Preparation and optimization of Starch/Poly vinyl alcohol/ ZnO nanocomposite films applicable for food packaging

Abstract Pollution and destruction of the environment due to the accumulation of non-degradable plastics are some of the most important concerns in the world. A significant amount of this waste is related to the polymers used in food packaging. Therefore, in recent years, experts in the food industry have been looking for suitable biodegradable alternatives to synthetic polymers. Preparing biocompatible and biodegradable films based on starch is a good choice. In this study, various factors affecting films of starch/polyvinyl alcohol (PVA)/ containing ZnO nanoparticles such as the amount of starch, PVA, glycerol, and ZnO were evaluated by response surface methodology (RSM). Film formation, mechanical properties, swelling, solubility, and water vapor permeability (WVP) were selected as responses of RSM. The results showed that hydrogen bonding interactions between polyvinyl alcohol and starch improved the film formation. The effect of glycerol and PVA content on the mechanical strength was contrary to each other. As the amount of PVA increased, the tensile strength first decreased and then increased. The value of WVP was for all Runs from 0 to 6.77 × 10− 8 gm− 1s− 1Pa− 1. Finally, films with high film formation, maximum tensile strength, and high elongation at break, minimum solubility, permeability, and swelling were optimized.

Download Full-text

Improving the Performance of Feather Keratin/Polyvinyl Alcohol/Tris(hydroxymethyl)Aminomethane Nanocomposite Films by Incorporating Graphene Oxide or Graphene

Nanomaterials ◽

10.3390/nano10020327 ◽

2020 ◽

Vol 10 (2) ◽

pp. 327 ◽

Cited By ~ 1

Author(s):

Shufang Wu ◽

Xunjun Chen ◽

Tiehu Li ◽

Yingde Cui ◽

Minghao Yi ◽

...

Keyword(s):

Graphene Oxide ◽

Polyvinyl Alcohol ◽

Water Vapor Permeability ◽

Nanocomposite Films ◽

Light Transmittance ◽

Vapor Permeability ◽

Blend Films ◽

Feather Keratin ◽

Degradation Temperature ◽

Bionanocomposite Films

In this study, feather keratin/polyvinyl alcohol/tris(hydroxymethyl)aminomethane (FK/PVA/Tris) bionanocomposite films containing graphene oxide (GO) (0.5, 1, 2, and 3 wt%) or graphene (0.5, 1, 2, and 3 wt%) were prepared using a solvent casting method. The scanning electron microscopy results indicated that the dispersion of GO throughout the film matrix was better than that of graphene. The successful formation of new hydrogen bonds between the film matrix and GO was confirmed through the use of Fourier-transform infrared spectroscopy. The tensile strength, elastic modulus, and initial degradation temperature of the films increased, whereas the total soluble mass, water vapor permeability, oxygen permeability, and light transmittance decreased following GO or graphene incorporation. In summary, nanoblending is an effective method to promote the application of FK/PVA/Tris-based blend films in the packaging field.

Download Full-text

Improving Thermal, Mechanical, and Barrier Properties of Feather Keratin/Polyvinyl Alcohol/Tris(hydroxymethyl)aminomethane Nanocomposite Films by Incorporating Sodium Montmorillonite and TiO2

Nanomaterials ◽

10.3390/nano9020298 ◽

2019 ◽

Vol 9 (2) ◽

pp. 298 ◽

Cited By ~ 4

Author(s):

Shufang Wu ◽

Xunjun Chen ◽

Minghao Yi ◽

Jianfang Ge ◽

Guoqiang Yin ◽

...

