Starch–PVA Nanocomposite Film Incorporated with Cellulose Nanocrystals and MMT: A Comparative Study

2016 ◽  
Vol 12 (1) ◽  
pp. 37-48 ◽  
Author(s):  
Nooshin Noshirvani ◽  
Babak Ghanbarzadeh ◽  
Hadi Fasihi ◽  
Hadi Almasi
Keyword(s):  
Thermal Properties ◽  
Food Packaging ◽  
Moisture Sorption ◽  
Water Vapor Permeability ◽  
Nanocrystalline Cellulose ◽  
Nanocomposite Films ◽  
Vapor Permeability ◽  
Mechanical And Thermal Properties ◽  
X Ray Diffraction ◽  
Scanning Calorimetry

Abstract The goal of this work was to compare the barrier, mechanical, and thermal properties of two types of starch–polyvinyl alcohol (PVA) nanocomposites. Sodium montmorillonite (MMT) and nanocrystalline cellulose were chosen as nanoreinforcements. X-ray diffraction (XRD) test showed well-distributed MMT in the starch–PVA matrix, possibly implying that the clay nanolayers formed an exfoliated structure. The moisture sorption, solubility and water vapor permeability (WVP) studies revealed that the addition of MMT and nanocrystalline cellulose reduced the moisture affinity of starch–PVA biocomposite. At the level of 7 % MMT, the nanocomposite films showed the highest ultimate tensile strength (UTS) (4.93 MPa) and the lowest strain to break (SB) (57.65 %). The differential scanning calorimetry (DSC) results showed an improvement in thermal properties for the starch–PVA–MMT nanocomposites, but not for the starch–PVA–NCC nanocomposites. Results of this study demonstrated that the use of MMT in the fabrication of starch–PVA nanocomposites is more favorable than that of nanocrystalline cellulose to produce a desirable biodegradable film for food packaging applications.

scholarly journals Development of PE/PCL Bilayer Films Modified with Casein and Aluminum Oxide

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3090
Author(s):  
Anita Ptiček Siročić ◽  
Ana Rešček ◽  
Zvonimir Katančić ◽  
Zlata Hrnjak-Murgić
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Water Vapor ◽  
Aluminum Oxide ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Mechanical And Thermal Properties ◽  
Oxide Compound ◽  
Bilayer Films ◽  
Oxide Particles

The studied samples were prepared from polyethylene (PE) polymer which was coated with modified polycaprolactone (PCL) film in order to obtain bilayer films. Thin PCL film was modified with casein/aluminum oxide compound to enhance vapor permeability as well as mechanical and thermal properties of PE/PCL films. Casein/aluminum oxide modifiers were used in order to achieve some functional properties of polymer film that can be used in various applications, e.g., reduction of water vapor permeability (WVTR) and good mechanical and thermal properties. Significant improvement was observed in mechanical properties, especially in tensile strength as well as in water vapor values. Samples prepared with aluminum oxide particles indicated significantly lower values up to 60%, and samples that were prepared with casein and 5% Al2O3 showed the lowest WVTR value.

scholarly journals Ionic Liquids as Delaminating Agents of Layered Double Hydroxide during In-Situ Synthesis of Poly (Butylene Adipate-co-Terephthalate) Nanocomposites

Nanomaterials ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 618 ◽  
Author(s):  
Hynek Beneš ◽  
Jana Kredatusová ◽  
Jakub Peter ◽  
Sébastien Livi ◽  
Sonia Bujok ◽  
...  
Keyword(s):  
Food Packaging ◽  
Water Vapor Permeability ◽  
Nanocomposite Films ◽  
Precipitation Method ◽  
Vapor Permeability ◽  
Inorganic Particles ◽  
In Situ Preparation ◽  
End Use ◽  
Co Precipitation

Currently, highly demanded biodegradable or bio-sourced plastics exhibit inherent drawbacks due to their limited processability and end-use properties (barrier, mechanical, etc.). To overcome all of these shortcomings, the incorporation of lamellar inorganic particles, such as layered double hydroxides (LDH) seems to be appropriate. However, LDH delamination and homogenous dispersion in a polymer matrix without use of harmful solvents, remains a challenging issue, which explains why LDH-based polymer nanocomposites have not been scaled-up yet. In this work, LDH with intercalated ionic liquid (IL) anions were synthesized by a direct co-precipitation method in the presence of phosphonium IL and subsequently used as functional nanofillers for in-situ preparation of poly (butylene adipate-co-terephthalate) (PBAT) nanocomposites. The intercalated IL-anions promoted LDH swelling in monomers and LDH delamination during the course of in-situ polycondensation, which led to the production of PBAT/LDH nanocomposites with intercalated and exfoliated morphology containing well-dispersed LDH nanoplatelets. The prepared nanocomposite films showed improved water vapor permeability and mechanical properties and slightly increased crystallization degree and therefore can be considered excellent candidates for food packaging applications.

