scholarly journals Management of Relay-cropped Strawberry and Eggplant to Maximize Yield and Economic Return

HortScience ◽  
2020 ◽  
Vol 55 (7) ◽  
pp. 1083-1089 ◽  
Author(s):  
Ravneet K. Sandhu ◽  
Nathan S. Boyd ◽  
Shaun Sharpe ◽  
Zhengfei Guan ◽  
Qi Qiu ◽  
...  
Keyword(s):  
Economic Loss ◽  
Planting Date ◽  
Production Costs ◽  
Planting Dates ◽  
Economic Return ◽  
Budget Analysis ◽  
Sole Crop ◽  
Unique Approach ◽  
Relay Cropping ◽  
Termination Date

Strawberry growers face rising production costs combined with competition from foreign imports. Relay cropping vegetables with strawberries is a unique approach that can diversify income and reduce the risk associated with strawberry production. Planting vegetable transplants on the same bed before strawberry crop termination enables continued berry harvesting while the new vegetable transplants become established. Relay cropping techniques of strawberry with eggplants were evaluated during the 2016–17 and 2017–18 seasons in Balm, FL. The strawberry crop was planted in September, and eggplant was transplanted into the beds either as a sole crop or with strawberry plants. Two experiments were conducted to optimize the planting date of strawberries and the termination date of strawberries. The objective of the research was to examine the competitive relationship between strawberry and eggplant crops and to define the optimal planting date for the eggplant and termination date of strawberries to minimize the competitive interaction and maximize the yield of both crops. Strawberry yields were unaffected (P = 0.938) by relay cropping or by the planting date of the eggplant. Eggplants grown without strawberries had 27% to 32% higher yields (P = 0.004) compared with relay-cropped eggplants, and eggplant yield decreased with later planting dates (P < 0.001). A partial budget analysis showed that transplant dates of 4 and 18 Jan. for eggplants with strawberries resulted in increased profits of $7320 and $3461 per ha, respectively, over the baseline treatment of strawberries alone, but later planting dates resulted in an overall economic loss ($7800–$16,000/ha). Strawberry termination dates did not affect eggplant yields. In conclusion, relay cropping eggplants with strawberries resulted in no effect on strawberry yields, reduced eggplant yields, but increased overall profits when eggplant were transplanted in early to mid-January. Relay cropping of strawberries with eggplants in early February to early March is less profitable than a monocrop of strawberries.

Farmer-led Innovations in Rice Farming System in the Flood-prone Ecosystem of Bangladesh

2010 ◽  
pp. 6-13 ◽  
Author(s):  
M Shahe Alam ◽  
MM Husain ◽  
MZ Abedin
Keyword(s):  
Household Income ◽  
Farming System ◽  
Rice Production ◽  
Production Costs ◽  
Gross Margin ◽  
Farm Productivity ◽  
Farm Production ◽  
Budget Analysis ◽  
Relay Cropping ◽  
Sequential Cropping

Farmers in the flood-prone areas of Faridpur district have innovated rice-based farming technologies to improve their farm production and household income. One of such innovations is relay cropping of modern variety (MV) rice with jute. In order to investigate the detail socioeconomic issues of this farmer-led innovation, a survey-based study was undertaken during 2003. The analysis revealed that, following Jute + rice relay cropping method, farmers could enrich their farm productivity and household income. Farmers’ innovation involves lesser production costs compared to the conventional method and obtained much higher gross margin. Moreover, the new method proved to be advantageous in several ways: (i) the innovation involves about 6% less labour in MV Aman cultivation; (ii) under this technology, MV Aman rice can escape water stress in October, i.e. needs no supplemental irrigation; (iii) farmers have the scope of bearing almost 20% less input cost; and (iv) farmers can avoid the botheration of Aman seed bed preparation. Partial budget analysis further showed that, farmers could receive higher profit of Tk.4021/ha through MV rice production as relay cropping with Jute compared to that of rice production as sequential cropping.

