scholarly journals Adhesion and Stability of Nanocellulose Coatings on Flat Polymer Films and Textiles

2020 ◽  
Author(s):  
Raha Saremi ◽  
Nikolay Borodinov ◽  
Amine Mohamed Laradji ◽  
Suraj Sharma ◽  
Igor Luzinov ◽  
...  
Keyword(s):  
Polymer Films ◽  
Food Packaging ◽  
Mechanical Stability ◽  
Polymer Coatings ◽  
High Specific Surface Area ◽  
Force Microscopy ◽  
Polycarboxylic Acids ◽  
Composition And Structure ◽  
Filtration Properties ◽  
Physical And Chemical

Renewable nanocellulose materials received increased attention owing to their small dimensions, high specific surface area, high mechanical characteristics, biocompatibility, and compostability. Nanocellulose coatings are among many interesting applications of these materials to functionalize different by composition and structure surfaces, including plastics, polymer coatings, and textiles with broader applications from food packaging to smart textiles. Variations in porosity and thickness of nanocellulose coatings are used to adjust a load of functional molecules and particles into the coatings, their permeability, and filtration properties. Mechanical stability of nanocellulose coatings in a wet and dry state are critical characteristics for many applications. In this work, nanofibrillated and nanocrystalline cellulose coatings deposited on the surface of polymer films and textiles made of cellulose, polyester, and nylon are studied using atomic force microscopy, ellipsometry, and T-peel adhesion tests. Methods to improve coatings adhesion and stability using physical and chemical cross-linking with added polymers and polycarboxylic acids are analyzed in this study. The paper reports on the effect of the substrate structure and ability of nanocellulose particles to intercalate into the substrate on the coating adhesion.

scholarly journals Adhesion and Stability of Nanocellulose Coatings on Flat Polymer Films and Textiles

Molecules ◽  
2020 ◽  
Vol 25 (14) ◽  
pp. 3238
Author(s):  
Raha Saremi ◽  
Nikolay Borodinov ◽  
Amine Mohamed Laradji ◽  
Suraj Sharma ◽  
Igor Luzinov ◽  
...  
Keyword(s):  
Polymer Films ◽  
Food Packaging ◽  
Mechanical Stability ◽  
Polymer Coatings ◽  
High Specific Surface Area ◽  
Force Microscopy ◽  
Polycarboxylic Acids ◽  
Composition And Structure ◽  
Filtration Properties ◽  
Physical And Chemical

Renewable nanocellulose materials received increased attention owing to their small dimensions, high specific surface area, high mechanical characteristics, biocompatibility, and compostability. Nanocellulose coatings are among many interesting applications of these materials to functionalize different by composition and structure surfaces, including plastics, polymer coatings, and textiles with broader applications from food packaging to smart textiles. Variations in porosity and thickness of nanocellulose coatings are used to adjust a load of functional molecules and particles into the coatings, their permeability, and filtration properties. Mechanical stability of nanocellulose coatings in a wet and dry state are critical characteristics for many applications. In this work, nanofibrillated and nanocrystalline cellulose coatings deposited on the surface of polymer films and textiles made of cellulose, polyester, and nylon are studied using atomic force microscopy, ellipsometry, and T-peel adhesion tests. Methods to improve coatings’ adhesion and stability using physical and chemical cross-linking with added polymers and polycarboxylic acids are analyzed in this study. The paper reports on the effect of the substrate structure and ability of nanocellulose particles to intercalate into the substrate on the coating adhesion.

Clathrin-Inspired Coating and Stabilization of Liposomes by DNA Self-Assembly

2019 ◽  
Author(s):  
Kevin N. Baumann ◽  
Luca Piantanida ◽  
Javier García-Nafría ◽  
Diana Sobota ◽  
Kislon Voïtchovsky ◽  
...  
Keyword(s):  
Self Assembly ◽  
Mechanical Stability ◽  
Lipid Vesicles ◽  
The Self ◽  
Force Microscopy ◽  
Atomic Force ◽  
Cryo Electron Microscopy ◽  
Further Development ◽  
Liposome Surface ◽  
Dna Coating

The self-assembly of the protein clathrin on biological membranes facilitates essential processes of endocytosis in biological systems and has provided a source of inspiration for materials design by the highly ordered structural appearance. By mimicking the architecture of clathrin self-assemblies to coat liposomes with biomaterials, new classes of hybrid carriers can be derived. Here we present a method for fabricating DNA-coated liposomes by hydrophobically anchoring and subsequently growing a DNA network on the liposome surface which structurally mimics clathrin assemblies. Dynamic light scattering (DLS), ζ-potential and cryo-electron microscopy (cryo-EM) measurements independently demonstrate successful DNA coating. Nanomechanical measurements conducted with atomic force microscopy (AFM) show that the DNA coating enhances the mechanical stability of the liposomes relative to uncoated ones. Furthermore, we provide the possibility to reverse the coating process by triggering the disassembly of the DNA coating through a toehold-mediated displacement reaction. Our results describe a straightforward, versatile, and reversible approach for coating and stabilizing lipid vesicles by an interlaced DNA network. This method has potential for further development towards the ordered arrangement of tailored functionalities on the surfaces of liposomes and for applications as hybrid nanocarrier.

