scholarly journals Reliability Assessment in Wireless Apparatus Using LoRa and Sigfox in Catch Basin

2021 ◽  
Vol 16 (3) ◽  
pp. 363-370
Author(s):  
Wataru Kobayashi ◽  
Keyword(s):  
Water Level ◽  
Global Climate ◽  
High Reliability ◽  
Wireless Transmission ◽  
Transmission Experiment ◽  
Catch Basin ◽  
Pluvial Flooding ◽  
Catch Basins ◽  
The Cost ◽  
Premonitory Symptoms

The importance of preventing damage from pluvial flooding has been increasing under global climate change. The discovery of premonitory symptoms of pluvial flooding enables effective evacuation and inundation prevention activities. However, apparatuses that automatically detect this in real time are not widespread. There are difficulties in the cost of installing them and the agreements made by the parties concerned, especially in cities. To solve this problem, we devised an apparatus to be installed inside a catch basin that detects its water level. The water level in the catch basin may indicate a sign of pluvial flooding, and the number of people involved in operating the catch basin is smaller than that of facilities on the ground. In order to reduce the cost of installation and operation, we adopted Low Power Wide Area (LPWA), which is a communication method that enables wireless transmission of detected information over long distances for a long time using batteries. So far, for catch basins, a wireless transmission experiment was conducted using LoRa, which is part of LPWA. However, Sigfox, which uses the same frequency as LoRa but has a different wireless system, has not been verified. In this study, the reliability of wireless communication was assessed by apparatuses using LoRa and Sigfox side by side in each catch basin in two places in a densely populated city. The number of experiment days and transmissions differed depending on the apparatus, with the number of days ranging from 97–151 and the number of transmissions from 2328–3748. The reliability in the experiment ranged from 99.97–99.53%. The experimental results showed that wireless transmission was possible with high reliability using either the LoRa or Sigfox system from inside these catch basins. This study expands the options for communication infrastructure that can be used for apparatuses that detect premonitory symptoms of pluvial flooding. This will enable a reduction in installation costs and will expand the range of areas of potential installation.

Fuzzy multi-objective location and routing problem

2020 ◽  
Vol 39 (3) ◽  
pp. 3259-3273
Author(s):  
Nasser Shahsavari-Pour ◽  
Najmeh Bahram-Pour ◽  
Mojde Kazemi
Keyword(s):  
Firefly Algorithm ◽  
High Reliability ◽  
Research Area ◽  
Nsga Ii ◽  
Location Routing Problem ◽  
Routing Problem ◽  
Location Allocation ◽  
Multi Objective ◽  
Location Routing ◽  
The Cost

The location-routing problem is a research area that simultaneously solves location-allocation and vehicle routing issues. It is critical to delivering emergency goods to customers with high reliability. In this paper, reliability in location and routing problems was considered as the probability of failure in depots, vehicles, and routs. The problem has two objectives, minimizing the cost and maximizing the reliability, the latter expressed by minimizing the expected cost of failure. First, a mathematical model of the problem was presented and due to its NP-hard nature, it was solved by a meta-heuristic approach using a NSGA-II algorithm and a discrete multi-objective firefly algorithm. The efficiency of these algorithms was studied through a complete set of examples and it was found that the multi-objective discrete firefly algorithm has a better Diversification Metric (DM) index; the Mean Ideal Distance (MID) and Spacing Metric (SM) indexes are only suitable for small to medium problems, losing their effectiveness for big problems.

Case Study—Failure Analysis of a Multiplexer

2016 ◽  
Author(s):  
Michael Woo ◽  
Marcos Campos ◽  
Luigi Aranda
Keyword(s):  
Failure Analysis ◽  
High Reliability ◽  
Component Failure ◽  
Root Cause ◽  
Knowing That ◽  
Cause Of Failure ◽  
The Cost

Abstract A component failure has the potential to significantly impact the cost, manufacturing schedule, and/or the perceived reliability of a system, especially if the root cause of the failure is not known. A failure analysis is often key to mitigating the effects of a componentlevel failure to a customer or a system; minimizing schedule slips, minimizing related accrued costs to the customer, and allowing for the completion of the system with confidence that the reliability of the product had not been compromised. This case study will show how a detailed and systemic failure analysis was able to determine the exact cause of failure of a multiplexer in a high-reliability system, which allowed the manufacturer to confidently proceed with production knowing that the failure was not a systemic issue, but rather that it was a random “one time” event.

