scholarly journals Green Chemical Synthesis of N-Cholyl-L-Cysteine Encapsulated Gold Nanoclusters For Fluorometric Detection of Mercury Ions

2021 ◽  
Author(s):  
Kasthuri Jayapalan ◽  
Sivasamy Arumugam ◽  
Rajendiran Nagappan
Keyword(s):  
Uv Light ◽  
Stokes Shift ◽  
Gold Nanoclusters ◽  
Green Emission ◽  
Fluorescence Analysis ◽  
Cost Effective ◽  
Single Step ◽  
Fluorometric Detection ◽  
Transmission Electron ◽  
Green Chemical Synthesis

Abstract Here we report a simple, single-step, cost-effective, environmentally friendly, and biocompatible approach using sodium salt of N-cholyl-L-cysteine (NaCysC) capped gold nanoclusters (AuNCs) with green emission properties at above the CMC in aqueous medium under UV-light irradiation. The primary and secondary CMC of NaCysC was found to be 4.6 and 10.7 mM respectively using pyrene as fluorescent probe. The synthesized AuNCs exhibit strong emission maxima at 520 nm upon excitation of 375 nm with a large Stokes shift of 145 nm. The surface functionality and morphology of NCs are studied by Fourier transform infrared spectroscopy, dymanic light scattering studies and transmission electron microscopy. The formation of AuNCs was completed within 5 h and exhibit high stability for more than 6 months. The NaCysC templated AuNCs selectively quenches the Hg2+ ions with higher sensitivity in aqueous solution over the other metal ions. The fluorescence analysis of Hg2+ showed a wide linear range from 15 to 120 µM and a detection limit was found to be 15 nM.

Focused Ion Beam Analysis of Low-K Dielectrics

2000 ◽  
Author(s):  
H. J. Bender ◽  
R. A. Donaton
Keyword(s):  
Electron Microscope ◽  
Cross Section ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Single Step ◽  
Specimen Preparation ◽  
Transmission Electron ◽  
Beam Analysis ◽  
Low K ◽  
Scanning Electron

Abstract The characteristics of an organic low-k dielectric during investigation by focused ion beam (FIB) are discussed for the different FIB application modes: cross-section imaging, specimen preparation for transmission electron microscopy, and via milling for device modification. It is shown that the material is more stable under the ion beam than under the electron beam in the scanning electron microscope (SEM) or in the transmission electron microscope (TEM). The milling of the material by H2O vapor assistance is strongly enhanced. Also by applying XeF2 etching an enhanced milling rate can be obtained so that both the polymer layer and the intermediate oxides can be etched in a single step.

scholarly journals Development of Quantum Dot (QD) Based Color Converters for Multicolor Display

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1089
Author(s):  
Muhammad T. Sajjad ◽  
Ashu K. Bansal ◽  
Francesco Antolini ◽  
Eduard Preis ◽  
Lenuta Stroea ◽  
...  
Keyword(s):  
Polymer Matrix ◽  
Cost Effective ◽  
Final Size ◽  
Force Microscopy ◽  
Morphological Studies ◽  
Color Displays ◽  
Transmission Electron ◽  
Different Temperatures ◽  
Color Conversion ◽  
Temperature Time

Many displays involve the use of color conversion layers. QDs are attractive candidates as color converters because of their easy processability, tuneable optical properties, high photoluminescence quantum yield, and good stability. Here, we show that emissive QDs with narrow emission range can be made in-situ in a polymer matrix, with properties useful for color conversion. This was achieved by blending the blue-emitting pyridine based polymer with a cadmium selenide precursor and baking their films at different temperatures. To achieve efficient color conversion, blend ratio and baking temperature/time were varied. We found that thermal decomposition of the precursor leads to highly emissive QDs whose final size and emission can be controlled using baking temperature/time. The formation of the QDs inside the polymer matrix was confirmed through morphological studies using atomic force microscopy (AFM) and transmission electron microscopy (TEM). Hence, our approach provides a cost-effective route to making highly emissive color converters for multi-color displays.

scholarly journals Fabrication of a liquid cell for in situ transmission electron microscopy

Microscopy ◽  
2020 ◽  
Author(s):  
Xiaoguang Li ◽  
Kazutaka Mitsuishi ◽  
Masaki Takeguchi
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Cost Effective ◽  
Production Method ◽  
Microscopy Imaging ◽  
Transmission Electron ◽  
In Situ Electron Microscopy ◽  
Liquid Cell ◽  
Si Wafer

