scholarly journals Durable and High-efficiency Casein-derived Phosphorus-nitrogen-rich Flame Retardants for Cotton Fabrics

2021 ◽  
Author(s):  
Fang Xu ◽  
Guangxian Zhang ◽  
Peng Wang ◽  
Fangyin Dai
Keyword(s):  
Flame Retardant ◽  
Flame Retardants ◽  
High Efficiency ◽  
Oxygen Index ◽  
Skin Irritation ◽  
Cotton Fabrics ◽  
Reactive Groups ◽  
Index Value ◽  
Positive Effect ◽  
Limited Oxygen

Abstract A casein derivative (CADP) was synthesized using casein, which is bifunctional containing both –P=O(O-NH4+)2 reactive groups and -P(=O)-O-C- groups, and the durable flame-retardant cotton fabrics were successfully prepared by CADP. The –P=O(O-NH4+)2 reactive groups allowed CADP to be firmly grafted onto cellulose. The –P(=O)-O-C- groups made flame-retardant cotton fabrics more resistant to soaping and improved its durability. The modification by 40% CADP increased the limited oxygen index value (LOI) of cotton fabric from 17.4% to 41.6%, which maintained at 26.4% after 50 cycles of home machine washes. The results of TG, TG-FTIR and SEM indicated that CADP increased the condensed components and decreased the flammable gaseous compounds, resulting the positive effect on char formation of cellulose. The whiteness and tensile strength of cotton fabrics were retained well after modification, and the treated cotton fabrics didn’t have skin irritation.

Wool: Its Effect On Flame Retardant Properties of Blend Fabrics

1983 ◽  
Vol 1 (2) ◽  
pp. 145-154 ◽  
Author(s):  
John V. Beninate ◽  
Brenda J. Trask ◽  
Timothy A. Calamari ◽  
George L. Drake
Keyword(s):  
Thermal Degradation ◽  
Flame Retardant ◽  
Flame Retardants ◽  
Oxygen Index ◽  
Cotton Fabrics ◽  
Cotton Wool ◽  
Burning Rates ◽  
Low Levels ◽  
Flame Retardant Properties ◽  
Strength Retention

Durable phosphorus-based flame retardants were applied to twill fabrics con taining cotton and wool to study the effect of wool on the flame retardancy and physical properties of the blend fabrics. The presence of wool in untreated blend fabrics caused burning rates to decrease and oxygen index values to increase as wool content increased in the blends. These effects were also observed in cotton/ wool blends treated with low levels of the Thps-urea-TMM flame retardant, but were less pronounced in fabrics treated at high levels. Thermogravimetric analyses were conducted to study the thermal degradation of the treated and untreated fabrics. The presence of wool in treated blend fabrics did not sig nificantly change strength retention, area shrinkage and wrinkle recovery values in comparison to similarly treated 100% cotton fabrics.

Synthesis of a Flame Retardant for Epoxy Resins: Thermal Stability, Flame Retardancy, and Flame-Retardant Modes

2021 ◽  
Vol 36 (2) ◽  
pp. 172-184
Author(s):  
Y. Zhang ◽  
J. Liu ◽  
S. Li
Keyword(s):  
Infrared Spectroscopy ◽  
Thermogravimetric Analysis ◽  
Heat Release ◽  
Flame Retardant ◽  
Photoelectron Spectroscopy ◽  
Epoxy Resins ◽  
Oxygen Index ◽  
Limited Oxygen Index ◽  
Index Value ◽  
Limited Oxygen

Abstract A polyphosphonate (PDPA) flame retardant that contains phenyl phosphonic dichloride and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide groups, has been synthesized. The flame retardant was introduced into epoxy resins (EP) and cured by 4,4’-diamino diphenylmethane. The vertical burning, limited-oxygen index and cone calorimeter tests reveal that the PDPA can enhance the flame-retardant properties of the EP significantly. With only a 4 wt% PDPA loading, the EP composites achieved a limited-oxygen index value of 33.4% and a V-0 rating in the vertical burning test, and the peak heat release rate and total heat release were decreased by 40.9% and 24.6%, respectively. The thermal properties and gas pyrolysis products of the EP composites were evaluated by thermogravimetric analysis and thermogravimetric analysis-Fourier transform infrared spectroscopy, and the morphology and structure of residual char were characterized by scanning electron microscopy, Flourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. To explain the combined effects of the condensed and gas phases, modes of the flame-retardant action are proposed.

