scholarly journals Algorithm for Predicting the Glicemic Profil in Diabetes Under Regular Measurements

2021 ◽  
Vol 5 (1) ◽  
pp. 17-26
Author(s):  
Svitlana Kiforenko ◽  
Igor Vasyliev ◽  
Mykola Lavrenyuk ◽  
Tatiana Hontar
Keyword(s):  
Mathematical Modeling ◽  
Continuous Monitoring ◽  
Insulin Dose ◽  
Mathematical Formalism ◽  
Model Parameters ◽  
Modeling Tools ◽  
Glucose Levels ◽  
Wide Range ◽  
Glycemic Profile ◽  
Analytical Formulae

Background. In recent years, modern technical devices have been created so that to use in the practice of treating diabetes mellitus. These are systems for continuous monitoring of glycemia, which is a significant addition to the widely accepted measurements of glucose levels with a glucometer, various infusion systems, which significantly improve the doctor's decision-making process. However, such technical means are quite expensive and inaccessible to a wide range of users. In addition, their use is associated with both adverse reactions when wearing them and with patient compliance issues. In this case an alternative can be using mathematical modeling tools. Objective. The aim of the paper is to prove the possibility of using mathematical modeling to predict the glycemic profile as a certain degree of alternative to a sensor for continuous monitoring of blood glucose levels under conditions of limited irregular measurements. Methods. To solve the problem it is proposed to employ the technology of mathematical modeling. The structure of the model makes it possible to implement the mathematical formalism by analytical formulae. Results. As a result, the insulin-glucose-tolerance test has been developed that allows quantitatively assessing a patient's personal sensitivity to insulin-bolus therapy. We proposed the mathematical model for solving the problem by analytical formulae. Algorithms for identifying model parameters, an algorithm for calculating the insulin dose that compensates for the carbohydrate component in the intended meal, and an algorithm for predicting the daily glycemic profile have been developed. The software-algorithmic structure for the implementation of the mathematical formalism has been developed. Conclusions. The conducted simulation study employing the technology of mathematical modeling makes it possible to evaluate the functioning of the developed procedures at the preclinical stage. The simplicity of calculations using analytical formulae can be a prerequisite for the implementation of the algorithm in portable autonomous special-purpose devices or in smartdata under the Android OS, which is a definite contribution to development of digital diabetology.

scholarly journals Rheological Characterization and Mathematical Modeling of a SEBS Blend for Industrial Applications where Nowadays Liquid Silicone Rubber is Used

2012 ◽  
Vol 502 ◽  
pp. 109-114
Author(s):  
D. Juárez ◽  
S. Ferrándiz ◽  
R. Balart ◽  
M.J. Reig ◽  
M.A. Peydró
Keyword(s):  
Mathematical Modeling ◽  
Silicone Rubber ◽  
Thermoplastic Elastomer ◽  
Industrial Applications ◽  
Model Parameters ◽  
Rheological Characterization ◽  
Injection Process ◽  
Liquid Silicone Rubber ◽  
Wide Range ◽  
Liquid Silicone

SEBS (styrene-ethylene/butylene-styrene) is a hydrogenated SBS used as a compatibilizer of other thermoplastic or as a blend to improve the properties (mainly impact). There is very little information about SEBSs research, independent of other materials. This study focuses on a blend from the providers SEBS extreme hardness (50% Shore-A 5 and 50% Shore-A 90) in order to analyze the miscibility of mixed materials from the storage of 2 references only. It has been used the thermoplastic elastomer Megol TA® SEBS, whose characteristics make it special due to the wide range of hardness and transparency, and can be obtained blend for industrial applications where nowadays liquid silicone rubber is used. Next step is rheological characterization of the blend, analyzing the viscosity for subsequent mathematical modeling. Finally, in order to reproduce the rheological behavior of materials during the injection process, Autodesk Moldflow Inside 2010 CAE (Computer Aided Engineering) tool has been used with Cross-WLF model parameters, and compared with tests injected.

