scholarly journals Yak Meat as a Lucrative Raw Material for Meat Products

2019 ◽  
Vol 48 (3) ◽  
pp. 16-33
Author(s):  
Баяна Баженова ◽  
Bayana Bazhenova ◽  
Юлия Забалуева ◽  
Yuliya Zabalueva ◽  
Михаил Данилов ◽  
...  
Keyword(s):  
Nutritional Value ◽  
Experimental Studies ◽  
Meat Products ◽  
Raw Material ◽  
Farm Animals ◽  
Meat Production ◽  
Academic Literature ◽  
Production And Consumption ◽  
The Republic ◽  
Taste And Smell

The present research features comparative data on the dynamics of meat production and consumption in the Republic of Buryatia. The analysis revealed stability and a slight increase in meat production and consumption per capita. The main sources of raw meat in Buryatia are cattle, sheep, and pigs, whereas goats, horses, and yaks make up a small part of farm animals in the region and serve as an additional source of valuable animal protein. The article contains a review of academic literature that showed a growing interest in yak meat studies, e.g. its nutritional value and use in meat products. The present research demonstrated that the nutritional and biological value of yak meat was similar to beef. However, yak meat proved to be tough, dark in color, and with a specific taste and smell. According to the experimental studies, the nutritional value of yak meat depends on the altitude of habitat. For instance, the higher the altitude, the larger the content of polyunsaturated fatty acids. The content of connective proteins, which can affect the consistency of the end product, was higher by 12.1% in yak meat than in beef. The experiment showed that the process of glycolysis in yak meat was 24 hours longer than in beef. The yak meat was tough due to the higher level of connective proteins, while its darker colour could be explained by the high content of myoglobin. These properties should be taken into account in the production of highquality meat products.

scholarly journals Stated Preferences for Plant-Based and Cultured Meat: A Choice Experiment Study of Spanish Consumers

2021 ◽  
Vol 13 (15) ◽  
pp. 8235
Author(s):  
Alfredo J. Escribano ◽  
Maria Belen Peña ◽  
Carlos Díaz-Caro ◽  
Ahmed Elghannam ◽  
Eva Crespo-Cebada ◽  
...  
Keyword(s):  
Choice Experiment ◽  
Meat Products ◽  
Meat Production ◽  
Experiment Study ◽  
Negative Effects ◽  
High Quality ◽  
Cultured Meat ◽  
Production And Consumption ◽  
Alternative Sources ◽  
Negative Impacts

Meat production and consumption have been claimed to have negative impacts on the environment, and even on the consumer’s health. In this sense, alternative sources of protein, mainly meat substitutes and cultured meat, have emerged due to those perceived negative effects. Our paper carries out a choice experiment to analyze the preferences of 444 Spanish consumers and their willingness to pay for plant-based and cultured meats, as compared to conventional meat. Spain was considered of interest for this study due to its significant gastronomic culture, with high-quality meat products that make a great contribution to the economy, meaning that this could be a suitable and also challenging market in which to test alternative sources of protein. The findings show that consumers’ motivations and their interactions with these products are complex. Additionally, a cluster analysis allowed us to identify three types of consumers in terms of preference for these products: price-sensitive millennials, conscious/concerned consumers, and indifferent consumers. Only one group showed some level of acceptance of these alternative products meats.

Effect of Physico-chemical Characteristics of Raw Muscles from Three Iberian × Duroc Genotypes on Dry-cured Meat Products Quality

2007 ◽  
Vol 13 (6) ◽  
pp. 485-495 ◽  
Author(s):  
M.R. Ramirez ◽  
R. Cava
Keyword(s):  
Sensory Quality ◽  
Meat Products ◽  
Biceps Femoris ◽  
Raw Material ◽  
Meat Production ◽  
Reciprocal Crosses ◽  
Physico Chemical ◽  
Cured Meat ◽  
The Difference