Preparation of microcellular poly(lactic acid) composites foams with improved flame retardancy

2016 ◽  
Vol 53 (1) ◽  
pp. 45-63 ◽  
Author(s):  
Kun Wang ◽  
Jingjing Wang ◽  
Dan Zhao ◽  
Wentao Zhai
Keyword(s):  
Lactic Acid ◽  
Flame Retardant ◽  
Oxygen Index ◽  
Poly Lactic Acid ◽  
Limited Oxygen Index ◽  
Cell Structures ◽  
Phosphorus Containing ◽  
Flame Retardant Properties ◽  
Index Value ◽  
Limited Oxygen

In this study, flame-retardant poly(lactic acid) foams with satisfactory cell structures were prepared by microcellular foaming technology using phosphorus-containing flame retardant and graphene as the charring agent. The introduction of 5–30 wt% flame retardant increased the limited oxygen index value of poly(lactic acid) from 19.0 to 26.5–37.8% and simultaneously increased the foam expansion of poly(lactic acid) foams from 4.4 to 5.8–17.5. In addition, all the prepared poly(lactic acid)/flame-retardant composites passed the UL-94 V-0 rating. The addition of 0.5 wt% graphene increased the limited oxygen index value of poly(lactic acid)/flame-retardant composite with flame-retardant content of 15 wt% from 27.9 to 29.2%, and more graphene additions improved the antidripping behavior of poly(lactic acid) composites. The possible mechanisms of the effects of the resultant cellular structure on the flame-retardant properties of poly(lactic acid) composites were also discussed.

Study on the Hydrophobic Modification of Ammonium Polyphosphate and its Application in Flame Retardant Polypropylene

2016 ◽  
Vol 852 ◽  
pp. 726-732
Author(s):  
Dong Bo Tian ◽  
Yong Jun He ◽  
Ting Ting Wang ◽  
Xiao Ning Gao ◽  
Qing Wang ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Flame Retardants ◽  
Oil And Gas ◽  
Oxygen Index ◽  
Silicone Oil ◽  
Ammonium Polyphosphate ◽  
Hydrophobic Modification ◽  
Hydrophobic Properties ◽  
Hydrophobic Silica ◽  
Limited Oxygen

In this paper, ammonium polyphosphate (APP) was modified by methyl hydrogen silicone oil and gas hydrophobic silica, hydrophobic ammonium polyphosphate (HAPP) was prepared. Then, HAPP was separately mixed with starch and melamine were introduced into polypropylene as flame retardants to prepare polypropylene (PP) retardant materials. The hydrophobic retention was of HAPP above 90%. According to the results from testing its wettability, its contact angle was 140.69°, which was increased by about 120°compared with APP, and this indicated the HAPP had better hydrophobic properties than that of the unmodified. And a comprehensive analysis is conducted on the scanning electron microscope (SEM) and infrared spectroscopy (FTIR).The results showed that the surface of APP is coated with methyl hydrogen silicone fluid and gas hydrophobic silica. The limited oxygen index (LOI) of the flame retardant PP material is measured by the oxygen index tester, and at a total flame retardant loading of 33wt%, the LOI value of PP retardant materials can achieve 29%, indicating that this flame retardant can better make the PP into the stable charred layer, and improve the performance of the flame retardant PP material greatly.

Microwave Assisted Preparation of Self-Extinguishing Cotton Fabrics by Small Molecules Containing Phosphorous and Nitrogen

2019 ◽  
Vol 6 (1) ◽  
pp. 3-12
Author(s):  
SeChin Chang ◽  
Brian Condon ◽  
Jade Smith
Keyword(s):  
Surface Modification ◽  
Small Molecules ◽  
Flame Retardant ◽  
Flame Retardants ◽  
Oxygen Index ◽  
Cotton Fabrics ◽  
Treatment Level ◽  
Limiting Oxygen Index ◽  
Microwave Assisted ◽  
Flammability Test

