scholarly journals Glauconitic siltstone as a multi-nutrient fertilizer for Urochloa brizantha cv. Marandú

2019 ◽  
pp. 1280-1287
Author(s):  
Isabel Cristina Acciardi Violatti ◽  
Camila de Andrade Carvalho Gualberto ◽  
Luiz Henrique Silveira ◽  
Gustavo Alves Santos ◽  
Bárbara Campos Ferreira ◽  
...  
Keyword(s):  
Production Systems ◽  
Low Cost ◽  
Nutrient Release ◽  
Tropical Soils ◽  
Manganese Sulfate ◽  
Forage Plants ◽  
Randomized Design ◽  
Efficient Alternative ◽  
Urochloa Brizantha

Potassium (K) is one of the most absorbed nutrients by forage plants and it is found at low levels in tropical soils, requiring large amounts of fertilizers. The use of glauconitic siltstone as multi-nutrient fertilizers is an economic alternative to improve pasture-based production systems due to their low-cost production and long-term nutrient release. This study evaluated the effect of the glauconitic siltstone (GS) powder on three successive crops of Urochloa brizantha cv. Marandú (Syn. Brachiaria brizantha). Two experiments were carried out under greenhouse conditions, one using a Typic Dystrustox and the other a Typic Quartzipsamment. Both experiments were arranged in a completely randomized design with one factor, i.e., five glauconitic siltstone doses (0, 5, 20, 40, and 80 mg dm-3 of K2O) and four replications. In addition, three additional treatments were used, as potassium chloride, wollastonite and manganese sulfate at doses of 80 mg dm-3 of K2O, 270 mg dm-3 of silicon (Si) and 2 mg dm-3 of manganese (Mn), respectively. The sources were incubated for 60 days on the two soil types and, after the incubation period, Urochloa brizantha plants were grown. Three consecutive cuts were performed at 68, 104 and 168 days after sowing. The application of the GS in tropical soils promoted increases in plant dry matter, as well as K, Si and Mn levels in soil samples and accumulated in plants. In general, greater effects were obtained following the application of GS after consecutive cropping cycles due to its long-term release. Results described in this study provide an important understanding of the use of glauconitic siltstone as multi-nutrient fertilizers in tropical soils, being an efficient alternative to improve soil fertility and increase tropical pasture productivity.

scholarly journals Intensive Production and Management of Marandu Palisadegrass (Urochloa brizantha ‘Marandu’) Accelerates Leaf Turnover but Does Not Change Herbage Mass

Agronomy ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1846
Author(s):  
Fernando Ongaratto ◽  
Marcia Helena Machado da Rocha Fernandes ◽  
Erick Escobar Dallantonia ◽  
Lais de Oliveira Lima ◽  
Guilherme Alves do Val ◽  
...  
Keyword(s):  
Production Systems ◽  
Accumulation Rate ◽  
Canopy Structure ◽  
Leaf Lifespan ◽  
Randomized Design ◽  
Leaf Turnover ◽  
Dead Material ◽  
Urochloa Brizantha ◽  
Leaf Appearance ◽  
Stocking Rates

Pasture intensification through higher stocking rates, nitrogen fertilization and intensified grazing management in beef cattle production optimizes pasture use by increasing the forage harvested. We aimed to assess its effects on the morphogenesis and canopy structure of Urochloa brizantha ‘Marandu’ (marandu palisadegrass) pastures. The treatments consisted of marandu palisadegrass pastures managed under continuous stocking and a canopy height of 25 cm, with different levels of intensification: extensive, semi-intensive, and intensive systems N-fertilized with 0 kg, 75 kg, and 150 kg N ha−1 year−1, respectively, as ammonium nitrate (32% of N), with four replicates (paddocks) in a completely randomized design. Phyllochron (9.8 days) and leaf lifespan (34.7 days) were shorter in intensified pastures, whereas herbage mass was similar among treatments. Extensive pastures had a higher proportion of senescent material; thus, more intensive systems showed higher proportions of leaves and stems, although the leaves-to-stem ratio remained similar across production systems. The defoliation interval was lower in intensive (14.4 days) and higher in extensive (18.7 days) treatments. Thus, pasture intensification accelerates leaf appearance, decreases leaf lifespan, shortens the tiller defoliation interval and increased herbage accumulation rate but does not change herbage mass. The extensive system produces excessive forage losses due to dead material.

scholarly journals Physiological response of marandu grass seeds exposed to NPK fertilizer