The effect of raw material characteristics (longissimus dorsi and biceps femoris) on dry-cured loin and ham quality from three different Iberian · Duroc genotypes was studied: GEN1: ♂ Iberian · ♀ Duroc1, GEN2: ♂ Duroc1 · ♀ Iberian; GEN3: ♂ Duroc2 · ♀ Iberian. GEN1 and GEN2 are reciprocal crosses, while the difference between GEN2 and GEN3 is the Duroc sire line. The line Duroc1 (DU1) was selected for the manufacture of dry-cured meat products, whereas the line Duroc2 (DU2) was selected for meat production with low carcass fat. Raw material and dry-cured meat products did not differ between reciprocal crosses (GEN1 vs. GEN2). However, the genotype of the Duroc sire line affected the quality of meat and dry-cured meat products. GEN1 and GEN2 had higher adipogenic nature and higher postmortem pH than GEN3, and as a result, these dry-cured meat products had better instrumental and sensory quality than those from GEN3. By contrast, meat from GEN3 had lower pH, fat content, and oxidative stability which decreased the quality of dry-cured meat products. Therefore, there was a close connection between raw material and dry-cured meat products quality as it was affected by characteristics related to the genotype such as the adipogenic character and meat quality traits associated with pH.

scholarly journals Current state and development trends of livestock in the Republic of Kazakhstan

2021 ◽  
Vol 16 (2) ◽  
pp. 134-144
Author(s):  
S. M. Yessengaliyeva ◽  
M. A. Mansurova ◽  
A. D. Makhmudov ◽  
L. V. Fedorchenko
Keyword(s):  
Negative Impact ◽  
Low Cost ◽  
Meat Products ◽  
Animal Husbandry ◽  
Farm Animals ◽  
Industrial Complex ◽  
Resource Saving ◽  
Livestock Industry ◽  
Current State ◽  
The Republic

The article is devoted to the study and analysis of the current state of the animal husbandry industry in the Republic of Kazakhstan in the context of regions. The indicators of the dynamics of the number of livestock of farm animals for the period 2015-2019 by regions, indicators of productivity in the industry, indicators of the volume of production of meat products are analyzed. The dynamics and structure of costs in the country’s livestock industry are also considered.Today, one of the most pressing problems in the development of the agro-industrial complex is the low level of labor productivity due to low automation and digitalization of technological processes. The need to meet the demand for livestock products in the domestic market of the Republic of Kazakhstan, as well as to increase its export resources, poses a challenge for Kazakhstani science and practice to develop, scientifically substantiate and master modern technologies for the production of low-cost, environmentally friendly, competitive products of the industry. They should be resource-saving, aimed at maximizing the use and improvement of the genetic potential of farmed farm animals, adapted to the specific natural and economic conditions of the regions of the republic. The development and mastering of such technologies will make it possible to weaken the negative impact of the industry on the environment, reduce the cost of material resources, and effectively use the available land and water resources [5].The main problems hindering the effective development of the country’s livestock industry are identified. The promising strategic directions for the development of this industry have been determined. From the point of view of experts of the financial organization, the country has good potential and opportunities to export its beef and pork to China, and the lamb of the Edilbay sheep breed to the countries of the Middle East.

scholarly journals Scientific foundations of digitalization of agro-industrial production

2021 ◽  
pp. 55-61
Author(s):  
S. M. Yessengaliyeva ◽  
◽  
A. I Gizzatova ◽  
B. K. Rakhimgaliyev ◽  
◽  
...  
Keyword(s):  
Meat Products ◽  
Animal Husbandry ◽  
Well Being ◽  
Government Support ◽  
Meat Production ◽  
Industrial Complex ◽  
Meat Industry ◽  
Livestock Farming ◽  
Cattle Breeding ◽  
The Republic

