Mathematical model of management of recirculation of motor aggregates

2017 ◽  
Vol 12 (2) ◽  
pp. 25-35 ◽  
Author(s):  
A. E. Abbasov
Keyword(s):  
Mathematical Model ◽  
Combustion Temperature ◽  
Three Dimensional ◽  
Motor Units ◽  
Toxic Substances ◽  
Model Of Management ◽  
Calculation Results ◽  
Control Dependence ◽  
Maximum Combustion Temperature ◽  
The Mathematical Model

A mathematical model of management of recirculation of motor units is developed. It is shown that the efficiency of recirculation control is achieved with a decrease in the content of toxic substances in the exhaust; Limiting the maximum combustion temperature of the fuel and the pressure in the combustion chamber; Speed control. Based on the mathematical model, an algorithm is developed for calculating the control dependence for the regulation of the position of the electromechanical recirculation valve in specialized graphic computer environments with three-dimensional and two-dimensional visualization of analysis and calculation results. Calculation of the amount of emissions of harmful substances without the developed algorithm and using the developed algorithm is carried out.

Research on cargo-loading optimization based on genetic and fuzzy integration

2021 ◽  
Vol 40 (4) ◽  
pp. 8493-8500
Author(s):  
Yanwei Du ◽  
Feng Chen ◽  
Xiaoyi Fan ◽  
Lei Zhang ◽  
Henggang Liang
Keyword(s):  
Genetic Algorithm ◽  
Mathematical Model ◽  
Three Dimensional ◽  
Distribution Center ◽  
Long Time ◽  
Low Efficiency ◽  
Decision Making Model ◽  
The Mathematical Model ◽  
Loading Scheme

With the increase of the number of loaded goods, the number of optional loading schemes will increase exponentially. It is a long time and low efficiency to determine the loading scheme with experience. Genetic algorithm is a search heuristic algorithm used to solve optimization in the field of computer science artificial intelligence. Genetic algorithm can effectively select the optimal loading scheme but unable to utilize weight and volume capacity of cargo and truck. In this paper, we propose hybrid Genetic and fuzzy logic based cargo-loading decision making model that focus on achieving maximum profit with maximum utilization of weight and volume capacity of cargo and truck. In this paper, first of all, the components of the problem of goods stowage in the distribution center are analyzed systematically, which lays the foundation for the reasonable classification of the problem of goods stowage and the establishment of the mathematical model of the problem of goods stowage. Secondly, the paper abstracts and defines the problem of goods loading in distribution center, establishes the mathematical model for the optimization of single car three-dimensional goods loading, and designs the genetic algorithm for solving the model. Finally, Matlab is used to solve the optimization model of cargo loading, and the good performance of the algorithm is verified by an example. From the performance evaluation analysis, proposed the hybrid system achieve better outcomes than the standard SA model, GA method, and TS strategy.

scholarly journals ПОБУДОВА МАТЕМАТИЧНОЇ МОДЕЛІ СКЛАДНОГО РУХУ ФЛАКОНІВ НА ЛІНІЯХ РОЗЛИВУ ЛІКІВ ФАРМАЦЕВТИЧНОЇ ПРОМИСЛОВОСТІ

2012 ◽  
Author(s):  
N. О. Kravets
Keyword(s):  
Mathematical Model ◽  
Experimental Evaluation ◽  
Theoretical Dependence ◽  
Complex Product ◽  
Lateral Lines ◽  
Calculation Results ◽  
The Mathematical Model

The  mathematical model of the complex product motion along the lateral lines at the plate conveyers of the bottle lines is presented in the artcle. The experimental evaluation of the gained theoretical dependence is suggested.   The calculation results coordinate well with the modelling and experiment resuls.

Simulation Investigation on Environment-Induced Pitting Corrosion on the Metal Surface

2021 ◽  
Vol 13 (5) ◽  
pp. 820-828
Author(s):  
Wei Zhang ◽  
Shengli Lv ◽  
Leijiang Yao ◽  
Xiaoyan Tong
Keyword(s):  
Mathematical Model ◽  
Pitting Corrosion ◽  
Three Dimensional ◽  
Corrosion Damage ◽  
Sudden Onset ◽  
Ion Concentration ◽  
Two Dimensional Image ◽  
Aging Aircraft ◽  
Efficient Calculation ◽  
The Mathematical Model

The prediction of corrosion damage is one of effective research methods in the safety inspection of aging aircraft structures. A mathematical model for quantifying corrosion damage is used in this paper to predict the onset of corrosion on structural surfaces exposed to aggressive environments. Based on the finite difference technique, the evolution process of local pitting corrosion on the surface of aluminum alloy in the medium is simulated, which can consider the sudden onset and the randomness of pitting corrosion. The effect of local ion concentration and oxide film damage on subsequent pitting nucleation was analyzed. Based on the efficient calculation program, the effectiveness of the mathematical model is verified by the comparison between the corrosion damage morphology and the experimental data in the literature. The results show a more widespread distribution of subsequent pits because of stronger aggressive ions are released during the life cycle of active pits and the higher diffusion coefficient of the aggressive ions. The three dimensional morphology is generated by image processing method based on the gray value of the two dimensional image of pits.