Keyword(s):

Polyvinyl Alcohol ◽

Three Dimensional ◽

Water Vapor Permeability ◽

Barrier Properties ◽

Nanocomposite Films ◽

Light Transmittance ◽

Vapor Permeability ◽

Hydroxyl Groups ◽

Sodium Montmorillonite ◽

Feather Keratin

In this study, feather keratin/polyvinyl alcohol/tris(hydroxymethyl)aminomethane (FK/PVA/Tris) bionanocomposite films containing two types of nanoparticles, namely one-dimensional sodium montmorillonite (MMT) clay platelets (0.5, 1, 3, and 5 wt%) and three-dimensional TiO2 nanospheres (0.5, 1, 3, and 5 wt%), are prepared using solvent casting method. X-ray diffraction studies confirm the completely exfoliated structure of FK/PVA/Tris/MMT nanocomposites. The successful formation of new hydrogen bonds between the hydroxyl groups of the film matrix and the nanofillers is confirmed by Fourier transform infrared spectroscopy. The tensile strength, elongation at break, and initial degradation temperature of the films are enhanced after MMT and TiO2 incorporation. The water vapor permeability, oxygen permeability, and light transmittance decrease with increase in TiO2 and MMT contents. In summary, nanoblending is an effective method to promote the application of FK/PVA/Tris blend films in the packaging field.

Download Full-text

Ionic Liquids as Delaminating Agents of Layered Double Hydroxide during In-Situ Synthesis of Poly (Butylene Adipate-co-Terephthalate) Nanocomposites

Nanomaterials ◽

10.3390/nano9040618 ◽

2019 ◽

Vol 9 (4) ◽

pp. 618 ◽

Cited By ~ 4

Author(s):

Hynek Beneš ◽

Jana Kredatusová ◽

Jakub Peter ◽

Sébastien Livi ◽

Sonia Bujok ◽

...

Keyword(s):

Food Packaging ◽

Water Vapor Permeability ◽

Nanocomposite Films ◽

Precipitation Method ◽

Vapor Permeability ◽

Inorganic Particles ◽

In Situ Preparation ◽

End Use ◽

Co Precipitation

Currently, highly demanded biodegradable or bio-sourced plastics exhibit inherent drawbacks due to their limited processability and end-use properties (barrier, mechanical, etc.). To overcome all of these shortcomings, the incorporation of lamellar inorganic particles, such as layered double hydroxides (LDH) seems to be appropriate. However, LDH delamination and homogenous dispersion in a polymer matrix without use of harmful solvents, remains a challenging issue, which explains why LDH-based polymer nanocomposites have not been scaled-up yet. In this work, LDH with intercalated ionic liquid (IL) anions were synthesized by a direct co-precipitation method in the presence of phosphonium IL and subsequently used as functional nanofillers for in-situ preparation of poly (butylene adipate-co-terephthalate) (PBAT) nanocomposites. The intercalated IL-anions promoted LDH swelling in monomers and LDH delamination during the course of in-situ polycondensation, which led to the production of PBAT/LDH nanocomposites with intercalated and exfoliated morphology containing well-dispersed LDH nanoplatelets. The prepared nanocomposite films showed improved water vapor permeability and mechanical properties and slightly increased crystallization degree and therefore can be considered excellent candidates for food packaging applications.

Download Full-text

Preparation and Characterization of Corn Starch-Nanodiamond Composite Films

Applied Mechanics and Materials ◽

10.4028/www.scientific.net/amm.469.156 ◽

2013 ◽

Vol 469 ◽

pp. 156-161 ◽

Cited By ~ 8

Author(s):

Hong Pan ◽

Dan Xu ◽

Qin Liu ◽

Hui Qing Ren ◽

Min Zhou

Keyword(s):

Water Vapor ◽

Food Packaging ◽

Corn Starch ◽

Composite Films ◽

Water Vapor Permeability ◽

Nanocomposite Films ◽

Vapor Permeability ◽

Ft Ir ◽

Loading Amount ◽

Physical Blending

Starch-based nanocomposite films were fabricated by the incorporation of different amounts of nanodiamond (ND) particles. These films were characterized by SEM, FT-IR, TGA, tensile testing and water vapor permeability measurement. It was observed that at low loadings, ND dispersed well in starch matrix. However, as the loading amount increased, aggregates as large as several micrometers appeared. The physical blending of ND with starch didnt change the thermal degradation mechanisms of starch films, only increased the char residues. As the ND loading increased, the tensile strength of composite films increased but the elongation at break decreased. However, the water vapor permeability increased as the loading of ND increased due to the increased microspores in films. With further modifications, ND may be considered as a novel of biocompatible nanofillers for reinforcement of biopolymers for food packaging applications.

