scholarly journals Study of the Effect of Plastic Waste Fibers Incorporation on the Behavior of Self Compacting Concrete

2021 ◽  
Vol 45 (5) ◽  
pp. 417-421
Author(s):  
Laid Baali ◽  
Larbi Belagraa ◽  
Mohamed Aziz Chikouche ◽  
Leila Zeghichi
Keyword(s):  
Mechanical Properties ◽  
Building Materials ◽  
Physical And Mechanical Properties ◽  
Plastic Waste ◽  
Ductile Material ◽  
Cement Matrix ◽  
Self Compacting Concrete ◽  
Mechanical Responses ◽  
Hard State ◽  
The Stability

The use of waste and by-products has been for many decades for the manufacturing of building materials such as concrete and mortars. That responds simultaneously to reasons of economy of natural resources in aggregates (C&D waste) and the possibility of recovering industrial waste additions as replacement in composites. The present study focuses on the use of plastic waste fibers embedded in the cement matrix of self-compacting concrete SCC to improve its properties, either rheological mainly, the stability at fresh state or mechanical responses such as compressive and tensile strengths at hard state. This incorporation of plastic fiber reinforcement on the structure matrix could result an alternative SCC composite as a ductile material with enhanced properties. In this context, the self-compacting composites by adding a variable percentage of plastic fibers at 0.5, 1, 1.5% is formulated. Hence, the effect of plastic fibers waste on the rheological and mechanical properties of SCC is assessed. The obtained results in the present study let us to conclude the beneficial effect of such inclusion of plastic fibers on this new confected SCC fiber composition with acceptable rheological, physical and mechanical properties compared to those of a normal SCC concrete.

Study of the Effect of PP and LDPE Thermoplastic Binder Addition on the Mechanical Properties and Physical Properties of Particulate Composites for Building Material Application

2019 ◽  
Vol 964 ◽  
pp. 115-123
Author(s):  
Sigit Tri Wicaksono ◽  
Hosta Ardhyananta ◽  
Amaliya Rasyida ◽  
Feisha Fadila Rifki
Keyword(s):  
Mechanical Properties ◽  
Compression Strength ◽  
Building Materials ◽  
Construction Material ◽  
Construction Materials ◽  
Physical And Mechanical Properties ◽  
Waste Recycling ◽  
Plastic Waste ◽  
Particulate Composites ◽  
Water Absorbability

Plastic waste is majority an organic material that cannot easily decomposed by bacteria, so it needs to be recycled. One of the utilization of plastic waste recycling is become a mixture in the manufacture of building materials such as concrete, paving block, tiles, roof. This experiment purpose to find out the effect of addition of variation of LDPE and PP thermoplastic binder to physical and mechanical properties of LDPE/PP/Sand composite for construction material application. In this experiment are using many tests, such are SEM, FTIR, compression strength, density, water absorbability, and hardness. the result after the test are the best composition of composite PP/LDPE/sand is 70/0/30 because its have compression strength 14,2 MPa, while density value was 1.30 g/cm3, for the water absorbability is 0.073%, and for the highest hardness is 62.3 hardness of shore D. From the results obtained, composite material can be classified into construction materials for mortar application S type with average compression strength is 12.4 MPa.

Study of Cement Composites Properties with Filler Based on Wood Pulp

2014 ◽  
Vol 897 ◽  
pp. 165-170 ◽  
Author(s):  
Lucia Kidalova ◽  
Nadežda Števulová ◽  
Anton Geffert
Keyword(s):  
Mechanical Properties ◽  
Building Materials ◽  
Raw Materials ◽  
Volume Ratio ◽  
Physical And Mechanical Properties ◽  
Wood Pulp ◽  
Cement Matrix ◽  
Cement Composites ◽  
Renewable Materials ◽  
Cellulosic Fibres

Sustainable building materials are based on the use of renewable materials instead of non-renewable. A large group of renewable raw materials are materials of plant origin containing cellulosic fibres which are used as filler into building material with reinforcement function of composite. This study aimed to establish the mechanical and physical properties of cement composites with organic filler, such as wood pulp. Pulp derived from wood pulping process is very interesting material as reinforcement in cement which contributes to a reduction of pollutants. In this paper, utilization of unbleached and bleached wood pulp in combination with cement matrix with emphasis on the physical and mechanical properties is studied. Varying the producing technology (wood pulp and cement ratio in mixture) it is possible to obtain composites with density from 940 to 1260 kg.m-3 and with compressive strength from 1.02 to 5.44 MPa after 28 days of hardening. The experimental results of mechanical properties indicate that cement composites with using unbleached wood pulp reaches higher values than composites based on bleached wood pulp. The percentage of water uptake increased with increasing the volume ratio of unbleached wood pulp in composite.

scholarly journals Review of Research on Physical and Mechanical Properties and Engineering Application of Metal Tailings

2022 ◽  
Vol 2148 (1) ◽  
pp. 012059
Author(s):  
Shengfu Wang ◽  
Lechen Yan ◽  
Kaixi Xue ◽  
Liang Lv ◽  
Dongjie Zhang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Large Scale ◽  
Building Materials ◽  
Engineering Application ◽  
Physical And Mechanical Properties ◽  
Future Research ◽  
Tailing Dams ◽  
The Stability ◽  
Processing And Storage ◽  
And Storage

