scholarly journals Physical Properties of Composite Films from Tilapia Skin Collagen with Pachyrhizus Starch and Rambutan Peel Phenolics

Marine Drugs ◽  
2019 ◽  
Vol 17 (12) ◽  
pp. 662
Author(s):  
Yongliang Zhuang ◽  
Shiyan Ruan ◽  
Hanghang Yao ◽  
Yun Sun
Keyword(s):  
Tensile Strength ◽  
Physical Properties ◽  
Food Packaging ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Amorphous Structure ◽  
Vapor Permeability ◽  
Scanning Calorimetry ◽  
Active Food Packaging ◽  
Skin Collagen

Different composite films composed of tilapia skin collagen (TSC) with Pachyrhizus starch (PS) or rambutan peel phenolics (RPP) were prepared, and the physical properties of these films were determined. The effects of PS and RPP on TSC films were investigated, and our results indicated that PS and RPP could improve the physical properties of TSC films. Opacity and film thickness showed an enhanced trend with increasing PS and RPP contents in TSC films, whereas solubility in water, elongation-at-break (EAB), and water vapor permeability (WVP) showed declining trends. TSC film with 10% PS and 0.5% RPP had the highest tensile strength, and the tensile strength dropped drastically when the content of PS and RPP increased. The light transmittances of the films could decrease with the incorporation of PS and RPP. Differential scanning calorimetry (DSC) demonstrated that the addition of PS and RPP improved the thermal stability of TSC films. In addition, X-ray diffraction indicated that the crystallinity of the films decreased and the amorphous structure of the films tended to become more complex with the addition of PS and RPP. As shown by fourier transform infrared spectroscopy (FTIR) analysis, PS and RPP can strongly interact with TSC, resulting in a modification of its structure. Scanning electron microscope (SEM) analysis showed that there was a good compatibility between TSC, PS, and RPP. The results indicated that TSC film incorporated with 10% PS and 0.5% RPP was an effective method for improve the physical properties of the film. TSC–PS–RPP composite films can be used not only in biomedical applications, but also as active food packaging materials.

Preparation and Characterization of Corn Starch-Nanodiamond Composite Films

2013 ◽  
Vol 469 ◽  
pp. 156-161 ◽  
Author(s):  
Hong Pan ◽  
Dan Xu ◽  
Qin Liu ◽  
Hui Qing Ren ◽  
Min Zhou
Keyword(s):  
Water Vapor ◽  
Food Packaging ◽  
Corn Starch ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Nanocomposite Films ◽  
Vapor Permeability ◽  
Ft Ir ◽  
Loading Amount ◽  
Physical Blending

Starch-based nanocomposite films were fabricated by the incorporation of different amounts of nanodiamond (ND) particles. These films were characterized by SEM, FT-IR, TGA, tensile testing and water vapor permeability measurement. It was observed that at low loadings, ND dispersed well in starch matrix. However, as the loading amount increased, aggregates as large as several micrometers appeared. The physical blending of ND with starch didnt change the thermal degradation mechanisms of starch films, only increased the char residues. As the ND loading increased, the tensile strength of composite films increased but the elongation at break decreased. However, the water vapor permeability increased as the loading of ND increased due to the increased microspores in films. With further modifications, ND may be considered as a novel of biocompatible nanofillers for reinforcement of biopolymers for food packaging applications.

scholarly journals Arrowroot Starch-Based Films Incorporated With a Carnauba Wax Nanoemulsion, Cellulose Nanocrystals, and Essential Oils: a New Functional Material for Food Packaging Applications

2021 ◽  
Author(s):  
Josemar Gonçalves de Oliveira Filho ◽  
Beatriz Regina Albiero ◽  
Lavínia Cipriano ◽  
Carmen Cris de Oliveira Nobre Bezerra ◽  
Fernanda Campos Alencar Oldoni ◽  
...  
Keyword(s):  
Water Vapor ◽  
Essential Oils ◽  
Cellulose Nanocrystals ◽  
Food Packaging ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Mentha Spicata ◽  
Carnauba Wax ◽  
Active Food Packaging ◽  
Arrowroot Starch

