scholarly journals Mathematical Modeling of the Working Process of a Two-Stroke Engine with Countermoving Pistons

2021 ◽  
pp. 22-28
Author(s):  
Serhii Kravchenko ◽  
Oleg Linkov ◽  
Maxim Shelestov ◽  
Alexander Bekaryuk ◽  
Eduard Bozhko
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Engine Performance ◽  
Internal Combustion ◽  
Diffusion Combustion ◽  
Working Process ◽  
Advantages And Disadvantages

Simulation of the working process of an internal combustion engine is the basis for all further calculations and studies of the engine. Of particular relevance is the availability of an adequate mathematical model of the engine process due to the fact that due to the trend of continuous improvement of engine performance, it is necessary to take into account many influencing factors to obtain a satisfactory result. The most complex and dependent on many physicochemical parameters is the process of combustion of fuel in the engine. Models of combustion in diesel engines can be divided into three groups: detailed models; empirical and semipemirical models. The analysis of world experience in research and mathematical modeling of combustion process in internal combustion engines is performed in the work. The advantages and disadvantages of different mathematical models are indicated. It is proposed to use a semi-empirical mathematical model of combustion which describes the differential characteristic of the combustion rate by two curves corresponding to the periods of the first flash and diffusion combustion. Use of such model simplifies performance of calculations and at the same time allows to receive qualitative results considering many factors of influence.

scholarly journals Thermodynamic modeling of combustion process of the internal combustion engines – an overview

2019 ◽  
Vol 178 (3) ◽  
pp. 27-37 ◽  
Author(s):  
Denys STEPANENKO ◽  
Zbigniew KNEBA
Keyword(s):  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Engine Performance ◽  
Internal Combustion ◽  
Air Pollutant ◽  
Combustion Engines ◽  
Engine Simulation ◽  
Toxic Emissions ◽  
The Moment

The mathematical description of combustion process in the internal combustion engines is a very difficult task, due to the variety of phenomena that occurring in the engine from the moment when the fuel-air mixture ignites up to the moment when intake and exhaust valves beginning open. Modeling of the combustion process plays an important role in the engine simulation, which allows to predict in-cylinder pressure during the combustion, engine performance and environmental impact with high accuracy. The toxic emissions, which appears as a result of fuels combustion, are one of the main environmental problem and as a result the air pollutant regulations are increasingly stringent, what makes the investigation of the combustion process to be a relevant task.

Study of Combustion Anomalies of H2-ICE With External Mixture Formation

2006 ◽  
Author(s):  
Stephen A. Ciatti ◽  
Thomas Wallner ◽  
Henry Ng ◽  
William F. Stockhausen ◽  
Brad Boyer
Keyword(s):  
Internal Combustion Engines ◽  
Large Scale ◽  
High Efficiency ◽  
Combustion Engine ◽  
Direct Injection ◽  
Combustion Process ◽  
Engine Performance ◽  
Internal Combustion ◽  
Hydrogen Combustion ◽  
Mixture Formation

Although hydrogen is considered one of the most promising future energy carriers, there are several challenges to achieving a “hydrogen economy,” including finding a practical, efficient, cost-effective end-use device. Using hydrogen as a fuel for internal combustion engines is seen as a bridging technology toward a large-scale hydrogen infrastructure. To facilitate high-efficiency, high-power-density use of hydrogen with near-zero emissions in an internal combustion engine, detailed analysis of the hydrogen combustion process is necessary. This paper presents thermodynamic results regarding engine performance and emissions behavior during investigations performed on a single-cylinder research engine fueled by pressurized gaseous hydrogen. Avoiding combustion anomalies is one of the necessary steps to further improve the hydrogen engine power output at high-load operation while, at the same time, reducing fuel consumption and emissions during part-load operation. The overall target of the investigations is an improved combustion concept especially designed for hydrogen-engine-powered vehicles. Future activities include performing optical imaging of hydrogen combustion by using an endoscope. We will also investigate supercharged external mixture formation, as well as hydrogen direct-injection operation.

scholarly journals The Effect of Compression Ratio by Different Piston Head Shape on the Performance of Motorcycle Engine

