scholarly journals Development of a novel intraarticular injection of diclofenac for the treatment of arthritis: a preclinical study in the rabbit model

2021 ◽  
Author(s):  
Xinyuan Wen ◽  
Xiaoqing Huang ◽  
Huosheng Wu
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Average Particle Size ◽  
Rabbit Model ◽  
Intraarticular Injection ◽  
Average Particle ◽  
Prepared Nanoparticles

Purpose: To develop a novel intraarticular injection of diclofenac for the treatment of arthritis. Method: Diclofenac loaded nanoparticles were prepared by a nanoprecipitation technique using Eudragit L 100 as the polymer and polyvinyl alcohol as the surfactant. The nanoparticles were evaluated for particle size, zeta potential, scanning electron microscopy, drug release, encapsulation efficiency, and loading efficiency studies. The optimized nanoparticulate formulation was developed for intra articular injection. Intraarticulate injection was evaluated for pH, appearance, viscosity, osmolarity and syringability studies. The optimized injection formulation was tested in an arthritic model consisting of 25 rabbits. Result: Nanoprecipitation method was found to be suitable for diclofenac nanoparticles. The shape of the prepared nanoparticles was found to be spherical and devoid of any cracks and crevices. The average particle size of a diclofenac nanoparticle was found to range from 87±0.47 to 103±0.26 nm. The zeta potential of the prepared nanoparticles was found to be in the range of 0.598±0.34 to 0.826±0.25 mV. The encapsulation efficiency was found to be between 73.45% to 99.03%, while the drug loading was observed between 10.34 to 35.32%. The percentage drug release at 12 hours was found to range from 73.45% to 99.03%. Conclusion: The developed intraarticular injection was found to be within the physically and chemically accepted limits. Animals treated with the intra articular injection of diclofenac showed a significant reduction in swelling as compares to the other groups.

Preparation of Epidermal Growth Factor-Modified Targeted Doxorubicin Nanoliposomes and Therapy of Liver Cancer

2021 ◽  
Vol 21 (9) ◽  
pp. 4565-4572
Author(s):  
Yongan Chen ◽  
Lei Cheng ◽  
Dan Yu ◽  
Jie Shen ◽  
Zhengrong Zhou ◽  
...  
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Release Rate ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Average Particle Size ◽  
Hepatoma Cells ◽  
Average Particle ◽  
Therapeutic Effects ◽  
Drug Release Rate

The objective of this study was to prepare doxorubicin-loaded EGF modified PEG-nanoparticles and evaluate its targeting capability and therapeutic effects with EGFR-expressing hepatocellular carcinoma cells. The morphology, particle size distribution, and doxorubicin content of the nanoparticles were measured, and the drug loading and encapsulation efficiency were calculated. The doxorubicin nanoparticles prepared were regular circular, with good dispersibility, no adhesion, and the average particle size was (136.7±9.3) nm. The average encapsulation efficiency was (76.67±8.63)%, the average drug loading was (3.86±0.55)%; the drug release rate of doxorubicin was 100% for 12 h, and the doxorubicin nanometer was loaded. The drug release rate of the granules was 52.9% at 24 h and 81.2% at 144 h. The inhibition rate of the proliferation of hepatocarcinoma cells by the doxorubicin-containing nanoparticles was slower than that of doxorubicin, and the IC50 of the two cells was 1.844 and 0.345 μg/mL, respectively. At the same time, apoptosis and cycle analysis showed that the doxorubicin nanoparticles could significantly inhibit the cell cycle of hepatoma cells and promote the apoptosis of hepatoma cells. This study successfully produced nanoparticles loaded with doxorubicin targeting EGFR, which has a good sustained release effect, and its antitumor effect is stronger than free doxorubicin.