Structure Guided Molecular Docking Assisted Alignment Dependent 3DQSAR Study on Steroidal Aromatase Inhibitors (SAIs) as Anti-breast Cancer Agents

2019 ◽  
Vol 16 (7) ◽  
pp. 808-817 ◽  
Author(s):  
Laxmi Banjare ◽  
Sant Kumar Verma ◽  
Akhlesh Kumar Jain ◽  
Suresh Thareja
Keyword(s):  
Breast Cancer ◽  
Molecular Docking ◽  
Aromatase Inhibitors ◽  
Direct Synthesis ◽  
3D Qsar ◽  
Chemotherapeutic Agents ◽  
Modeling Tools ◽  
Data Set ◽  
Wide Range ◽  
Steroidal Aromatase Inhibitors

Background: In spite of the availability of various treatment approaches including surgery, radiotherapy, and hormonal therapy, the steroidal aromatase inhibitors (SAIs) play a significant role as chemotherapeutic agents for the treatment of estrogen-dependent breast cancer with the benefit of reduced risk of recurrence. However, due to greater toxicity and side effects associated with currently available anti-breast cancer agents, there is emergent requirement to develop target-specific AIs with safer anti-breast cancer profile. Methods: It is challenging task to design target-specific and less toxic SAIs, though the molecular modeling tools viz. molecular docking simulations and QSAR have been continuing for more than two decades for the fast and efficient designing of novel, selective, potent and safe molecules against various biological targets to fight the number of dreaded diseases/disorders. In order to design novel and selective SAIs, structure guided molecular docking assisted alignment dependent 3D-QSAR studies was performed on a data set comprises of 22 molecules bearing steroidal scaffold with wide range of aromatase inhibitory activity. Results: 3D-QSAR model developed using molecular weighted (MW) extent alignment approach showed good statistical quality and predictive ability when compared to model developed using moments of inertia (MI) alignment approach. Conclusion: The explored binding interactions and generated pharmacophoric features (steric and electrostatic) of steroidal molecules could be exploited for further design, direct synthesis and development of new potential safer SAIs, that can be effective to reduce the mortality and morbidity associated with breast cancer.

scholarly journals Inferring Linkage Disequilibrium Between a Polymorphic Marker Locus and a Trait Locus in Natural Populations

Genetics ◽  
2000 ◽  
Vol 156 (1) ◽  
pp. 457-467 ◽  
Author(s):  
Z W Luo ◽  
S H Tao ◽  
Z-B Zeng
Keyword(s):  
Linkage Disequilibrium ◽  
Allele Frequency ◽  
Random Mating ◽  
Natural Populations ◽  
Polymorphic Marker ◽  
Marker Locus ◽  
Model Parameters ◽  
Phenotypic Variance ◽  
Wide Range ◽  
Trait Locus

Abstract Three approaches are proposed in this study for detecting or estimating linkage disequilibrium between a polymorphic marker locus and a locus affecting quantitative genetic variation using the sample from random mating populations. It is shown that the disequilibrium over a wide range of circumstances may be detected with a power of 80% by using phenotypic records and marker genotypes of a few hundred individuals. Comparison of ANOVA and regression methods in this article to the transmission disequilibrium test (TDT) shows that, given the genetic variance explained by the trait locus, the power of TDT depends on the trait allele frequency, whereas the power of ANOVA and regression analyses is relatively independent from the allelic frequency. The TDT method is more powerful when the trait allele frequency is low, but much less powerful when it is high. The likelihood analysis provides reliable estimation of the model parameters when the QTL variance is at least 10% of the phenotypic variance and the sample size of a few hundred is used. Potential use of these estimates in mapping the trait locus is also discussed.

scholarly journals Antifungal Activity of Propyl Disulfide from Neem (Azadirachta indica) in Vapor and Agar Diffusion Assays against Anthracnose Pathogens (Colletotrichum gloeosporioides and Colletotrichum acutatum) in Mango Fruit

2021 ◽  
Vol 9 (4) ◽  
pp. 839
Author(s):  
Muhammad Rafiullah Khan ◽  
Vanee Chonhenchob ◽  
Chongxing Huang ◽  
Panitee Suwanamornlert
Keyword(s):  
Antifungal Activity ◽  
Mycelial Growth ◽  
Colletotrichum Gloeosporioides ◽  
Colletotrichum Acutatum ◽  
Model Parameters ◽  
Pathogenicity Test ◽  
Agar Diffusion ◽  
Wide Range ◽  
Significant Difference ◽  
Diffusion Assay