2019 ◽  
Vol 49 (6) ◽  
Author(s):  
Luciane da Cunha Codognoto ◽  
Thassiane Telles Conde ◽  
Kátia Luciene Maltoni ◽  
Glaucia Amorim Faria ◽  
André Rodrigues dos Reis
Keyword(s):  
Production Systems ◽  
Seed Moisture Content ◽  
Randomized Design ◽  
Seed Moisture ◽  
Negative Effect ◽  
Physiological Quality ◽  
Seed Mixture ◽  
Npk Fertilizer ◽  
Completely Randomized Design ◽  
Urochloa Brizantha

ABSTRACT: To facilitate seeding process of forage species, a common practice is to mix seeds with fertilizers in monocropping and intercropping or in implementing integrated livestock production systems. However, in prolonged periods of contact, the fertilizer’s salinity and acidity negatively affect the seeds’ physiological quality. Therefore, this study intends to verify the effect of ten periods (0, 3, 6, 12, 24, 36, 48, 72, 96, and 120 hours) of exposure to granular NPK fertilizer 04-30-16 on the vigor and germination of Urochloa brizantha cv. Marandu seeds. The experiment was conducted in a completely randomized design with three replication. The fertilizer and seed mixture registered a negative effect on seed moisture content, electrical conductivity, emergence, emergence speed index, and seedling and radicle length as the period of exposure to the fertilizer increased from 3 to 120 hours.

scholarly journals Conditioning and coating of Urochloa brizantha seeds associated with inoculation of Bacillus subtilis1

2019 ◽  
Vol 49 ◽  
Author(s):  
Antônio Emilio Rodrigues Manrique ◽  
Rita de Cássia Lima Mazzuchelli ◽  
Ademir Sergio Ferreira Araujo ◽  
Fabio Fernando de Araujo
Keyword(s):  
Plant Growth ◽  
Growth Promotion ◽  
Seed Storage ◽  
Forage Plants ◽  
Technological Advances ◽  
Randomized Design ◽  
Urochloa Brizantha ◽  
Shoot Mass ◽  
And Control ◽  
And Storage

ABSTRACT Technological advances for improving the sowing stage of forage plants are important because, besides increasing the operation efficiency, they may also positively affect the plant growth. This study aimed to evaluate the inoculation of Bacillus subtilis in Urochloa brizantha seeds, using coating, physiological conditioning and storage procedures, as well as to observe its effects on seed storage and plant growth. A completely randomized design, in a 2 × 3 × 5 + 1 factorial scheme [two inoculation procedures (coating and conditioning), three inoculants (B. subtilis AP-3, B. subtilis PRBS-1 and without bacteria), five storage periods (0, 30, 60, 90 and 120 days) and control (bare seeds)], with five replicates, was used. Two lots of U. brizantha seeds were used, characterized as being of higher and lower viability. After the treatments, part of the seeds was employed to evaluate the plant growth promotion in a greenhouse, during 180 days, while the remaining portion was stored at a temperature of 25 ºC, with the seed germination being evaluated every 30 days, for 120 days. The physiological conditioning showed the best performance in the evaluations carried out for U. brizantha seeds with B. subtilis. The coating and conditioning of the U. brizantha seeds with lower viability, both with and without the inoculation of bacteria, increases the shoot mass of plants after 180 days of growth.

scholarly journals Structural and Productive Characteristics of Urochloa Cultivars Submitted to Different Defoliation Frequencies in Semiarid Region

2019 ◽  
Vol 7 (2) ◽  
pp. 91
Author(s):  
Jacqueline Dos Santos Oliveira ◽  
João Virgínio Emerenciano Neto ◽  
Rodrigo Da Silva Santos ◽  
Breno Ramon de Souza Bonfim ◽  
Fábio Nunes Lista ◽  
...  
Keyword(s):  
Leaf Blade ◽  
Production Systems ◽  
Semiarid Region ◽  
High Dry Matter ◽  
Randomized Design ◽  
Matter Production ◽  
Urochloa Decumbens ◽  
Cutting Interval ◽  
Defoliation Frequency ◽  
Urochloa Brizantha

