scholarly journals Heavy metals in some moss species found around Camlihemsin district of Rize, Turkey

2017 ◽  
Vol 7 (1) ◽  
pp. 36-39
Author(s):  
Nilay Akcay ◽  
Nevzat Batan ◽  
Yunus Cinar
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Environmental Safety ◽  
Quantitative Information ◽  
Energy Dispersive ◽  
Moss Species ◽  
X Ray ◽  
Metal Levels ◽  
Surrounding Areas ◽  
Cu And Zn

Abstract In recent years, environmental safety associated with heavy metal levels of a tourism area and its surrounding areas has been one of the basic security for tourists health. Various methods have been used for measuring concentrations of heavy metal levels in these areas. Biomonitoring organisms such as mosses provide quantitative information on the quality of the environment around them, and they respond to pollution by altering their physiology or their ability to accumulate heavy metals. The aim of this study is to assess  the concentration of aluminum, manganese, iron, nickel, copper, and zinc levels in five different moss species collected around Camlihemsin district of Rize, by using Energy Dispersive X-ray Fluorescence (EDXRF) Spectrometry. The average concentrations of heavy metals in moss samples were found ranged from 3.8-8.3% for aluminum, 0.1-0.47% for manganese, 2.3-3.8% for iron, 38.8-74.2 ppm for nickel, 92.1-495.3 ppm for copper, 187.3-334 ppm for zinc. This study has shown that Abietinella abietina, Hypnum cupressiforme, Plagiomnium undulate, Rhytidium rugosum, and Thuidium tamariscinum samples were used to assess the potential contamination of Al, Mn, Fe, Ni, Cu, and Zn contamination in the region and made important contributions toward the understanding of Al, Mn, Fe, Ni, Cu, and Zn baseline data can be used for identification of changes in the levels of these heavy metals in the studied area. Keywords: Energy Dispersive X-ray Fluorescence (EDXRF) Spectrometry, heavy metals, moss, biomonitor, environment.  

scholarly journals Assessment of Cd, Hg, Pb, Cu and Zn Amounts in Muscles of Cyprinus Carpio from Karasu Stream, Sinop

2019 ◽  
Vol 7 (2) ◽  
pp. 171-180 ◽  
Author(s):  
Levent Bat ◽  
Fatih Şahin ◽  
Ayşah Öztekin ◽  
Elif Arici ◽  
Öztekin Yardim
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Cyprinus Carpio ◽  
Inductively Coupled Plasma ◽  
Hazard Quotient ◽  
Target Hazard Quotient ◽  
Accumulation Pattern ◽  
Inductively Coupled ◽  
Metal Levels ◽  
Cu And Zn

Heavy metal contaminations in aquatic habitats effect negatively on the organisms that depend on the water. In this work heavy metal levels in edible tissues of Cyprinus carpio from Karasu Stream in Sinop in summer, autumn and winter were determined by Inductively Coupled Plasma Mass Spectrometer. The accumulation pattern in the work is in the order of Zn>Cu>Pb>Cd> Hg. The amounts of Hg, Cd, Pb, Cu and Zn in carps were 0.022-0.036, 0.031-0.045, 0.22-0.29, 1.32-1.61 and 8.4-12.3 mg kg-1 wet wt., respectively. Concentrations of heavy metals in C. carpio were all below the TFC and EC guidelines. Total target hazard quotient (TTHQ) was 0.10722 and below 1 which showed that consumption of carp from the Karasu Stream has no health threats by now as the heavy metals investigated was concerned.

scholarly journals Assessment of Heavy Metals in Beans (Vigna unguiculata) Obtained from Oja-Tuntun Market, Ile-Ife, Osun State, Nigeria

2020 ◽  
pp. 23-27
Author(s):  
K. T. Ogundele ◽  
O. W. Makinde ◽  
M. Eluyera ◽  
Y. C. Orisamoyi
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Food Safety ◽  
Human Exposure ◽  
Developing Nations ◽  
Limit Set ◽  
Human Diet ◽  
X Ray ◽  
Metal Levels ◽  
The World

