scholarly journals Reología, comportamiento físico-mecánicos y de durabilidad de hormigones con nanosílice.

2012 ◽  
Vol 2 (2) ◽  
pp. 82-88
Author(s):  
E. Téllez Girón ◽  
A .N. Martín Acosta ◽  
A. Pérez Hernández ◽  
U. Verdecia Rodríguez
Keyword(s):  
Resistance Coefficient ◽  
Ultrasonic Pulse ◽  
Effective Porosity ◽  
Capillary Absorption ◽  
Water Absorption Coefficient ◽  
Characterization Methods ◽  
Natural Pozzolans ◽  
Chemical Admixtures ◽  
Microscopy Analysis

RESUMENLa nanosílice es una de las aplicaciones de la nanotecnologia en la construcción, a base de sílica amorfa nanométrica, que se emplea igual que la microsílice, pero con la ventaja que no produce contaminación al medio ambiente y la agresión a la salud por inhalación de ésta. Se dan los resultados de la caracterización física de dos compuestos de nanosílice comerciales mediante los métodos de la caracterización de aditivos y el empleo de la microscopia para la determinación de compuestos fundamentales, de sus actividades puzolánicas en morteros, así como la determinación de la absorción capilar, velocidad ultrasónica, masa volumétrica, coeficientes de resistencia a la penetración de agua, coeficiente de absorción de agua y porosidad efectiva en hormigones elaborados con los compuestos evaluados y en hormigones con aditivos superplastificantes y tobas zeolitizadas como patrones de comparación. Los valores demuestran un mejor comportamiento de durabilidad en los hormigones elaborados con nanosílice.Palabras Clave: nanotecnología; nanosílice; microsílice; aditivos químicos; adiciones.ABSTRACTNanosilice based in nanometric amorphous silica is one of the aplications of nanotechnology in the building industry, that has the same use than microsilica, but with the advantage that it does not produce environmental pollution or respiratory complains due to inhalation. We give the results of the physical characterization of two commercial nanosilice compounds by the admixtures characterization methods and electronic microscopy analysis to determine the fundamental compound, its pozzolanic activity in mortars, as well as its capillary absorption, ultrasonic pulse speed, volumetric mass, water penetration resistance coefficient, water absorption coefficient and effective porosity in concrete with nanosilice and in ordinary concrete with natural pozzolans and superplasticizer admixtures like comparative patterns. Results show a better behavior of durability in concretes with nanosilice.Keywords: nanotechnology; nanosilica; microsilica; chemical admixtures; additions.

Effective Porosity Comparison with a Lime Mortar Matrix Base during 350 to 700 Days

2017 ◽  
Vol 902 ◽  
pp. 60-64
Author(s):  
Judith Alejandra Velázquez Perez ◽  
Wilfrido Martínez Molina ◽  
Hugo Luis Chávez García ◽  
Elia Mercedes Alonso Guzmán ◽  
Rosalía Ruiz Ruiz
Keyword(s):  
Powder Material ◽  
Effective Porosity ◽  
Capillary Absorption ◽  
Powder Materials ◽  
Maize Starch ◽  
Lime Mortar ◽  
Historical Sites ◽  
Matrix Base ◽  
Weight Proportion ◽  
Mortar Matrix

This research is an investigation about the use of powder material additions with mortars lime base for a possible implementation in construction and/or restoration of historical sites. Mortars were elaborated in laboratory conditions with a 1:2.5 in weight proportion. One of the proofs to which these mortars were submitted was the test of capillary absorption; this way, the influence of the materials added to powder in these mortars determined porosity. Mortars were made with different percentages of materials. These powder materials are brick manufacturing ash, quarry powder, clay and maize starch. The test was run during 350 to 700 days. It obtained better results with 700 days than with 350 days.

scholarly journals Emerging techniques in the isolation and characterization of extracellular vesicles and their roles in cancer diagnostics and prognostics

The Analyst ◽  
2016 ◽  
Vol 141 (2) ◽  
pp. 371-381 ◽  
Author(s):  
Vijaya Sunkara ◽  
Hyun-Kyung Woo ◽  
Yoon-Kyoung Cho
Keyword(s):  
Extracellular Vesicles ◽  
Cancer Diagnostics ◽  
Clinical Implementation ◽  
Characterization Methods ◽  
Cancer Management ◽  
Isolation And Characterization

We present an overview of current isolation, detection, and characterization methods of extracellular vesicles and their applications and limitations as a potential emerging biomarker in cancer management and their clinical implementation.