This study assessed the effect of three cutting intervals (30, 45 and 60 days) on structural and production features of five different cultivars (Urochloa Brizantha: Marandu, Piatã and Xaraés; Urochloa decumbens: Basilisk; Urochloa hybrid: Mulato I). The experiment was carried out in a completely randomized design. The interaction between the defoliation frequency and the cultivars not significant to the length and width of the leaf blade, the diameter of the stem, and the number of living leaves. There was no effect of the cutting intervals on the width of the leaf blade, and the number or living leaves. The length and width of the leaf blade were highest in the Xaraés grass. The diameter of the stem, the height canopy and the forage mass grew as a function of the cutting interval. Cv. Xaraés displayed the highest heights and was the most productive. Stems and leaves masses, and the accumulation rates grew with the increase of the cutting intervals. The ratio leaf blade stem decreased as increasing the cutting intervals. Urochloa pastures should be handled with defoliation frequencies up to 45 days. Cv. Xaraés displays a high dry matter production and we suggest its use in intensive production systems.

scholarly journals Ostrich - A diversification option for east coast farms?

1996 ◽  
pp. 273-277 ◽  
Author(s):  
C.D.A. Brown ◽  
K.F. Thompson
Keyword(s):  
New Zealand ◽  
East Coast ◽  
Production Systems ◽  
Low Cost ◽  
Farming Systems ◽  
International Markets ◽  
Reproduction Rate ◽  
Low Cholesterol ◽  
By Products

Ostrich are currently being promoted as an alternative to sheep, cattle and deer. Although current bird prices are not sustainable, New Zealand and overseas experience to date suggest ostrich can be farmed successfully and profitability long term. Climate and terrain of the east coast of New Zealand suit ostrich physical requirements. It has been suggested that production systems will develop in which grazed herbage will provide 60% or more of the nutritional requirements. The ability to graze low-cost herbage combined with a reproduction rate of about 25 progeny per hen per year indicate that ostrich production systems may be three times more efficient than beef or deer at turning feed into lean meat. The low fat and low cholesterol meat is likely to be the primary product and is already being sold in international markets. There is also a market for the leather, feathers and oil by-products. Keywords: diversification, east coast, farming systems, meat, ostrich

scholarly journals Long-term phosphate fertilization, mycorrhizal inoculation and historical land use influence on soybean growth and P uptake

2016 ◽  
Vol 40 (4) ◽  
pp. 418-431 ◽  
Author(s):  
Paulo Emílio Ferreira da Motta ◽  
José Oswaldo Siqueira ◽  
Bruno Teixeira Ribeiro ◽  
Lloyd Darrell Norton ◽  
Sérgio Henrique Godinho Silva ◽  
...  
Keyword(s):  
Land Use ◽  
Tropical Soils ◽  
Dry Mass ◽  
P Uptake ◽  
Randomized Design ◽  
Phosphate Fertilization ◽  
Mycorrhizal Inoculation ◽  
Historical Land Use ◽  
Chemical Attributes

ABSTRACT Phosphorus is a key-nutrient in the fertility management of highly weathered tropical soils. So, this work was carried out with the objective of evaluating the influence of the interaction between P doses, mycorrhizal inoculation and historical land use on soybean growth and P uptake in five Latosols (Oxisols) with contrasting chemical, physical and mineralogical properties under a continuous long-term phosphate fertilization (more than 15 years). The plants were cultivated in 4.5L-plastic pots containing 4 kg of soil in a completely randomized design, four replications and 2x2x2 factorial scheme with two P doses; and with or without mycorrhizal inoculation; and soils cultivated for long periods and non-cultivated (under native vegetation). There were two cultivations of ten weeks each. Shoot dry mass, P content and accumulation in the shoot dry mass were evaluated after each cultivation period. The cultivation history reduced the response to P application and inoculation. The soybean response to inoculation was greater in cultivated soils and when the lower P dose was applied. The soybean response magnitude to these variables was different among the studied Latosols. The mineralogical and chemical attributes of the Latosols were determinants.

Development of a Synthetic Training Model for Canine Thoracocentesis

2020 ◽  
Vol 48 (2) ◽  
pp. 78-84
Author(s):  
Nicolas Haller ◽  
Jacob Reiss ◽  
Frank Seipel ◽  
Robert Weishar ◽  
Zachary Alden ◽  
...  
Keyword(s):  
Low Cost ◽  
Training Model ◽  
Immediate Feedback ◽  
Veterinary Students ◽  
Long Term Storage ◽  
Procedural Complications ◽  
Efficient Alternative ◽  
Cadaveric Model ◽  
Term Storage

Thoracocentesis, a procedure in which air or fluid is removed from the pleural space, is used to relieve respiratory distress, and as a diagnostic procedure in human and veterinary medicine. Veterinary students commonly learn and practice the procedure on canine cadavers which are in limited supply and are not amenable to long-term storage and use. Practicing thoracocentesis on a cadaveric model also provides limited feedback indicative of success and/or procedural complications. One commercial model for practicing canine thoracocentesis is available, but it costs over US$2000 and is excessively bulky. In order to improve the learning process for veterinary students, we have developed a reusable synthetic canine thorax model that accurately replicates the thoracocentesis procedure, provides immediate feedback to the students and reduces the need for canine cadavers. The low cost of our product provides an efficient alternative to cadavers for instruction in veterinary schools or hospitals.