Beans play a significant role in human diet especially in developing nations like Nigeria, the largest producer and consumer of beans in the world. To ensure food safety, heavy metal levels need to be monitored on regular basis to control human exposure through dietary intake. This study aimed at assessing the levels of heavy metals in some species of beans available in Ife market, Osun State, Nigeria. Samples of each species of beans were bought and analyzed for heavy metals using X-ray Fluorescence spectroscopy. Results showed that the concentration of heavy metals such as Cu was present at a level ranging from 0.131–0.205 ppm, and Zn was present at level ranging from 0.073–0.182 ppm. Cd was present at concentration < 0.039 ppm. Cu, Zn and Cd levels in natural beans sample were observably below maximum permissible limit set by WHO in Table 2. Therefore, it can be concluded that majority of these beans species were not contaminated with the studied heavy metals, hence pose no immediate health risk to human.

HEAVY METALS IN WATER, SEDIMENTS AND MARINE FISHES FROM BULGARIAN BLACK SEA

2017 ◽  
Author(s):  
Katya Peycheva ◽  
Katya Peycheva ◽  
Mona Stancheva ◽  
Mona Stancheva ◽  
Stanislava Georgieva ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Black Sea ◽  
Fish Species ◽  
Distribution Patterns ◽  
Marine Fishes ◽  
Marine Water ◽  
Mean Values ◽  
Sprattus Sprattus ◽  
Cu And Zn

In this study, the ecosystem marine water-sediment-biota was investigated and the pollution was assessed. The concentrations of eight elements were determined in marine water, sediments and four fish species collected from Black Sea (Varna), Bulgaria during 2013. Marine water recorded the highest concentrations of Zn (15-22 μg/L), As (1.1–1.2 μg/L) and Pb (0.7-0.8 μg/L) while Zn (31-52 μg/g), Pb (21-29 μg/g) and Cu (20-34 μg/g) and show the highest concentrations in sediments. Water and sediments showed similar spatial distribution patterns for the highest mean values of the different metals. In the analysed fish species, the highest concentration of the metals Cu and Zn were found in Trachurus Mediterrneus (0.42 mg/kg w.w) and in Sprattus Sprattus (12.7 mg/kg w.w), respectively while the heavy metals As and Hg were found with maximum values in Pseta Maxima (3.99 mg/kg w.w and 0.08 mg/kg w.w respectively). The results from this study were compared with our data for a previous period (2004-2006) and they show decrease in the levels of heavy metal.

scholarly journals Combined Influence of Low-Grade Metakaolins and Natural Zeolite on Compressive Strength and Heavy Metal Adsorption of Geopolymers

Minerals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 486
Author(s):  
Alcina Johnson Sudagar ◽  
Slávka Andrejkovičová ◽  
Fernando Rocha ◽  
Carla Patinha ◽  
Maria R. Soares ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Compressive Strength ◽  
Natural Zeolite ◽  
Metal Adsorption ◽  
Low Grade ◽  
Heavy Metal Adsorption ◽  
Adsorption Model ◽  
X Ray ◽  
Adsorption Capacities