Formulating SLN and NLC as Innovative Drug Delivery Systems for Non-Invasive Routes of Drug Administration

2020 ◽  
Vol 27 (22) ◽  
pp. 3623-3656 ◽  
Author(s):  
Bruno Fonseca-Santos ◽  
Patrícia Bento Silva ◽  
Roberta Balansin Rigon ◽  
Mariana Rillo Sato ◽  
Marlus Chorilli
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Drug Loading ◽  
Average Particle Size ◽  
Delivery Systems ◽  
Average Particle ◽  
Minor Importance ◽  
Routes Of Administration ◽  
Non Invasive

Colloidal carriers diverge depending on their composition, ability to incorporate drugs and applicability, but the common feature is the small average particle size. Among the carriers with the potential nanostructured drug delivery application there are SLN and NLC. These nanostructured systems consist of complex lipids and highly purified mixtures of glycerides having varying particle size. Also, these systems have shown physical stability, protection capacity of unstable drugs, release control ability, excellent tolerability, possibility of vectorization, and no reported production problems related to large-scale. Several production procedures can be applied to achieve high association efficiency between the bioactive and the carrier, depending on the physicochemical properties of both, as well as on the production procedure applied. The whole set of unique advantages such as enhanced drug loading capacity, prevention of drug expulsion, leads to more flexibility for modulation of drug release and makes Lipid-based nanocarriers (LNCs) versatile delivery system for various routes of administration. The route of administration has a significant impact on the therapeutic outcome of a drug. Thus, the non-invasive routes, which were of minor importance as parts of drug delivery in the past, have assumed added importance drugs, proteins, peptides and biopharmaceuticals drug delivery and these include nasal, buccal, vaginal and transdermal routes. The objective of this paper is to present the state of the art concerning the application of the lipid nanocarriers designated for non-invasive routes of administration. In this manner, this review presents an innovative technological platform to develop nanostructured delivery systems with great versatility of application in non-invasive routes of administration and targeting drug release.

scholarly journals Sodium Alginate Nanoparticles of Isoniazid: Preparation and Evaluation

2019 ◽  
Vol 11 (06) ◽  
Author(s):  
Sumit Kumar ◽  
Dinesh Chandra Bhatt
Keyword(s):  
Particle Size ◽  
Sodium Alginate ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Average Particle Size ◽  
Average Particle ◽  
In Vitro Drug Release ◽  
Ionotropic Gelation ◽  
Preparation And Evaluation

Fabrication and evaluation of the Isoniazid loaded sodium alginate nanoparticles (NPs) was main objective of current investigation. These NPs were engineered using ionotropic gelation technique. The NPs fabricated, were evaluated for average particle size, encapsulation efficiency, drug loading, and FTIR spectroscopy along with in vitro drug release. The particle size, drug loading and encapsulation efficiency of fabricated nanoparticles were ranging from 230.7 to 532.1 nm, 5.88% to 11.37% and 30.29% to 59.70% respectively. Amongst all batches studied formulation F-8 showed the best sustained release of drug at the end of 24 hours.

scholarly journals Nanoformulation Development to Improve the Biopharmaceutical Properties of Fisetin Using Design of Experiment Approach

Molecules ◽  
2021 ◽  
Vol 26 (10) ◽  
pp. 3031
Author(s):  
Wan-Yi Liu ◽  
Chia-Chen Lin ◽  
Yun-Shan Hsieh ◽  
Yu-Tse Wu
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Oral Delivery ◽  
Encapsulation Efficiency ◽  
Average Particle Size ◽  
Amorphous State ◽  
Polydispersity Index ◽  
Morphological Observation ◽  
Average Particle ◽  
Biopharmaceutical Properties

This study aimed to design an effective nanoparticle-based carrier for the oral delivery of fisetin (FST) with improved biopharmaceutical properties. FST-loaded nanoparticles were prepared with polyvinyl alcohol (PVA) and poly(lactic-co-glycolic acid) (PLGA) by the interfacial deposition method. A central composite design of two independent variables, the concentration of PVA and the amount of PLGA, was applied for the optimization of the preparative parameter. The responses, including average particle size, polydispersity index, encapsulation efficiency, and zeta potential, were assessed. The optimized formulation possessed a mean particle size of 187.9 nm, the polydispersity index of 0.121, encapsulation efficiency of 79.3%, and zeta potential of −29.2 mV. The morphological observation demonstrated a globular shape for particles. Differential scanning calorimetry and powder X-ray diffraction studies confirmed that the encapsulated FST was presented as the amorphous state. The dissolution test indicated a 3.06-fold increase for the accumulating concentrations, and the everted gut sac test showed a 4.9-fold gain for permeability at the duodenum region. In conclusion, the optimized FST-loaded nanoparticle formulation in this work can be developed as an efficient oral delivery system of FST to improve its biopharmaceutic properties.