The relevance of this topic of the article is associated with the need to automate and digitalize the branches of agro-industrial complex of the Republic of Kazakhstan, ensuring the country's food security and improving the well-being of the rural population. The main problems of the development of animal husbandry in the republic are considered. The structure of its production by farm categories has been analyzed. It has been determined that about 55% of the industry's products are provided by the households, which contain 55.3% of the cattle population. The purpose of the study is to justify the need to increase the volume of beef cattle breeding through the use of innovative technologies and digitalization of livestock farms, as well as the development and scientific confirmation of rational options and technical solutions for low-cost, environmentally friendly meat production technologies. The work uses the methods of economic and statistical analysis, which consists in summarizing statistical data, illustrative presentation of factual information, etc. Results – the authors state that meeting the existing high demand for Kazakhstani meat products in domestic and foreign markets currently requires a transfer and adaptation of highly efficient technologies based on automation and digitalization of production processes in livestock farming, taking into account the objective conditions in the regions of the country. The data on technology of organizing winter and cultivated pastures in cattle breeding, pasture rotation, seasonal rotations, preparation of scientifically grounded feeding rations, the choice of machines and equipment for the automation of technological processes are presented. An economic assessment of the effectiveness of creating model farms by levels of digitalization was carried out: basic, advanced, digital; indicators of labor productivity, payback period are calculated. The conclusions indicate the need to increase government support for the meat industry.

scholarly journals Investigation of organoleptic and functional-technological parameters of meat breads using mechanically deboned poultry meat

2019 ◽  
Vol 21 (91) ◽  
pp. 3-8 ◽  
Author(s):  
V. I. Tischenko ◽  
N. V. Bozhko ◽  
V. M. Pasichnyi ◽  
V. V. Brazhenko
Keyword(s):  
Nutritional Value ◽  
Raw Materials ◽  
Control Sample ◽  
Meat Products ◽  
Nutrient Deficiency ◽  
Raw Material ◽  
Poultry Meat ◽  
Material Base ◽  
Technological Parameters ◽  
Minced Meat

Creation of combined meat products combining traditional consumer properties, as well as the possibility of using non-traditional raw materials in their recipes, is aimed at the expansion and rational use of the raw material base of the meat processing complex and solves the problem of reducing nutrient deficiency in the diet of the population. Therefore, the issue of the use of mechanically deboned poultry meat in meat bread technology and its impact on qualitative indicators and functional and technological properties is relevant. The aim of the research was to study the feasibility of the use of mechanically deboned poultry meat in the technology of combined products. Three model recipes based on the formula-meat analogue “Chainyyi” were developed. The possibility of replacing beef and pork meat with duck meat and mechanically deboned poultry meat of turkey was studied in the bread recipes. The total amount of duck meat and mechanically deboned poultry meat was 63%. As a protein ingredient able to bind moisture and relatively inexpensive compared to meat raw material, 20% of the pig's heart was added to the formulation, as well as 2% XB Fiber. Other components of the analogue formulation have not changed. Combination of duck meat with mechanically deboned poultry meat of turkey and pork hearts in the abovementioned ratios as part of meatcontaining bread stuffing systems allowed to improve the nutritional value of the product and its qualitative indices. The research confirmed the possibility of combining regional and relatively cheap raw materials to increase the nutritional value of meatcontaining products, namely breads. The bulk of proteins in the experimental samples increased by 6.57–10.38% and was within the range of 17.96–17.34%. On average, 4.98% decreased the fat content, the product became less calorie relative to the analogue by 15.98–16.76%. The formulations of model minced meat were distinguished by a higher index of the water-holding capacity, the content of binding moisture and the best indicators of plasticity. This affected the quantity of finished products, which amounted to 120.64–117.3% to the mass of raw materials, while in the control sample this figure was lower by 3.49–7.47%.

scholarly journals INNOVATIVE PROCESSES IN THE BEEF CATTLE INDUSTRY

2020 ◽  
Vol 4 ◽  
pp. 175-182
Author(s):  
K.M. MADENOVA ◽  
Keyword(s):  
Beef Cattle ◽  
Agricultural Sector ◽  
Meat Products ◽  
Animal Husbandry ◽  
Innovative Activity ◽  
Innovation Activity ◽  
Meat Production ◽  
Industrial Complex ◽  
Cattle Breeding ◽  
The Republic