Project Review on Water Level Sensing Using PLC

2016 ◽  
Vol 2 (2) ◽  
Author(s):  
Osama Mahfooz ◽  
Mujtaba Memon ◽  
Asim Iftikhar
Keyword(s):  
Automatic Control ◽  
Water Level ◽  
Digital Computer ◽  
Human Error ◽  
Water Tank ◽  
Industrial Plants ◽  
Commercial Use ◽  
The Cost ◽  
Water Tanks

<span>A PLC is a digital computer used to automate electromechanical processes. This research is<span> based on automation of a water tank by using Siemens PLC. Automatic control of water tanks<span> can work continuously and can provide accurate quantity of water in less time. In such process<span> there is no need of labor so there is no human error. Without human error, the quality of product<span> is better and the cost of production would definitely decrease with no error in quantity required.<span> Water level sensing can be implemented in industrial plants, commercial use and even at home<br /><br class="Apple-interchange-newline" /></span></span></span></span></span></span>

scholarly journals Application of PVStorage System in Typical Industrial Users

2019 ◽  
Vol 118 ◽  
pp. 02068
Author(s):  
Haiwen Wang ◽  
Daoyuan Wen ◽  
Qunyin Gu ◽  
Fangqin Li ◽  
Weijun Gao ◽  
...  
Keyword(s):  
Power Consumption ◽  
High Reliability ◽  
Electricity Consumption ◽  
Optical Storage ◽  
Large Power ◽  
Storage Model ◽  
Industrial Enterprises ◽  
Photovoltaic Power ◽  
Roof Area ◽  
The Cost

The power consumption of industrial enterprises is characterized by large power consumption and high reliability requirement, so the cost of electricity consumption is relatively high. Distributed photovoltaic power generation is clean and environmentally friendly, making full use of the roof area to generate electricity. Based on the characteristics of distributed photovoltaic and energy storage, this paper constructs the distributed optical storage model and operation strategy. In addition, this paper takes an industry as an example to carry out relevant verification and analysis.

scholarly journals The rising cost of warming waters: effects of temperature on the cost of swimming in fishes

2011 ◽  
Vol 8 (2) ◽  
pp. 266-269 ◽  
Author(s):  
Andrew M. Hein ◽  
Katrina J. Keirsted
Keyword(s):  
Water Temperature ◽  
Fish Species ◽  
Global Climate ◽  
Swimming Performance ◽  
Metabolic Cost ◽  
Quantitative Model ◽  
The Body ◽  
Energetic Cost ◽  
Cost Of Transport ◽  
The Cost

Understanding the effects of water temperature on the swimming performance of fishes is central in understanding how fish species will respond to global climate change. Metabolic cost of transport (COT)—a measure of the energy required to swim a given distance—is a key performance parameter linked to many aspects of fish life history. We develop a quantitative model to predict the effect of water temperature on COT. The model facilitates comparisons among species that differ in body size by incorporating the body mass-dependence of COT. Data from 22 fish species support the temperature and mass dependencies of COT predicted by our model, and demonstrate that modest differences in water temperature can result in substantial differences in the energetic cost of swimming.

Use of Plastic Commercial Off-the-Shelf (COTS) Microcircuits for Space Applications

2003 ◽  
Author(s):  
R. David Gerke ◽  
Andrew A. Shapiro ◽  
Shri Agawal ◽  
David M. Peters ◽  
Michael A. Sandor
Keyword(s):  
Lower Cost ◽  
High Reliability ◽  
Space Applications ◽  
Active Devices ◽  
Lower Weight ◽  
Payload Mass ◽  
Commercial Off The Shelf ◽  
Time Required ◽  
The Cost ◽  
Package Materials

Commercial-off-the-shelf (COTS) plastic encapsulated microcircuits (PEM) are candidate-packaging technologies for spacecraft due to their enhanced performance, lower weight and lower cost. Much of the electronics used in space applications would be considered obsolete by everyday standards. This is primarily due the cost and time required for full space qualification. In order to gain the performance available in today’s electronics, COTS PEMs offer a viable path. PEMs can weigh half as much as their counter part ceramic packages. A lighter package results in a smaller overall payload for the same board functionality, a concern of critical importance for space missions because the payload mass dictates the launch vehicle requirements. Costs can be potentially reduced by using screening, accelerated testing or partial qualification techniques to complement the existing commercial qualification as well as by the reduced package materials costs. Assessing the risk associated with potentially lower reliability devices, engineers within the commercial and aerospace industries are using trade-off and risk analysis to aid in reducing spacecraft system cost while increasing performance and maintaining high reliability. In this paper we will outline the issues facing the use of COTS PEMs for spaceflight hardware from the aspect of both the electronic active devices as well as their packages. Finally, we will provide some guidelines for their use.