Microorganisms causing anthracnose diseases have a medium to a high level of resistance to the existing fungicides. This study aimed to investigate neem plant extract (propyl disulfide, PD) as an alternative to the current fungicides against mango’s anthracnose. Microorganisms were isolated from decayed mango and identified as Colletotrichum gloeosporioides and Colletotrichum acutatum. Next, a pathogenicity test was conducted and after fulfilling Koch’s postulates, fungi were reisolated from these symptomatic fruits and we thus obtained pure cultures. Then, different concentrations of PD were used against these fungi in vapor and agar diffusion assays. Ethanol and distilled water were served as control treatments. PD significantly (p ≤ 0.05) inhibited more of the mycelial growth of these fungi than both controls. The antifungal activity of PD increased with increasing concentrations. The vapor diffusion assay was more effective in inhibiting the mycelial growth of these fungi than the agar diffusion assay. A good fit (R2, 0.950) of the experimental data in the Gompertz growth model and a significant difference in the model parameters, i.e., lag phase (λ), stationary phase (A) and mycelial growth rate, further showed the antifungal efficacy of PD. Therefore, PD could be the best antimicrobial compound against a wide range of microorganisms.

scholarly journals A Reinforcement Learning Framework for Spiking Networks with Dynamic Synapses

2011 ◽  
Vol 2011 ◽  
pp. 1-12 ◽  
Author(s):  
Karim El-Laithy ◽  
Martin Bogdan
Keyword(s):  
Reinforcement Learning ◽  
Spike Timing ◽  
Neural Representation ◽  
Model Parameters ◽  
Learning Framework ◽  
Reference Target ◽  
Wide Range ◽  
Spiking Network ◽  
Dynamic Synapses ◽  
Exclusive Or

An integration of both the Hebbian-based and reinforcement learning (RL) rules is presented for dynamic synapses. The proposed framework permits the Hebbian rule to update the hidden synaptic model parameters regulating the synaptic response rather than the synaptic weights. This is performed using both the value and the sign of the temporal difference in the reward signal after each trial. Applying this framework, a spiking network with spike-timing-dependent synapses is tested to learn the exclusive-OR computation on a temporally coded basis. Reward values are calculated with the distance between the output spike train of the network and a reference target one. Results show that the network is able to capture the required dynamics and that the proposed framework can reveal indeed an integrated version of Hebbian and RL. The proposed framework is tractable and less computationally expensive. The framework is applicable to a wide class of synaptic models and is not restricted to the used neural representation. This generality, along with the reported results, supports adopting the introduced approach to benefit from the biologically plausible synaptic models in a wide range of intuitive signal processing.

scholarly journals Modelling the Inflation and Elastic Instabilities of Rubber-Like Spherical and Cylindrical Shells Using a New Generalised Neo-Hookean Strain Energy Function

2021 ◽  
Author(s):  
Afshin Anssari-Benam ◽  
Andrea Bucchi ◽  
Giuseppe Saccomandi
Keyword(s):  
Experimental Data ◽  
Energy Function ◽  
Limit Point ◽  
Strain Energy ◽  
Cylindrical Shells ◽  
Strain Energy Function ◽  
Model Parameters ◽  
Wide Range ◽  
Cylindrical Tubes ◽  
Gent Model

AbstractThe application of a newly proposed generalised neo-Hookean strain energy function to the inflation of incompressible rubber-like spherical and cylindrical shells is demonstrated in this paper. The pressure ($P$ P ) – inflation ($\lambda $ λ or $v$ v ) relationships are derived and presented for four shells: thin- and thick-walled spherical balloons, and thin- and thick-walled cylindrical tubes. Characteristics of the inflation curves predicted by the model for the four considered shells are analysed and the critical values of the model parameters for exhibiting the limit-point instability are established. The application of the model to extant experimental datasets procured from studies across 19th to 21st century will be demonstrated, showing favourable agreement between the model and the experimental data. The capability of the model to capture the two characteristic instability phenomena in the inflation of rubber-like materials, namely the limit-point and inflation-jump instabilities, will be made evident from both the theoretical analysis and curve-fitting approaches presented in this study. A comparison with the predictions of the Gent model for the considered data is also demonstrated and is shown that our presented model provides improved fits. Given the simplicity of the model, its ability to fit a wide range of experimental data and capture both limit-point and inflation-jump instabilities, we propose the application of our model to the inflation of rubber-like materials.