Download Full-text

Physical Properties of Composite Films from Tilapia Skin Collagen with Pachyrhizus Starch and Rambutan Peel Phenolics

Marine Drugs ◽

10.3390/md17120662 ◽

2019 ◽

Vol 17 (12) ◽

pp. 662

Author(s):

Yongliang Zhuang ◽

Shiyan Ruan ◽

Hanghang Yao ◽

Yun Sun

Keyword(s):

Tensile Strength ◽

Physical Properties ◽

Food Packaging ◽

Composite Films ◽

Water Vapor Permeability ◽

Amorphous Structure ◽

Vapor Permeability ◽

Scanning Calorimetry ◽

Active Food Packaging ◽

Skin Collagen

Different composite films composed of tilapia skin collagen (TSC) with Pachyrhizus starch (PS) or rambutan peel phenolics (RPP) were prepared, and the physical properties of these films were determined. The effects of PS and RPP on TSC films were investigated, and our results indicated that PS and RPP could improve the physical properties of TSC films. Opacity and film thickness showed an enhanced trend with increasing PS and RPP contents in TSC films, whereas solubility in water, elongation-at-break (EAB), and water vapor permeability (WVP) showed declining trends. TSC film with 10% PS and 0.5% RPP had the highest tensile strength, and the tensile strength dropped drastically when the content of PS and RPP increased. The light transmittances of the films could decrease with the incorporation of PS and RPP. Differential scanning calorimetry (DSC) demonstrated that the addition of PS and RPP improved the thermal stability of TSC films. In addition, X-ray diffraction indicated that the crystallinity of the films decreased and the amorphous structure of the films tended to become more complex with the addition of PS and RPP. As shown by fourier transform infrared spectroscopy (FTIR) analysis, PS and RPP can strongly interact with TSC, resulting in a modification of its structure. Scanning electron microscope (SEM) analysis showed that there was a good compatibility between TSC, PS, and RPP. The results indicated that TSC film incorporated with 10% PS and 0.5% RPP was an effective method for improve the physical properties of the film. TSC–PS–RPP composite films can be used not only in biomedical applications, but also as active food packaging materials.

Download Full-text

Active Biodegradable Polyvinyl Alcohol–Hemicellulose/Tea Polyphenol Films with Excellent Moisture Resistance Prepared via Ultrasound Assistance for Food Packaging

Coatings ◽

10.3390/coatings11020219 ◽

2021 ◽

Vol 11 (2) ◽

pp. 219

Author(s):

Yining Wang ◽

Jinhui Li ◽

Xin Guo ◽

Haisong Wang ◽

Fang Qian ◽

...

Keyword(s):