Abstract Arrowroot starch (AA)-based films incorporated with a carnauba wax nanoemulsion (CWN), cellulose nanocrystals (CNCs), and essential oils (EOs) from Mentha spicata (MEO) and Cymbopogon martinii (CEO) were produced using the casting technique and then characterized in terms of their water barrier, tensile, thermal, optical, and microstructural properties and in vitro antifungal activity against Rhizopus stolonifer and Botrytis cinerea. Whereas the incorporation of CNCs decreased the moisture content and water vapor permeability of the AA/CWN/CNC film, the additional incorporation of either EO decreased the transparency and affected the microstructure of the AA/CWN/CNC/EO nanocomposites. MEO and CEO incorporation improved the thermal stability of the films and provided excellent protection against fruit-spoiling fungi. Because of their excellent barrier properties against fungal growth, water vapor permeability, and ultraviolet and visible light, these AA/CWN/CNC/EO films have promising potential for application as active food packaging or coating materials.

scholarly journals Barrier Properties and Characterizations of Poly(lactic Acid)/ZnO Nanocomposites

Molecules ◽  
2020 ◽  
Vol 25 (6) ◽  
pp. 1310 ◽  
Author(s):  
Zhenya Tang ◽  
Fangling Fan ◽  
Zhuangzhuang Chu ◽  
Chunli Fan ◽  
Yuyue Qin
Keyword(s):  
Tensile Strength ◽  
Lactic Acid ◽  
Zno Nanoparticles ◽  
Food Packaging ◽  
Ternary Systems ◽  
Poly Lactic Acid ◽  
Vapor Permeability ◽  
Scanning Calorimetry ◽  
Electron Microscopic ◽  
Nano Zno

This study aimed to reinforce the barrier performance (i.e., oxygen–gas and water–vapor permeability) of poly(lactic acid) (PLA)-based films. Acetyltributylcitrate and zinc oxide nanoparticle (nano-ZnO), serving as plasticizer and nanofiller, respectively, were blended into a PLA matrix through a solvent-volatilizing method. The structural, morphological, thermal, and mechanical performances were then studied. Scanning electron microscopic images showed a significant dispersion of nano-ZnO in PLA ternary systems with low nano-ZnO content. The interaction between PLA matrix and ZnO nanoparticles was further analyzed by Fourier-transform infrared spectroscopy. Wide-angle X-ray scattering spectroscopy demonstrated high compatibility between PLA matrix and ZnO nanoparticles. Mechanical property studies revealed good tensile strength and low flexibility. Differential scanning calorimetry curves proved that an amorphous structure mostly existed in PLA ternary systems. The improvements in barrier property and tensile strength indicated that the PLA/nano-ZnO composite films could be used for food packaging application.

scholarly journals Active Biodegradable Polyvinyl Alcohol–Hemicellulose/Tea Polyphenol Films with Excellent Moisture Resistance Prepared via Ultrasound Assistance for Food Packaging

Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 219
Author(s):  
Yining Wang ◽  
Jinhui Li ◽  
Xin Guo ◽  
Haisong Wang ◽  
Fang Qian ◽  
...  
Keyword(s):  
Water Vapor ◽  
High Performance ◽  
Food Packaging ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Poly Vinyl Alcohol ◽  
Vapor Permeability ◽  
Moisture Resistance ◽  
Film Material ◽  
Strength Performance

Poor water-vapor barriers and mechanical properties are common problems of biobased films. To maintain food quality, the barrier and its strength performance need to be improved. Tea polyphenols (TP) are a natural active substance, and their benzene ring structure provides a barrier for them as a film material. Films that incorporate TP also have enriched functionalities, e.g., as antioxidants. Here, active poly (vinyl alcohol) (PVA)-hemicellulose (HC)/TP films with good moisture resistance and antioxidant capacity were prepared via ultrasound assistance. The effects of TP incorporation and ultrasonication on the physical, antioxidant, and micromorphological properties of the films were investigated. Results showed that the addition of TP improved the thermal stability and water-vapor permeability (WVP) of the composite films. When a PVA-HC/TP composite film with a PVA-HC to TP mass ratio of 100:10 was treated with ultrasonication for 45 min, tensile strength was 25.61 Mpa, which was increased by 54% from the film without any treatment, and water-vapor permeability (WVP) value declined from 49% to 4.29 × 10−12 g·cm/cm2·s·Pa. More importantly, the films’ DPPH scavenging activity increased to the maximal levels of 85.45%. In short, these observations create a feasible strategy for preparing high-performance biodegradable active-packaging films.