Abstract Processing and storage requirements for metal residues are becoming stricter to achieve the carbon neutralization target. The physical and mechanical properties of tailings affect the stability of tailing dams. Metal tailings can be used as secondary resources, and it is easy to pollute the environment under poorly managed conditions. Therefore, it is necessary and urgent to reuse these deposits such as iron tailings, copper tailings, zinc tailings et al. This article discusses the current research on the mechanical properties of metal tailings and its engineering application. Based on previous research, it is pointed out that there still needs more attention on the mechanical properties of metal tailing sands, especially under different conditions like dry-wet, freeze-thaw, dynamic loads and large-scale application. In the future, research on the filling of metal tailings as roadbed and new building materials will be one of the directions to solve the problem of tailing pond accumulation.

scholarly journals Physical and mechanical properties of the surface of pine wood modified with an organomineral composition

2021 ◽  
Vol 2124 (1) ◽  
pp. 012019
Author(s):  
A O Belyaev ◽  
V E Danilov ◽  
M V Morozova
Keyword(s):  
Mechanical Properties ◽  
Building Materials ◽  
Treated Wood ◽  
Untreated Wood ◽  
Physical And Mechanical Properties ◽  
Atmospheric Conditions ◽  
Color Coordinates ◽  
Protective Composition ◽  
The Stability ◽  
Technical Measures

Abstract The percentage of wooden buildings damaged or even lost due to the lack or insufficient technical measures for their preservation is growing every year. This fact makes it mandatory to treat the surface of wood building materials with protective and decorative agents. Within the framework of this study, a multifunctional protective composition for wood was developed that can increase its physical and mechanical properties. Modification of the wood surface with organomineral compositions leads to an increase in its density, hardness and strength. The hardness of the treated wood is 24% higher and the compressive strength along the fiber is 20% higher than that of untreated wood. After treatment, the surface of the wood darkened and slightly yellowed, which does not prevent its use in the construction and reconstruction of buildings. The results of measuring the color coordinates of the surface of the modified samples indicate the stability and durability of the developed protective coating even after 4 months of exposure to atmospheric conditions. Judging by the slight return of the color coordinates of the treated wood back to values of the original wood, it can be concluded that the composition is partially washed out.

scholarly journals Features of the hydration process of the modified blended cement for fiber cement panels

2018 ◽  
Vol 170 ◽  
pp. 03030 ◽  
Author(s):  
Rustem Mukhametrakhimov ◽  
Liliya Lukmanova
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Blended Cement ◽  
Physical And Mechanical Properties ◽  
Hydration Process ◽  
Cement Matrix ◽  
X Ray Diffraction ◽  
Structure Form ◽  
Silicate Phase ◽  
X Ray

The paper studies features of the hydration process of the modified blended cement for fiber cement panels (FCP) using differential thermal analysis, X-ray diffraction analysis, electron microscopy and infrared spectroscopy. It is found that deeper hydration process in silicate phase, denser and finer crystalline structure form in fiber cement matrix based on the modified blended cement. Generalization of this result to the case of fiber cement panels makes it possible to achieve formation of a denser and homogeneous structure with increased physical and mechanical properties.

scholarly journals Global analysis of DEF damage to concretes with and without fly-ash

2022 ◽  
Vol 15 (3) ◽  
Author(s):  
Nicole Pagan Hasparyk ◽  
Dioice Schovanz ◽  
Francieli Tiecher ◽  
Selmo Chapira Kuperman
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Global Analysis ◽  
Physical And Mechanical Properties ◽  
Test Method ◽  
Cement Matrix ◽  
Negative Effects ◽  
Ettringite Formation ◽  
Pozzolanic Cement ◽  
Over Time

Abstract Delayed Ettringite formation (DEF) is an internal expansive reaction that can damage concrete. DEF is strongly influenced by the temperature, above about 60-65°C, and other factors involving cement chemistry especially, but also its physical characteristics. The exposure environment over time also promotes a condition to increase deterioration from DEF. Expansions results from secondary ettringite formation are progressive and can lead concrete to microcracking impacting its performance and durability over time. Several concrete structures are pointed to be severely attacked by DEF, and test method as well a better comprehension on this pathology is necessary to promote specific and proper preventive measures to avoid future damages. Furthermore, compared to alkali-silica reaction, DEF occurs more readily and aggressively, and sometimes prematurely, depending on several factors, such as type of cement, concrete mix design, exposure conditions, among others. This paper involves an overall analysis of the behavior of concretes with two types of Portland cements (High early-strength cement and a Portland pozzolanic cement, with fly-ash) in relation to DEF process. Several data from a laboratory study where DEF was induced through a specific thermal curing procedure are presented and discussed. The analyses involved the assessment of physical, mechanical, and expansive properties besides microstructural monitoring of samples from concretes over time. These experiments allowed detecting high values of expansions from DEF (up to 1.2%) in the concrete without fly ash. The mechanical properties were severely impacted from this deleterious process; as expansions increased, losses in the mechanic and elastic properties were verified. Expansion levels in the order of 0.5% prompted remarkably high reductions and, at about 1% the losses were relevant for both strengths (tensile and compressive) and modulus of elasticity, of 60% and 80%, respectively, in the presence of cement without fly-ash. Concrete microstructure has indicated massive formations of ettringite as well as micro-cracking and the fragility of the cement matrix because of DEF. On the other hand, expansion up to 0.2% did not promote important negative effects on the properties of concrete, especially with the pozzolanic cement tested. Furthermore, an overall approach with several correlations between physical and mechanical properties was taken to obtain different levels of deterioration for a concrete presenting DEF.