Effect of planting date and density on calendula and peppermint herbs

2014 ◽  
Vol 1 (1) ◽  
pp. 25-29
Author(s):  
Rahim Mohammadian ◽  
Behnam Tahmasebpour ◽  
Peyvand Samimifar
Keyword(s):  
Mutual Effect ◽  
Dry Weight ◽  
Planting Date ◽  
Mass Reduction ◽  
Flower Number ◽  
Planting Dates ◽  
Randomized Design ◽  
Significant Difference ◽  
Completely Randomized Design ◽  
Total Maximum

A factorial experiment was conducted with a completely randomized design to evaluate the effects of planting date and density on calendula herbs and peppermint. It had 3 replicates and was done in Khosroshahr research farm, Tabriz in 2006. Under studied factors were: 3 planting dates (10 May, 25 May and 10 June) in 4 densities (25, 35, 45, 55) of the plant in square meters. The results of variance a nalysis showed that there was 1% probability significant difference between the effects of planting date and bush density on the leave number, bush height and the bush dry weight. But the mutual effect of the plant date in mentioned traits density was insignificant. Regarding the traits mean comparison, the total maximum dry weight was about the 55 bush density in mm. Also, the bush high density in mm causes the bush growth and its mass reduction. When there is the density grain, the flower number will increase due to bush grain in surface unit. Overall, we can conclude that 10 June planting and 45 bush density in mm is the most suitable items and results in favored production with high essence for these crops.

Nitrogen Demand of Cut Chrysanthemums in Relation to Shoot Height and Planting Date

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 523c-523
Author(s):  
Siegfried Zerche
Keyword(s):  
Dry Matter ◽  
Plant Density ◽  
Plant Biomass ◽  
N Uptake ◽  
Planting Date ◽  
Dry Matter Accumulation ◽  
Planting Dates ◽  
Shoot Height ◽  
Climate Conditions ◽  
Growing Period

Refined nutrient delivery systems are important for environmentally friendly production of cut flowers in both soil and hydroponic culture. They have to be closely orientated at the actual nutrient demand. To solve current problems, express analysis and nutrient uptake models have been developed in horticulture. However, the necessity of relatively laborious analysis or estimation of model input parameters have prevented their commercial use up to now. For this reason, we studied relationships between easily determinable parameters of plant biomass structure as shoot height, plant density and dry matter production as well as amount of nitrogen removal of hydroponically grown year-round cut chrysanthemums. In four experiments (planting dates 5.11.91; 25.3.92; 4.1.93; 1.7.93) with cultivar `Puma white' and a fixed plant density of 64 m2, shoots were harvested every 14 days from planting until flowering, with dry matter, internal N concentration and shoot height being measured. For each planting date, N uptake (y) was closely (r2 = 0.94; 0.93; 0.84; 0.93, respectively) related to shoot height (x) at the time of cutting and could be characterized by the equation y = a * × b. In the soilless cultivation system, dry matter concentrations of N remained constant over the whole growing period, indicating non-limiting nitrogen supply. In agreement with constant internal N concentrations, N uptake was linearly related (r2 = 0.94 to 0.99) to dry matter accumulation. It is concluded that shoot height is a useful parameter to include in a simple model of N uptake. However, in consideration of fluctuating greenhouse climate conditions needs more sophisticated approaches including processes such as water uptake and photosynthetically active radiation.

scholarly journals Impact of Row Spacing and Planting Date on the Canopy Environment, Abundance of Lesser Cornstalk Borer and Other Arthropods, and Incidence of Aflatoxigenic Fungi in Peanuts

1997 ◽  
Vol 24 (1) ◽  
pp. 52-59
Author(s):  
S. D. Stewart ◽  
K. L. Boweri ◽  
T. P. Mack ◽  
J. H. Edwards
Keyword(s):  
Climatic Conditions ◽  
Planting Date ◽  
Row Spacing ◽  
Planting Dates ◽  
Canopy Development ◽  
Late Planting ◽  
Elasmopalpus Lignosellus ◽  
Soil Temperatures ◽  
Lepidoptera Pyralidae ◽  
Wide Row Spacing

