scholarly journals Facilely Constructed Two-Sided Microstructure Interfaces Between Electrodes and Cellulose Paper Active Layer: Eco-Friendly, Low-Cost and High-Performance Piezoresistive Sensor

2021 ◽  
Author(s):  
Zaihua Duan ◽  
Yadong Jiang ◽  
Qi Huang ◽  
Si Wang ◽  
Qiuni Zhao ◽  
...  
Keyword(s):  
Active Layer ◽  
Pressure Sensor ◽  
High Performance ◽  
Raw Materials ◽  
Low Cost ◽  
Cellulose Paper ◽  
Piezoresistive Pressure Sensor ◽  
Piezoresistive Sensor ◽  
Complex Process ◽  
Sensing Performance

Abstract The microstructure plays an important role in improving the sensing performance of pressure sensor. However, the design of microstructural active layer of pressure sensor usually involves complex process and expensive raw materials. Herein, the common polyester conductive electrodes and cellulose paper that both have inherent microstructure surface are ingeniously combined to form two-sided microstructure interfaces for low-cost, eco-friendly and high-performance flexible piezoresistive pressure sensor. In order to obtain conductive and low-cost active layer paper, daily carbon ink, which is usually used for writing, is preferred as a conductive material. Meanwhile, we experimentally confirm that the proposed structure is also suitable for other conductive materials, such as carbon nanotubes. The results show that as-fabricated piezoresistive sensor has high pressure sensitivities of 5.54 and 1.61 kPa−1 in the wide linear ranges of 0.5−5 and 5−60 kPa, respectively, and good durability (5000 cycles under 2 kPa). The sensing mechanism of the piezoresistive sensor is analyzed by combining the characterization results and finite element simulation. Benefitting from the high sensing performance, the good flexibility and non-toxic property, the piezoresistive sensor is demonstrated for multiple wearable applications (e.g., wrist pulse, speech recognition, finger bending, abdominal respiration, counting steps, and pressure distribution). This work provides a simple and universal strategy for the design of piezoresistive sensor from the microstructure interfaces between electrodes and active layer.

scholarly journals An Ultrahigh Sensitive Paper-Based Pressure Sensor with Intelligent Thermotherapy for Skin-Integrated Electronics

Nanomaterials ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 2536
Author(s):  
Lin Gao ◽  
Junsheng Yu ◽  
Ying Li ◽  
Peiwen Wang ◽  
Jun Shu ◽  
...  
Keyword(s):  
Pressure Sensor ◽  
High Performance ◽  
Low Cost ◽  
Pressure Sensors ◽  
Fast Response ◽  
Integrated Electronics ◽  
Piezoresistive Pressure Sensor ◽  
Biomedical Diagnostics ◽  
Porous Microstructure ◽  
Ultrahigh Sensitivity

Porous microstructure pressure sensors that are highly sensitive, reliable, low-cost, and environment-friendly have aroused wide attention in intelligent biomedical diagnostics, human–machine interactions, and soft robots. Here, an all-tissue-based piezoresistive pressure sensor with ultrahigh sensitivity and reliability based on the bottom interdigitated tissue electrode and the top bridge of a microporous tissue/carbon nanotube composite was proposed. Such pressure sensors exhibited ultrahigh sensitivity (≈1911.4 kPa−1), fast response time (<5 ms), low fatigue of over 2000 loading/unloading cycles, and robust environmental degradability. These enabled sensors can not only monitor the critical physiological signals of the human body but also realize electrothermal conversion at a specific voltage, which enhances the possibility of creating wearable thermotherapy electronics for protecting against rheumatoid arthritis and cervical spondylosis. Furthermore, the sensor successfully transmitted wireless signals to smartphones via Bluetooth, indicating its potential as reliable skin-integrated electronics. This work provides a highly feasible strategy for promoting high-performance wearable thermotherapy electronics for the next-generation artificial skin.

scholarly journals Molecular design revitalizes the low-cost PTV-polymer for highly efficient organic solar cells

2021 ◽  
Author(s):  
Junzhen Ren ◽  
Pengqing Bi ◽  
Jianqi Zhang ◽  
Jiao Liu ◽  
Jingwen Wang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Organic Solar Cells ◽  
High Performance ◽  
Molecular Design ◽  
Raw Materials ◽  
Low Cost ◽  
Stable Conformation ◽  
Chemical Structures ◽  
Aggregation Effect ◽  
Industrialization Process