The article is devoted to the development of innovative processes in the livestock industry of meat sector. The main forms and methods of classification of innovations are studied. The features of innovative activity of enterprises of agro-industrial complex of Kazakhstan are analyzed. Indicators of innovative activity of agricultural entities of the republic in comparison with European countries are presented. The author pays main attention to the formation and development of innovative processes at enterprises for production of meat and products of its processing, which is of considerable interest, since innovative activity in this industry has its own specific features. In agricultural sector, economic and financial state of production directly depends on introduction of innovations, the use of modern innovative technologies that save resources, increase the profitability and efficiency of production system. The assessment of potential resources for the development of beef cattle breeding has been carried out, the tendencies of the growth of livestock, meat production, its import and export in recent years have been studied. The main problems of animal husbandry industry, in particular raising of beef cattle, are highlighted, conclusions about the possibility of increasing the potential of meat products are drawn. On the basis of performed analysis of the level of innovation activity, the identified problems in agricultural production, recommendations were developed for the future development of innovations in the country's beef cattle breeding, since in the new economic conditions, an important role is played by innovative developments and their application in this industry.

scholarly journals EXPERIMENTAL RESEARCH OF CHARACTERISTICS OF CRUSHERS WITH CYCLOIDAL MOTION OF WORKING BODIES

2018 ◽  
Vol 15 (30) ◽  
pp. 627-639
Author(s):  
O. Zh. RABAT ◽  
A. N. SALMANOVA
Keyword(s):  
Experimental Studies ◽  
Raw Material ◽  
Crushed Stone ◽  
Sieve Analysis ◽  
High Quality ◽  
Working Space ◽  
Stone Material ◽  
The Republic ◽  
Working Bodies ◽  
Flat Flow

The use of different crushers to obtain the required size of the stone material. This work presents experimental studies of the characteristics of a crusher with a complex movement of working organs. The objectives of the study are, a sieve analysis of the obtained product (crushed stone) and the determination of the optimal speed of the working bodies (rolls) to obtain high-quality cubic shape crushed stone. In the experiment, the raw material is fed into the working space (into the crushing chamber) through the hopper and moves by a flat flow between the rollers. The edges of the rolls roll symmetrically from two sides to the flow of material, approaching in the area of the crushing zone and diverging in the region of the unloading zone. The authors determined the optimal rolls for obtaining high-quality cubiform crushed stone (over 80%). As a result, of the research, it was established that the grain composition of the fraction is within the standard of the Republic of Kazakhstan 1225-2003 t.3 – is obtained cubiform crushed stone, with an rotational speed of rolls of 100-120 rpm.

Use of unconventional plant raw material in poultry meat recipe

2021 ◽  
Vol 67 (3) ◽  
pp. 3591-3597
Author(s):  
Aleksandr Lukin ◽  
Natalia Naumova ◽  
Julia Bets
Keyword(s):  
Organic Acids ◽  
Nutritional Value ◽  
Meat Products ◽  
Mineral Elements ◽  
Raw Material ◽  
Poultry Meat ◽  
Brazil Nut ◽  
Poultry Products ◽  
Combined Use ◽  
Freeze Dried

The results of studying the combined use of freeze-dried ground apples (in an amount of 7%) and Brazil nut kernels (in an amount of 5 %) in the technology of baked poultry products are presented. The modification of the recipe made it possible to obtain stuffed meat products with improved consumer properties (apple and nut notes in the smell, slight sourish-sweetish tone in the taste, caramel shades in the color) and increased nutritional value (content of dietary fiber, mineral elements Mo, Au, Cu, B, Mn, W, Be, Sn, Fe, Ca, Mg, P, organic acids, protein) alongside a decrease in the amount of butter by 4%.

scholarly journals The main trends and perspectives of pork production development in the world