Abstract Liquid cell transmission electron microscopy (LCTEM) enables imaging of dynamic processes in liquid with high spatial and temporal resolution. The widely used liquid cell (LC) consists of two stacking microchips with a thin wet sample sandwiched between them. The vertically overlapped electron-transparent membrane windows on the microchips provide passage for the electron beam. However, microchips with imprecise dimensions usually cause poor alignment of the windows and difficulty in acquiring high-quality images. In this study, we developed a new and efficient microchip fabrication process for LCTEM with a large viewing area (180 µm × 40 µm) and evaluated the resultant LC. The new positioning reference marks on the surface of the Si wafer dramatically improve the precision of dicing the wafer, making it possible to accurately align the windows on two stacking microchips. The precise alignment led to a liquid thickness of 125.6 nm close to the edge of the viewing area. The performance of our LC was demonstrated by in situ transmission electron microscopy imaging of the dynamic motions of 2-nm Pt particles. This versatile and cost-effective microchip production method can be used to fabricate other types of microchips for in situ electron microscopy.

scholarly journals Study on Structure, Thermal Behavior, and Viscoelastic Properties of Nanodiamond-Reinforced Poly (vinyl alcohol) Nanocomposites

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1426
Author(s):  
Tomáš Remiš ◽  
Petr Bělský ◽  
Tomáš Kovářík ◽  
Jaroslav Kadlec ◽  
Mina Ghafouri Azar ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Analysis ◽  
Single Step ◽  
Poly Vinyl Alcohol ◽  
Scanning Calorimetry ◽  
X Ray Scattering ◽  
Transmission Electron ◽  
Primary Particles ◽  
Solution Casting Method ◽  
Average Size

In this work, advanced polymer nanocomposites comprising of polyvinyl alcohol (PVA) and nanodiamonds (NDs) were developed using a single-step solution-casting method. The properties of the prepared PVA/NDs nanocomposites were investigated using Raman spectroscopy, small- and wide-angle X-ray scattering (SAXS/WAXS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). It was revealed that the tensile strength improved dramatically with increasing ND content in the PVA matrix, suggesting a strong interaction between the NDs and the PVA. SEM, TEM, and SAXS showed that NDs were present in the form of agglomerates with an average size of ~60 nm with primary particles of diameter ~5 nm. These results showed that NDs could act as a good nanofiller for PVA in terms of improving its stability and mechanical properties.

scholarly journals Synthesis of Exosome-Based Fluorescent Gold Nanoclusters for Cellular Imaging Applications

2021 ◽  
Vol 22 (9) ◽  
pp. 4433
Author(s):  
Eun Sung Lee ◽  
Byung Seok Cha ◽  
Seokjoon Kim ◽  
Ki Soo Park
Keyword(s):  
Photoelectron Spectroscopy ◽  
Low Cost ◽  
Stokes Shift ◽  
Gold Nanoclusters ◽  
Human Colon ◽  
Cellular Imaging ◽  
Metal Nanoclusters ◽  
Human Colon Cancer ◽  
X Ray ◽  
High Concentrations

In recent years, fluorescent metal nanoclusters have been used to develop bioimaging and sensing technology. Notably, protein-templated fluorescent gold nanoclusters (AuNCs) are attracting interest due to their excellent fluorescence properties and biocompatibility. Herein, we used an exosome template to synthesize AuNCs in an eco-friendly manner that required neither harsh conditions nor toxic chemicals. Specifically, we used a neutral (pH 7) and alkaline (pH 11.5) pH to synthesize two different exosome-based AuNCs (exo-AuNCs) with independent blue and red emission. Using field-emission scanning electron microscopy, energy dispersive X-ray microanalysis, nanoparticle tracking analysis, and X-ray photoelectron spectroscopy, we demonstrated that AuNCs were successfully formed in the exosomes. Red-emitting exo-AuNCs were found to have a larger Stokes shift and a stronger fluorescence intensity than the blue-emitting exo-AuNCs. Both exo-AuNCs were compatible with MCF-7 (human breast cancer), HeLa (human cervical cancer), and HT29 (human colon cancer) cells, although blue-emitting exo-AuNCs were cytotoxic at high concentrations (≥5 mg/mL). Red-emitting exo-AuNCs successfully stained the nucleus and were compatible with membrane-staining dyes. This is the first study to use exosomes to synthesize fluorescent nanomaterials for cellular imaging applications. As exosomes are naturally produced via secretion from almost all types of cell, the proposed method could serve as a strategy for low-cost production of versatile nanomaterials.