Metakaolins (MKs) prepared from low-grade kaolins located in the Alvarães (A) and Barqueiros (B) regions of Portugal were used as the aluminosilicate source to compare their effect on the compressive strength and heavy metal adsorption of geopolymers. Natural zeolite, an inexpensive, efficient adsorbent, was used as an additive in formulations to enhance geopolymers’ adsorption capacities and reduce MK utilization’s environmental footprint. Geopolymers were synthesized with the replacement of MK by zeolite up to 75 wt.% (A25, B25—25% MK 75% zeolite; A50, B50—50% MK 50% zeolite; A75, B75—75% MK 25% zeolite; A100, B100—100% MK). The molar ratios of SiO2/Al2O3 and Na2O/Al2O3 were kept at 1 to reduce the sodium silicate and sodium hydroxide environmental impact. Geopolymers’ crystallography was identified using X-ray diffraction analysis. The surface morphology was observed by scanning electron microscopy to understand the effect of zeolite incorporation. Chemical analysis using X-ray fluorescence spectroscopy and energy dispersive X-ray spectroscopy yielded information about the geopolymers’ Si/Al ratio. Compressive strength values of geopolymers obtained after 1, 14, and 28 days of curing indicate high strengths of geopolymers with 100% MK (A100—15.4 MPa; B100—32.46 MPa). Therefore, zeolite did not aid in the improvement of the compressive strength of both MK-based geopolymers. The heavy metal (Cd2+, Cr3+, Cu2+, Pb2+, and Zn2+) adsorption tests exhibit relatively higher adsorption capacities of Barqueiros MK-based geopolymers for all the heavy metals except Cd2+. Moreover, zeolite positively influenced divalent cations’ adsorption on the geopolymers produced from Barqueiros MK as B75 exhibits the highest adsorption capacities, but such an influence is not observed for Alvarães MK-based geopolymers. The general trend of adsorption of the heavy metals of both MK-based geopolymers is Pb2+ > Cd2+ > Cu2+ > Zn2+ > Cr3+ when fitted by the Langmuir isotherm adsorption model. The MK and zeolite characteristics influence geopolymers’ structure, strength, and adsorption capacities.

scholarly journals Heavy metal levels in cattle egrets (Bubulcus ibis) foraging in some abattoirs in Lagos State metropolis

2021 ◽  
Vol 45 (1) ◽  
Author(s):  
Elijah Abakpa Adegbe ◽  
Oluwaseyi Oluwabukola Babajide ◽  
Lois Riyo Maina ◽  
Shola Elijah Adeniji
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Accumulation ◽  
Heavy Metal Contamination ◽  
Heavy Metal Accumulation ◽  
Bubulcus Ibis ◽  
Significant Difference ◽  
Metal Levels ◽  
Lagos State ◽  
The Mean

Abstract Background Heavy metal accumulation in the ecosystem constitutes a potential toxic effect which is hazardous to human health. Increasing environmental pollution has necessitated the use of cattle egrets to evaluate the levels of heavy metal contamination, to establish their use in biomonitoring of heavy metals and to provide data for monitoring pollution in the environment. Results The present study assessed the utilization of Bubulcus ibis in monitoring pollution in five abattoirs, namely Agege, Bariga, Kara, Itire and Idi-Araba, all situated in Lagos State. The concentration of five (5) heavy metals, cadmium (Cd), copper (Cu), nickel (Ni), lead (Pb) and zinc (Zn) was determined in the liver, muscle and feather of Bubulcus ibis using the atomic absorption spectrophotometer. The trend of metal accumulation was in the order: Zn > Cu > Pb > Cd > Ni for all the sampled tissues. The mean tissue concentrations of the metals were significantly different (p < 0.05) among the sites. The highest levels of metal concentration were reported in the liver in all the locations. Mean concentration of Cd in Kara (0.003 ± 0.00058) was significantly (p < 0.05) higher than those found at Agege (0.0013 ± 0.00058) and Idi-Araba (0.001 ± 0.001). A significant difference (p < 0.05) was also observed between the mean concentrations of Cu in Bariga (0.01 ± 0.001) and Idi-Araba (0.003 ± 0.001). Conclusion All the studied heavy metals were present in the liver, muscle and feathers of the cattle egrets. The contamination levels were ascertained from the study which indicated that cattle egrets are useful in biomonitoring studies and the generated data will serve as baseline data which could be compared with data from other locations for monitoring heavy metal pollution.

scholarly journals In vivo and in vitro studies on heavy metal tolerance in Sesbania grandiflora L

2009 ◽  
Vol 3 (2) ◽  
pp. 48-64
Author(s):  
Kadhim M. Ibrahim ◽  
Shaimaa A. Yousir
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Tolerance ◽  
Heavy Metal Tolerance ◽  
Heavy Metal Concentration ◽  
Callus Cultures ◽  
Metal Levels ◽  
Whole Plants