Background: New methods for preparing surface modification of flame retardant cotton fabrics were employed by applying a microwave-assisted technique with a minimum amount of co-solvent. Efforts at flame retardant cotton fabrics treated with economic and environmentally friendly flame retardant compounds based on the small molecules piperazine, PN and PNN, were done successfully. Methods and Results: The evidence of flame retardant chemical penetrations or surface modification of cotton fabrics was confirmed by Scanning Electron Microscope (SEM), and the treated cotton fabrics were evaluated by flammability tests, such as 45°angle (clothing textiles test) and limiting Oxygen Index (LOI). Thermogravimetric analysis of all treated cotton fabrics in a nitrogen atmosphere showed high thermal stability, as decomposition occurred between 276.9~291.2°C with 30.5~35.7% residue weight char yield at 600°C. Limiting Oxygen Index (LOI) and the 45° angle flammability test were used to determine the efficiency of the flame-retardant treatments on the fabrics. LOI values for control twill fabric showed ~18 vol% oxygen in nitrogen, whereas the highest treatment level had 32 vol%. High add-on treatments with flame retardants also readily passed the 45° angle flammability test. Conclusion: In the Microscale Combustion Calorimeter (MCC) tests, a decline in heat of combustion was shown through the smaller values acquired for THR, HRC and Tmax for all PN and PNN samples.

Novel High-Efficiency Casein-Based P–N-Containing Flame Retardants with Multiple Reactive Groups for Cotton Fabrics

2019 ◽  
Vol 7 (16) ◽  
pp. 13999-14008 ◽  
Author(s):  
Fang Xu ◽  
Ling Zhong ◽  
Cheng Zhang ◽  
Peng Wang ◽  
Fengxiu Zhang ◽  
...  
Keyword(s):  
Flame Retardants ◽  
High Efficiency ◽  
Cotton Fabrics ◽  
Reactive Groups

scholarly journals Effects of collagen fiber addition on the combustion and thermal stability of natural rubber

2020 ◽  
Vol 2 (1) ◽  
Author(s):  
Weixing Xu ◽  
Xintao Wu ◽  
Qilin Wen ◽  
Shuangyang Li ◽  
Yongjiao Song ◽  
...  
Keyword(s):  
Natural Rubber ◽  
Flame Retardant ◽  
Nitrogen Content ◽  
Flame Retardancy ◽  
Collagen Fiber ◽  
Oxygen Index ◽  
Air Pockets ◽  
Thermal Stability Of ◽  
Limited Oxygen ◽  
Properties Of Composites

Abstract Collagen fiber (CF) and silane coupling agent-modified collagen fiber (MCF) were used as flame retardant filler for natural rubber (NR) modification. The combustion phenomena and properties of composites blended with different dosages of CF or MCF were compared to elucidate the flame retardant mechanism of the composites. The flame retardancy of NR can be enhanced effectively by increasing nitrogen content (the nitrogen content of CF is about 18%), creating air pockets, and structuring the flame retardant network in the composites. MCF failed to structure a flame retardant network in the composite, indicating that its modification effects of MCF are weaker than those of CF. When CF dosage was 30 wt%, the composite can achieve the best flame retardancy, with limited oxygen index of 29.4% and without smoke and dripping during burning. This study demonstrated a new method for the flame retardant modification of NR. Graphical abstract

Development of thermally stable and hygienic colored cotton fabric made by treatment with natural coconut shell extract

2017 ◽  
Vol 48 (1) ◽  
pp. 87-118 ◽  
Author(s):  
MD Teli ◽  
Pintu Pandit
Keyword(s):  
Fourier Transform ◽  
Flame Retardant ◽  
Cotton Fabric ◽  
Oxygen Index ◽  
Fourier Transform Infrared ◽  
Cotton Fabrics ◽  
Energy Dispersive ◽  
Coconut Shell ◽  
Flame Resistance ◽  
Limiting Oxygen Index

As far as the value addition of textile is concerned, flame retardancy of textile materials is considered to be one of the most important properties in textile finishing by both industries as well as academic researchers. Flame-retardant property with thermal stability was imparted to cotton by using green coconut ( Cocos nucifera Linn) shell extract, a natural waste source of coconut. Coconut shell extract was analyzed by high-performance liquid chromatography, Fourier transform infrared spectroscopy, energy-dispersive spectrometry and its phytochemical analysis was also carried out. The coconut shell extract (acidic after extraction) was applied in three different pH (acidic, neutral, and alkaline) conditions to the cotton fabric. Flame-retardant properties of the untreated and the treated cotton fabrics were analyzed by limiting oxygen index and vertical flammability. The study showed that all the treated fabrics had good flame resistance property compared to that of the untreated fabric. The limiting oxygen index value was found to increase by 72.2% after application of the coconut shell extract from alkaline pH. Pyrolysis and char formation behavior of the concerned fabrics were studied using thermogravimetric analysis and differential scanning calorimetric analysis in a nitrogen atmosphere. The physicochemical composition of the untreated and coconut shell extract treated cotton fabrics were analyzed by attenuated total reflection–Fourier transform infrared, scanning electron microscope, and energy-dispersive X-ray spectroscopy. Also, treated cotton fabric showed natural brown color and antibacterial property against both Gram-positive and Gram-negative bacteria. The durability of the flame-retardant functionality to washing with soap solution has also been studied and reported in this paper.