Capillary water absorption by a porous cylinder

2017 ◽  
Vol 42 (2) ◽  
pp. 120-124 ◽  
Author(s):  
Christopher Hall
Keyword(s):  
Radial Flow ◽  
Effective Porosity ◽  
Capillary Absorption ◽  
Porous Cylinder ◽  
Capillary Water ◽  
Cylinder Axis ◽  
Flow Through ◽  
Front Model ◽  
Sharp Front ◽  
Good Agreement

Capillary absorption (imbibition) of water by a porous cylinder is described by means of a Sharp-Front model. The cumulative absorption increases as (time)1/2 at early times, but more slowly as the wet front approaches the cylinder axis. Results are given in terms of dimensionless variables. Experimental data on plaster cylinders are in good agreement with theory. Estimates of the sorptivity and effective porosity of the material can be obtained. The model may be useful in testing drilled cores and may also be applied to radial flow through the wall of a porous tube (hence to conduits and arches).

Unified Rotational and Translational Stiffness Characterization of Compliant Shell Mechanisms

2018 ◽  
Author(s):  
Joost R. Leemans ◽  
Charles J. Kim ◽  
Werner W. P. J. van de Sande ◽  
Just L. Herder
Keyword(s):  
Degrees Of Freedom ◽  
Compliant Mechanisms ◽  
Screw Theory ◽  
Characterization Methods ◽  
Six Degrees Of Freedom ◽  
Thin Walled Structures ◽  
Spatial Mechanisms ◽  
Eigen Decomposition ◽  
Comprehensive Characterization

Compliant shell mechanisms utilize spatially curved thin-walled structures to transfer or transmit force, motion or energy through elastic deformation. To design with spatial mechanisms designers need comprehensive characterization methods, while existing methods fall short of meaningful comparisons between rotational and translational degrees of freedom. This paper presents two approaches, both of which are based on the principle of virtual loads and potential energy, utilizing properties of screw theory, Plücker coordinates and an eigen-decomposition, leading to two unification lengths that can be used to compare and visualize all six degrees of freedom directions and magnitudes of compliant mechanisms in a non-arbitrary physically meaningful manner.

scholarly journals Characterization of reservoir sands using 3D seismic attributes in the coastal swamp area of Niger Delta Basin

2021 ◽  
Author(s):  
Oluwatoyin Khadijat Olaleye ◽  
Pius Adekunle Enikanselu ◽  
Michael Ayuk Ayuk
Keyword(s):  
Seismic Data ◽  
Niger Delta ◽  
Seismic Attributes ◽  
Effective Porosity ◽  
High Porosity ◽  
Hydrocarbon Accumulation ◽  
3D Seismic ◽  
Seismic Attribute ◽  
Niger Delta Basin

AbstractHydrocarbon accumulation and production within the Niger Delta Basin are controlled by varieties of geologic features guided by the depositional environment and tectonic history across the basin. In this study, multiple seismic attribute transforms were applied to three-dimensional (3D) seismic data obtained from “Reigh” Field, Onshore Niger Delta to delineate and characterize geologic features capable of harboring hydrocarbon and identifying hydrocarbon productivity areas within the field. Two (2) sand units were delineated from borehole log data and their corresponding horizons were mapped on seismic data, using appropriate check-shot data of the boreholes. Petrophysical summary of the sand units revealed that the area is characterized by high sand/shale ratio, effective porosity ranged from 16 to 36% and hydrocarbon saturation between 72 and 92%. By extracting attribute maps of coherence, instantaneous frequency, instantaneous amplitude and RMS amplitude, characterization of the sand units in terms of reservoir geomorphological features, facies distribution and hydrocarbon potential was achieved. Seismic attribute results revealed (1) characteristic patterns of varying frequency and amplitude areas, (2) major control of hydrocarbon accumulation being structural, in terms of fault, (3) prospective stratigraphic pinch-out, lenticular thick hydrocarbon sand, mounded sand deposit and barrier bar deposit. Seismic Attributes analysis together with seismic structural interpretation revealed prospective structurally high zones with high sand percentage, moderate thickness and high porosity anomaly at the center of the field. The integration of different seismic attribute transforms and results from the study has improved our understanding of mapped sand units and enhanced the delineation of drillable locations which are not recognized on conventional seismic interpretations.

