scholarly journals Preheated composite: Innovative approach for aesthetic restoration

2021 ◽  
Vol 11 (2) ◽  
pp. 103-107
Author(s):  
Reema N Asani ◽  
Vandana J Gade ◽  
Kalyani G Umale ◽  
Rachana Gawande ◽  
Rohit R Amburle ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Review Article ◽  
Innovative Approach ◽  
Volumetric Shrinkage ◽  
Adhesion Failure ◽  
Restorative Materials ◽  
Contraction Stress

Resin-based composites are today one of the most widely used restorative materials. However, its most debilitating problem is volumetric shrinkage due to polymerization which may result in contraction stress and subsequent micro leakage and adhesion failure. Preheating composites prior to polymerisation have several advantages over conventional composites. This review article highlights the mechanical properties, advantages and significance of preheated composites.

scholarly journals Advances in Fabricating the Electrospun Biopolymer-Based Biomaterials

2021 ◽  
Vol 12 (2) ◽  
pp. 26
Author(s):  
Sebastian Wilk ◽  
Aleksandra Benko
Keyword(s):  
Mechanical Properties ◽  
Whey Protein ◽  
Antimicrobial Properties ◽  
Protein Isolate ◽  
Review Article ◽  
Animal Tissues ◽  
Green Material ◽  
Good Potential ◽  
Fibrous Morphology ◽  
Selection Of

Biopolymers formed into a fibrous morphology through electrospinning are of increasing interest in the field of biomedicine due to their intrinsic biocompatibility and biodegradability and their ability to be biomimetic to various fibrous structures present in animal tissues. However, their mechanical properties are often unsatisfactory and their processing may be troublesome. Thus, extensive research interest is focused on improving these qualities. This review article presents the selection of the recent advances in techniques aimed to improve the electrospinnability of various biopolymers (polysaccharides, polynucleotides, peptides, and phospholipids). The electrospinning of single materials, and the variety of co-polymers, with and without additives, is covered. Additionally, various crosslinking strategies are presented. Examples of cytocompatibility, biocompatibility, and antimicrobial properties are analyzed. Special attention is given to whey protein isolate as an example of a novel, promising, green material with good potential in the field of biomedicine. This review ends with a brief summary and outlook for the biomedical applicability of electrospinnable biopolymers.

Polymerization contraction stress in light-cured compomer restorative materials

2003 ◽  
Vol 19 (7) ◽  
pp. 597-602 ◽  
Author(s):  
H.Y Chen ◽  
J Manhart ◽  
K.-H Kunzelmann ◽  
R Hickel
Keyword(s):  
Restorative Materials ◽  
Contraction Stress

scholarly journals Mechanical properties, volumetric shrinkage and depth of cure of short fiber-reinforced resin composite

2016 ◽  
Vol 35 (3) ◽  
pp. 418-424 ◽  
Author(s):  
Akimasa TSUJIMOTO ◽  
Wayne W. BARKMEIER ◽  
Toshiki TAKAMIZAWA ◽  
Mark A. LATTA ◽  
Masashi MIYAZAKI
Keyword(s):  
Mechanical Properties ◽  
Resin Composite ◽  
Short Fiber ◽  
Volumetric Shrinkage ◽  
Fiber Reinforced ◽  
Depth Of Cure

scholarly journals Mechanical properties of dental restorative materials: relative contribution of laboratory tests

2003 ◽  
Vol 11 (3) ◽  
pp. 162-167 ◽  
Author(s):  
Linda Wang ◽  
Paulo Henrique Perlatti D'Alpino ◽  
Lawrence Gonzaga Lopes ◽  
José Carlos Pereira
Keyword(s):  
Mechanical Properties ◽  
Laboratory Tests ◽  
Clinical Performance ◽  
Dental Materials ◽  
Correct Selection ◽  
Relative Contribution ◽  
Dental Restorative Materials ◽  
Restorative Materials ◽  
Dental Restorative ◽  
Selection Of

A wide variety of dental products that are launched on the market becomes the correct selection of these materials a difficult task. Although the mechanical properties do not necessarily represent their actual clinical performance, they are used to guide the effects of changes in their composition or processing on these properties. Also, these tests might help somehow the clinician to choose once comparisons between former formulations and new ones, as well as, with the leading brand, are highlighted by manufactures. This paper presents a review of the most important laboratory tests. In this manner, the knowledge of these tests will provide a critical opinion related to the properties of different dental materials.