2020 ◽  
Vol 22 (96) ◽  
pp. 21-27
Author(s):  
V. Maksym ◽  
V. Chemerys ◽  
V. Dushka ◽  
Y. Berezivskyi
Keyword(s):  
Meat Products ◽  
Meat Production ◽  
Industry Development ◽  
Pork Production ◽  
Production Development ◽  
Technological Efficiency ◽  
Production And Consumption ◽  
The World ◽  
The Usa ◽  
World Food Security

The pig breeding behaves to the most more widespread directions of stock-raising in the world, which forms considerable part in balance of meat and meat products in many countries. The level of pork production and industry development volumes on the whole substantially influences on world food security. In the article the presented results of research are in relation to consisting and basic tendencies of pork production in the world and in the separate countries where the pig breeding is most developed. Conducted analysis of hog herds dynamics production and pork volumes in the world, and also basic factors which substantially influenced on development of the pig breeding for probed period are set. Certainly structural influence of most producers of pork is in the world on the indexes of industry development. Investigational the stance of pork production, and also conducted analysis of standard purchase prices, is on pigs in different countries in the world. Presented information in relation to the structure of pork export and import in the world and in the separate countries which most influence on pork market development. Positions and influence of Ukraine are appraised at the international market of pork. The basic prospects of pork production development are set and grounded in the world and in the separate countries, in particular in Ukraine. The production of pork in the world during 2017–2019 years decrease on 8.1 %, and the pigs herd dynamic diminished on 13 %. A sharp downstream of pork herd is in the world connected with spread of dangerous infectious diseases of zoon’s, which the African swine fewer, which resulted in considerable reduction of herd and meat production particular in China on which was nearly 40 % in world production. However, compensated a downstream in countries South-East Asia in a greater measure of industry development of the pig breeding in the USA, Brazil and EU, which behave to the basic exporters of pork in the world, which is form about 85 % of global products export. One with positive factors, which in the future will assist the pig breeding development in the world there is gradual growth of pork production and consumption in the developing countries, where an increase of herd, and also increase the technological efficiency of swine growing. The considerable not realized potential of the pig breeding industry in many countries, in particular in Ukraine, which is one of most in the world producers and exporters of feed crops, necessary for industry development.

scholarly journals THE TRANSFORMATION OF PROTEIN AND DIET ENERGY INTO MEAT PRODUCTION WHEN BULLS ARE FED BY SILAGE WITH BIOLOGICAL PRESERVAT

2018 ◽  
pp. 62-66
Author(s):  
Наталья Фисенко ◽  
Natal'y Fisenko
Keyword(s):  
Meat Products ◽  
The Body ◽  
Control Group ◽  
Meat Production ◽  
Black And White ◽  
Green Mass ◽  
White Breed ◽  
The Republic ◽  
Meat Productivity

The purpose of researches is increase of meat efficiency of bull-calves of black-motley breed through the use of canned green mass of alfalfa with Laxil and Silostan when harvesting haylage. The results of the evaluation of the effect of alfalfa haylage harvested with preservatives on the efficacy of bioconversion of nutrients and energy rations in meat products. Scientific and economic experience held in the SEC-farm «Alga» Chekmagushevsky district of the Republic of Bashkortostan. There are three trench silage from alfalfa. In one of them the food was laid with the application of the preservative Laxil, the second – and third Silostan – no preservatives. Laxil preservative was added at the rate of 1 liter per 15 tons of green mass, Silostan – 1 liter to 150 tons. The object of research was 45 bulls of black-and-white breed at the age of 9 months, of which three groups were formed: control and two experienced. Gobies control group received silage of alfalfa harvested without preservatives, and the animals of I and II experimental groups – silage, preserved by Laxil and Silostan. For studying of meat productivity and quality of meat of test bulls control slaughter of 3 bulls from each group was carried out. The results of the study indicate the superiority of calves of the experimental group over their counterparts from the control groups both in vivo and post-slaughter parameters. The results of the evaluation of the transformation of protein and energy feed in the production of bulls compared groups when grown for meat indicate that in the body of young I and II experimental groups were deposited a little more protein compared with peers from the control group.

Sign in / Sign up

Export Citation Format

Share Document