Preparation and Characterization of Corn Starch-Nanodiamond Composite Films

2013 ◽  
Vol 469 ◽  
pp. 156-161 ◽  
Author(s):  
Hong Pan ◽  
Dan Xu ◽  
Qin Liu ◽  
Hui Qing Ren ◽  
Min Zhou
Keyword(s):  
Water Vapor ◽  
Food Packaging ◽  
Corn Starch ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Nanocomposite Films ◽  
Vapor Permeability ◽  
Ft Ir ◽  
Loading Amount ◽  
Physical Blending

Starch-based nanocomposite films were fabricated by the incorporation of different amounts of nanodiamond (ND) particles. These films were characterized by SEM, FT-IR, TGA, tensile testing and water vapor permeability measurement. It was observed that at low loadings, ND dispersed well in starch matrix. However, as the loading amount increased, aggregates as large as several micrometers appeared. The physical blending of ND with starch didnt change the thermal degradation mechanisms of starch films, only increased the char residues. As the ND loading increased, the tensile strength of composite films increased but the elongation at break decreased. However, the water vapor permeability increased as the loading of ND increased due to the increased microspores in films. With further modifications, ND may be considered as a novel of biocompatible nanofillers for reinforcement of biopolymers for food packaging applications.

scholarly journals Variasi Jarak Antar Layer Bentonit Pada Pembuatan Nanokomposit Pla-Bentonit Sebagai Kemasan Makanan

2020 ◽  
Vol 8 (1) ◽  
pp. 57-65
Author(s):  
Vita Wonoputri ◽  
Natasha Emanuella ◽  
Evelyn Angelica ◽  
Johnner Sitompul
Keyword(s):  
Food Packaging ◽  
Water Vapor Permeability ◽  
Xrd Analysis ◽  
Basal Spacing ◽  
Vapor Permeability ◽  
X Ray Diffraction ◽  
X Ray ◽  
The Matrix ◽  
Treatment Data ◽  
Octadecyl Amine

In this study, bentonite was used as a filler in the synthesis of polylactic acid (PLA) nanocomposite. The mechanical property of PLA-Bentonite nanocomposite was treated using two different surfactants, namely octadecyl amine (ODA) and trimethyl stearyl ammonium chloride (TSC) at two different concentration (20 mmol and 40 mmol). The treatments of ODA and TSC in the matrix with regards to the basal spacing of bentonite stacks  measured by X-Ray Diffraction (XRD) analysis. The results showed a significant increase in basal spacing was obtained when TSC 40 was applied for treatment. Data of Fourier Transform Infrared Spectroscopy (FTIR) suggested that this increase was caused by the incorporation of surfactant into the bentonite stacks. Most of the PLA-Bentonite nanocomposite can form intercalation structure, while a sample containing TSC 40 formed exfoliation structure. This exfoliation structure resulted in a film with the best tensile strength and water vapor permeability compared to the others. The film containing TSC 40 showed the lowest reduction in water activity, almost similar to the bread sample wrapped using conventional plastic. The bread wrapped with TSC 40 film was not grown by fungi as opposed to the conventional plastic, showing the potential of the nanocomposite film as food packaging.

scholarly journals Physical Properties of Composite Films from Tilapia Skin Collagen with Pachyrhizus Starch and Rambutan Peel Phenolics

Marine Drugs ◽  
2019 ◽  
Vol 17 (12) ◽  
pp. 662
Author(s):  
Yongliang Zhuang ◽  
Shiyan Ruan ◽  
Hanghang Yao ◽  
Yun Sun
Keyword(s):  
Tensile Strength ◽  
Physical Properties ◽  
Food Packaging ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Amorphous Structure ◽  
Vapor Permeability ◽  
Scanning Calorimetry ◽  
Active Food Packaging ◽  
Skin Collagen