Development of leftover rice/gelatin interpenetrating polymer network films for food packaging

2021 ◽  
Vol 10 (1) ◽  
pp. 37-48
Author(s):  
Sijia Li ◽  
Chun Shao ◽  
Zhikun Miao ◽  
Panfang Lu
Keyword(s):  
Food Packaging ◽  
Polymer Network ◽  
Raw Material ◽  
Interpenetrating Polymer Network ◽  
Waste Biomass ◽  
Practical Application ◽  
Water Contact ◽  
Force Microscopy ◽  
Atomic Force ◽  
Morphology Of Films

Abstract Waste biomass can be used as a raw material for food packaging. Different concentrations of gelatin (GEL) were introduced into the leftover rice (LR) system to form an interpenetrating polymer network (IPN) for improving the properties of the films. The structure and morphology of films were evaluated by Fourier transform infrared, scanning electron microscopy, and atomic force microscopy, which showed good compatibility between LR and GEL. The moisture content and oil absorption rate of IPN films were down by 105% and 182%, respectively, which showed better water and oil resistance than the LR film. In addition, increasing GEL concentration led to enhancement in the tensile strength of films from 2.42 to 11.40 MPa. The water contact angle value of the IPN films (117.53°) increased by 147% than the LR film (47.56°). The low haze of IPN films was obtained with the increment of the mutual entanglement of LR and GEL. The 30–50% GEL addition improved the water vapor barrier and thermal stability properties of the IPN films. This study highlights that LR as waste biomass can have a practical application in food packaging.

Recent advanced applications of ion-gel in ionic-gated transistor

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Depeng Wang ◽  
Shufang Zhao ◽  
Ruiyang Yin ◽  
Linlin Li ◽  
Zheng Lou ◽  
...  
Keyword(s):  
Recent Progress ◽  
Mechanical Stability ◽  
Dielectric Material ◽  
Charge Carriers ◽  
Future Perspectives ◽  
Organic Transistor ◽  
Ion Gel ◽  
Physical And Chemical ◽  
Large Capacitance ◽  
Advanced Applications

AbstractDiversified regulation of electrons have received much attention to realize a multi-functional transistor, and it is crucial to have a considerable control over the charge carriers in transistors. Ionic gel, as the dielectric material in transistors, facilitates a large capacitance, and high induced-carrier concentrations. This review presents the recent progress in ionic-gated transistors (IGTs) that have good mechanical stability as well as high physical and chemical stability. We first briefly introduce the various applications of IGTs in sensors, neuromorphic transistors, organic transistor circuits, and health detection. Finally, the future perspectives of IGTs are discussed and some possible solutions to the challenges are also proposed.

scholarly journals Evaluation of the effects of additives on the properties of starch-based bioplastic film

2021 ◽  
Vol 3 (4) ◽  
Author(s):  
Olugbenga O. Oluwasina ◽  
Bolaji P. Akinyele ◽  
Sunday J. Olusegun ◽  
Olayinka O. Oluwasina ◽  
Nelcy D. S. Mohallem
Keyword(s):  
Tensile Strength ◽  
Food Packaging ◽  
Surface Topology ◽  
Root Mean Square Roughness ◽  
Starch Solution ◽  
Dialdehyde Starch ◽  
Force Microscopy ◽  
Silica Solution ◽  
The One ◽  
Bioplastic Film

AbstractThe adverse environmental effects of petroleum-based packaging plastics have necessitated the need for eco-friendly bioplastics. Most bioplastics are starch-based and are not without drawbacks, hence there is the need for their properties to be improved. In this study, the effect of varying concentrations of dialdehyde starch and silica solutions on the physical, mechanical, biodegradable, surface topology, and thermal properties of the bioplastic films was examined. The additive concentrations were varied from 60 to 100%. The bioplastic films produced with dialdehyde starch solution recorded better moisture content (6.62–11.85%), bioplastic film solubility (4.23–7.90%), and tensile strength (1.63–3.06 MPa), against (11.24–14.26%), (7.77–19.27%) and (0.53–0.73 MPa) respectively for bioplastic films produced with silica solution. The atomic force microscopy analysis; root-mean-square roughness, kurtosis, and skewness revealed better miscibility and compatibility between the starch matrix and the dialdehyde solution than between the starch matrix and the silica solution. Bioplastic with added dialdehyde starch solution has better tensile strength and long biodegradability than that with silica solution. The research has demonstrated that bioplastic film produced with starch and dialdehyde starch solution has better properties than the one produced with starch and silica solution. The properties evaluation results of the bioplastic films thus demonstrated their aptness for food packaging applications. Graphic abstract

scholarly journals Bimetallic Nanocrystals: Structure, Controllable Synthesis and Applications in Catalysis, Energy and Sensing