Abstract Developing photovoltaic materials with simple chemical structures and easy synthesis still remains a major challenge in the industrialization process of organic solar cells (OSCs). Herein, an ester substituted poly(thiophene vinylene) derivative, PTVT-T, was designed and synthesized in very few steps by adopting commercially available raw materials. The ester groups on the thiophene units enable PTVT-T to have a planar and stable conformation. Moreover, PTVT-T presents a wide absorption band and strong aggregation effect in solution, which are the key characteristics needed to realize high performance in non-fullerene-acceptor (NFA)-based OSCs. We then prepared OSCs by blending PTVT-T with three representative fullerene- and NF-based acceptors, PC71BM, IT-4F and BTP-eC9. It was found that PTVT-T can work well with all the acceptors, showing great potential to match new emerging NFAs. Particularly, a remarkable power conversion efficiency of 16.20% is achieved in a PTVT-T:BTP-eC9-based device, which is the highest value among the counterparts based on PTV derivatives. This work demonstrates that PTVT-T shows great potential for the future commercialization of OSCs.

Lignin-based polymers

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Fan Qi ◽  
Zhang Chaoqun ◽  
Yang Weijun ◽  
Wang Qingwen ◽  
Ou Rongxian
Keyword(s):  
High Performance ◽  
Raw Materials ◽  
Structural Characteristics ◽  
Low Cost ◽  
Polymer Matrices ◽  
Terrestrial Plants ◽  
Polyester Resins ◽  
Sustainable Resources ◽  
Reinforced Polymer ◽  
New Ideas

Abstract On the basis of the world’s continuing consumption of raw materials, there was an urgent need to seek sustainable resources. Lignin, the second naturally abundant biomass, accounts for 15–35% of the cell walls of terrestrial plants and is considered waste for low-cost applications such as thermal and electricity generation. The impressive characteristics of lignin, such as its high abundance, low density, biodegradability, antioxidation, antibacterial capability, and its CO2 neutrality and enhancement, render it an ideal candidate for developing new polymer/composite materials. In past decades, considerable works have been conducted to effectively utilize waste lignin as a component in polymer matrices for the production of high-performance lignin-based polymers. This chapter is intended to provide an overview of the recent advances and challenges involving lignin-based polymers utilizing lignin macromonomer and its derived monolignols. These lignin-based polymers include phenol resins, polyurethane resins, polyester resins, epoxy resins, etc. The structural characteristics and functions of lignin-based polymers are discussed in each section. In addition, we also try to divide various lignin reinforced polymer composites into different polymer matrices, which can be separated into thermoplastics, rubber, and thermosets composites. This chapter is expected to increase the interest of researchers worldwide in lignin-based polymers and develop new ideas in this field.

scholarly journals Nano Carbon Black-Based High Performance Wearable Pressure Sensors

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 664 ◽  
Author(s):  
Junsong Hu ◽  
Junsheng Yu ◽  
Ying Li ◽  
Xiaoqing Liao ◽  
Xingwu Yan ◽  
...  
Keyword(s):  
Carbon Black ◽  
Pressure Sensor ◽  
High Performance ◽  
Large Scale ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Wearable Electronics ◽  
Atmospheric Pollutant ◽  
Piezoresistive Pressure Sensor ◽  
Nano Carbon

The reasonable design pattern of flexible pressure sensors with excellent performance and prominent features including high sensitivity and a relatively wide workable linear range has attracted significant attention owing to their potential application in the advanced wearable electronics and artificial intelligence fields. Herein, nano carbon black from kerosene soot, an atmospheric pollutant generated during the insufficient burning of hydrocarbon fuels, was utilized as the conductive material with a bottom interdigitated textile electrode screen printed using silver paste to construct a piezoresistive pressure sensor with prominent performance. Owing to the distinct loose porous structure, the lumpy surface roughness of the fabric electrodes, and the softness of polydimethylsiloxane, the piezoresistive pressure sensor exhibited superior detection performance, including high sensitivity (31.63 kPa−1 within the range of 0–2 kPa), a relatively large feasible range (0–15 kPa), a low detection limit (2.26 pa), and a rapid response time (15 ms). Thus, these sensors act as outstanding candidates for detecting the human physiological signal and large-scale limb movement, showing their broad range of application prospects in the advanced wearable electronics field.