scholarly journals Gastrointestinal, influenza-like illness and dermatological complaints following exposure to floodwater: a cross-sectional survey in The Netherlands

2015 ◽  
Vol 144 (7) ◽  
pp. 1445-1454 ◽  
Author(s):  
H. DE MAN ◽  
L. MUGHINI GRAS ◽  
B. SCHIMMER ◽  
I. H. M. FRIESEMA ◽  
A. M. DE RODA HUSMAN ◽  
...  
Keyword(s):  
The Netherlands ◽  
Global Climate ◽  
Extreme Rainfall ◽  
Cross Sectional Survey ◽  
Cross Sectional ◽  
Extreme Rainfall Events ◽  
Rainfall Events ◽  
Influenza Like Illness ◽  
Pluvial Flooding ◽  
Gp Visits

SUMMARYExtreme rainfall events may cause pluvial flooding, increasing the transmission of several waterborne pathogens. However, the risk of experiencing clinically overt infections following exposure to pluvial floodwater is poorly estimated. A retrospective cross-sectional survey was performed to quantify the occurrence of self-reported gastrointestinal, influenza-like illness (ILI) and dermatological complaints, and the frequency of visits to the general practitioner (GP), during a 4-week observation period following pluvial flooding at seven locations in The Netherlands. Questionnaires were sent to 817 flooded households, 149 (17%) of which returned the questionnaire reporting information for 199 participants. Contact with floodwater was significantly associated with increased occurrence of gastrointestinal [odds ratio (OR 4·44)], ILI (OR 2·75) and dermatological (OR 6·67) complaints, and GP visits (OR 2·72). Having hand contact with floodwater was associated with gastrointestinal and dermatological complaints, whereas ILI complaints were associated with being engaged in post-flooding cleaning operations and having walked/cycled through floodwater. This study shows that floodwater-associated diseases occur in urban settings following extreme rainfall events in a high-income country. As pluvial floods are expected to escalate in the future due to global climate change, further research is warranted to determine the disease burden of pluvial flooding and to assess the effect of different interventions, including raising awareness among stakeholders.

scholarly journals Residual Activity of Pyriproxyfen Against Mosquitoes in Catch Basins in Northwestern Riverside County, Southern California

2020 ◽  
Vol 36 (3) ◽  
pp. 175-180
Author(s):  
Lal S. Mian ◽  
Angela Caranci ◽  
Jesus Ramos ◽  
J. C. Nelson ◽  
Nikia Smith ◽  
...  
Keyword(s):  
Southern California ◽  
Developmental Stages ◽  
Mosquito Species ◽  
Residual Activity ◽  
Insect Growth Regulator ◽  
Amusement Park ◽  
Complete Control ◽  
Catch Basin ◽  
Riverside County ◽  
Catch Basins

ABSTRACT A field study was carried out on the year-long residual activity of the insect growth regulator (IGR) pyriproxyfen (Nylar 0.5G) in comparison with methoprene (Altosid® XRP Pellets) against mosquito developmental stages in catch basins in northwestern Riverside County, southern California. Pyriproxyfen was applied at 75, 100, 125, 150, 175 g per catch basin and methoprene at 3.5 g per catch basin. A total of 80 catch basins (10 per each treatment and 20 for control) were used. Posttreatment observations of catch basins were carried out at weekly intervals, with all pupal collections reared to adults. Mosquito species composition in this study, consisting mostly of Culex species (693), was predominated by Cx. quinquefasciatus (92.8%), followed by Cx. erythrothorax (5.5%), Cx. tarsalis (1.2%), Cx. stigmatosoma (0.3%), and Cx. thriambus (0.2%). Activity of both IGRs was expressed as percent inhibition of adult emergence (% IAE). Data generated on % IAE showed that, like methoprene, pyriproxyfen provided complete control of mosquitoes at 75, 125, and 175 g per catch basin up to 50 wk posttreatment at the Riverside amusement park, whereas its activity against mosquitoes in catch basins treated with 100 g and 150 g at the Eastvale site was short-lived, up to 48 wk. Water samples, bioassayed against laboratory-reared, 4th-stage larvae of Cx. quinquefasciatus 1–2 wk after the 50-wk-long study, showed evidence of significant % IAE (∼50) by pyriproxyfen at the 2 higher rates (125 g, 175 g) used at the amusement park. In conclusion, pyriproxyfen can be used to effectively control mosquitoes in catch basins for 48–50 wk, depending on the rate of application.