Additive manufacturing of ceramics: Present status and future perspectives

2021 ◽  
Author(s):  
Mainak Saha ◽  
Manab Mallik
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Microstructure Evolution ◽  
Review Article ◽  
Low Density ◽  
Structure Property ◽  
Future Perspectives ◽  
Structural Applications ◽  
Systematic Structure ◽  
State Of Research

At present, fabrication of ceramics using AM-based techniques mainly suffers from two primary limitations, viz: (i) low density and (ii) poor mechanical properties of the finished components. It is worth mentioning that the present state of research in the avenue of AM-based ceramics is focussed mainly on fabricating ceramic and cermet components with enhanced densities and improved mechanical properties. However, to the best of the authors’ knowledge, not much is known about the microstructure evolution and its correlation with the mechanical properties of the finished parts. Addressing the aforementioned avenue is highly essential for understanding the utilisation of these components for structural applications. To this end, the present review article is aimed to address the future perspectives in this avenue has been provided with a special emphasis on the need to establish a systematic structure-property correlation in these materials.

scholarly journals Thiolation of Biopolymers for Developing Drug Delivery Systems with Enhanced Mechanical and Mucoadhesive Properties: A Review

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1803
Author(s):  
Vivek Puri ◽  
Ameya Sharma ◽  
Pradeep Kumar ◽  
Inderbir Singh
Keyword(s):  
Mechanical Properties ◽  
Drug Delivery ◽  
Efficient Method ◽  
Drug Delivery Systems ◽  
Delivery Systems ◽  
Review Article ◽  
Present Review ◽  
Tabular Form ◽  
Thiolated Polymers ◽  
Drug Delivery Applications

Biopolymers are extensively used for developing drug delivery systems as they are easily available, economical, readily modified, nontoxic, biodegradable and biocompatible. Thiolation is a well reported approach for enhancing mucoadhesive and mechanical properties of polymers. In the present review article, for the modification of biopolymers different thiolation methods and evaluation/characterization techniques have been discussed in detail. Reported literature on thiolated biopolymers with enhanced mechanical and mucoadhesive properties has been presented conspicuously in text as well as in tabular form. Patents filed by researchers on thiolated polymers have also been presented. In conclusion, thiolation is an easily reproducible and efficient method for customization of mucoadhesive and mechanical properties of biopolymers for drug delivery applications.

scholarly journals Contraction and Hydroscopic Expansion Stress of Dental Ion-Releasing Polymeric Materials

Polymers ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 1093
Author(s):  
Krzysztof Sokolowski ◽  
Agata Szczesio-Wlodarczyk ◽  
Kinga Bociong ◽  
Michal Krasowski ◽  
Magdalena Fronczek-Wojciechowska ◽  
...  
Keyword(s):  
Stress State ◽  
Water Sorption ◽  
Glass Ionomer Cement ◽  
Polymeric Materials ◽  
Stress Changes ◽  
Restorative Materials ◽  
Influence Of Water ◽  
Contraction Stress ◽  
Photoelastic Analysis ◽  
Absorption Dynamic

Ion-releasing polymeric restorative materials seem to be promising solutions, due to their possible anticaries effect. However, acid functional groups (monomers) and glass filler increase hydrophilicity and, supposedly, water sorption. The purpose of the study was to evaluate the influence of water sorption of polymeric materials on the stress state at the restoration-tooth interface. Beautifil Bulk Fill Flow, Beautifil Flow Plus F00, Beautifil Flow F02, Dyract eXtra, Compoglass Flow, Ionosit, Glasiosite, TwinkiStar, Ionolux and Fuji II LC were used for the study. The stress state was measured using photoelastic analysis after: 0.5, 24, 72, 96, 168, 240, 336, 504, 672, 1344 and 2016 h. Moreover, water sorption, solubility and absorption dynamic were assessed. The water sorption, solubility and absorption dynamic of ion-releasing restorative materials are material dependent properties. The overall results indicated that the tested restorative materials showed significant stress decrease. The total reduction in contraction stress and water expansion stress was not observed for materials with low value of water sorption (Beautifil Bulk Fill, Dyract eXtra, Glasionosit and Twinky Star). The photoelastic method turned out to be inadequate to evaluate stress changes of resin modified glass-ionomer cement (RMGI, Fuji II LC and Ionolux).

Effects of Micropores on Processing and Properties of Porous Irons

2017 ◽  
Vol 863 ◽  
pp. 26-32
Author(s):  
Ming Zhou Su ◽  
Hui Meng Wang ◽  
Chang Chen
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Corn Starch ◽  
Sintering Temperature ◽  
Starch Content ◽  
Volumetric Shrinkage ◽  
Small Particle Size ◽  
Compressive Properties ◽  
Different Temperatures ◽  
Powder Metallurgy Route

Porous irons with only micropores were produced through powder metallurgy route. Corn starch of small particle size (5-15μm) was utilized to regulate the densification of green compacts. The structural and mechanical properties of porous irons sintered at different temperatures were evaluated. The porosities increased with increasing the starch content, which reduced compressive strength and increased volumetric shrinkage. The compressive yield stress increased with increasing sintering temperature. It was also found that the effect of sintering temperature on the microstructure and compressive properties was more obvious when green compacts were less densified. Moreover, volumetric shrinkage of porous irons without adding starch remains in a quite low level for different sintering temperatures.

Sign in / Sign up

Export Citation Format

Share Document