Several experiments were carried out to study heavy metal tolerance in tissue cultures or whole plants of S. grandiflora., Callus was induced and maintained on modified Murashige and Skoog, 1962 medium (MS) supplemented with (0.5)mg/l benzyl adenine and (2)mg/l 2,4-phenoxy acetic acid . Heavy metals (Cd, Co, Cu, Cr or Zn) were added to the culture medium at different concentrations as contamination agents. In order to asses the effect of these heavy metals on seed germination; seeds were sown in soil contaminated with different concentrations of heavy metals for 3 weeks. Atomic Absorption Spectrophotometer was used for analysis of samples taken from whole plants and callus cultures. Results showed that callus fresh weight decreased with increasing heavy metal concentration in cultural medium. Germination percentages and plant heights increased over time. However, a reduction occurred in these parameters with increasing heavy metal levels. Percentages of metals accumulated in calli were (0.001, 0.011, 0.012 and 0.013%) at (0.0, 0.05, 0.075 and 0.1)mg/l Cd respectively; (0.001, 0.008, 0.016 and 0.006%) at (0.0, 0.1, 0.25 and 0.5)mg/l Co respectively; (0.001, 0.020, 0.034 and 0.015%) at (0.0, 0.075, 0.2 and 0.5)mg/l Cu respectively; (0.001, 0.013, 0.012 and 0.010%) at (0.0, 0.25, 0.4 and 0.5)mg/l Cr respectively and (0.027, 0.051, 0.059 and 0.056%) at (0.0 , 0.75, 1.0 and 1.5)mg/l Zn respectively. Percentages of metals accumulated in whole plants were (0.08, 0.55, 1.11, 0.83 and 0.44%) at (0.0, 1.0, 2.0, 3.0 and 4.0)mg/Kg soil Cd respectively; (0.11, 0.22, 0.55, 0.47 and 0.44%) at (0.0, 15.0, 30.0 45.0 and 60.0)mg/Kg soil Co respectively; (0.01, 0.10, 0.57, 0.58 and 0.72%) at (0.0, 25.0, 50.0, 75.0 and 100.0)mg/Kg soil Cu respectively. (0.08, 0.80, 1.28, 1.31 and 0.88%) at (0.0, 25.0, 50.0, 75.0 and 100.0)mg/Kg soil Cr respectively and (0.06, 1.11, 1.20, 1.83 and 2.22%) at (0.0, 100.0, 200.0, 300.0 and 400.0)mg/Kg soil Zn respectively.

scholarly journals Heavy metal levels in drinking water sources of Chingola District, Zambia

2020 ◽  
Author(s):  
Francis Hamwiinga ◽  
Chisala D. Meki ◽  
Patricia Mubita ◽  
Hikabasa Halwiindi
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Drinking Water ◽  
Ground Water ◽  
Water Samples ◽  
Tap Water ◽  
Water Sources ◽  
Wet Season ◽  
Drinking Water Sources ◽  
Metal Levels

Abstract Background: One of the factors impeding access to safe water is water pollution. Of particular concern is heavy metal contamination of water bodies. This study was aimed at determining the levels of heavy metals in drinking water sources of Chingola District of Zambia. Methods: A cross sectional study was employed. A total of 60 water samples were collected. Thirsty (30) samples were collected in the dry season in the month of October 2016 and another 30 in the wet season in the months of February and March, 2017. For each season 10 water samples were collected from each of the three water sources. i.e. Tap water, Urban ground water sources and Rural ground water sources. Heavy metal analysis was done using Atomic Absorption Spectrophotometer (AAS).Results: This study revealed that the concentrations of Iron, Manganese, Lead, Nickel and Arsenic were beyond maximum permissible levels in various water sources. Combined averages for both dry and wet seasons were as follows: Iron: 2.3, Copper: 0.63, Cobalt: 0.02, Manganese: 0.36, Lead: 0.04, Zinc:3.2, Nickel: 0.03, Arsenic: 0.05. Chromium and Cadmium were below detection limit in all water samples. The median concentrations of iron, arsenic, copper, manganese in drinking water from the Tap, rural and urban ground water sources were different, and this difference was statistically significant (p<0.05). The median concentrations of arsenic, nickel, manganese and cobalt were different between dry and wet season, and this difference was statistically significant (p<0.05).Conclusions: Sources of heavy metals in water seems to be both natural and from human activities. The concentration of heavy metals in different water sources in this study was found to be above the recommended levels. This calls for improvement in water monitoring to protect the health of the public. Therefore, there is need for continuous monitoring of heavy metals in drinking water sources by regulatory authorities.