2019 ◽  
Vol 16 (3) ◽  
pp. 6906-6917
Author(s):  
A. Katijan ◽  
A. H. Kamardin
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Chamber ◽  
Compression Ratio ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Engine Performance ◽  
Internal Combustion ◽  
Head Shape ◽  
Piston Head

The compression ratio has a significant impact on engine power, fuel economy, emission, and other performances of internal combustion engines. Basic engine theory states that a higher compression ratio produces higher torque and horsepower. One way of having different compression ratio is by changing piston head shape. A piston is a cylindrical engine component that slides back and forth in the cylinder bore via forces produced during the combustion process. The piston acts as a movable end of the combustion chamber transmitting power generated from the burning of fuel and air mixture in the combustion chamber. The objective of this study is to compare the engine performance in horsepower and torque produced by the different shapes of the piston head in an internal combustion engine. Three pistons with different head shapes -  standard, mug (low compression) and dome (high compression) with a compression ratio of 8.8:1, 7.61:1 and 10.06:1 were selected for the study. An experiment was also performed to a standard piston installed with 1.5 mm gasket, which has a compression ratio of 7.31. The experiments were carried out using a standard internal combustion engine of a Honda EX5 motorcycle. The engine runs on a chassis dynamometer to measure its torque and horsepower. Piston performance was evaluated based on the maximum available torque and horsepower. The result shows that all three pistons produce different torque and horsepower. The domed piston head produces higher torque and horsepower followed by the standard and mug. By just changing the piston head shape, torque and horsepower increased up to 7.14% and 20.05%  respectively.

scholarly journals Assessment methods of the basic parameters of the combustion process in reciprocating internal combustion engines

2019 ◽  
Vol 179 (4) ◽  
pp. 21-26
Author(s):  
Kazimierz LEJDA ◽  
Michał WARIANEK
Keyword(s):  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Internal Combustion ◽  
Polytropic Index ◽  
Logarithmic Scale ◽  
Combustion Engines ◽  
Advantages And Disadvantages ◽  
Work Cycle ◽  
Basic Parameters

The article presents selected methods of assessing the basic parameters of the combustion process, as well as assessing the usability and limitations of the methods used to determine the initiation and the end of the combustion process in reciprocating internal combustion engines. The methods considered are based on data contained in real, developed indicator diagrams. Basic thermodynamic assumptions and the scope of application of the combustion process evaluation method based on the actual work cycle of a combustion engine prepared in a double logarithmic scale were discussed. The article also mentions the application of the following methods: a direct pressure comparison method in the cylinder, the comparison of the first pressure derivative in the cylinder, logarithmic derivative method of pressure change in the cylinder, the method of the polytropic index, method of the first derivative of the polytropic index and the method of constant values of the polytropic index. The article presents the advantages and disadvantages of the research of our methods.

Effect of Engine Operating Parameters on Combustion and Emission Characteristics

1992 ◽  
Author(s):  
Jiang Lu ◽  
Ashwani K. Gupta ◽  
Eugene L. Keating
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Pressure Rise ◽  
Internal Combustion ◽  
Operating Parameters ◽  
Emission Characteristics ◽  
Pollutants Emission

Abstract Numerical simulation of flow, combustion, heat release rate and pollutants emission characteristics have been obtained using a single cylinder internal combustion engine operating with propane as the fuel. The data are compared with experimental results and show excellent agreement for peak pressure and the rate of pressure rise as a function of crank angle. The results obtained for NO and CO are also found to be in good agreement and are similar to those reported in the literature for the chosen combustion chamber geometry. The results have shown that both the combustion chamber geometry and engine operating parameters affects the flame growth within the combustion chamber which subsequently affects the pollutants emission levels. The code employed the time marching procedure and solves the governing partial differential equations of multi-component chemically reacting fluid flow by finite difference method. The numerical results provide a cost effective means of developing advanced internal combustion engine chamber geometry design that provides high efficiency and low pollution levels. It is expected that increased computational tools will be used in the future for enhancing our understanding of the detailed combustion process in internal combustion engines and all other energy conversion systems. Such detailed information is critical for the development of advanced methods for energy conservation and environmental pollution control.