scholarly journals Casein Micelles as Nanocarriers for Benzydamine Delivery

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4357
Author(s):  
Nikolay Zahariev ◽  
Maria Marudova ◽  
Sophia Milenkova ◽  
Yordanka Uzunova ◽  
Bissera Pilicheva
Keyword(s):  
Particle Size ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Average Particle Size ◽  
Crosslinking Agent ◽  
Morphological Characteristics ◽  
Average Particle ◽  
Scanning Calorimetry ◽  
Casein Micelles ◽  
Fourier Transformed Infrared Spectroscopy

The aim of the present work was to optimize the process parameters of the nano spray drying technique for the formulation of benzydamine-loaded casein nanoparticles and to investigate the effect of some process variables on the structural and morphological characteristics and release behavior. The obtained particles were characterized in terms of particle size and size distribution, surface morphology, production yield and encapsulation efficiency, drug-polymer compatibility, etc., using dynamic light scattering, scanning electron microscopy, differential scanning calorimetry, and Fourier transformed infrared spectroscopy. Production yields of the blank nanoparticles were significantly influenced by the concentration of both casein and the crosslinking agent. The formulated drug-loaded nanoparticles had an average particle size of 135.9 nm to 994.2 nm. Drug loading varied from 16.02% to 57.41% and the encapsulation efficiency was in the range 34.61% to 78.82%. Our study has demonstrated that all the investigated parameters depended greatly on the polymer/drug ratio and the drug release study confirmed the feasibility of the developed nanocarriers for prolonged delivery of benzydamine.

Mechanism of Hydrogen Sulfide Drug-Loaded Nanoparticles Promoting the Repair of Spinal Cord Injury in Rats Through Mammalian Target of Rapamycin/Signal Transducer and Activator of Transcription 3 Signaling Pathway

2021 ◽  
Vol 13 (9) ◽  
pp. 1691-1698
Author(s):  
Hongzhe Liu ◽  
Kai Tong ◽  
Ziyi Zhong ◽  
Gang Wang
Keyword(s):  
Spinal Cord ◽  
Spinal Cord Injury ◽  
Particle Size ◽  
Dispersion Coefficient ◽  
Drug Loading ◽  
Average Particle Size ◽  
Mammalian Target Of Rapamycin ◽  
Average Particle ◽  
Recovery Effect ◽  
Cord Injury

To explore the effect of hydrogen sulfide (H2S) drug-loaded nanoparticles (H2S-NPs) on the mTOR/STAT3 signaling pathway in rats and its mechanism on repair of spinal cord injury (SCI), a new H2S-NP (G16MPG-ADT) was prepared and synthesized. The rats were selected as the research objects to explore the mechanism of SCI repair. The G16MPG-ADT NPs were evaluated by average particle size (APS), dispersion coefficient (DC), drug loading content (DLC), drug loading efficacy (DLE), in vitro release (IV-R), and acute toxicity (AT). It was found that G16MPG-ADT nanoparticles had a uniform particle size distribution with a unimodal distribution, with an average particle size of 186.5 nm and a dispersion coefficient of 0.129; within the concentration range of 8~56 μg/L, there was a good linear relationship with the peak area; and the release rate of the nanoparticles within 16 h~32 h was higher than 50%. G16MPG-ADT NP injection treatment was performed on rats with SCI. Western blotting (WB) and immunofluorescence staining were adopted to analyze the expression levels of mammalian target of rapamycin (mTOR) and signal transducers and activators of transcription (STAT3) protein and the growth of neurites. It was found that G16MPG-ADT can increase mTOR and STAT3 protein levels and promote nerve growth after SCI. Finally, the Basso, Beattie and Bresnahan locomotor rating (BBB) score was to evaluate the recovery effect of rats after treatment. It was found that the recovery effect was excellent after G16MPG-ADT treatment. In summary, G16MPG-ADT has a good effect on SCI repair in rats and can be promoted in the clinic.