KINEMATIC WAVE EQUATIONS FOR MOVABLE RIVERBEDS

2021 ◽  
pp. 43-54
Author(s):  
A. N. Krutov ◽  
◽  
S. Ya. Shkol’nikov ◽  
Keyword(s):  
Mathematical Model ◽  
Numerical Method ◽  
Wave Equations ◽  
Simple Wave ◽  
Kinematic Wave ◽  
Calculation Results ◽  
Self Similar ◽  
Similar Solutions ◽  
The Mathematical Model ◽  
Good Agreement

The mathematical model of kinematic wave, that is widely used in hydrological calculations, is generalized to compute processes in deformable channels. Self-similar solutions to the kinematic wave equations, namely, the discontinuous wave of increase and the “simple” wave of decrease are generalized. A numerical method is proposed for solving the kinematic wave equations for deformable channels. The comparison of calculation results with self-similar solutions revealed a good agreement.

Аpplication of the mathematical model of human torso for modeling abbreval influence in wound ballistics

2020 ◽  
Vol 22 (3) ◽  
pp. 132-139
Author(s):  
A. V. Denisov ◽  
M. D. Stepanov ◽  
N. A. Haraldin ◽  
A. V. Stepanov ◽  
A. I. Borovkov ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Element Model ◽  
Mechanical Action ◽  
Calculation Model ◽  
Calculation Results ◽  
Automated Processing ◽  
Original Calculation ◽  
Using Data ◽  
The Mathematical Model ◽  
Selection Of

Abstract. In the work, a review of scientific articles on the behavior of tissues and organs of the human body under local mechanical effects on it, as well as a description of the physico-mechanical properties of biological materials. The selection of mechanical behavior for each biological material as part of a mathematical model of the human torso was carried out, its finite element model was created, validation experiments were modeled using data presented in the literature. An original calculation model of a human torso with a tuned interaction of organs with each other was developed. Contact interaction parameters are determined. The developed computational model of a human torso was verified based on data from open sources for an experiment with mechanical action by a cylindrical impactor. An algorithm for processing pressure and acceleration graphs has been implemented in order to obtain tolerance curves. A specialized modular program has been created for the automated processing of calculation results and the output of the main results. 42 numerical tests were carried out simulating the entry of a steel ball into each of 21 zones for power engineers of 40 and 80 J. According to the results of the tests for each organ, pressure and acceleration tolerance curves were obtained, animations of the behavior of organs under shock were created, visualization of the pressure field propagation in organs was obtained torso.

scholarly journals Study on the Mathematical Model of Vacuum Breaker Valve for Large Air Mass Conditions

Water ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1358
Author(s):  
Zhang ◽  
Fan ◽  
Yu ◽  
Zhang ◽  
Lv ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Theoretical Basis ◽  
Isothermal Process ◽  
Air Mass ◽  
Protection Scheme ◽  
Calculation Results ◽  
Air Valve ◽  
The Mathematical Model ◽  
Valve Model ◽  
Derivation Process

The mathematical model of vacuum breaker valve is significant to the protection scheme. The more accurate the vacuum breaker valve model, the more reliable the calculation results. In this study, the application conditions of the air valve model are analyzed according to the assumptions used in the derivation, and the contradictions between these assumptions are proposed. Then, according to the different working characteristics between the vacuum breaker valve on the siphon outlet pipe and the air valve, the vacuum breaker valve model is deduced based on the modified assumptions. In the derivation process, the thermodynamic change of the gas in the vacuum breaker valve is assumed to follow the isentropic process rather than an isothermal process, and the water level in the vacuum breaker valve is considered to be changeable. An engineering case is introduced, and the results calculated according to the vacuum breaker valve model are compared with those resulting from the air valve model. The results indicate that the vacuum breaker valve model is suitable for large air mass conditions and can provide a theoretical basis for the numerical simulation and settings of vacuum breaker valves.