Ethers and esters as alternative fuels for internal combustion engine: A review

2021 ◽  
pp. 146808742110464
Author(s):  
Yang Hua
Keyword(s):  
Alternative Fuels ◽  
Combustion Engine ◽  
Combustion Process ◽  
Pressure Rise ◽  
Engine Performance ◽  
Internal Combustion ◽  
Operating Conditions ◽  
Future Research ◽  
Particulate Emissions ◽  
Ic Engine

Ether and ester fuels can work in the existing internal combustion (IC) engine with some important advantages. This work comprehensively reviews and summarizes the literatures on ether fuels represented by DME, DEE, DBE, DGM, and DMM, and ester fuels represented by DMC and biodiesel from three aspects of properties, production and engine application, so as to prove their feasibility and prospects as alternative fuels for compression ignition (CI) and spark ignition (SI) engines. These studies cover the effects of ether and ester fuels applied in the form of single fuel, mixed fuel, dual-fuel, and multi-fuel on engine performance, combustion and emission characteristics. The evaluation indexes mainly include torque, power, BTE, BSFC, ignition delay, heat release rate, pressure rise rate, combustion duration, exhaust gas temperature, CO, HC, NOx, PM, and smoke. The results show that ethers and esters have varying degrees of impact on engine performance, combustion and emissions. They can basically improve the thermal efficiency of the engine and reduce particulate emissions, but their effects on power, fuel consumption, combustion process, and CO, HC, and NOx emissions are uncertain, which is due to the coupling of operating conditions, fuel molecular structure, in-cylinder environment and application methods. By changing the injection strategy, adjusting the EGR rate, adopting a new combustion mode, adding improvers or synergizing multiple fuels, adverse effects can be avoided and the benefits of oxygenated fuel can be maximized. Finally, some challenges faced by alternative fuels and future research directions are analyzed.

Computationally Efficient Simulation of Multi-Component Fuel Combustion Using a Sparse Analytical Jacobian Chemistry Solver and High-Dimensional Clustering

2013 ◽  
Author(s):  
Federico Perini ◽  
Anand Krishnasamy ◽  
Youngchul Ra ◽  
Rolf D. Reitz
Keyword(s):  
Reaction Mechanism ◽  
Chemical Kinetics ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Engine Performance ◽  
Internal Combustion ◽  
Point Of View ◽  
High Dimensional ◽  
Computational Point ◽  
Fuel Surrogates

The need for more efficient and environmentally sustainable internal combustion engines is driving research towards the need to consider more realistic models for both fuel physics and chemistry. As far as compression ignition engines are concerned, phenomenological or lumped fuel models are unreliable to capture spray and combustion strategies outside of their validation domains — typically, high-pressure injection and high-temperature combustion. Furthermore, the development of variable-reactivity combustion strategies also creates the need to model comprehensively different hydrocarbon families even in single fuel surrogates. From the computational point of view, challenges to achieving practical simulation times arise from the dimensions of the reaction mechanism, that can be of hundreds species even if hydrocarbon families are lumped into representative compounds, and thus modeled with non-elementary, skeletal reaction pathways. In this case, it is also impossible to pursue further mechanism reductions to lower dimensions. CPU times for integrating chemical kinetics in internal combustion engine simulations ultimately scale with the number of cells in the grid, and with the cube number of species in the reaction mechanism. In the present work, two approaches to reduce the demands of engine simulations with detailed chemistry are presented. The first one addresses the demands due to the solution of the chemistry ODE system, and features the adoption of SpeedCHEM, a newly developed chemistry package that solves chemical kinetics using sparse analytical Jacobians. The second one aims to reduce the number of chemistry calculations by binning the CFD cells of the engine grid into a subset of clusters, where chemistry is solved and then mapped back to the original domain. In particular, a high-dimensional representation of the chemical state space is adopted for keeping track of the different fuel components, and a newly developed bounding-box-constrained k-means algorithm is used to subdivide the cells into reactively homogeneous clusters. The approaches have been tested on a number of simulations featuring multi-component diesel fuel surrogates, and different engine grids. The results show that significant CPU time reductions, of about one order of magnitude, can be achieved without loss of accuracy in both engine performance and emissions predictions, prompting for their applicability to more refined or full-sized engine grids.

scholarly journals Assessment of thermodynamic cycle of internal combustion engine in terms of rightsizing

