scholarly journals High Cod and Turbidity Removal in The Treatment of Polluted Pond Water Using Low Dosage of Pineapple Leaf Coagulant: A Preliminary Study

2021 ◽  
Vol 11 (4) ◽  
pp. 42-49
Author(s):  
Rafidah Husen ◽  
Juferi Idris ◽  
Nur Diana Wakimin ◽  
Jimmy Mijim ◽  
Lovelyna Eva Sunta ak Michael Luncha ◽  
...  

Coagulation process using low dosage of plant-based coagulant to remove high chemical oxygen demand (COD) and turbidity is important for water treatment. This study presents the treatment of pond water using plant-based pineapple leaf coagulant to achieve high COD and turbidity removal. The coagulation was performed using a jar test experiment of pond water at different pH followed by different dosages of pineapple leaf coagulant. It was found that the highest COD and turbidity removal ranged between 94.1 – 94.6 % and 88.3 – 88.4 % at pH 8 respectively, using low dosage (50 mg L-1) of pineapple leaf coagulant. The final COD and turbidity values ranged between 7.3 – 8.0 mg L-1 and 17.7 – 17.8 formazin turbidity unit (FTU) respectively, which are lower compared with results from other studies that used high dosage coagulants. Moreover, the final pH, COD, turbidity, dissolved oxygen (DO), and total suspended solid (TSS) values of the treated pond water were below the standard limits set by the National Water Quality Standards for Malaysia (NWQSM) class IIB, which represents water bodies suitable for recreational use with body contact (DOE, 2016). Therefore, it is expected that the newly-formulated waste utilisation of pineapple leaf coagulant can reduce the usage of chemical coagulants and can further be used for different types of water.

2016 ◽  
Vol 15 (4) ◽  
pp. 49-53
Author(s):  
Sumona S Das ◽  
D Sayantan

Pure water is essential for human survival. The availability of good quality water is an indispensable feature for preventing diseases and improving the quality of life. So, it is necessary to know about the different physicochemical parameters of water such as, temperature, electrical conductivity (EC), total suspended solid (TSS), total dissolved substance (TDS),turbidity, pH, alkalinity, hardness, chloride, sulphate, nitrate, fluoride, dissolved oxygen (DO), chemical oxygen demand (COD), biochemical oxygen demand (BOD), nitrate and phosphate. Also Biological parameters such as planktons were examined. Results of the study indicated that the pond water of Bihar is slightly contaminated.


WARTA AKAB ◽  
2021 ◽  
Vol 45 (2) ◽  
Author(s):  
Ahmad Zakaria ◽  
Sopian Sauri ◽  
Dian Mira Fadela ◽  
Puspita Sri Ayu Wardhani

Industri pangan menghasilkan air limbah berbahan organik dan padatan tersuspensi maupun terlarut yang tinggi. Salah satu proses pengolahan air limbah yaitu dengan proses koagulasi-flokulasi yang bertujuan untuk menghilangkan padatan tersuspensi dan zat organik yang dapat menyebabkan kekeruhan serta bau dengan penambahan koagulan. Penambahan koagulan pada instalasi pengolahan air limbah (IPAL) tidak dilakukan secara kuantitatif, sehingga perlu dilakukan percobaan dengan metode jar test. Tujuan percobaan untuk mengetahui pH dan dosis optimum serta efisiensi koagulan poly aluminium chloride (PAC) untuk menurunkan kadar chemical oxygen demand (COD), total suspended solid (TSS), dan total dissolved solid (TDS). Hasil uji parameter COD, TSS, dan TDS dibandingkan dengan Surat Keputusan Gubernur Tingkat 1 Jawa Barat (SK Gub TK 1 Jabar) No. 6 Tahun 1999 tentang Baku Mutu Limbah Cair Bagi Kegiatan Industri di Jawa Barat. Berdasarkan hasil percobaan diperoleh kondisi optimum koagulan PAC pada pH air limbah 6–7 dengan dosis koagulan optimum pada (80–90) mg/L. Hasil pengujian parameter TS, TDS, TSS, kekeruhan dan COD berturut-turut memberikan nilai efisiensi sebesar (52,6-57,8)%, (53,9-55,5)%, (52,4-58,1)%, (97,8-99,1)%, dan (71,6–77,1)%. Percobaan yang dilakukan membuktikan bahwa koagulan PAC mampu menurunkan kadar pada parameter uji dengan nilai efisiensi yang cukup besar.