scholarly journals FLAME RETARDANTS EFFECTS ON THE INITIAL GROWTH OF Schizolobium amazonicum HUBER EX DUCKE

2021 ◽  
Vol 45 ◽  
Author(s):  
Elen Silma Oliveira Cruz Ximenes ◽  
Andréa Carvalho da Silva ◽  
Adilson Pacheco de Souza ◽  
Josiane Fernandes Keffer ◽  
Alison Martins dos Anjos ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Leaf Area ◽  
Flame Retardants ◽  
Biomass Accumulation ◽  
Dry Mass ◽  
Initial Growth ◽  
Environmental Implications ◽  
Leaf Dry Mass ◽  
Height Increase ◽  
Positive Effect

ABSTRACT Flame retardants are efficient in fighting wildfire; however, their environmental implications, especially regarding the vegetation, need to be clarified. This work aimed at assessing the effects of flame retardant on the initial growth of Schizolobium amazonicum. Treatments consisted in applying different flame retardant concentrations via substrate and leaf: Phos-Chek WD-881® (0, 3.00, 6.00, 8.00 and 10.00 mL L-1), Hold Fire® (0, 7.00, 9.00, 12.00 and 15.00 mL L-1) and water-retaining polymer Nutrigel® used as alternative retardant (0, 0.25, 0.50, 0.75 and 1.00 g L-1). Growth analyses were carried out to assess the effects of these substances (10 repetitions per treatment). The aliquot of 10.00 mL L-1 of Phos-Chek WD881 applied on the leaves led to an increase of 70% in leaf area and 15% in seedling height. The same Phos-Chek concentration favored height increase (32%) and total dry mass accumulation (33%) throughout time. The concentration of 15 mL L-1 of Hold Fire® applied on leaves, compromised 45% the accumulation of dry biomass in the seedling. Initially, 1.00 g L-1 of Nutrigel® applied via substrate led to an increase of 70% in leaf area, 29% in plant height, and 89% in leaf dry mass. Therefore, Phos-Chek applied on leaves favored shoot growth in S. amazonicum. Hold Fire® applied on leaves impaired biomass accumulation in seedlings. Nutrigel® applied on substrate does not cause long-lasting damage to the initial growth of S. amazonicum. The aliquot of 0.50 g L-1 administered via polymer leave had positive effect on seedling shoot.

The Flammability of Polyacrylonitrile and Its Copolymers I. The Flammability Assessment Using Pressed Powdered Polymer Samples

1993 ◽  
Vol 11 (5) ◽  
pp. 442-456 ◽  
Author(s):  
Jun Zhang ◽  
Michael E. Hall ◽  
A. Richard Horrocks
Keyword(s):  
Flame Retardant ◽  
Flame Retardancy ◽  
Flame Retardants ◽  
Oxygen Index ◽  
Char Residue ◽  
Acrylic Polymer ◽  
Limiting Oxygen Index ◽  
Convenient Means ◽  
Burning Rates ◽  
Polymer Flammability

This paper is the first in a series of four which investigates the burning behaviour and the influence of flame retardant species on the flam mability of fibre-forming polymer and copolymers of acrylonitrile. A pressed powdered polymer sheet technique is described that enables a range of polymer compositions in the presence and absence of flame retardants to be assessed for limiting oxygen index, burning rate and char residue deter minations. The method offers a rapid, reproducible and convenient means of screening possible flame retardant systems, and LOI values compare favourably with those of films and fabrics comprising the same polymeric type. Burning rates, however, are sensitive to changes in physical sample character such as form (film vs. powder sheet) and density. Thus the technique forms an excellent basis for the generation of burning data which will enable comprehensive studies of acrylic polymer flammability and flame retardancy to be undertaken.

Sign in / Sign up

Export Citation Format

Share Document