Ferulic Acid and its Oxide Enhance Performance of Soy Protein-Isolate/Chitosan Composite Films

2014 ◽  
Vol 716-717 ◽  
pp. 28-31
Author(s):  
Chao Zhang ◽  
Xiao Fei Guo ◽  
Yue Ma ◽  
Xiao Yan Zhao
Keyword(s):  
Tensile Strength ◽  
Soybean Protein ◽  
Soy Protein Isolate ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Protein Isolate ◽  
Vapor Permeability ◽  
Soybean Protein Isolate ◽  
Chitosan Composite ◽  
Thermal Stability Of

The effect of FA and OFA on performances of the soybean protein-isolate/chitosan composite films was evaluated. The FA and OFA enhanced the tensile strength and thermal stability of the composite films significantly, while they reduced the water vapor permeability to 60.3 % and 72.8 % of the control respectively. Moreover, the OFA was more effective to enhance the tensile strength of the composite films than the FA.

scholarly journals Experimental Investigation of The Properties of Laminated Nonwovens Used for Packaging of Powders in Mineral Warmers

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
E. Irzmańska ◽  
M. Jurczyk-Kowalska ◽  
M. Bil ◽  
M. Płocińska
Keyword(s):  
Differential Scanning Calorimetry ◽  
Experimental Investigation ◽  
Tensile Strength ◽  
Thermal Properties ◽  
Cold Work ◽  
Water Vapor Permeability ◽  
Mechanical Analysis ◽  
Vapor Permeability ◽  
Packaging Materials ◽  
Scanning Calorimetry

AbstractThe study involved laminated nylon and viscose nonwovens, both perforated and non-perforated, with a view to using them for packaging of powders in mineral warmers. The nonwovens were examined in terms of morphology as well as tensile strength in dry and wet states. Thermal properties were determined by differential scanning calorimetry. Dynamic mechanical analysis was carried out in a broad range of temperatures. Surface wettability and water vapor permeability were assessed. The findings were analyzed to determine the utility of the studied materials as mineral warmer packaging materials in cold work or living environments.

scholarly journals Development of seaweed-based bamboo microcrystalline cellulose films intended for sustainable food packaging applications

BioResources ◽  
2019 ◽  
Vol 14 (2) ◽  
pp. 3389-3410 ◽  
Author(s):  
D. Hermawan ◽  
Tze Kiat Lai ◽  
Shima Jafarzadeh ◽  
Deepu A. Gopakumar ◽  
Hasan M. ◽  
...  
Keyword(s):  
Microcrystalline Cellulose ◽  
Food Packaging ◽  
Water Solubility ◽  
Moisture Absorption ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Absorption Capacity ◽  
Vapor Permeability ◽  
Sustainable Food ◽  
Cellulose Films

Seaweed bio-composite films with different proportion of Lemang and Semantan bamboo microcrystalline cellulose (MCC) were fabricated via solvent casting. The seaweed/MCC composite films were flexible, transparent, and slightly yellow. The MCC particles further enhanced mechanical properties and opacity of films. The thermal stability of seaweed films was moderately improved upon addition of bamboo MCC particles. Bamboo MCC was found to be comparable to commercial MCC in reducing the water vapor permeability (WVP), water solubility (WS), and moisture absorption capacity (MSC) of seaweed films. The tensile strength (TS) of seaweed films was increased by 20 to 23% with addition of up to 5% MCC particles. In addition, bamboo MCC efficiently reduced the WVP of seaweed films comparable to commercial MCC particles. The WS of seaweed films was decreased by 10 to 19% with addition of 1% MCC particles loading. Lemang bamboo MCC (SB-MCC) was remarkably reduced the moisture absorption capacity (MAC) of films up to 25% with inclusion of only 1% MCC. Morphological analysis via Scanning Electron Microscopy (SEM) confirmed that there was homogeneous dispersion of MCC particles in the films. MCC particles improved the mechanical, thermal, and optical properties of seaweed films making them more suitable for food packaging applications.

scholarly journals Physical Properties of Banana Stem and Leaf Papers Laminated with Banana Film

2018 ◽  
Vol 16 (10) ◽  
pp. 753-763
Author(s):  
Natcharee JIRUKKAKUL
Keyword(s):  
Tensile Strength ◽  
Physical Properties ◽  
Raw Materials ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Packaging Materials ◽  
Environment Impact ◽  
Lamination Process ◽  
Banana Flour ◽  
Stems And Leaves