scholarly journals 38 Using pooled data for single-step genomic prediction: Impact of within-pool variance and size

2020 ◽  
Vol 98 (Supplement_4) ◽  
pp. 9-9
Author(s):  
Johnna L Baller ◽  
Stephen D Kachman ◽  
Larry A Kuehn ◽  
Matthew L Spangler
Keyword(s):  
Phenotypic Variation ◽  
Equal Opportunity ◽  
Cost Effective ◽  
Single Step ◽  
Pool Size ◽  
Individual Data ◽  
Phenotypic Data ◽  
Breeding Values ◽  
Mean Values ◽  
Genetic Evaluations

Abstract Economically relevant traits (ERT) are routinely collected within commercial segments of the beef industry but are rarely included in genetic evaluations because of unknown pedigrees. Individual relationships could be resurrected with genomics, which would be costly; pooling DNA and phenotypic data provides a cost-effective solution. A simulated beef cattle population consisting of 15 generations was genotyped with approximately 50k markers (841 quantitative trait loci were located across the genome) and phenotyped for a moderately heritable trait. Individuals from generation 15 were included in pools (observed genotype and phenotype were mean values of a group). Estimated breeding values (EBV) were generated from a single-step GBLUP model. The effects of pooling strategy (random and minimizing or uniformly maximizing phenotypic variation), pool size (1, 2, 10, 20, 50, 100, or no data from generation 15), and generational gaps of genotyping on EBV accuracy (correlation of EBV with true breeding values) were quantified. Greatest EBV accuracies of sires and dams were observed when no gap between genotyped parents and pooled offspring occurred. The EBV accuracies resulting from pools were greater than no data from generation 15 regardless of sire or dam genotyping. Minimizing phenotypic variation increased EBV accuracy by 8% and 9% over random pooling and uniformly maximizing phenotypic variation, respectively. Pool size of 2 was the only scenario that did not significantly decrease EBV accuracy compared to individual data when pools were formed randomly or by uniformly maximizing phenotypic variation (P > 0.05). Pool sizes of 2, 10, 20, or 50 did not generally lead to EBV accuracies that were statistically different than individual data when pools were constructed to minimize phenotypic variation (P > 0.05). Pooled genotyping to garner commercial-level phenotypes for genetic evaluations seems plausible, although differences exist depending on pool size and pool formation strategy. The USDA is an equal opportunity employer.

Fabrication of Bifunctional SiO2/Europium-Polyoxometalates/Ag Particles and their Luminescence and Catalysis Properties

2013 ◽  
Vol 575-576 ◽  
pp. 216-224
Author(s):  
Jun Wang ◽  
Shao Hua Fan ◽  
Wei Qian Zhao ◽  
Wu Ke Li ◽  
Xue Lian Lu
Keyword(s):  
Main Product ◽  
Catalytic Properties ◽  
Uv Light ◽  
Luminescent Properties ◽  
Silica Spheres ◽  
Hybrid Particles ◽  
Red Emission ◽  
Transmission Electron ◽  
Ag Particles ◽  
Luminescent Spectra

In this paper, Stöber silica particles were decorated with polyethyleneimine and silver nanoparticles and Eu-polyoxometalates were grafted on the surface of polyethyleneimine/silica spheres. The hybrid SiO2/Eu-polyoxometalates/Ag particles were characterized by IR, UVvis, luminescent spectra, scanning electron microscopy, transmission electron microscope, and cyclic voltammetry (CV), respectively. The hybrid particles show the bright red emission under UV light which can be observed by naked eyes. The luminescent properties of particles have been investigated which show that Ag nanoparticles have an influences on the luminescence of europium ions. The electrochemical activities of SiO2/Eu-polyoxometalates/Ag particles have been demonstrated by CV measurement. The catalytic results indicate that the hybrid particles show the catalytic properties in the oxidation of styrene and benzaldehyde is the main product of the reaction.