Fine Particle Mass Monitoring with Low-Cost Sensors: Corrections and Long-Term Performance Evaluation

2019 ◽  
Author(s):  
Carl Malings ◽  
Rebecca Tanzer ◽  
Aliaksei Hauryliuk ◽  
Provat K. Saha ◽  
Allen L. Robinson ◽  
...  
Keyword(s):  
Performance Evaluation ◽  
Fine Particle ◽  
Low Cost ◽  
Particle Mass ◽  
Long Term Performance ◽  
Term Performance

Causes of gear pump fails and methods for their elimination

2020 ◽  
pp. 98-107
Author(s):  
Vitaliy A. Zuyevskiy ◽  
Daniil O. Klimyuk ◽  
Ivan A. Shemberev
Keyword(s):  
Adhesion Strength ◽  
Production Systems ◽  
Low Cost ◽  
High Strength ◽  
Strength Properties ◽  
Research Purpose ◽  
Working Fluid ◽  
Gear Pump ◽  
Repair Service ◽  
Recovery Method

Gear pumps are an important element of many production systems and their replacement in case of failure can be quite expensive, so it is important to have a modern and well-tuned technology for their recovery. There are many methods for restoring the pump's performance, depending on the reason that led to its failure. (Research purpose) The research purpose is in determining what causes most often lead to loss of pump performance, and developing a recovery method that provides the greatest post-repair service life of the pump and low cost of repair. (Materials and methods) Authors took into account that the applied coatings must have sufficient adhesion strength and resistance to mechanical, thermal and corrosion loads during operation. It was found that most often significant leaks of the working fluid, leading to failure, occur due to an increase in the gap between the inner surface of the housing and the gears due to active wear of the housing wells. Authors determined that the method of electric spark treatment of worn-out housing wells is best suited to perform the task (a large post-repair resource and low costs). (Results and discussion) It was found by laboratory studies of the adhesion strength of electric spark coatings with various electrodes that the best transfer of the material to the substrate is provided by bronze electrodes BrMKts3-1. It was noted that the coatings applied using the BrMKts3-1 electrode have high strength properties. (Conclusions) Research conducted in the center for collective use "Nano-Center" VIM confirmed the possibility of effective recovery of the gear pump by electric spark treatment.

scholarly journals Wittichenite semiconductor of Cu3BiS3 films for efficient hydrogen evolution from solar driven photoelectrochemical water splitting

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Dingwang Huang ◽  
Lintao Li ◽  
Kang Wang ◽  
Yan Li ◽  
Kuang Feng ◽  
...  
Keyword(s):  
Hydrogen Evolution ◽  
Water Splitting ◽  
Low Cost ◽  
Solar Hydrogen ◽  
Onset Potential ◽  
Term Stability ◽  
Long Term Stability ◽  
Solar Water Splitting ◽  
Current Densities

AbstractA highly efficient, low-cost and environmentally friendly photocathode with long-term stability is the goal of practical solar hydrogen evolution applications. Here, we found that the Cu3BiS3 film-based photocathode meets the abovementioned requirements. The Cu3BiS3-based photocathode presents a remarkable onset potential over 0.9 VRHE with excellent photoelectrochemical current densities (~7 mA/cm2 under 0 VRHE) and appreciable 10-hour long-term stability in neutral water solutions. This high onset potential of the Cu3BiS3-based photocathode directly results in a good unbiased operating photocurrent of ~1.6 mA/cm2 assisted by the BiVO4 photoanode. A tandem device of Cu3BiS3-BiVO4 with an unbiased solar-to-hydrogen conversion efficiency of 2.04% is presented. This tandem device also presents high stability over 20 hours. Ultimately, a 5 × 5 cm2 large Cu3BiS3-BiVO4 tandem device module is fabricated for standalone overall solar water splitting with a long-term stability of 60 hours.

Sign in / Sign up

Export Citation Format

Share Document