scholarly journals Keban Baraj Gölü Örencik Mevkiinden (Elazığ) Yakalanan Capoeta trutta’nın Kas Dokusundaki Bazı Ağır Metal Düzeylerinin Karşılaştırılması

2021 ◽  
Vol 9 (7) ◽  
pp. 1250-1257
Author(s):  
Özgür Canpolat ◽  
Metin Çalta
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Muscle Tissue ◽  
Fish Species ◽  
Human Consumption ◽  
Potential Health ◽  
Fish Samples ◽  
Metal Levels ◽  
Biological Aspects ◽  
The Relationship

Keban Dam Lake is the second largest dam lake in Turkey. In addition, it has the feature of being one of the most important dam lakes in our country in terms of both aquaculture potential and electricity generation. In this study, fish samples belong to Capoeta trutta caught from Örencik region of Keban Dam Lake were used. The concentrations of some heavy metals (copper, iron, zinc, chromium, nickel, cadmium, arsenic and mercury) in muscle of Capoeta trutta and the potential health risk from consumption of this fish species were examined. In addidion, the relationship between the heavy metal levels and some biological aspects of fish (weight, length and sex) were determined. As a result of the study, it was determined that the most and the least accumulated heavy metals in the muscle tissue of Capoeta trutta were zinc and cadmium respectively. The concentration of heavy metals showed differences according to weight, length and sex of fish. The results were found indicated that heavy metal levels in the muscle tissue of Capoeta trutta are below the tolerable values recommended by EPA, WHO and FAO. Therefore, there is not any risk for human consumption of this fish species.

scholarly journals Health Risk Assessment of Heavy Metals in Traditional Cosmetics Sold in Tunisian Local Markets

2016 ◽  
Vol 2016 ◽  
pp. 1-12 ◽  
Author(s):  
Mohamed Anouar Nouioui ◽  
Salah Mahjoubi ◽  
Asma Ghorbel ◽  
Marouen Ben Haj Yahia ◽  
Dorra Amira ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Risk Assessment ◽  
Heavy Metal ◽  
Health Risk ◽  
Atomic Absorption ◽  
Good Manufacturing Practice ◽  
Potential Threat ◽  
Analytical Test ◽  
Metal Contents ◽  
Cu And Zn

This study was undertaken in order to determine heavy metal contents in twelve (n=12) henna brands and eleven (n=11) kohl products. An analytical test was performed for Pb, Cd, Cu, and Zn in henna and kohl products using atomic absorption spectrophotometery. The overall mean concentrations of heavy metals in henna varied between 1.2 and 8.9 μg g−1 for Pb; 0.8 and 18.6 μg g−1 for Cd; 0.5 μg g−1 and 3.3 μg g−1 for Cu; and 3.7 μg g−1 and 90.0 μg g−1 for Zn. As for kohl products, Pb concentrations ranged between 51.1 μg g−1 and 4839.5 μg g−1, Cd concentrations ranged between 1.0 μg g−1 and 158.6 μg g−1, Cu concentrations ranged between 2.5 μg g−1 and 162.5 μg g−1, and Zn concentrations ranged between 0.7 μg g−1 and 185.0 μg g−1. The results of our study revealed that Pb, Cd, Cu, and Zn contents in investigated samples were high, making from the prolonged use of such products a potential threat to human health. Therefore, major quality controls are recommended in order to enforce acceptable limits of potential contaminants in cosmetics and good manufacturing practice.

Sign in / Sign up

Export Citation Format

Share Document