scholarly journals Technologies for Distributed Generation: key performance factors for industrial application

2018 ◽  
pp. 80-87 ◽  
Author(s):  
G. G. Nalbandyan ◽  
S. S. Zholnerchik
Keyword(s):  
Distributed Generation ◽  
Electricity Market ◽  
Smart Grids ◽  
Large Scale ◽  
High Efficiency ◽  
High Reliability ◽  
Low Cost ◽  
Retail Trade ◽  
Economic Effects ◽  
The Cost

The reduction in the cost of technologies for distributed generation involves an increasing decentralization of power generation and large-scale development of distributed sources around the world. This trend is a key change in both the characteristics of electricity consumption: it is becoming increasingly flexible and mobile, and the patterns of consumer behavior in the electricity market. Electricity consumers are becoming at the same time its suppliers and require revision of traditional regulation standards of the electricity market. The purpose of the article is to assess the influence of distributed generation on the economy of both enterprises and the country as a whole. To identify the effects of the introduction of distributed generation technologies, the method of case study analysis is used. The empirical analysis was carried out on the basis of twelve Russian companies that use their own energy sources. The selected companies belong to the following industries: industrial production, housing and communal services, retail trade, construction, agriculture. Technological and economic effects are revealed. Technological ones include: improving consumer reliability, energy security, involving local energy resources, optimizing load management and redundancy, providing the flexibility of smart grids (in terms of generation), reducing the load on the environment, including CO2 emissions. Economic effects: optimization of the load schedule, reduction of losses in the process of transmission/distribution of energy, expansion of cogeneration, etc., providing the consumer with the electricity of a given quality, saving losses in networks, reducing the cost of energy. The identified effects of the introduction of distributed generation technologies make it possible to highlight the advantages of regeneration facilities: high efficiency and the possibility of cogeneration and trigeneration, individual maneuvering capacity loading, high reliability of equipment, low cost of transportation of electricity, fuel usage of the by-products and the main production waste. In conclusion, recommendations are formulated on a set of measures for the development of industrial distributed generation in Russia at the Federal level.

scholarly journals Analysis on carbon footprint: A case study of Gorkhapatra national daily in Nepal

2021 ◽  
Vol 4 (1) ◽  
pp. 42-49
Author(s):  
Anukram Sharma ◽  
Khem N Poudyal ◽  
Nawraj Bhattarai
Keyword(s):  
Fuel Consumption ◽  
Carbon Footprint ◽  
Carbon Emissions ◽  
Carbon Emission ◽  
Raw Materials ◽  
Global Climate ◽  
Total Carbon ◽  
Daily Newspaper ◽  
The Cost

Study of carbon footprint is an emerging field which provides statistical analysis about the contribution of an activity on global climate change. Every human activity in daily life is achieved at the expense of those substances which directly or indirectly contribute to global warming. In this era of global communication, humans are habitual to know about the ongoing changes in the world. Newspapers are one of the reliable sources for getting updated about the global information. Paper-based newspapers come at the cost of greenhouse gas emissions. So, this article based upon an analysis of carbon footprint of Nepal’s national daily newspaper provides evaluation of each of the following: carbon emission during the manufacturing of raw materials, carbon emission from fuel consumption during transportation of raw materials, carbon emissions during the printing of newspaper and carbon emission from the fuel consumption during the transportation of printed newspaper. During the study period of 2019 A.D., the result shows that the total carbon emission of Gorkhapatra newspaper was found to be 2308.5 kg CO2e per ton. The upshot of this study provides not only thorough information about carbon emissions but also builds a foundation for calculation of carbon emissions from paper used in various sectors.

Sign in / Sign up

Export Citation Format

Share Document