Syntheses, crystal structures and photoluminescence properties of two rare-earth molybdates CsLn(MoO4)2 (Ln=Eu, Tb)

2018 ◽  
Vol 233 (2) ◽  
pp. 73-79 ◽  
Author(s):  
Dan Zhao ◽  
Fa-Xue Ma ◽  
Bao-Zhong Liu ◽  
Yun-Chang Fan ◽  
Xue-Feng Han ◽  
...  
Keyword(s):  
Rare Earth ◽  
Uv Light ◽  
Layer Structure ◽  
Green Emission ◽  
Salt Flux ◽  
Photoluminescence Properties ◽  
X Ray Diffraction ◽  
Orthorhombic Space Group ◽  
Light Excitation ◽  
Rare Earth Molybdates

AbstractSingle crystals of two cesium rare-earth molybdates CsLn(MoO4)2(Ln=Eu, Tb) have been prepared using the high temperature molten salt (flux) method. Single-crystal X-ray diffraction analyses reveal that they crystallize in the orthorhombic space groupPccm(No. 49) and features a 2D layer structure that is composed of [Ln(MoO4)2]∞and [Cs]∞layers. Under near-UV light excitation, emission spectrum of CsEu(MoO4)2consists of several sharp lines due to the characteristic electronic transitions of Eu3+ions, whereas CsTb(MoO4)2exhibits characteristic green emission of Tb3+ions.

A novel electrochemical comparative sensing interface of MgO nanoparticles synthesized by different methods

2017 ◽  
Vol 233 (3) ◽  
pp. 753-762 ◽  
Author(s):  
Utkarsh Jain ◽  
CS Pundir ◽  
Shaivya Gupta ◽  
Nidhi Chauhan
Keyword(s):  
Electrochemical Impedance ◽  
Chemical Reduction ◽  
Cost Effective ◽  
Green Technology ◽  
Mgo Nanoparticles ◽  
Transmission Electron ◽  
Impedance Spectroscopy Study ◽  
Vis Spectroscopy ◽  
Reduction Methods ◽  
Average Size

Recent advancements in nanotechnology, for the biosynthesis of metal nanoparticles through enormous techniques, showed multidimensional developments. One among many facets of nanotechnology is to procure and adopt new advancements for green technology over chemical reduction synthesis. This adaptation for acquiring green nanotechnology leads us to a new dimension of nanobiotechnology. In order to imply one such efforts, in this study the emphasis is being laid on the synthesis of MgO nanoparticles using green technology and eliminating chemical reduction methods. Different characterization techniques such as UV–Vis spectroscopy, transmission electron microscopy, and dynamic light scattering were used to carry out the experiments. The average size of MgO nanoparticles were obtained in the range of 85–95 nm, when synthesized by various sources. The extracts of plants were capable of producing MgO nanoparticles efficiently and exhibited good results during cyclic voltammetry and electrochemical impedance spectroscopy study. The electrode modified with MgO nanoparticles (plant extract) showed good stability (90 days) and high conductivity. This study reports cost-effective and environment-friendly method for synthesis of MgO nanoparticles using plant extracts. The process is rapid, simple, and convenient and can be used as an alternative to chemical method.

scholarly journals Multifunctional Ionogels Incorporated with Lanthanide (Eu3+, Tb3+) Complexes Covalently Modified Multi-Walled Carbon Nanotubes

Polymers ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 1099 ◽  
Author(s):  
Qiuping Li
Keyword(s):  
Carbon Nanotubes ◽  
Ionic Liquids ◽  
Uv Light ◽  
Green Emission ◽  
Sem Images ◽  
Hybrid Gels ◽  
Multi Walled Carbon Nanotubes ◽  
Electric Materials ◽  
Walled Carbon Nanotubes ◽  
Functionalized Mwcnts

Ionogels refer to an emerging composite material made from the confinement of ionic liquids within some specific cross-linked network matrices. They have potential applications in areas such as electrochemical and optical-electric materials. Incorporation of lanthanide (Eu3+, Tb3+) complexes covalently functionalized multi-walled carbon nanotubes (MWCNTs) in ionogels provide new ideas to design and synthesize novel luminescent hybrid materials that have excellent characteristics of luminescence and ionic conductivity. Here, the multifunctional ionogels were synthesized by confining an ionic liquid and the rare earth functionalized MWCNTs in the cross-linked polymethyl methacrylate (PMMA) networks, resulting in a novel optical/electric multifunctional hybrid material. The SEM images and digital photographs suggest that the lanthanide functionalized MWCNTs are evenly dispersed in the hybrid matrices, thus leading to a certain transparency bulky gel. The resulting ionogels exhibit certain viscosity and flexibility, and display an intense red/green emission under UV-light irradiation. The intrinsic conductibility of the embedded ionic liquids and carbon nanotubes in conjunction with the outstanding photoluminescent properties of lanthanide complexes makes the soft hybrid gels a material with great potential and valuable application in the field of optical-electric materials.

Sign in / Sign up

Export Citation Format

Share Document