Abstract Three row spacings and two planting dates for peanuts, Arachis hypogaea L., were examined in 1993 and 1994 to determine the influence of the canopy environment on lesser cornstalk borer, Elasmopalpus lignosellus (Zeller) (Lepidoptera: Pyralidae), other arthropods, and alflatoxigenic fungi. Climatically, 1993 and 1994 were disparate years. Decreasing row spacing increased relative leaf area and light interception by the canopy but, compared to difference between planting dates or years, had a relatively small impact on soil temperatures and relative humidity within the canopy. Late planting produced smaller plants, retarded canopy development, and reduced yield in both years, but especially in 1993 when it was hot and dry. The wide row spacing did not yield as well as twin and normal row spacings in either year. Lesser cornstalk borer damage and aflatoxin concentration were higher in the late planting than in the early planting of 1993, but were unaffected by row spacing. Fewer predatory arthropods were caught as row spacing decreased in both beat and pitfall samples, but planting date had variable effects. Prevailing climatic conditions and planting date appeared to be more important in influencing the canopy environment and pest densities than was row spacing.

Response of two sunflower hybrids to planting dates and densities

2003 ◽  
Vol 51 (1) ◽  
pp. 25-35 ◽  
Author(s):  
A. Y. Allam ◽  
G. R. El-Nagar ◽  
A. H. Galal
Keyword(s):  
Seed Yield ◽  
Significant Influence ◽  
Plant Density ◽  
Growth Traits ◽  
Sowing Date ◽  
Planting Date ◽  
Oil Yield ◽  
Planting Density ◽  
Planting Dates ◽  
Head Diameter

This investigation was carried out at the Experimental Farm of Assiut University during the summers of 2000 and 2001 to study the responses of two sunflower hybrids (Vidoc and Euroflora) to planting dates (May 1st, June 1st and July 1st) and planting densities (55,533, 83,300 and 166,600 plants/ha). The results indicated that the two varieties differed highly significantly in all studied traits except oil yield/ha. The highest seed yield (3.64 t/ha) was obtained with the variety Vidoc. In addition, the results revealed that the planting date exerted a highly significant influence on all vegetative growth traits along with yield and its components. Increasing plant density increased the seed and oil yield/ha. By contrast, the stem diameter, head diameter, 100-seed weight and seed yield/plant decreased with increasing plant density. The interaction between varieties and plant density had a highly significant effect on head diameter. The greatest head diameter (20.06 cm) was recorded for the variety Vidoc planted at lower density. Concerning the interaction between planting density and planting date, the highest seed yield (4.47 t/ha) was obtained from dense plants at the early sowing date, and the highest oil % (45.32) at the late planting date and the lowest plant density. The second order interaction exerted a highly significant influence on stem and head diameter in addition to seed yield/plant, where the highest value (78.13 g/plant) was obtained with the variety Vidoc planted on May 1st at the lowest plant density.

Potassium Phosphite Mixed with Other Fungicides Reduces Yield Loss to Downy Mildew on Collard

2010 ◽  
Vol 11 (1) ◽  
pp. 10
Author(s):  
Anthony P. Keinath
Keyword(s):  
Downy Mildew ◽  
Yield Loss ◽  
Control Strategies ◽  
Southeastern United States ◽  
Production Costs ◽  
Water Control ◽  
Economic Return ◽  
Potassium Phosphite ◽  
Full Rate ◽  
Reduced Rate

Downy mildew of collard occurs frequently in the southeastern United States, and fungicides have become an essential part of economical control strategies for the disease. Fungicides were evaluated in 2007 and 2008 either alone or combined with a reduced rate (2 pt/acre) of potassium phosphite. Two formulations of potassium phosphite also were tested alone at the full rate (4 pt/acre). Presidio, Presidio plus Pro-Phyt (2007) or K-Phite (2008), K-Phite, Amistar plus ProPhyt, and Aliette reduced downy mildew severity at the final rating and also reduced AUDPC over the two years. Presidio plus potassium phosphite and Amistar plus ProPhyt increased the weight of healthy leaves and stems over the water control and also increased economic return calculated after fungicide and other production costs were subtracted from the crop value. The yields with Ranman, Sonata, and Presidio applied in combination with potassium phosphite were 16% greater than with the fungicides applied alone. Potassium phosphite may be useful in a tank-mix with other fungicides applied to collard to prevent yield loss to downy mildew. Accepted for publication 7 July 2010. Published 23 August 2010.