scholarly journals FORMULATION AND EVALUATION OF ETHAMBUTOL POLYMERIC NANOPARTICLES

2020 ◽  
pp. 207-217
Author(s):  
MONOWAR HUSSAIN ◽  
ANUPAM SARMA ◽  
SHEIKH SOFIUR RAHMAN ◽  
ABDUL MATIN SIDDIQUE ◽  
TANUKU PAVANI EESWARI
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Polymeric Nanoparticles ◽  
Release Kinetics ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Compatibility Study ◽  
Bacterial Disease ◽  
Dose Frequency

Objective: Tuberculosis (TB) is an infectious bacterial disease caused by Mycobacterium tuberculosis which most commonly affects the lungs. TB has the highest mortality rate than any other infectious disease occurs worldwide. The main objective of the present investigation was to develop polymeric nanoparticles based drug delivery system to sustain the ethambutol (ETB) release by reducing the dose frequency. Methods: The Preformulation studies of drug ETB were done by physical characterization, melting point determination, and UV spectrophotometric analysis. The ETB loaded nanoparticles were prepared by double-emulsion (W/O/W) solvent evaporation/diffusion technique. The prepared polymeric nanoparticles were evaluated for particle size, polydispersity index, zeta potential, drug entrapment efficiency, drug loading, drug-polymer compatibility study, surface morphology, in vitro drug release, and release kinetics. Results: Based on the result obtained from the prepared formulations, F11 showed the best result and was selected as the optimized formulation. Optimized batch (F11) showed better entrapment efficiency (73.3%), good drug loading capacity (13.21%), optimum particle size (136.1 nm), and zeta potential (25.2 mV) with % cumulative drug release of 79.08% at the end of 24 h. Conclusion: These results attributed that developed polymeric nanoparticles could be effective in sustaining the ETB release over 24 h. Moreover, the developed nanoparticles could be an alternate method for ETB delivery with a prolonged drug release profile and a better therapeutic effect can be achieved for the treatment of tuberculosis.

scholarly journals PREPARATION AND CHARACTERIZATION OF ORAL NANOSUSPENSION LOADED WITH CURCUMIN

2018 ◽  
Vol 10 (6) ◽  
pp. 90 ◽  
Author(s):  
Sneha Dekate Shreeram Hirlekar ◽  
Srinivas Bhairy ◽  
Srinivas Bhairy ◽  
Rajashree Hirlekar ◽  
Rajashree Hirlekar
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
High Speed ◽  
Drug Loading ◽  
Research Work ◽  
Release Kinetic ◽  
Pharmacokinetic Studies ◽  
Sprague Dawley ◽  
Saturation Solubility

Objective: The principle objective of the present research work was to improve the bioavailability of curcumin (CUR) by decreasing its particle size. Nanosuspension (NS) of CUR was prepared using poloxamer-188 (P188) as a surfactant. The prepared NSs were characterized for particle size, polydispersity index (PDI), zeta potential, drug loading, saturation solubility, and drug release kinetic studies.Methods: Components required for NS preparation, such as solvent, anti-solvent and surfactant were screened. Precipitation high-speed homogenization (HSH) method was used for the preparation of NS using selected components. Evaluation of NS for particle size, PDI, drug loading, saturation solubility and in vitro drug release was done. Pharmacokinetic studies of the NS in sprague dawley (SD) rats were performed.Results: The particle size, PDI and zeta potential of the optimized formulation was 596.5±5 nm, 0.233±0.010 and-23±2 mV respectively. The pH of all the formulations was in the range of 5-6 which is acceptable when related to drug stability. The optimized formulation showed an increase in saturation solubility in water and phosphate buffer pH 6.8 when compared to plain CUR suspension (S). Results of pharmacokinetic studies indicated that Cmax and AUC0-6 were increased 8 and 10 times respectively from plain CUR S to CUR NS.Conclusion: CUR NS was prepared using P188 as the stabilizer. Amongst various stabilizers screened P188 rendered a stable NS with the particle size in nano range. Pharmacokinetic studies revealed the better performance of CUR NS as compared to plain CUR S.