A sustainable development requires the use of bio-based packaging materials because of ready availability and limited environment impact. The porous structure and hydrophilic nature of cellulose in paper based materials needs to be combined or laminated with other materials to overcome these limitations. The fiber found in the banana stems and leaves, it is possible to use these raw materials in pulp processing and banana flour can be produced into an edible film. The aim of the study was to discover a suitable method (wet lamination or dry lamination) for producing paper (stems, leaves, or a 1:1 ratio of mixed stems and leaves) lamination with banana film and to study their physical properties for packaging application. Banana flour (4 %) solution was used as adhesive media between paper and film for wet lamination process where as the heating and compression were applied for dry lamination process. The results showed the efficiency of banana stems for paper production. However, there was an improvement in results when a 1:1 ratio of mixed stems and leaves was used due to an increase in tensile strength, elongation, and the L value.  There was no significance in the water vapor permeability in all treatments. All treatments of paper lamination expressed 6 - 13 % moisture content. The separation of film and paper layers occurred in dry lamination samples. The wet lamination of the leaf paper and mixed paper caused high tensile strength and elongation. Therefore, it could be used as an alternative and environmentally friendly method in the application of packaging materials.

scholarly journals Development of Antibacterial Biocomposites Based on Poly(lactic acid) with Spice Essential Oil (Pimpinella anisum) for Food Applications

Polymers ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3791
Author(s):  
Negin Noori ◽  
Ali Khanjari ◽  
Mohammadreza Rezaeigolestani ◽  
Ioannis K. Karabagias ◽  
Sahar Mokhtari
Keyword(s):  
Lactic Acid ◽  
Essential Oil ◽  
Food Packaging ◽  
Water Vapor Permeability ◽  
Principal Component ◽  
Poly Lactic Acid ◽  
Vapor Permeability ◽  
Dependent Manner ◽  
Concentration Dependent Manner ◽  
Active Food Packaging

Among the main biodegradable food packaging materials, poly-lactic acid (PLA) is a commercially successful polymer used notably in the food packaging industry. In this study, active PLA films containing different percentage of anise essential oil (AE) (0, 0.5, 1 and 1.5% v/v) were developed, and characterized by physical, mechanical and antibacterial analysis. Based on physical examinations, thermal stability of PLA/AE films was greater than the neat PLA film, and the minimum water vapor permeability (WVP) was recorded for PLA/0.5AE film (1.29 × 10 11 g/m s), while maximum WVP was observed for PLA/1.5AE (2.09 × 1011 g/m s). Moreover, the lightness and yellowness of the composites were decreased by the addition of AE. For the PLA composites with 1.5% AE, the tensile strength decreased by 35% and the elongation break increased by 28.09%, comparing to the pure PLA. According to the antibacterial analysis, the minimum inhibitory concentrations of PLA/AE film were 5 to 100 mg/mL and the active composite could create visible inhibition zones of 14.2 to 19.2 mm. Furthermore, the films containing AE inhibited L. monocytogenes and V. parahaemolyticus in a concentration-dependent manner. The confirmation of the success of the incorporation of EOs into the PLA films was further evaluated using principal component analysis, where positive results were obtained. In this context, our findings suggest the significant potency of AE to be used as an antibacterial agent in active food packaging.

Morphology of poly(3-hydroxybutyrate)–polyvinyl alcohol extrusion films

2015 ◽  
Vol 35 (8) ◽  
pp. 765-771 ◽  
Author(s):  
Anatoly A. Ol’khov ◽  
Alexey L. Iordanskii ◽  
Tamara P. Danko
Keyword(s):  
Water Vapor ◽  
Polyvinyl Alcohol ◽  
Relative Elongation ◽  
Composite Films ◽  
Tensile Modulus ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Extruded Films

Abstract The morphology of extruded films based on blends of polyvinyl alcohol (PVA) and poly(3-hydroxybutyrate) (PHB) was studied for various compositions. The methods of differential scanning calorimetry (DSC) and X-ray analysis were used. The phase-sensitive characteristics of the composite films, diffusion and water vapor permeability were also investigated. Processes of binding of water and swelling cause the first areas; processes of a relaxation and transition of structure of composites to an equilibrium condition, the second. In addition, the tensile modulus and relative elongation-at-break were measured. Changes in the glass transition temperature (Tg) of the blends and constant melting points of the components show their partial compatibility in intercrystalline regions. At a content of PHB in the composite films equal to 20–30% wt., the mechanical characteristics and water diffusion coefficients are dramatically changed. This fact, along with the analysis of the X-ray diffractograms, indicates a phase inversion in the above narrow concentration interval. The complex pattern of the kinetic curves of water vapor permeability is likely to be related to additional crystallization, which is induced in the composite films in the presence of water.

Sign in / Sign up

Export Citation Format

Share Document