Tillage and Planting Date Effects on Weed Dormancy, Emergence, and Early Growth in Organic Corn

Weed Science ◽  
2015 ◽  
Vol 63 (2) ◽  
pp. 477-490 ◽  
Author(s):  
John R. Teasdale ◽  
Steven B. Mirsky
Keyword(s):  
Cover Crop ◽  
Dominant Species ◽  
Management Practices ◽  
Crop Management ◽  
Planting Date ◽  
Hairy Vetch ◽  
Planting Dates ◽  
Weed Biomass ◽  
Giant Foxtail ◽  
Smooth Pigweed

Insufficient weed control is a major constraint to adoption of reduced-tillage practices for organic grain production. Tillage, cover crop management, and crop planting date are factors that influence emergence periodicity and growth potential of important weed species in these systems. We assessed two hairy vetch cover crop management practices, disk-kill and roll-kill, across a range of corn planting dates from early May to late June in three experiments in Beltsville, MD. Patterns of seed dormancy, emergence, and early weed growth were determined for overseeded populations of common ragweed, giant foxtail, and smooth pigweed, three important species in the Mid-Atlantic states that represent early to late emergence. Common ragweed emergence was lowest and dormancy was highest of the three species across all planting dates. Giant foxtail emergence was higher than the other species in roll-killed hairy vetch and included a significant number of seeds that germinated before rolling operations in late June. Smooth pigweed had the highest emergence and lowest dormancy in disk-killed hairy vetch in June. Individual giant foxtail plant weight was higher in roll-killed than disk-killed hairy vetch in 2 of 3 yr, whereas that of smooth pigweed plants was higher in disk-killed than roll-killed vetch in 2 of 3 yr. Giant foxtail was the dominant species in roll-killed hairy vetch (averaged 79% of total weed biomass at corn silking), probably because of early germination and establishment before rolling operations. Smooth pigweed was the dominant species in disk-killed hairy vetch at June planting dates (averaged 77% of total weed biomass), probably because of high growth rates under warm conditions in tilled soil. This research demonstrated that cover crop management practices and the timing of planting operations can shift the dominant species of weed communities in organic farming systems and must be considered in long-term weed management planning.

scholarly journals Effect of planting dates on the yield of broccoli genotypes

2015 ◽  
Vol 40 (3) ◽  
pp. 465-478
Author(s):  
MA Hafiz ◽  
A Biswas ◽  
M Zakaria ◽  
J Hassan ◽  
NA Ivy
Keyword(s):  
Plant Height ◽  
Total Yield ◽  
Planting Date ◽  
Flower Head ◽  
Planting Dates ◽  
Head Diameter ◽  
Head Weight ◽  
Average Plant ◽  
Early Flower ◽  
Average Plant Height

This experiment was conducted during September, 2011 to March, 2012 in the experimental field of Department of Horticulture, Bangabandhu Sheikh Mujibur Rahman Agricultural University (BSMRAU), Gazipur to find out the effect of planting date on the yield of broccoli genotypes. There were five genotypes viz. Early green, Forest green, Green calabrese, Premium crop and Green king and four planting dates viz. 2 October, 27 October, 21 November and 16 December. The treatment effects were statistically analyzed and found significant in most of the characters studied. Genotype Green calabrese was the highest in average plant height (53.70 cm). Green king produced the maximum spread diameter (69.23 cm), stem diameter (30.35 mm) and early initiation of floral head. Genotype Early green performed the best regarding head weight (343.87 g), yield per plant (477.4 g) and yield (19.10 t/ha). Broccoli planted on 21 November initiated early flower head, maximum head diameter (16.99 cm), head weight (314.49 g), yield per plant (453.64 g) and total yield (18.15 t/ha). The genotype Early green planted on 21 November showed the best performance in yield per plant (580.17 g) and yield hectare (23.21 t/ha).Bangladesh J. Agril. Res. 40(3): 465-478, September 2015

scholarly journals Dry matter yield of forage corn in the late milk stage of development depending on the planting dates in the steppe zone of the Crimea