2019 ◽  
Vol 178 (3) ◽  
pp. 182-186
Author(s):  
Zbigniew SROKA ◽  
Maciej DWORACZYŃSKI
Keyword(s):  
Internal Combustion Engine ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Thermodynamic Cycle ◽  
Internal Combustion ◽  
Research Problem ◽  
Combustion Engines ◽  
Operating Characteristics ◽  
Swept Volume

The modification of the downsizing trend of internal combustion engines towards rightsizing is a new challenge for constructors. The change in the displacement volume of internal combustion engines accompanying the rightsizing idea may in fact mean a reduction or increase of the defining swept volume change factors and thus may affect the change in the operating characteristics as a result of changes in combustion process parameters - a research problem described in this publication. Incidents of changes in the displacement volume were considered along with the change of the compression space and at the change of the geometric degree of compression. The new form of the mathematical dependence describing the efficiency of the thermodynamic cycle makes it possible to evaluate the opera-tion indicators of the internal combustion engine along with the implementation of the rightsizing idea. The work demonstrated the in-variance of cycle efficiency with different forms of rightsizing.

A comprehensive evaluation of water injection in the diesel engine

2021 ◽  
pp. 146808742110442
Author(s):  
Sebastian Welscher ◽  
Mohammad Hossein Moradi ◽  
Antonino Vacca ◽  
Peter Bloch ◽  
Michael Grill ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Internal Combustion Engines ◽  
Comprehensive Evaluation ◽  
Combustion Engine ◽  
Water Injection ◽  
Combustion Process ◽  
Internal Combustion ◽  
Exhaust Emission ◽  
Pressure Trace ◽  
High Level

Due to increasing climate awareness and the introduction of much stricter exhaust emission legislation the internal combustion engine technology faces major challenges. Although the development and state of technology of internal combustion engines generally reached a very high level over the last years those need to be improved even more. Combining water injection with a diesel engine, therefore, seems to be the next logical step in developing a highly efficient drive train for future mobility. To investigate these potentials, a comprehensive evaluation of water injection on the diesel engine was carried out. This study covers >560 individual operating points on the test bench. The tests were carried out on a single-cylinder derived from a Euro 6d four-cylinder passenger car with the port water injection. Furthermore, a detailed pressure trace analysis (PTA) was performed to evaluate various aspects regarding combustion, emission, etc. The results show no significant effects of water injection on the combustion process, but great potential for NOx reduction. It has been shown that with the use of water injection at water-to-fuel rates of 25%, 50%, and 100%, NOx reduction without deterioration of soot levels can be achieved in 62%, 40%, and 20% of the experiments, respectively. Furthermore, water injection in combination with EGR offers additional reduction in NOx emissions.

A Control Oriented SI and HCCI Hybrid Combustion Model for Internal Combustion Engines

2010 ◽  
Author(s):  
Xiaojian Yang ◽  
Guoming G. Zhu ◽  
Zongxuan Sun
Keyword(s):  
Steady State ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Fuel Efficiency ◽  
Combustion Process ◽  
Internal Combustion ◽  
Mean Value ◽  
Combustion Model ◽  
Zone Model ◽  
Transient Control

The combustion mode transition between SI (spark ignited) and HCCI (Homogeneously Charged Compression Ignition) of an IC (Internal Combustion) engine is challenge due to the thermo inertia of residue gas; and model-based control becomes a necessity. This paper presents a control oriented two-zone model to describe the hybrid combustion that starts with SI combustion and ends with HCCI combustion. The gas respiration dynamics were modeled using mean-value approach and the combustion process was modeled using crank resolved method. The developed model was validated in an HIL (Hardware-In-the-Loop) simulation environment for both steady-state and transient operations in SI, HCCI, and SI-HCCI hybrid combustion modes through the exhaust valve timing control (recompression). Furthermore, cooled external EGR (exhaust gas re-circulation) was used to suppress engine knock and enhance the fuel efficiency. The simulation results also illustrates that the transient control parameters of hybrid combustion is quite different from these in steady state operation, indicating the need of a control oriented SI-HCCI hybrid combustion model for transient combustion control.

Sign in / Sign up

Export Citation Format

Share Document