Non-Destructive Tests as Durability Indicators in Cement Mortars with Pozzolanic Substitutions

2017 ◽  
Vol 902 ◽  
pp. 9-13
Author(s):  
Rosalía Ruiz Ruiz ◽  
Elia Mercedes Alonso Guzmán ◽  
Wilfrido Martínez Molina ◽  
Hugo Luis Chávez García ◽  
Judith Alejandra Velázquez Perez
Keyword(s):  
Mechanical Characteristics ◽  
Ultrasonic Pulse Velocity ◽  
Good Alternative ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Cement Industry ◽  
Capillary Absorption ◽  
Pozzolanic Material ◽  
Cement Mortars ◽  
Non Destructive

Cement industry is responsible of 5-7% of CO2 emissions to the atmosphere. This is preoccupant because this is one of the greenhouse effect gases which cause global warming. Pozzolanic material incorporation in cement mortars elaboration represents a good alternative to partially substitute cement, since its chemical composition could contribute to improvement of its durability and mechanical characteristics. In this research, mortars with pozzolanic substitutions are evaluated through non-destructive tests as: capillary absorption, electrical resistivity, and ultrasonic pulse velocity to the age of 1000 days. The results suggested that the incorporation of pozzolanic material as partial substitutes of Portland cement increases the mortars properties mainly in substitutions of CBC 20%, PN 10, and 30%.

Multiscale characterization of pore structure in carbonate formations: Application to the Scurry Area Canyon Reef Operators Committee Unit

2016 ◽  
Vol 4 (2) ◽  
pp. SF165-SF177 ◽  
Author(s):  
Emmanuel Oyewole ◽  
Mehrnoosh Saneifar ◽  
Zoya Heidari
Keyword(s):  
Pore Structure ◽  
Pore Network ◽  
Effective Porosity ◽  
Well Log ◽  
Porosity And Permeability ◽  
Network Properties ◽  
Log Domain ◽  
Carbonate Formations ◽  
Pore Types

Carbonate formations consist of a wide range of pore types with different shapes, pore-throat sizes, and varying levels of pore-network connectivity. Such heterogeneous pore-network properties affect the fluid flow in the formation. However, characterizing pore-network properties (e.g., effective porosity and permeability) in carbonate formations is challenging due to the heterogeneity at different scales and complex pore structure of carbonate rocks. We have developed an integrated technique for multiscale characterization of carbonate pore structure based on mercury injection capillary pressure (MICP) measurements, X-ray micro-computed tomography (micro-CT) 3D rock images, and well logs. We have determined pore types based on the pore-throat radius distributions obtained from MICP measurements. We developed a new method for improved assessment of effective porosity and permeability in the well-log domain using pore-scale numerical simulations of fluid flow and electric current flow in 3D micro-CT core images obtained in each pore type. Finally, we conducted petrophysical rock classification based on the depth-by-depth estimates of effective porosity, permeability, volumetric concentrations of minerals, and pore types using an unsupervised artificial neural network. We have successfully applied the proposed technique to three wells in the Scurry Area Canyon Reef Operators Committee (SACROC ) Unit. Our results find that electrical resistivity measurements can be used for reliable characterization of pore structure and assessment of effective porosity and permeability in carbonate formations. The estimates of permeability in the well-log domain were cross-validated using the available core measurements. We have observed a 34% improvement in relative errors in well-log-based estimates of permeability, as compared with the core-based porosity-permeability models.