Mathematical modeling of a generic multi-profile form milling cutter

2012 ◽  
Vol 227 (5) ◽  
pp. 1036-1046 ◽  
Author(s):  
Mohammed Rajik Khan ◽  
Puneet Tandon
Keyword(s):  
Mathematical Model ◽  
Three Dimensional ◽  
Sculptured Surfaces ◽  
Three Dimensional Model ◽  
Machining Time ◽  
Milling Cutter ◽  
Machined Parts ◽  
Rotary Cutting ◽  
Three Dimensional Models ◽  
The Mathematical Model

In order to machine multiple sculptured surfaces with reduced machining time and high accuracy of the machined parts, shape design of a customised multi-point rotary cutting tool needs to be evolved. In the present work, a novel design of a generic multi-profile form milling cutter is developed for machining various multiple sculptured surfaces. This article describes in detail the mathematical model to design an accurate three-dimensional geometry of a generic multi-profile form milling cutter. Use of non-uniform rational B-spline curve(s) and sweep surfaces enables to control the shape of cutting flutes of the generic multi-profile form milling cutter. The article also discusses the methodology to develop a variety of cutters lying in the same conceptual family of multi-profile form milling cutter. To physically visualise the cutter and to show one of the downstream applications once a three-dimensional model of the cutter is available, one of the multi-profile form milling cutters is fabricated. The proposed methodology offers an intuitive high-quality mathematical model for a generic family of multi-profile form milling cutters, which is different from the traditional three-dimensional models.

Computations of Three-Dimensional Gas-Turbine Combustion Chamber Flows

1979 ◽  
Vol 101 (3) ◽  
pp. 326-336 ◽  
Author(s):  
M. A. Serag-Eldin ◽  
D. B. Spalding
Keyword(s):  
Mathematical Model ◽  
Turbulent Flows ◽  
Combustion Process ◽  
Three Dimensional ◽  
Solution Algorithm ◽  
Physical Models ◽  
Turbulence Energy ◽  
Experimental Conditions ◽  
Diffusion Controlled ◽  
The Mathematical Model

The paper presents a mathematical model for three-dimensional, swirling, recirculating, turbulent flows inside can combustors. The present model is restricted to single-phase, diffusion-controlled combustion, with negligible radiation heat-transfer; however, the introduction of other available physical models can remove these restrictions. The mathematical model comprises differential equations for: continuity, momentum, stagnation enthalpy, concentration, turbulence energy, its dissipation rate, and the mean square of concentration fluctuations. The simultaneous solution of these equations by means of a finite-difference solution algorithm yields the values of the variables at all internal grid nodes. The prediction procedure, composed of the mathematical model and its solution algorithm, is applied to predict the fields of variables within a representative can combustor; the results are compared with corresponding measurements. The predicted results give the same trends as the measured ones, but the quantitative agreement is not always acceptable; this is attributed to the combustion process not being truly diffusion-controlled for the experimental conditions investigated.

Design Method of Self-Loading Device of the Side-Crane Used for Container

2012 ◽  
Vol 466-467 ◽  
pp. 951-955
Author(s):  
Jun Qing Zhan ◽  
Xiao Mei Feng ◽  
Li Shun Li ◽  
Xiang De Meng
Keyword(s):  
Mathematical Model ◽  
Structural Design ◽  
Design Method ◽  
The Self ◽  
Design Calculation ◽  
Force Analysis ◽  
Loading Device ◽  
Calculation Results ◽  
The Mathematical Model ◽  
Flat Ground

The self-loading device used for side-crane is put forward. Its structure is presented. Based on the force analysis when the side-crane works at flat ground, the mathematical model is established when the crane working at uneven ground. And the design calculation is performed. The self-loading device’s optimal design is accomplished. Based on the above calculation results, the self-loading prototype is manufactured. And the design method can be adopted to the similar equipment’s structural design.

Research on the Convergence Condition of Iterative Solution for the Mathematical Model of Reservoir Power Generation Optimization

2020 ◽  
Author(s):  
Anqi Tan ◽  
Senlin Chen
Keyword(s):  
Mathematical Model ◽  
Power Generation ◽  
Iterative Process ◽  
Iterative Solution ◽  
Scheduling Optimization ◽  
Convergence Conditions ◽  
Generation Scheduling ◽  
Solution Convergence ◽  
Calculation Results ◽  
The Mathematical Model

<p>Discrete differential dynamic programming algorithm is widely used in reservoir power generation dispatching, but the problem of "dimensional disaster" still exists, and there are different degrees of limitations such as premature convergence and uncertainty of convergence. In the existing monographs and literature, there is little research on the algorithm itself. The iterative solution convergence conditions, initial parameters, and initial trajectory selection of the mathematical model for reservoir power generation scheduling optimization have important effects on the iterative process and results. The convergence conditions directly determine when the iterative process converges and its calculation results. In this paper, the solution convergence conditions are studied. Based on the calculation results of the mathematical model of reservoir power generation scheduling optimization, the method of iteratively solving the convergence conditions when different state quantities are used as control factors is systematically studied. Shuibuya Hydropower Station Scheduling results show that using this method to determine the termination step size can shorten the calculation time and obtain an optimization result close to the ideal value, avoid the randomness of the convergence process of the iterative solution, and improve the accuracy of the DDDP algorithm and the efficiency of the target value.</p>

Sign in / Sign up

Export Citation Format

Share Document