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1926
Author(s):  
Gaojie Li ◽  
Wenshuang Zhang ◽  
Na Luo ◽  
Zhenggang Xue ◽  
Qingmin Hu ◽  
...  
Keyword(s):  
Gas Sensing ◽  
Chemical Properties ◽  
Research Progress ◽  
Synthesis Methods ◽  
Controlled Synthesis ◽  
Controllable Synthesis ◽  
Composition And Structure ◽  
Bimetallic Nanocrystals ◽  
Physical And Chemical ◽  
And Chemical Properties

In recent years, bimetallic nanocrystals have attracted great interest from many researchers. Bimetallic nanocrystals are expected to exhibit improved physical and chemical properties due to the synergistic effect between the two metals, not just a combination of two monometallic properties. More importantly, the properties of bimetallic nanocrystals are significantly affected by their morphology, structure, and atomic arrangement. Reasonable regulation of these parameters of nanocrystals can effectively control their properties and enhance their practicality in a given application. This review summarizes some recent research progress in the controlled synthesis of shape, composition and structure, as well as some important applications of bimetallic nanocrystals. We first give a brief introduction to the development of bimetals, followed by the architectural diversity of bimetallic nanocrystals. The most commonly used and typical synthesis methods are also summarized, and the possible morphologies under different conditions are also discussed. Finally, we discuss the composition-dependent and shape-dependent properties of bimetals in terms of highlighting applications such as catalysis, energy conversion, gas sensing and bio-detection applications.

scholarly journals Synthesis and Conductivity Studies of Poly(Methyl Methacrylate) (PMMA) by Co-Polymerization and Blending with Polyaniline (PANi)

Polymers ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 1939
Author(s):  
Helyati Abu Hassan Shaari ◽  
Muhammad Mahyiddin Ramli ◽  
Mohd Nazim Mohtar ◽  
Norizah Abdul Rahman ◽  
Azizan Ahmad
Keyword(s):  
Methyl Methacrylate ◽  
Mechanical Stability ◽  
Chemical Properties ◽  
Cost Effective ◽  
Poly Methyl Methacrylate ◽  
Conducting Materials ◽  
Potential Applications ◽  
Polymerization Condition ◽  
Physical And Chemical ◽  
And Chemical Properties

Poly(methyl methacrylate) (PMMA) is a lightweight insulating polymer that possesses good mechanical stability. On the other hand, polyaniline (PANi) is one of the most favorable conducting materials to be used, as it is easily synthesized, cost-effective, and has good conductivity. However, most organic solvents have restricted potential applications due to poor mechanical properties and dispersibility. Compared to PANi, PMMA has more outstanding physical and chemical properties, such as good dimensional stability and better molecular interactions between the monomers. To date, many research studies have focused on incorporating PANi into PMMA. In this review, the properties and suitability of PANi as a conducting material are briefly reviewed. The major parts of this paper reviewed different approaches to incorporating PANi into PMMA, as well as evaluating the modifications to improve its conductivity. Finally, the polymerization condition to prepare PMMA/PANi copolymer to improve its conductivity is also discussed.

Characterization of Gelatin Composite with Low Content Hydroxyapatite and the Influence on Mesenchymal Stem Cell Culture

2016 ◽  
Vol 675-676 ◽  
pp. 473-476 ◽  
Author(s):  
Junjira Tanum ◽  
Suruk Udomsom ◽  
Wassanai Wattanutchariya ◽  
Pat Sooksaen ◽  
Fahsai Kantawong
Keyword(s):  
Stem Cell ◽  
Mesenchymal Stem Cell ◽  
Human Mscs ◽  
Natural Bone Mineral ◽  
Hydrogel Scaffolds ◽  
Force Microscopy ◽  
Adhesion Ability ◽  
Atomic Force ◽  
Nanocrystalline Hydroxyapatite ◽  
Composition And Structure

In tussue engineering, hydrogel-based scaffold is one of the most common method for bone tissue engineering. Gelatin is a common material for scaffold, whereas hydroxyapatite (HA) has a similar composition and structure to natural bone mineral. HA can also increase cell adhesion ability of the scaffold. This research focuses on the fabrication of hydrogel scaffolds using gelatin composite with nanocrystalline hydroxyapatite (nHA). Then the mechanical and physical caharacteristics of the scaffold is investigetad. Low contents nHA is introduced into gelatin in order to modulate mesenchymal stem cell (MSC) behavior. There are three types of scaffolds which contain various HA content. The gelatin is crosslinked with glutaraldehyde before freeze-drying. The Young’s modulus of the surface is investigated using Atomic force microscopy (AFM). The pore size is investigated using scanning electron microscope (SEM). Human MSCs are culture on the scaffold for 3 weeks. The result shows the sucesse in cell cultivation. However, the human MSCs cultured on the fabricated hydrogels do not show any lineage-specific differentiation.

Sign in / Sign up

Export Citation Format

Share Document