Characterization of Building Stones Involved in Historical Masonry

2011 ◽  
Vol 324 ◽  
pp. 388-391 ◽  
Author(s):  
Zbyšek Pavlík ◽  
Eva Vejmelková ◽  
Milena Pavlíková ◽  
Martin Keppert ◽  
Robert Černý
Keyword(s):  
Mercury Porosimetry ◽  
Moisture Diffusivity ◽  
Water Vapor Transport ◽  
Historical Buildings ◽  
Water Absorption Coefficient ◽  
The Czech Republic ◽  
Vacuum Saturation ◽  
Historical Masonry ◽  
Saturation Method

Basic physical properties, pore size distribution and hygric properties of several types of stones which are used in reconstructions of historical buildings on the territory of the Czech Republic, namely several types of sandstone and argillite, are investigated. Basic physical characteristics are measured using the water vacuum saturation method, pore distribution by mercury porosimetry. Values of water absorption coefficient and apparent moisture diffusivity are determined by methods utilizing the results of water sorptivity measurements. Water vapor transport properties are accessed by the cup method. The obtained data represents valuable information for the application of studied materials in reconstructions and renewal of historical buildings.

Nanophotonic Rigid Contact Lenses: Engineering and Characterization

2013 ◽  
Vol 633 ◽  
pp. 239-252
Author(s):  
Đuro Koruga ◽  
Dragomir Stamenković ◽  
Ivan Djuricic ◽  
Ivana Mileusnic ◽  
Jovana Šakota ◽  
...  
Keyword(s):  
Contact Lens ◽  
Materials Science ◽  
Contact Lenses ◽  
Base Material ◽  
Material Structure ◽  
Exclusion Zone ◽  
Characterization Methods ◽  
Rigid Contact ◽  
Complex Engineering

Contact lenses are a common optical aid to provide help with refractive anomalies of the human eye. Construction of contact lenses is a complex engineering task as it requires knowledge of optics, materials science, production and characterization methods for product quality. Besides correcting refractive anomalies, by using contact lenses it is possible to change the characteristics of light through the manipulation of material structure properties. Nanomaterials, such as fullerene C60, are candidates for the medium that interacts with light, thus changing its properties. During material syntheses for contact lenses, fullerenes are added to the base material and optical characteristics of the new nanophotonic material are compared with the base material. The engineering, manufacture and characterization of both a commercial and a new nanophotonic contact lens is presented in this paper. The interaction of water with both base and nanophotonic contact lens materials is described. Using experimental techniques, the phenomena of an exclusion zone (EZ) is also identified.

Characterization of Banana Fibers Functional Groups by Infrared Spectroscopy

2014 ◽  
Vol 775-776 ◽  
pp. 250-254 ◽  
Author(s):  
Sergio Neves Monteiro ◽  
Frederico Muylaert Margem ◽  
Rômulo Leite Loiola ◽  
Foluke Salgado de Assis ◽  
Michel Picanço Oliveira
Keyword(s):  
Infrared Spectroscopy ◽  
Functional Groups ◽  
Natural Fibers ◽  
Chemical Properties ◽  
Microscopic Analysis ◽  
Banana Fiber ◽  
Characterization Methods ◽  
Actual Application ◽  
Banana Fibers

A number of methods are available for characterization of the structural, physical, and chemical properties of natural fibers. Various methods are used for fiber identification like microscopic analysis, solubility, heating and burning technique density, staining etc. End-use property characterization methods often involve use of laboratory techniques which are adapted to simulate actual application as composite reinforcement. One of the techniques used on this kind of studies is the infrared spectroscopy. In fact, Fourier Transform Infrared (FTIR) spectroscopy is a valuable tool in the determination of functional groups actively interacting within a fiber. In this work, the banana fiber was evaluated by FTIR to reveal these functional groups and compare to similar works on other different types of banana fibers.

Sign in / Sign up

Export Citation Format

Share Document