Considering techno-financial oblige, cassava peel (CP) that is effectively accessible mechanical waste is concentrated to assess its appropriateness to be chosen as coagulant help for the water treatment framework. The process called coagulation and flocculation is the generation of consumable water from most raw water sources generally incorporates. The most well-known coagulant used in water treatment are aluminium salts, ferric salts and synthetic polymers. These coagulants are frequently costly and can hardly afford the costs of imported chemicals. Considering techno-economic constrain, cassava peel (CP) that is effectively accessible industrial waste is concentrated to assess its appropriateness to be chosen as coagulant aid for water treatment system. This aim for characterize cassava peel and to optimize coagulation and flocculation process using alum, CPS and alum : CPS. There are two types of equipment analysis involve to characterization the cassava peel namely scanning electron microscope (SEM-EDX) equipped with energy dispersive X-ray spectrometer (EDX) and X-ray fluorescence (XRF) spectrometry. SEM-EDX micrograph had shown that the surface of the cassava peel samples was secured with smooth and globular in formed of bound a starch granule. The CP samples contain Fe2O 3 and Al2O 3 were analysis by XRF spectrometry indicated that which might contribute to its coagulation ability. The water samples used was collected at the water intake from Sembrong Dam. The raw water sample was characterized before the process of jar test. Jar test experiment was carried out by using alum, cassava peel starch and cassava peel + alum. The laboratory analysis was carried on turbidity, total suspended solid and COD removal. Recommended conditions (initial pH 9, 70 : 30 % of alum : CPS, and 60 min settling time) allowed Cassava peel and alum removed high turbidity, total suspended solid and chemical oxygen demand up to 90.32%, 89.86% and 18.87%, respectively. The effectiveness of cassava peel as coagulant aid was investigated from floc analysis. Besides that, based on the results with using SEM analysis, the images showed that the combination of alum +CPS was more compact and this can make denser because of the bridging of the particles that easy the floc to settle down. This study proved the use of natural coagulant from cassava peel as an alternative coagulant aid to reduce the usage of chemical coagulants.


2020 ◽  
Vol 15 (3) ◽  
pp. 70-77
Author(s):  
J.D Bala ◽  
F. A Kuta ◽  
N.U Adabara ◽  
O.P Abioye ◽  
H.S Auta ◽  
...  

Water used for washing carcasses of slaughtered animals and slaughter house is referred to as abattoir wastewater. This study was designed to investigate the microorganisms associated with abattoir wastewater and to establish the biodegradation potential of abattoir wastewater microbiota. Isolation of the microbes was carried out using pour plate technique. The total viable count for the microbes’ ranges from 2.5×104 - 4.6×105 cfu/mL. Results revealed that all the physicochemical parameters exceeded the permissible limits (total dissolved solid (TDS) 1748mg/L, total suspended solid (TSS) 176mg/L, biochemical oxygen demand (BOD5) 91 mg/L and chemical oxygen demand (COD) 227 mg/L). Microorganisms isolated include Staphylococcus aureus, Pseudomonas aeruginosa, Bacillus subtilis, Bacillus anthracis, Aspergillus niger, A. flavus, Mucor sp, Trichophyton quickeanum and Penicillium sp. Some of the microbes were observed to have biodegradation potential by their ability to grow on mineral salt media (MSM) incorporated with starch, cellulose, crude oil, kerosene and diesel as the sole source of carbon and energy. This study suggests that abattoir wastewater harbors microorganisms that could be hazardous to public health when discharged into the environment untreated hence the need for strict monitoring. These microbes isolated could be employed as agent of bioremediation of wastewaters. Key words: Abattoir; Biodegredation; Isolation; Microbiota; Wastewater


Jurnal Ecolab ◽  
2021 ◽  
Vol 15 (2) ◽  
pp. 101-109
Author(s):  
Dewi Ratnaningsih ◽  
◽  
Retno Puji Lestari ◽  
Ernawita Nazir

Kualitas air di suatu wilayah yang merupakan salah satu indikator lingkungan dapat dievaluasi menggunakan parameter fisika, kimia, dan biologi. Indeks Kualitas Air Indonesia (IKA-INA) dapat digunakan untuk menilai kondisi kualitas air secara menyeluruh pada lokasi dan waktu tertentu. IKA-INA dihitung dengan menggunakan sepuluh (10) parameter yaitu pH, Total Dissolved Solid (TDS), Total Suspended Solid (TSS), Dissolved Oxygen (DO), Biological Oxygen Demand (BOD), Chemical Oxygen Demand (COD), NO3, NH3, Total Phosphate (TP) dan fecal coliform. IKA-INA tersebut merupakan indeks kualitas air yang dapat memberikan informasi secara sederhana. Dalam pemanfaatannya, tidak semua data parameter dalam IKA-INA tersebut dapat terpenuhi karena adanya data tidak valid atau data yang hilang. Kajian ini bertujuan untuk memberi alternatif rumusan IKA-INA dengan parameter yang tidak lengkap atau jika tidak semua data dalam parameters tersebut tersedia. Metode yang digunakan dalam menyusun rumusan adalah dengan melakukan koreksi faktor bobot parameter IKA-INA terhadap parameter yang hilang dan nilai Q (nilai sub-indeks). Setelah itu dilakukan uji coba pada nilai baku mutu air dalam Peraturan Pemerintah No. 22/2021 Lampiran VI serta pada data kualitas air sungai yang mewakili kualitas baik dan buruk. Hasil uji coba menunjukkan bahwa bobot parameter terkoreksi dapat digunakan untuk penanganan parameter yang hilang dalam penilaian kualitas air dengan metode IKA-INA. Hasil IKA-INA dengan parameter hilang yang menggunakan bobot terkoreksi dan hasil IKA-INA dengan parameter lengkap mayoritas memberikan status IKA yang tidak berbeda, kecuali untuk parameter fecal coli dan parameter yang mempunyai kadar jauh berbeda terhadap kondisi air secara keseluruhan.