scholarly journals Role of Insulin in Health and Disease: An Update

2021 ◽  
Vol 22 (12) ◽  
pp. 6403
Author(s):  
Md Saidur Rahman ◽  
Khandkar Shaharina Hossain ◽  
Sharnali Das ◽  
Sushmita Kundu ◽  
Elikanah Olusayo Adegoke ◽  
...  
Keyword(s):  
Insulin Signaling ◽  
Basic Research ◽  
Future Research ◽  
Protective Effects ◽  
Glucose Levels ◽  
Physiological Processes ◽  
Blood Glucose Levels ◽  
Wide Range ◽  
Health And Disease

Insulin is a polypeptide hormone mainly secreted by β cells in the islets of Langerhans of the pancreas. The hormone potentially coordinates with glucagon to modulate blood glucose levels; insulin acts via an anabolic pathway, while glucagon performs catabolic functions. Insulin regulates glucose levels in the bloodstream and induces glucose storage in the liver, muscles, and adipose tissue, resulting in overall weight gain. The modulation of a wide range of physiological processes by insulin makes its synthesis and levels critical in the onset and progression of several chronic diseases. Although clinical and basic research has made significant progress in understanding the role of insulin in several pathophysiological processes, many aspects of these functions have yet to be elucidated. This review provides an update on insulin secretion and regulation, and its physiological roles and functions in different organs and cells, and implications to overall health. We cast light on recent advances in insulin-signaling targeted therapies, the protective effects of insulin signaling activators against disease, and recommendations and directions for future research.

scholarly journals Study on Friction in Automotive Shock Absorbers Part 1: Friction Simulation Using a Dynamic Friction Model in the Contact Zone of an FEM Model

Vehicles ◽  
2021 ◽  
Vol 3 (2) ◽  
pp. 212-232
Author(s):  
Ludwig Herzog ◽  
Klaus Augsburg
Keyword(s):  
Ride Comfort ◽  
Viscous Friction ◽  
Simulation Method ◽  
Friction Model ◽  
Model Parameters ◽  
Dynamic Friction ◽  
Friction Modeling ◽  
Shock Absorbers ◽  
Operation Conditions ◽  
Wide Range

The important change in the transition from partial to high automation is that a vehicle can drive autonomously, without active human involvement. This fact increases the current requirements regarding ride comfort and dictates new challenges for automotive shock absorbers. There exist two common types of automotive shock absorber with two friction types: The intended viscous friction dissipates the chassis vibrations, while the unwanted solid body friction is generated by the rubbing of the damper’s seals and guides during actuation. The latter so-called static friction impairs ride comfort and demands appropriate friction modeling for the control of adaptive or active suspension systems. In this article, a simulation approach is introduced to model damper friction based on the most friction-relevant parameters. Since damper friction is highly dependent on geometry, which can vary widely, three-dimensional (3D) structural FEM is used to determine the deformations of the damper parts resulting from mounting and varying operation conditions. In the respective contact zones, a dynamic friction model is applied and parameterized based on the single friction point measurements. Subsequent to the parameterization of the overall friction model with geometry data, operation conditions, material properties and friction model parameters, single friction point simulations are performed, analyzed and validated against single friction point measurements. It is shown that this simulation method allows for friction prediction with high accuracy. Consequently, its application enables a wide range of parameters relevant to damper friction to be investigated with significantly increased development efficiency.

scholarly journals SGLT2 inhibitors: a narrative review of efficacy and safety

2021 ◽  
Vol 121 (2) ◽  
pp. 229-239
Author(s):  
Donald S. Nelinson ◽  
Jose M. Sosa ◽  
Robert J. Chilton
Keyword(s):  
Adverse Events ◽  
Sglt2 Inhibitor ◽  
Sglt2 Inhibitors ◽  
Narrative Review ◽  
Atherosclerotic Cardiovascular Disease ◽  
Comorbid Conditions ◽  
Postprandial Plasma Glucose ◽  
Renal Outcomes ◽  
Glucose Levels ◽  
Wide Range