Water Vapor ◽

High Performance ◽

Food Packaging ◽

Composite Films ◽

Water Vapor Permeability ◽

Poly Vinyl Alcohol ◽

Vapor Permeability ◽

Moisture Resistance ◽

Film Material ◽

Strength Performance

Poor water-vapor barriers and mechanical properties are common problems of biobased films. To maintain food quality, the barrier and its strength performance need to be improved. Tea polyphenols (TP) are a natural active substance, and their benzene ring structure provides a barrier for them as a film material. Films that incorporate TP also have enriched functionalities, e.g., as antioxidants. Here, active poly (vinyl alcohol) (PVA)-hemicellulose (HC)/TP films with good moisture resistance and antioxidant capacity were prepared via ultrasound assistance. The effects of TP incorporation and ultrasonication on the physical, antioxidant, and micromorphological properties of the films were investigated. Results showed that the addition of TP improved the thermal stability and water-vapor permeability (WVP) of the composite films. When a PVA-HC/TP composite film with a PVA-HC to TP mass ratio of 100:10 was treated with ultrasonication for 45 min, tensile strength was 25.61 Mpa, which was increased by 54% from the film without any treatment, and water-vapor permeability (WVP) value declined from 49% to 4.29 × 10−12 g·cm/cm2·s·Pa. More importantly, the films’ DPPH scavenging activity increased to the maximal levels of 85.45%. In short, these observations create a feasible strategy for preparing high-performance biodegradable active-packaging films.

Download Full-text

Elucidating the Relationship Between Structure and Property of Waterborne Polyurethane-Cellulose Nanocrystals Nanocomposite Films

Science of Advanced Materials ◽

10.1166/sam.2020.3767 ◽

2020 ◽

Vol 12 (8) ◽

pp. 1213-1224

Author(s):

Ya-Yu Li ◽

Wei-Wen Jing ◽

Jian-Hua Wang ◽

Jun-Fang Li

Keyword(s):

Water Vapor ◽

Cellulose Nanocrystals ◽

Food Packaging ◽

Mechanical Performance ◽

Water Vapor Permeability ◽

Waterborne Polyurethane ◽

Optical Transmittance ◽

Nanocomposite Films ◽

Vapor Permeability ◽

Casting Technique

Cellulose nanocrystals (CNCs) are promising polymer reinforcements owning to their biocompatibility and high elastic modulus, low density, nano size, and inherent biocompatibility. The waterborne polyurethane-cellulose nanocrystals (WPU-CNCs) nanocomposite films were prepared using the conventional solvent casting technique over a whole composition. The mechanical performance, optical transmittance, amphiphilicity, water vapor permeability (WVP), and oxygen permeability (OP) of these WPU-CNCs films were evaluated. The incorporation of CNCs into WPU resulted in a significant enhancement of Young's modulus and tensile strength. The WVP of nanocomposite films had a lowest value at CNCs content of 50 wt.%. Upon the increase of CNCs content from 0 to 90 wt.%, the transmission path of oxygen molecular through the nanocomposite films became more tortuous, leading to drastic decrease in the OP. These WPU-CNCs nanocomposite films with high strength, optical transparency, water vapor and oxygen barrier properties have the potential applications in biomedical, furniture coating, and food packaging fields.

Download Full-text

Effect of Clay Nanofillers on the Mechanical and Water Vapor Permeability Properties of Xylan–Alginate Films

Polymers ◽

10.3390/polym12102279 ◽

2020 ◽

Vol 12 (10) ◽

pp. 2279

Author(s):

Darrel S. Naidu ◽

Maya J. John

Keyword(s):

Optical Properties ◽

Water Vapor ◽

Water Sorption ◽

Food Packaging ◽

Water Vapor Permeability ◽

Nanocomposite Films ◽

Vapor Permeability ◽

Solvent Casting ◽

Casting Technique ◽

Silicate Layers

In this study, xylan–alginate-based films were reinforced with nanoclays (bentonite or halloysite) by the solvent casting technique. The effect of the nanoclay loadings (1–5 wt %) on various properties—mechanical, optical, thermal, solubility, water sorption, and water vapor permeability (WVP)—of the xylan–alginate films were examined for their application as food packaging materials. A 5 wt % loading of either bentonite or halloysite resulted in a 49% decrease of the WVP due to the impermeable nature of the silicate layers that make up both bentonite and halloysite. Thermal stability and solubility of the nanocomposite films were not significantly influenced by the presence of the nanoclays, whereas the optical properties were significantly improved when compared to neat xylan–alginate blend. In general, films reinforced with bentonite exhibited superior mechanical and optical properties when compared to both halloysite-based nanocomposite and neat films.