scholarly journals INVESTIGATION ON DISSOLUTION PATTERN AND MATHEMATICAL MODELING OF DRUG RELEASE OF QUERCETIN BY COMPLEXATION WITH CYCLODEXTRIN NANOSPONGES

2019 ◽  
pp. 260-264
Author(s):  
SOBITHARANI P ◽  
ANANDAM S ◽  
MOHAN VARMA M ◽  
VIJAYA RATNA J ◽  
SHAILAJA P
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Average Particle Size ◽  
Particle Size Analysis ◽  
Water Soluble ◽  
Size Analysis ◽  
Average Particle ◽  
Scattering Method ◽  
Release Pattern ◽  
Cyclodextrin Nanosponges

Objective: The main objective of this study was to investigate the release pattern of a poorly water-soluble drug quercetin (QU) by fabricating its cyclodextrin nanosponges. Methods: Characterization of the original QU powder and QU-loaded nanosponges was carried out by the Fourier-transformed infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), and dissolution tester. The drug release pattern was subjected to various kinetic models. Results: FTIR studies confirmed the formation of inclusion complex of drug. The particle size analysis revealed that the average particle size measured by laser light scattering method is around 400–420 nm with low polydispersity index. The particle size distribution is unimodal and having a narrow range. A sufficiently high zeta potential indicates that the complexes would be stable and the tendency to agglomerate would be miniscule. TEM image revealed the porous nature of nanosponges. The dissolution of the QU nanosponges was significantly higher compared with the pure drug. Conclusion: From the kinetic study, it is apparent that the regression coefficient value closer to unity in case of Korsmeyer-Peppas model indicates that the drug release exponentially to the elapsed time. n value obtained from the Korsmeyer-Peppas plots, i.e., 0.9911 indicating non-Fickian (anomalous) transport ; thus, it projected that delivered its active ingredient by coupled diffusion and erosion.

scholarly journals Development and Evaluation of Floating Microspheres of Sumatriptan Succinate using Ethyl Cellulose and Mucilage Extracted from Vigna Mungo

2021 ◽  
pp. 24-36
Author(s):  
Nilesh S. Kulkarni ◽  
Mukta A. Kulkarni ◽  
Rahul H. Khiste ◽  
Mohini C. Upadhye ◽  
Shashikant N. Dhole
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Ethyl Cellulose ◽  
Polymer Concentration ◽  
Average Particle Size ◽  
Entrapment Efficiency ◽  
Vigna Mungo ◽  
Average Particle ◽  
Sumatriptan Succinate

Aim: The present investigation is to formulate and evaluate gastroretentive floating microspheres for sumatriptan succinate. Gastric retention is widely used approach to retain dosage form in stomach and to enhance absorption of drugs. Methods: The gastroretentive floating microspheres was prepared by two different techniques as solvent evaporation and W/O/W multiple emulsion technique. Ethyl cellulose, HPMC K4M polymer and mucilage extracted from Vigna Mungo in various proportions were used for formulation of microspheres. Combination of ethyl acetate and acetone in different proportion was used as organic phase and the microspheres were characterized for particle size, shape, morphology, percentage yield, entrapment efficiency, drug loading, In-Vitro Floating/Buoyancy study, In-vitro Floating/Buoyancy study and release kinetics. Results: The average particle size of all batches was found in the range 100 to 210 μm and the entrapment efficiency of all formulations was found in the range of 17.46 % to 59.28 %.Total floating time for Sumatriptan succinate floating microspheres was observed more than 12 h. The In-Vitro drug release study was performed for all formulations showed drug release in controlled manner. Conclusion: The particle size was increased with increased polymer concentration and it showed that polymer concentration has an impact on the entrapment efficiency. Ethyl cellulose microspheres showed more entrapment and sustained delivery of sumatriptan Succinate than microspheres prepared by combination of Ethyl cellulose: HPMC K4M and Ethyl cellulose: Vigna mungo mucilage.

Sign in / Sign up

Export Citation Format

Share Document