scholarly journals Fast Anther Dehiscence Status Recognition System Establishing by Deep Learning to Screen Heat Tolerant Cotton

2021 ◽  
Author(s):  
Zhihao Tan ◽  
Jiawei Shi ◽  
Rongjie Lv ◽  
Qingyuan Li ◽  
Jing Yang ◽  
...  
Keyword(s):  
Deep Learning ◽  
Recognition System ◽  
Reproductive Organs ◽  
Detection Accuracy ◽  
Learning Technology ◽  
Anther Dehiscence ◽  
Accurate Identification ◽  
Manual Method ◽  
Improved Model ◽  
Status Recognition

Abstract BackgroundCotton is one of the most economically important crops in the world. The fertility of male reproductive organs is a key determinant of cotton yield. The anther dehiscence or indehiscence directly determine the probability of fertilization in cotton. Thus, the rapid and accurate identification of cotton anther dehiscence status is important for judging anther growth status and promoting genetic breeding research. The development of computer vision technology and the advent of big data have prompted the application of deep learning techniques to agricultural phenotype research. Therefore, two deep learning models (Faster R-CNN and YOLOv5) were proposed to detect the number and dehiscence status of anthers. ResultThe single-stage model based on YOLOv5 has higher recognition efficiency and the ability to deploy to the mobile end. Breeding researchers can apply this model to terminals to achieve a more intuitive understanding of cotton anther dehiscence status. Moreover, three improvement strategies of Faster R-CNN model were proposed, the improved model has higher detection accuracy than YOLOv5 model. We have made four improvements to the Faster R-CNN model and after the ensemble of the four models, R2 of “open” reaches 0.8765, R2 of “close” reaches 0.8539, R2 of “all” reaches 0.8481, higher than the prediction result of either model alone, and can completely replace the manual counting method. We can use this model to quickly extract the dehiscence rate of cotton anther under high temperature (HT) condition. In addition, the percentage of dehiscent anther of randomly selected 30 cotton varieties were observed from cotton population under normal conditions and HT conditions through the ensemble of Faster R-CNN model and manual observation. The result showed HT varying decreased the percentage of dehiscent anther in different cotton lines, consistent with the manual method. ConclusionsThe deep learning technology first time been applied to cotton anther dehiscence status recognition instead of manual method to quickly screen the HT tolerant cotton varieties and can help to explore the key genetic improvement genes in the future, promote cotton breeding and improvement.

scholarly journals Fast anther dehiscence state recognition system establishing by deep learning to screen heat tolerant cotton

2021 ◽  
Author(s):  
Zhihao Tan ◽  
Jiawei Shi ◽  
Rongjie Lv ◽  
Qingyuan Li ◽  
Jing Yang ◽  
...  
Keyword(s):  
Deep Learning ◽  
Recognition System ◽  
Reproductive Organs ◽  
Detection Accuracy ◽  
Anther Dehiscence ◽  
Accurate Identification ◽  
State Recognition ◽  
Learning Techniques ◽  
Computer Vision Technology ◽  
Improved Model

Cotton is one of the most economically important crops in the world. The fertility of male reproductive organs is a key determinant of cotton yield. The anther dehiscence or indehiscence directly determine the probability of fertilization in cotton. Thus, the rapid and accurate identification of cotton anther dehiscence status is important for judging anther growth status and promoting genetic breeding research. The development of computer vision technology and the advent of big data have prompted the application of deep learning techniques to agricultural phenotype research. Therefore, two deep learning models (Faster R-CNN and YOLOv5) were proposed to detect the number and dehiscence status of anthers. The single-stage model based on YOLOv5 has higher recognition efficiency and the ability to deploy to the mobile end. Breeding researchers can apply this model to terminals to achieve a more intuitive understanding of cotton anther dehiscence status. Moreover, three improvement strategies of Faster R-CNN model were proposed, the improved model has higher detection accuracy than YOLOv5 model. In addition, the percentage of dehiscent anther of randomly selected 30 cotton varieties were observed from cotton population under normal temperature and high temperature (HT) conditions through the integrated Faster R-CNN model and manual observation. The result showed HT varying decreased the percentage of dehiscent anther in different cotton lines, consistent with the manual method. Thus, this system can help us to rapid and accurate identification of HT-tolerant cotton.

scholarly journals Deep-Learning-Based Pupil Center Detection and Tracking Technology for Visible-Light Wearable Gaze Tracking Devices