Different composite films composed of tilapia skin collagen (TSC) with Pachyrhizus starch (PS) or rambutan peel phenolics (RPP) were prepared, and the physical properties of these films were determined. The effects of PS and RPP on TSC films were investigated, and our results indicated that PS and RPP could improve the physical properties of TSC films. Opacity and film thickness showed an enhanced trend with increasing PS and RPP contents in TSC films, whereas solubility in water, elongation-at-break (EAB), and water vapor permeability (WVP) showed declining trends. TSC film with 10% PS and 0.5% RPP had the highest tensile strength, and the tensile strength dropped drastically when the content of PS and RPP increased. The light transmittances of the films could decrease with the incorporation of PS and RPP. Differential scanning calorimetry (DSC) demonstrated that the addition of PS and RPP improved the thermal stability of TSC films. In addition, X-ray diffraction indicated that the crystallinity of the films decreased and the amorphous structure of the films tended to become more complex with the addition of PS and RPP. As shown by fourier transform infrared spectroscopy (FTIR) analysis, PS and RPP can strongly interact with TSC, resulting in a modification of its structure. Scanning electron microscope (SEM) analysis showed that there was a good compatibility between TSC, PS, and RPP. The results indicated that TSC film incorporated with 10% PS and 0.5% RPP was an effective method for improve the physical properties of the film. TSC–PS–RPP composite films can be used not only in biomedical applications, but also as active food packaging materials.

Effect of Surfactant on the Formation of Chitosan/ε-Polycaprolactone Blend Films for Food Packaging Applications

2021 ◽  
Author(s):  
Ana Catarina Damasceno Gomes ◽  
Karoline Ferreira Silva ◽  
Anderson Junior Freitas ◽  
Kelvi Wilson Evaristo Miranda ◽  
Taline Amorim Santos ◽  
...  
Keyword(s):  
Food Packaging ◽  
Water Vapor Permeability ◽  
Tween 80 ◽  
Continuous Phase ◽  
Vapor Permeability ◽  
Mechanical And Thermal Properties ◽  
Amino Groups ◽  
Multilayer Systems ◽  
Blend Films ◽  
High Interaction

Abstract The objective of this study was to develop and characterize chitosan-ε-polycaprolactone (CHI/PCL) polymer blends with Tween 80 as a compatibilizer for application in packaging. The blends were produced by casting, with up to 10% (w/w) PCL in the CHI matrix. These blends were characterized in terms of their microstructure, chemical interactions, mechanical and thermal properties, solubility and water vapor permeability (WVP). The micrographs showed microsphere-like structures from the PCL in the continuous phase of CHI. Fourier transform infrared spectroscopy (FTIR) indicated a high interaction between CHI amino groups and PCL carbonyls, resulting in blends with greater ductility than the pure CHI film, thus providing greater flexibility. In the crystallinity analyses, the presence of PCL favored an increase in crystalline regions, limiting the passage of light. Given the results, blends are an alternative for application in multilayer systems and can be considered for use as a biodegradable fraction in food packaging.

Effectiveness assessment of TiO2-Al2O3 nano-mixture as a filler material for improvement of packaging performance of PLA nanocomposite films

2020 ◽  
Vol 40 (10) ◽  
pp. 848-858
Author(s):  
Fatima Zohra Yakdoumi ◽  
Assia Siham Hadj-Hamou
Keyword(s):  
Polylactic Acid ◽  
Nanocomposite Film ◽  
Food Packaging ◽  
Antimicrobial Properties ◽  
Young Modulus ◽  
Nanocomposite Films ◽  
Vapor Permeability ◽  
Scanning Calorimetry ◽  
Melt Mixing ◽  
Vis Spectroscopy

AbstractThe main objective of this study was to assess the effectiveness of TiO2-Al2O3 nano-mixture used as filler in improving packaging films performance. Polylactic acid/titanium dioxide (PLA/TiO2), polylactic acid/alumina (PLA/Al2O3) and polylactic acid/TiO2-Al2O3 (PLA/TiO2-Al2O3) nanocomposite films were successfully prepared via melt mixing process and thoroughly characterized by FTIR spectroscopy, X-ray diffraction (XRD), UV–vis spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The properties such as heat resistant, barrier, mechanical and antimicrobial properties, required for food packaging have also been investigated. As compared to the neat PLA film, the developed PLA nanocomposites have displayed superior properties particularly the PLA/ TiO2-Al2O3 nanocomposite film. This resulted material has showed a 22 °C increase in its thermal stability versus 14 and 2 °C in the cases of PLA/TiO2 and PLA/Al2O3 respectively, and a 54% reduction of its water vapor permeability in comparison with 47% for PLA/TiO2 and 39% for PLA/Al2O3. In addition, the PLA/TiO2-Al2O3 had a significant enhancement of its mechanical properties. Its Young modulus increased by 102% unlike 23.60% for the PLA/TiO2 and 44.66% for the PLA/Al2O3. It was also noticed that this nanocomposite film demonstrated stronger antibacterial activity than the two others. The bacterial growth inhibition effect of TiO2-Al2O3 nano-mixture against Pseudomonas aeruginosa and Escherichia coli bacteria was more effective than that of its two constituents.

scholarly journals Enhancement of Mechanical and Barrier Property of Hemicellulose Film via Crosslinking with Sodium Trimetaphosphate