2020 ◽  
Author(s):  
A.V. Cherkashyna ◽  
◽  
E.F. Sotchenko ◽  
Keyword(s):  
Dry Matter ◽  
Maximum Yield ◽  
Steppe Zone ◽  
Planting Date ◽  
Severe Drought ◽  
Dry Matter Yield ◽  
Planting Dates ◽  
Stage Of Development ◽  
Moisture Availability ◽  
Sowing Dates

Dry matter yield is an objective indicator of assessing the productivity of corn hybrids grown for silage and green fodder. The aim of the work was to identify optimal planting dates to obtain maximum yield of dry matter at the late milk stage of development for hybrids of corn depending on groups of maturity under rain-fed conditions of the Crimean steppe zone. The sowing dates of the field experiment were on April 5th, 15th, and 25th. We studied hybrids of corn of different groups of maturity. Soil – chernozems southern low-humus. Meteorological conditions in 2016 were characterized by increased moisture availability (Selyaninov Hydrothermal Coefficient (HTC) 1.46). In 2017, severe drought was noted (HTC 0.34). Moisture availability was insufficient in 2018 and 2019 (HTC 0.79 and 0.78, respectively). In 2016-2019, the best planting date for hybrid ‘Nur’ was April 15th; the dry matter yield in the late milk stage was 6.69 t/ha. For the medium- early hybrid ‘Mashuk 220 MV’, the best sowing dates were April 15th and 25th; dry matter yield was 5.95 and 5.78 t/ha, respectively. Hybrid ‘Mashuk 355 MV’ demonstrated higher dry matter yield on April 5th and 15th (7.12 and 6.99 t/ha). However, the planting date of April 25th led to significant yield decreased (to 6.1 t/ha).

Planting Date Affects Survival and Height Growth of Hybrid Poplar

1986 ◽  
Vol 62 (3) ◽  
pp. 164-169 ◽  
Author(s):  
Edward A. Hansen
Keyword(s):  
Hybrid Poplar ◽  
Late Summer ◽  
Growing Season ◽  
Climatic Conditions ◽  
Planting Date ◽  
Planting Dates ◽  
Soil Frost ◽  
Growing Seasons ◽  
Poplar Cuttings ◽  
Energy Plantations

In this study I investigated the effects of planting date for soaked versus unsoaked cuttings of two hybrid poplar clones under irrigated versus unirrigated and weedy versus weed-free conditions. Cuttings were planted each year for 4 years. Survival at the end of the first growing season was generally greater than 90% for all planting dates. At the end of the second growing season survival for trees planted before July 16 was again generally more than 90%. However, cuttings planted from July 30 through August 27 showed a major decline in survival and survival of fall planted cuttings ranged from 6 to 90%. Mortality of late summer- or fall-planted cuttings occurred prior to the beginning of the second growing season and was attributed to frost heaving. The tallest trees were not those planted at the earliest possible dates (April in Rhinelander). Instead, the tallest trees at the end of the first and second growing seasons were those planted in early- and mid-May. This optimum planting period was the same regardless of clone, soaking, irrigation, or weed treatment. Actual optimum planting date would change with location and local climatic conditions. Some climatic indices may prove more universal in predicting when to plant. Although tentative, it appears that for best growth, unrooted hybrid poplar cuttings should be planted in soil warmer than 10 °C. Trees do not grow as well if planted immediately after soil frost leaves the ground. Key words: Energy plantations, plantation establishment, woody biomass, intensive culture, Populus.

Sign in / Sign up

Export Citation Format

Share Document