Preparation and characterization of low-cost high-performance mullite-quartz ceramic proppants for coal bed methane wells

2018 ◽  
Vol 25 (5) ◽  
pp. 957-961 ◽  
Author(s):  
Kaiyue Wang ◽  
Huijun Wang ◽  
Yi Zhou ◽  
Guomin Li ◽  
Yaqiao Wu ◽  
...  
Keyword(s):  
High Performance ◽  
Sintering Temperature ◽  
Raw Materials ◽  
Low Cost ◽  
Quartz Ceramic ◽  
Coal Bed ◽  
Coal Bed Methane ◽  
Sintering Process ◽  
Flow Mechanism

AbstractIn this study, the mullite-quartz-based proppants were successfully prepared by using the coal gangue as the raw materials. Then, the effects of the additive and the sintering temperature on the composition, microstructure, and properties of the proppants were investigated. Results showed that the proppants sintered at 1250°C with the 10 wt% bauxite additive presented the best performance, which was very close to that of the quartz-proppant, and met the operational requirements of the 52 MPa coal bed methane wells. The viscous flow mechanism of the liquid phase formed during the sintering process also promoted the arrangement of the grains, thus benefiting the densification and the strength of the proppants.

scholarly journals High-Sensitivity Flexible Pressure Sensor-Based 3D CNTs Sponge for Human–Computer Interaction

Polymers ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 3465
Author(s):  
Jianli Cui ◽  
Xueli Nan ◽  
Guirong Shao ◽  
Huixia Sun
Keyword(s):  
Pressure Sensor ◽  
High Performance ◽  
Large Scale ◽  
Low Cost ◽  
Pressure Sensors ◽  
Chemical Vapor ◽  
High Sensitivity ◽  
Wearable Electronics ◽  
Wide Range ◽  
Flexible Pressure Sensors

Researchers are showing an increasing interest in high-performance flexible pressure sensors owing to their potential uses in wearable electronics, bionic skin, and human–machine interactions, etc. However, the vast majority of these flexible pressure sensors require extensive nano-architectural design, which both complicates their manufacturing and is time-consuming. Thus, a low-cost technology which can be applied on a large scale is highly desirable for the manufacture of flexible pressure-sensitive materials that have a high sensitivity over a wide range of pressures. This work is based on the use of a three-dimensional elastic porous carbon nanotubes (CNTs) sponge as the conductive layer to fabricate a novel flexible piezoresistive sensor. The synthesis of a CNTs sponge was achieved by chemical vapor deposition, the basic underlying principle governing the sensing behavior of the CNTs sponge-based pressure sensor and was illustrated by employing in situ scanning electron microscopy. The CNTs sponge-based sensor has a quick response time of ~105 ms, a high sensitivity extending across a broad pressure range (less than 10 kPa for 809 kPa−1) and possesses an outstanding permanence over 4,000 cycles. Furthermore, a 16-pixel wireless sensor system was designed and a series of applications have been demonstrated. Its potential applications in the visualizing pressure distribution and an example of human–machine communication were also demonstrated.

scholarly journals Properties of Foamed Lightweight High-Performance Phosphogypsum-Based Ternary System Binder

2020 ◽  
Vol 10 (18) ◽  
pp. 6222 ◽  
Author(s):  
Girts Bumanis ◽  
Jelizaveta Zorica ◽  
Diana Bajare
Keyword(s):  
Ternary System ◽  
High Performance ◽  
Raw Materials ◽  
Low Cost ◽  
Construction Materials ◽  
Mineralogical Composition ◽  
Point Of View ◽  
Raw Material ◽  
Total Energy Consumption ◽  
And Performance

The potential of phosphogypsum (PG) as secondary raw material in construction industry is high if compared to other raw materials from the point of view of availability, total energy consumption, and CO2 emissions created during material processing. This work investigates a green hydraulic ternary system binder based on waste phosphogypsum (PG) for the development of sustainable high-performance construction materials. Moreover, a simple, reproducible, and low-cost manufacture is followed by reaching PG utilization up to 50 wt.% of the binder. Commercial gypsum plaster was used for comparison. High-performance binder was obtained and on a basis of it foamed lightweight material was developed. Low water-binder ratio mixture compositions were prepared. Binder paste, mortar, and foamed binder were used for sample preparation. Chemical, mineralogical composition and performance of the binder were evaluated. Results indicate that the used waste may be successfully employed to produce high-performance binder pastes and even mortars with a compression strength up to 90 MPa. With the use of foaming agent, lightweight (370–700 kg/m3) foam concrete was produced with a thermal conductivity from 0.086 to 0.153 W/mK. Water tightness (softening coefficient) of such foamed material was 0.5–0.64. Proposed approach represents a viable solution to reduce the environmental footprint associated with waste disposal.

Sign in / Sign up

Export Citation Format

Share Document