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 927
Author(s):  
Yuelong Zhao ◽  
Hui Sun ◽  
Biao Yang ◽  
Baomin Fan ◽  
Huijuan Zhang ◽  
...  
Keyword(s):  
Water Vapor ◽  
Food Packaging ◽  
Water Vapor Permeability ◽  
Preliminary Test ◽  
Esterification Reaction ◽  
Vapor Permeability ◽  
Mechanical And Thermal Properties ◽  
Water Vapor Barrier ◽  
Sodium Trimetaphosphate ◽  
Barrier Performance

Hemicellulose is a kind of biopolymer with abundant resources and excellent biodegradability. Owing to its large number of polar hydroxyls, hemicellulose has a good barrier performance to nonpolar oxygen, making this biopolymer promising as food packaging material. Hydrophilic hydroxyls also make the polymer prone to water absorption, resulting in less satisfied strength especially under humid conditions. Thus, preparation of hemicellulose film with enhanced oxygen and water vapor barrier ability, as well as mechanical strength is still sought after. Herein, sodium trimetaphosphate (STMP) was used as esterification agent to form a crosslinked structure with hemicellulose through esterification reaction to render improved barrier performance by reducing the distance between molecular chains. The thus modified hemicellulose film achieved an oxygen permeability and water vapor permeability of 3.72 cm3 × μm × m−2 × d-1 × kPa−1 and 2.85 × 10−10 × g × m−1 × s−1 × Pa−1, respectively, at the lowest esterification agent addition of 10%. The crosslinked structure also brought good mechanical and thermal properties, with the tensile strength reaching 30 MPa, which is 118% higher than that of the hemicellulose film. Preliminary test of its application in apple preservation showed that the barrier film obtained can effectively slow down the oxidation and dehydration of apples, showing the prospect of application in the field of food packaging.

scholarly journals Experimental Investigation of The Properties of Laminated Nonwovens Used for Packaging of Powders in Mineral Warmers

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
E. Irzmańska ◽  
M. Jurczyk-Kowalska ◽  
M. Bil ◽  
M. Płocińska
Keyword(s):  
Differential Scanning Calorimetry ◽  
Experimental Investigation ◽  
Tensile Strength ◽  
Thermal Properties ◽  
Cold Work ◽  
Water Vapor Permeability ◽  
Mechanical Analysis ◽  
Vapor Permeability ◽  
Packaging Materials ◽  
Scanning Calorimetry

AbstractThe study involved laminated nylon and viscose nonwovens, both perforated and non-perforated, with a view to using them for packaging of powders in mineral warmers. The nonwovens were examined in terms of morphology as well as tensile strength in dry and wet states. Thermal properties were determined by differential scanning calorimetry. Dynamic mechanical analysis was carried out in a broad range of temperatures. Surface wettability and water vapor permeability were assessed. The findings were analyzed to determine the utility of the studied materials as mineral warmer packaging materials in cold work or living environments.

Elucidating the Relationship Between Structure and Property of Waterborne Polyurethane-Cellulose Nanocrystals Nanocomposite Films

2020 ◽  
Vol 12 (8) ◽  
pp. 1213-1224
Author(s):  
Ya-Yu Li ◽  
Wei-Wen Jing ◽  
Jian-Hua Wang ◽  
Jun-Fang Li
Keyword(s):  
Water Vapor ◽  
Cellulose Nanocrystals ◽  
Food Packaging ◽  
Mechanical Performance ◽  
Water Vapor Permeability ◽  
Waterborne Polyurethane ◽  
Optical Transmittance ◽  
Nanocomposite Films ◽  
Vapor Permeability ◽  
Casting Technique

Cellulose nanocrystals (CNCs) are promising polymer reinforcements owning to their biocompatibility and high elastic modulus, low density, nano size, and inherent biocompatibility. The waterborne polyurethane-cellulose nanocrystals (WPU-CNCs) nanocomposite films were prepared using the conventional solvent casting technique over a whole composition. The mechanical performance, optical transmittance, amphiphilicity, water vapor permeability (WVP), and oxygen permeability (OP) of these WPU-CNCs films were evaluated. The incorporation of CNCs into WPU resulted in a significant enhancement of Young's modulus and tensile strength. The WVP of nanocomposite films had a lowest value at CNCs content of 50 wt.%. Upon the increase of CNCs content from 0 to 90 wt.%, the transmission path of oxygen molecular through the nanocomposite films became more tortuous, leading to drastic decrease in the OP. These WPU-CNCs nanocomposite films with high strength, optical transparency, water vapor and oxygen barrier properties have the potential applications in biomedical, furniture coating, and food packaging fields.

Sign in / Sign up

Export Citation Format

Share Document