2021 ◽  
Vol 11 (2) ◽  
pp. 851
Author(s):  
Wei-Liang Ou ◽  
Tzu-Ling Kuo ◽  
Chin-Chieh Chang ◽  
Chih-Peng Fan
Keyword(s):  
Deep Learning ◽  
Visible Light ◽  
Tracking System ◽  
Recall Rate ◽  
Detection Accuracy ◽  
Learning Technology ◽  
Tracking Errors ◽  
Gaze Tracking ◽  
Detection Technology ◽  
Pupil Tracking

In this study, for the application of visible-light wearable eye trackers, a pupil tracking methodology based on deep-learning technology is developed. By applying deep-learning object detection technology based on the You Only Look Once (YOLO) model, the proposed pupil tracking method can effectively estimate and predict the center of the pupil in the visible-light mode. By using the developed YOLOv3-tiny-based model to test the pupil tracking performance, the detection accuracy is as high as 80%, and the recall rate is close to 83%. In addition, the average visible-light pupil tracking errors of the proposed YOLO-based deep-learning design are smaller than 2 pixels for the training mode and 5 pixels for the cross-person test, which are much smaller than those of the previous ellipse fitting design without using deep-learning technology under the same visible-light conditions. After the combination of calibration process, the average gaze tracking errors by the proposed YOLOv3-tiny-based pupil tracking models are smaller than 2.9 and 3.5 degrees at the training and testing modes, respectively, and the proposed visible-light wearable gaze tracking system performs up to 20 frames per second (FPS) on the GPU-based software embedded platform.

scholarly journals Application of Color Featuring and Deep Learning in Maize Plant Detection

2020 ◽  
Vol 12 (14) ◽  
pp. 2229
Author(s):  
Haojie Liu ◽  
Hong Sun ◽  
Minzan Li ◽  
Michihisa Iida
Keyword(s):  
Deep Learning ◽  
False Negative ◽  
Color Space ◽  
Performance Comparison ◽  
Maize Plant ◽  
Detection Accuracy ◽  
Learning Technology ◽  
Practical Applications ◽  
Feature Based ◽  
Detection Speed

Maize plant detection was conducted in this study with the goals of target fertilization and reduction of fertilization waste in weed spots and gaps between maize plants. The methods used included two types of color featuring and deep learning (DL). The four color indices used were excess green (ExG), excess red (ExR), ExG minus ExR, and the hue value from the HSV (hue, saturation, and value) color space, while the DL methods used were YOLOv3 and YOLOv3_tiny. For practical application, this study focused on performance comparison in detection accuracy, robustness to complex field conditions, and detection speed. Detection accuracy was evaluated by the resulting images, which were divided into three categories: true positive, false positive, and false negative. The robustness evaluation was performed by comparing the average intersection over union of each detection method across different sub–datasets—namely original subset, blur processing subset, increased brightness subset, and reduced brightness subset. The detection speed was evaluated by the indicator of frames per second. Results demonstrated that the DL methods outperformed the color index–based methods in detection accuracy and robustness to complex conditions, while they were inferior to color feature–based methods in detection speed. This research shows the application potential of deep learning technology in maize plant detection. Future efforts are needed to improve the detection speed for practical applications.

scholarly journals Deploying Machine and Deep Learning Models for Efficient Data-Augmented Detection of COVID-19 Infections

Viruses ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 769 ◽  
Author(s):  
Ahmed Sedik ◽  
Abdullah M Iliyasu ◽  
Basma Abd El-Rahiem ◽  
Mohammed E. Abdel Samea ◽  
Asmaa Abdel-Raheem ◽  
...  
Keyword(s):  
Deep Learning ◽  
Data Augmentation ◽  
Short Term Memory ◽  
Machine Learning Techniques ◽  
Detection Accuracy ◽  
Testing Time ◽  
Learning Models ◽  
Accurate Identification ◽  
Infected People ◽  
Corona Virus