Download Full-text

Starch–PVA Nanocomposite Film Incorporated with Cellulose Nanocrystals and MMT: A Comparative Study

International Journal of Food Engineering ◽

10.1515/ijfe-2015-0145 ◽

2016 ◽

Vol 12 (1) ◽

pp. 37-48 ◽

Cited By ~ 40

Author(s):

Nooshin Noshirvani ◽

Babak Ghanbarzadeh ◽

Hadi Fasihi ◽

Hadi Almasi

Keyword(s):

Thermal Properties ◽

Food Packaging ◽

Moisture Sorption ◽

Water Vapor Permeability ◽

Nanocrystalline Cellulose ◽

Nanocomposite Films ◽

Vapor Permeability ◽

Mechanical And Thermal Properties ◽

X Ray Diffraction ◽

Scanning Calorimetry

Abstract The goal of this work was to compare the barrier, mechanical, and thermal properties of two types of starch–polyvinyl alcohol (PVA) nanocomposites. Sodium montmorillonite (MMT) and nanocrystalline cellulose were chosen as nanoreinforcements. X-ray diffraction (XRD) test showed well-distributed MMT in the starch–PVA matrix, possibly implying that the clay nanolayers formed an exfoliated structure. The moisture sorption, solubility and water vapor permeability (WVP) studies revealed that the addition of MMT and nanocrystalline cellulose reduced the moisture affinity of starch–PVA biocomposite. At the level of 7 % MMT, the nanocomposite films showed the highest ultimate tensile strength (UTS) (4.93 MPa) and the lowest strain to break (SB) (57.65 %). The differential scanning calorimetry (DSC) results showed an improvement in thermal properties for the starch–PVA–MMT nanocomposites, but not for the starch–PVA–NCC nanocomposites. Results of this study demonstrated that the use of MMT in the fabrication of starch–PVA nanocomposites is more favorable than that of nanocrystalline cellulose to produce a desirable biodegradable film for food packaging applications.

Download Full-text

Chitosan/Polyvinyl Alcohol/SiO2 Nanocomposite Films: Physicochemical and Structural Characterization

Biointerface Research in Applied Chemistry ◽

10.33263/briac123.37253734 ◽

2021 ◽

Vol 12 (3) ◽

pp. 3725-3734

Keyword(s):

Polyvinyl Alcohol ◽

Physicochemical Properties ◽

Silicon Dioxide ◽

Water Solubility ◽

Light Transmission ◽

Water Vapor Permeability ◽

Nanocomposite Films ◽

Vapor Permeability ◽

Nano Sio2 ◽

Nano Silicon

In the present study, the effects of the two ratios of polyvinyl alcohol /Chitosan (1:1 and 3:1) and nano-silicon dioxide (nano-SiO2) (0, 0.5, and 1%) on structural and physicochemical properties of PVA/Chitosan/ nano-SiO2 nanocomposite films were investigated. Our findings showed that the treatments' water solubility (WS) in the presence of nano-SiO2 and higher PVA content was decreased, and the lowest amount was in P3C1-1% (59%). The addition of silica nanoparticles decreased the water vapor permeability (WVP) of films, and the lowest amount of WVP was for treatment with a ratio of 1:1 of PVA/chitosan and 1% nano-SiO2 (P3C1-1%) which was 3.08× 10-10 g m s-1m-2 Pa. Tensile strength (Ts) value was achieved 35.86 MPa in higher PVA content and 1% of nano-SiO2 (P3C1-1%) which was the highest. However, the light transmission value of all treatments did not differ greatly. According to the FTIR results, the appropriate interaction between both polymers and nano-SiO2 was observed in the concentration of 1% nano-SiO2 in P1C1. Eventually, significant improvement of structural and physicochemical properties of the films could achieve in higher PVA content and concentration of 1% of nano-SiO2. Based on these results, these nanocomposite films could be considered suitable for the packaging sector and preserve food quality.

Download Full-text