2018 ◽  
Vol 67 ◽  
pp. 04006 ◽  
Author(s):  
Irfan Aditya ◽  
Sutrasno Kartohardjono

Wastewater generated from the tofu industry usually still contains high organic pollutants that can contaminate the surface water. Therefore, it should be treated properly before it can be disposed to the environment. This study aims to evaluate the combination of coagulationflocculation and ultrafiltration methods in treating the wastewater from tofu industry. Based on the preliminary tests, the wastewater from tofu industry have pH, total dissolved solid (TDS), total suspended solid (TSS), turbidity and chemical oxygen demand (COD) of 3.4, 870 - 1080 mg/L, 370 mg/L, 446 FAU and 7954 mg/L, respectively. The coagulant and membrane used in this study were Poly aluminum chloride (PAC) and the ceramic membrane, respectively. Experimental results showed that the best pH for coagulation-flocculation process is at pH of 7.0, and this pH was then used for ultrafiltration process. The flux of the ultrafiltration membrane increased with increasing the trans membrane pressure due to increasing driving force. The observed parameters such as TSS and turbidity of wastewater decreased drastically after experiencing ultrafiltration process and met the National Environmental Quality Standard. However, the COD of water produced in the ultrafiltration process was still high and did not meet the National Environmental Quality Standard.


2020 ◽  
Vol 32 (4) ◽  
pp. 827-834
Author(s):  
Muhammad Towhid Moula ◽  
Ranjit K. Nath ◽  
Mh. Mosfeka Chowdhury ◽  
Md. Abu Bakar Siddique

Halda is an important river of Bangladesh, is now polluted in different ways through industrial, agricultural, domestic and sewage disposal. Increased anthropogenic activities have increased the potential pollution of the river and excessive pollutants may be toxic to humans and aquatic fauna. Presence of heavy metals in the river water causes perilous impact on the aquatic organisms. Hence, regular monitoring of pollution levels in the river is indispensable. In this study, we discuss about physico-chemical assessments of water quality parameters viz. pH, dissolve oxygen (DO), biochemical oxygen demand (BOD), chemical oxygen demand (COD), total solid (TS), total suspended solid (TSS), total dissolved substance (TDS), total alkalinity, turbidity, salinity, electrical conductivity (EC), hardness, chloride and heavy metals in the water of Halda river during rainy and winter seasons, at different points; sources of pollutants in water and their effects given starting from the early research until the current research.


2012 ◽  
Vol 610-613 ◽  
pp. 363-367
Author(s):  
Tipakorn Suwannarat ◽  
Nipon Pisutpaisal ◽  
Siriorn Boonyawanich

The purpose of current study was to examine the ability of electrocoagulation in decreasing chemical oxygen demand (COD) and total suspended solid (TSS) constituted in palm oil mill effluent. Bench-scale batch reactor containing two aluminum or steel plates (10 cm width × 30 cm height with 0.1 cm thickness) serving as electrodes with the interval distance of 3 cm was set up. The wastewater with COD concentration of 68,425 mg L-1 was treated in the reactor under the varied direct currents (0.3-1.3 A) and contact time (30-120 min). Sodium chloride was added to the wastewater to obtain the final concentration of 2 g L-1 (conductivity of 10 ms) prior to being fed into the reactor. The results showed that higher treatment efficiency when the aluminum was used as electrodes compared to the steel. COD removal efficiency was directly proportional to the contact time. The maximum COD and TSS removal observed at 1.3 A current input and 60 min contact time are 74.1 and 77.0%, respectively.


2020 ◽  
Vol 997 ◽  
pp. 139-149
Author(s):  
Yong Yin Sia ◽  
Ivy Ai Wei Tan ◽  
Mohammad Omar Abdullah

Palm oil processing is a multi-stage operation which generates large amount of palm oil mill effluent (POME). Due to its potential to cause environmental pollution, POME must be treated prior to discharge. Electrocoagulation (EC), adsorption (AD), combined EC and AD, and EC integrated with AD have demonstrated great potential to remove various organic and inorganic pollutants from wastewater. Up to date, no study has been found on POME treatment using EC-AD hybrid process. Therefore, this study aims to investigate the feasibility of applying EC-AD hybrid process as an alternative treatment for POME. The EC-AD hybrid process achieved higher removal of total suspended solid (TSS), chemical oxygen demand (COD) and colour as compared to EC and AD stand-alone processes. The EC-AD hybrid process reduced 79% of TSS, 44% of COD and 89% of colour from POME. The adsorption kinetics of TSS, COD and colour were best interpreted using pseudo-second-order model, which indicated that the adsorption rate was mainly controlled by chemisorption. Overall, the EC-AD hybrid process could be recommended as an alternative treatment for POME.


Sign in / Sign up

Export Citation Format

Share Document