scholarly journals Physical and Mechanical Properties of Cemented Ash-Based Lightweight Building Materials with and without Pumice

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Neslihan Doğan-Sağlamtimur ◽  
Adnan Güven ◽  
Ahmet Bilgil
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Building Material ◽  
Building Materials ◽  
Physical And Mechanical Properties ◽  
Mixing Ratio ◽  
Lightweight Material ◽  
Important Input ◽  
Axial Compressive Strength ◽  
International Companies

Pumice, cements (CEM I- and CEM II-type), waste fly and bottom ashes (IFA, GBA, and BBA) supplied from international companies were used to produce lightweight building materials, and physical-mechanical properties of these materials were determined. Axial compressive strength (ACS) values were found above the standards of 4 and 8 MPa (Bims Concrete (BC) 40 and 80 kgf/cm2 class) for cemented (CEM I) pumice-based samples. On the contrary, the ACS values of the pumice-based cemented (CEM II) samples could not be reached to these standards. Best ACS results (compatible with BC80) from these cemented lightweight material samples produced with the ashes were found in 50% mixing ratio as 10.6, 13.2, and 20.5 MPa for BBA + CEM I, GBA + CEM II, and IFA + CEM I, respectively, and produced with pumice were found as 8.4 MPa (same value) for GBA + pumice + CEM II (in 25% mixing ratio), BBA + pumice + CEM I (in 100% mixing ratio), and pumice + IFA + CEM I (in 100% mixing ratio), respectively. According to the results, cemented ash-based lightweight building material produced with and without pumice could widely be used for constructive purposes. As a result of this study, an important input to the ecosystem has been provided using waste ashes, whose storage constitutes a problem.

METHOD OF CALCULATION THE STABILITY OF AN EXCAVATOR EQUIPPED WITH A CONE ROLLER

2021 ◽  
pp. 12-16
Author(s):  
K. Z. Tilloev ◽  
S. V. Kondakov
Keyword(s):  
Mechanical Properties ◽  
Calculation Method ◽  
Physical And Mechanical Properties ◽  
Maximum Force ◽  
Compacted Soil ◽  
Method Of Calculation ◽  
Support Roller ◽  
The Stability

The construction and method of calculating the stability of a crawler excavator equipped with a new working body (cone roller) are considered. The calculation is made on two working positions (longitudinal and transverse) of the excavator, provided that the excavator must apply the maximum force on the working body at an angle of 90°. The force applied by the excavator boom to the cone roller during the introduction depends on the physical and mechanical properties of the compacted soil. The calculation method differs in that during the compaction of the roadbed, the cone sinks into the ground, and the excavator tends to roll in the direction of the rear track support roller, in contrast to the traditional danger of tipping over the front support roller when working with a bucket.

Cellulose Fibres as a Reinforcing Element in Building Materials

2017 ◽  
Author(s):  
Viola Hospodarova ◽  
Nadezda Stevulova ◽  
Vojtech Vaclavik ◽  
Tomas Dvorsky ◽  
Jaroslav Briancin
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Compressive Strength ◽  
Building Materials ◽  
Reference Sample ◽  
Physical And Mechanical Properties ◽  
Natural Fibre ◽  
Cement Composites ◽  
Cellulose Fibres ◽  
Cellulosic Fibres

Nowadays, construction sector is focusing in developing sustainable, green and eco-friendly building materials. Natural fibre is growingly being used in composite materials. This paper provides utilization of cellulose fibres as reinforcing agent into cement composites/plasters. Provided cellulosic fibres coming from various sources as bleached wood pulp and recycled waste paper fibres. Differences between cellulosic fibres are given by their physical characterization, chemical composition and SEM micrographs. Physical and mechanical properties of fibre-cement composites with fibre contents 0.2; 0.3and 0.5% by weight of filler and binder were investigated. Reference sample without fibres was also produced. The aim of this work is to investigate the effects of cellulose fibres on the final properties (density, water absorbability, coefficient of thermal conductivity and compressive strength) of the fibrecement plasters after 28 days of hardening. Testing of plasters with varying amount of cellulose fibres (0.2, 0.3 and 0.5 wt. %) has shown that the resulting physical and mechanical properties depend on the amount, the nature and structure of the used fibres. Linear dependences of compressive strength and thermal conductivity on density for plasters with cellulosic fibres adding were observed.

Sign in / Sign up

Export Citation Format

Share Document