of all the patients was done. For microbiological examination samples were collected from the fingertip and oral rinse of each patient. Candida species were identified with use of germ tube test and commercially available yeast identification system. Data was statistically analyzed. Significance was set at p < 0.05. Results It was found that frequency of hand washing, denture handling and denture stomatitis with respect to fingertip candidal isolation was not statistically significant. But poor denture hygiene and denture stomatitis with respect to oral candidal colonization was statistically significant. Conclusion Denture wearers with oral Candida had a higher prevalence of Candida contamination on their fingers. Patients with removable prostheses should be informed about the importance of proper prosthesis and personal hygiene and the possibility of microbial contamination of the hands and other parts of the body. How to cite this article Nagaral S, Desai RG, Kamble V, Patil AKG. Isolation of Candida Species from the Oral Cavity and Fingertips of Complete Denture Wearers. J Contemp Dent Pract 2014;15(6):712-716.


2020 ◽  
Vol 4 (5) ◽  
pp. 116-119
Author(s):  
Parul Uppal Malhotra ◽  
Neera Ohri ◽  
Yagyeshwar Malhotra ◽  
Anindita Mallik

Candida albicans is the most common Candida species isolated from the oral cavity both in healthy and diseased. Candida albicans is a dimorphic fungus existing both in blastopore phase (yeast phase) and the hyphal or mycelial phase. Although these organisms typically colonize mucocutaneous surfaces, the latter can be portals of entry into deeper tissues when host defences are compromised. Denture stomatitis is a common form of oral candidiasis that manifests as a diffuse inflammation of the maxillary denture bearing areas & is associated with angular cheilitis. At least 70% of individuals with clinical signs of denture stomatitis exhibit fungal growth & these conditions most likely result from yeast colonization of the oral mucosa combined with Bacterial colonization. Candida species act as an endogenous infecting agent on tissue predisposed by chronic trauma to microbial invasion. At one time, oral fungal infections were rare findings in general dentist's office. They were more commonly seen in hospitalized and severely debilitated patients. However with enhanced medical and pharmaceutical technology, increasing numbers of ambulatory immunosuppressed individuals with oral fungal infections are seeking out general dentists for diagnosis and treatment of these lesions.


Cureus ◽  
2019 ◽  
Author(s):  
Madhankumar Seenivasan ◽  
Fathima Banu ◽  
Athiban Inbarajan ◽  
Parthasarathy Natarajan ◽  
Shanmuganathan Natarajan ◽  
...  

Life ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 53 ◽  
Author(s):  
Jacob Heinz ◽  
Tim Krahn ◽  
Dirk Schulze-Makuch

The habitability of Mars is strongly dependent on the availability of liquid water, which is essential for life as we know it. One of the few places where liquid water might be found on Mars is in liquid perchlorate brines that could form via deliquescence. As these concentrated perchlorate salt solutions do not occur on Earth as natural environments, it is necessary to investigate in lab experiments the potential of these brines to serve as a microbial habitat. Here, we report on the sodium perchlorate (NaClO4) tolerances for the halotolerant yeast Debaryomyces hansenii and the filamentous fungus Purpureocillium lilacinum. Microbial growth was determined visually, microscopically and via counting colony forming units (CFU). With the observed growth of D. hansenii in liquid growth medium containing 2.4 M NaClO4, we found by far the highest microbial perchlorate tolerance reported to date, more than twice as high as the record reported prior (for the bacterium Planococcus halocryophilus). It is plausible to assume that putative Martian microbes could adapt to even higher perchlorate concentrations due to their long exposure to these environments occurring naturally on Mars, which also increases the likelihood of microbial life thriving in the Martian brines.


2012 ◽  
Vol 65 (3-4) ◽  
pp. 163-167
Author(s):  
Ljiljana Strajnic ◽  
Branka Miskovic

The aim of this study was to provide longitudinal evaluation of the changes after complete dentures therapy and the rate of residual ridge resorption through a six-year period of denture wearing. The authors presented the case of a 76-year-old patient, edentulous for twelve years, wearing complete dentures for six years, with the eugnat jaw relationship. Cephalometric radiograph was carried out in the process of new complete denture production, while the evaluation was carried out after six years. Cephalometric analysis was performed by using ?Dr. Ceph? computer software (FYI Technologies, GA, USA). After six years, the reduction of anterior total facial height was 5.5 mm and the anterior lower facial height was 5.5 mm, the vertical residual ridge reduction of the maxilla was 1.4 mm and the reduction of the mandible was 3mm. The study confirms the reliability and advantages of cephalometric analyses and reveals their application possibilities in prosthetic diagnostics and therapy, as well as in evaluation of rehabilitative results in edentulous patients and longitudinal analysis of changes on the orofacial complex tissues and intemaxillary relationships.


Sign in / Sign up

Export Citation Format

Share Document