This generation faces existential threats because of the global assault of the novel Corona virus 2019 (i.e., COVID-19). With more than thirteen million infected and nearly 600000 fatalities in 188 countries/regions, COVID-19 is the worst calamity since the World War II. These misfortunes are traced to various reasons, including late detection of latent or asymptomatic carriers, migration, and inadequate isolation of infected people. This makes detection, containment, and mitigation global priorities to contain exposure via quarantine, lockdowns, work/stay at home, and social distancing that are focused on “flattening the curve”. While medical and healthcare givers are at the frontline in the battle against COVID-19, it is a crusade for all of humanity. Meanwhile, machine and deep learning models have been revolutionary across numerous domains and applications whose potency have been exploited to birth numerous state-of-the-art technologies utilised in disease detection, diagnoses, and treatment. Despite these potentials, machine and, particularly, deep learning models are data sensitive, because their effectiveness depends on availability and reliability of data. The unavailability of such data hinders efforts of engineers and computer scientists to fully contribute to the ongoing assault against COVID-19. Faced with a calamity on one side and absence of reliable data on the other, this study presents two data-augmentation models to enhance learnability of the Convolutional Neural Network (CNN) and the Convolutional Long Short-Term Memory (ConvLSTM)-based deep learning models (DADLMs) and, by doing so, boost the accuracy of COVID-19 detection. Experimental results reveal improvement in terms of accuracy of detection, logarithmic loss, and testing time relative to DLMs devoid of such data augmentation. Furthermore, average increases of 4% to 11% in COVID-19 detection accuracy are reported in favour of the proposed data-augmented deep learning models relative to the machine learning techniques. Therefore, the proposed algorithm is effective in performing a rapid and consistent Corona virus diagnosis that is primarily aimed at assisting clinicians in making accurate identification of the virus.

scholarly journals CropDeep: The Crop Vision Dataset for Deep-Learning-Based Classification and Detection in Precision Agriculture

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1058 ◽  
Author(s):  
Yang-Yang Zheng ◽  
Jian-Lei Kong ◽  
Xue-Bo Jin ◽  
Xiao-Yi Wang ◽  
Min Zuo
Keyword(s):  
Deep Learning ◽  
Precision Agriculture ◽  
Production Efficiency ◽  
State Of The Art ◽  
Detection Accuracy ◽  
Similar Species ◽  
Learning Technology ◽  
Well Performance ◽  
Species Classification ◽  
Domain Specific

Intelligence has been considered as the major challenge in promoting economic potential and production efficiency of precision agriculture. In order to apply advanced deep-learning technology to complete various agricultural tasks in online and offline ways, a large number of crop vision datasets with domain-specific annotation are urgently needed. To encourage further progress in challenging realistic agricultural conditions, we present the CropDeep species classification and detection dataset, consisting of 31,147 images with over 49,000 annotated instances from 31 different classes. In contrast to existing vision datasets, images were collected with different cameras and equipment in greenhouses, captured in a wide variety of situations. It features visually similar species and periodic changes with more representative annotations, which have supported a stronger benchmark for deep-learning-based classification and detection. To further verify the application prospect, we provide extensive baseline experiments using state-of-the-art deep-learning classification and detection models. Results show that current deep-learning-based methods achieve well performance in classification accuracy over 99%. While current deep-learning methods achieve only 92% detection accuracy, illustrating the difficulty of the dataset and improvement room of state-of-the-art deep-learning models when applied to crops production and management. Specifically, we suggest that the YOLOv3 network has good potential application in agricultural detection tasks.

scholarly journals Research on Network Security Application Based on Deep Learning

CONVERTER ◽  
2021 ◽  
pp. 598-605
Author(s):  
Zhao Jianchao
Keyword(s):  
Deep Learning ◽  
Learning Algorithm ◽  
Rapid Development ◽  
Internet Security ◽  
Detection Accuracy ◽  
Data Sets ◽  
Learning Technology ◽  
Data Set ◽  
Deep Learning Algorithm ◽  
Internet Industry

Behind the rapid development of the Internet industry, Internet security has become a hidden danger. In recent years, the outstanding performance of deep learning in classification and behavior prediction based on massive data makes people begin to study how to use deep learning technology. Therefore, this paper attempts to apply deep learning to intrusion detection to learn and classify network attacks. Aiming at the nsl-kdd data set, this paper first uses the traditional classification methods and several different deep learning algorithms for learning classification. This paper deeply analyzes the correlation among data sets, algorithm characteristics and experimental classification results, and finds out the deep learning algorithm which is relatively good at. Then, a normalized coding algorithm is proposed. The experimental results show that the algorithm can improve the detection accuracy and reduce the false alarm rate.

Su1737 - Novel Computer-Aided Recognition System Applying Deep Learning Technology for Verification of Cecal Intubation

2018 ◽  
Vol 154 (6) ◽  
pp. S-572
Author(s):  
Han-Mo Chiu ◽  
Yi-Hsuan Chou ◽  
Po-Yen Lu ◽  
Pei-Chun Lin ◽  
Shuo-Hong Hung ◽  
...  
Keyword(s):  
Deep Learning ◽  
Recognition System ◽  
Learning Technology ◽  
Cecal Intubation ◽  
Computer Aided

scholarly journals Identification of Apple Tree Leaf Diseases Based on Deep Learning Models