Abstract Type 2 diabetes mellitus (T2DM) is a cardio-renal-metabolic condition that is frequently associated with multiple comorbidities, including atherosclerotic cardiovascular disease (ASCVD), heart failure (HF), and chronic kidney disease (CKD). The sodium-glucose co-transporter-2 (SGLT2) inhibitors, which lower glycated hemoglobin, fasting and postprandial plasma glucose levels, body weight, and blood pressure, as well as reduce the risk of a range of cardiovascular and renal outcomes without increasing hypoglycaemic risk, have heralded a paradigm shift in the management of T2DM. These drugs are compatible with most other glucose-lowering agents and can be used in patients with a wide range of comorbid conditions, including ASCVD, HF, and CKD, and in those with estimated glomerular filtration rates as low as 30 mL/min/1.73 m2. However, there are misunderstandings surrounding the clinical implications of SGLT2 inhibitors’ mechanism of action and concerns about the key adverse events with which this class of drugs has been associated. This narrative review summarizes the data that support the efficacy of SGLT2 inhibitors in reducing the risks of cardiovascular and renal outcomes in patients with T2DM and comorbid conditions and clarifies information relating to SGLT2 inhibitor-related adverse events.

Coupled Thermo-Hydro-Geochemical Models of Engineered Barrier Systems: The Febex Project

2000 ◽  
Vol 663 ◽  
Author(s):  
J. Samper ◽  
R. Juncosa ◽  
V. Navarro ◽  
J. Delgado ◽  
L. Montenegro ◽  
...  
Keyword(s):  
Large Scale ◽  
Reference Model ◽  
Numerical Models ◽  
Full Scale ◽  
Small Scale ◽  
Model Parameters ◽  
In Situ Test ◽  
Wide Range ◽  
Engineered Barrier

ABSTRACTFEBEX (Full-scale Engineered Barrier EXperiment) is a demonstration and research project dealing with the bentonite engineered barrier designed for sealing and containment of waste in a high level radioactive waste repository (HLWR). It includes two main experiments: an situ full-scale test performed at Grimsel (GTS) and a mock-up test operating since February 1997 at CIEMAT facilities in Madrid (Spain) [1,2,3]. One of the objectives of FEBEX is the development and testing of conceptual and numerical models for the thermal, hydrodynamic, and geochemical (THG) processes expected to take place in engineered clay barriers. A significant improvement in coupled THG modeling of the clay barrier has been achieved both in terms of a better understanding of THG processes and more sophisticated THG computer codes. The ability of these models to reproduce the observed THG patterns in a wide range of THG conditions enhances the confidence in their prediction capabilities. Numerical THG models of heating and hydration experiments performed on small-scale lab cells provide excellent results for temperatures, water inflow and final water content in the cells [3]. Calculated concentrations at the end of the experiments reproduce most of the patterns of measured data. In general, the fit of concentrations of dissolved species is better than that of exchanged cations. These models were later used to simulate the evolution of the large-scale experiments (in situ and mock-up). Some thermo-hydrodynamic hypotheses and bentonite parameters were slightly revised during TH calibration of the mock-up test. The results of the reference model reproduce simultaneously the observed water inflows and bentonite temperatures and relative humidities. Although the model is highly sensitive to one-at-a-time variations in model parameters, the possibility of parameter combinations leading to similar fits cannot be precluded. The TH model of the “in situ” test is based on the same bentonite TH parameters and assumptions as for the “mock-up” test. Granite parameters were slightly modified during the calibration process in order to reproduce the observed thermal and hydrodynamic evolution. The reference model captures properly relative humidities and temperatures in the bentonite [3]. It also reproduces the observed spatial distribution of water pressures and temperatures in the granite. Once calibrated the TH aspects of the model, predictions of the THG evolution of both tests were performed. Data from the dismantling of the in situ test, which is planned for the summer of 2001, will provide a unique opportunity to test and validate current THG models of the EBS.

Sign in / Sign up

Export Citation Format

Share Document