Symmetry ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1065
Author(s):  
Xiaofei Chao ◽  
Guoying Sun ◽  
Hongke Zhao ◽  
Min Li ◽  
Dongjian He
Keyword(s):  
Neural Network ◽  
Deep Learning ◽  
Early Diagnosis ◽  
Convolutional Neural Network ◽  
Apple Tree ◽  
Support Vector ◽  
Detection Accuracy ◽  
Accurate Identification ◽  
Tree Leaf ◽  
Spread Of Infection

Early diagnosis and accurate identification of apple tree leaf diseases (ATLDs) can control the spread of infection, to reduce the use of chemical fertilizers and pesticides, improve the yield and quality of apple, and maintain the healthy development of apple cultivars. In order to improve the detection accuracy and efficiency, an early diagnosis method for ATLDs based on deep convolutional neural network (DCNN) is proposed. We first collect the images of apple tree leaves with and without diseases from both laboratories and cultivation fields, and establish dataset containing five common ATLDs and healthy leaves. The DCNN model proposed in this paper for ATLDs recognition combines DenseNet and Xception, using global average pooling instead of fully connected layers. We extract features by the proposed convolutional neural network then use a support vector machine to classify the apple leaf diseases. Including the proposed DCNN, several DCNNs are trained for ATLDs recognition. The proposed network achieves an overall accuracy of 98.82% in identifying the ATLDs, which is higher than Inception-v3, MobileNet, VGG-16, DenseNet-201, Xception, VGG-INCEP. Moreover, the proposed model has the fastest convergence rate, and a relatively small number of parameters and high robustness compared with the mentioned models. This research indicates that the proposed deep learning model provides a better solution for ATLDs control. It could be also integrated into smart apple cultivation systems.

scholarly journals The Use of Deep Learning and VR Technology in Film and Television Production From the Perspective of Audience Psychology

2021 ◽  
Vol 12 ◽  
Author(s):  
Yangfan Tong ◽  
Weiran Cao ◽  
Qian Sun ◽  
Dong Chen
Keyword(s):  
Deep Learning ◽  
Image Recognition ◽  
Human Body ◽  
Recognition System ◽  
Detection Accuracy ◽  
Practical Applications ◽  
Television Production ◽  
Film And Television ◽  
Computing Performance ◽  
Tv Production

As the development of artificial intelligence (AI) technology, the deep-learning (DL)-based Virtual Reality (VR) technology, and DL technology are applied in human-computer interaction (HCI), and their impacts on modern film and TV works production and audience psychology are analyzed. In film and TV production, audiences have a higher demand for the verisimilitude and immersion of the works, especially in film production. Based on this, a 2D image recognition system for human body motions and a 3D recognition system for human body motions based on the convolutional neural network (CNN) algorithm of DL are proposed, and an analysis framework is established. The proposed systems are simulated on practical and professional datasets, respectively. The results show that the algorithm's computing performance in 2D image recognition is 7–9 times higher than that of the Open Pose method. It runs at 44.3 ms in 3D motion recognition, significantly lower than the Open Pose method's 794.5 and 138.7 ms. Although the detection accuracy has dropped by 2.4%, it is more efficient and convenient without limitations of scenarios in practical applications. The AI-based VR and DL enriches and expands the role and application of computer graphics in film and TV production using HCI technology theoretically and practically.

scholarly journals Adv-Plate Attack: Adversarially Perturbed Plate for License Plate Recognition System

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Hyun Kwon ◽  
Jang-Woon Baek
Keyword(s):  
Machine Learning ◽  
Neural Networks ◽  
Deep Learning ◽  
Deep Neural Networks ◽  
Recognition System ◽  
License Plate ◽  
Learning Technology ◽  
License Plate Recognition ◽  
Adversarial Examples ◽  
Adversarial Example

Deep learning technology has been used to develop improved license plate recognition (LPR) systems. In particular, deep neural networks have brought significant improvements in the LPR system. However, deep neural networks are vulnerable to adversarial examples. In the existing LPR system, adversarial examples study specific spots that are easily identifiable by humans or require human feedback. In this paper, we propose a method of generating adversarial examples in the license plate, which has no human feedback and is difficult to identify by humans. In the proposed method, adversarial noise is added only to the license plate among the entire image to create an adversarial example that is erroneously recognized by the LPR system without being identified by humans. Experiments were performed using the baza silka dataset, and TensorFlow was used as the machine learning library. When epsilon is 0.6 for the first type, and alpha and the iteration of the second type are 0.4 and 1000, respectively, the adversarial examples generated by the first and second type generation methods are reduced to 20% and 15% accuracy in the LPR system.

Sign in / Sign up

Export Citation Format

Share Document