Removal of C.I. Reactive Red 2 from aqueous solutions by chitin: an insight into kinetics, equilibrium, and thermodynamics

2012 ◽  
Vol 65 (3) ◽  
pp. 490-495 ◽  
Author(s):  
C. H. Wu ◽  
C. Y. Kuo ◽  
C. H. Yeh ◽  
M. J. Chen
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Kinetics ◽  
Langmuir Model ◽  
Second Order ◽  
Experimental Results ◽  
Order Model ◽  
Freundlich Model ◽  
Pseudo Second Order ◽  
Reactive Red 2 ◽  
Insight Into

In this study, C.I. Reactive Red 2 (RR2) was removed from aqueous solutions by chitin. Exactly how the RR2 concentration, chitin dosage, pH, and temperature affected adsorption of RR2 by chitin was then determined. After reaction for 120 min, the amount of 10 and 20 mg/L RR2 absorbed onto chitin was 5.7 and 7.5 mg/g, respectively. The adsorption percentage increased from 56 to 94% when the chitin dosage was increased from 1.5 to 2.5 g/L. Experimental results indicated that the pseudo-second-order model best represents adsorption kinetics. Adsorption of RR2 increased as the temperature increased; however, it decreased with an increased pH. Experimental results further demonstrated that the Freundlich model is superior to the Langmuir model in fitting experimental isotherms. The ΔH0 and ΔS0 were 16.34 kJ/mol and 152.10 J/mol K, respectively. ΔH0 suggested that adsorption of RR2 onto chitin was via physisorption.

Adsorption of Methylene Blue on Modified Bentonite

2013 ◽  
Vol 726-731 ◽  
pp. 2380-2383
Author(s):  
Li Xia Li ◽  
Xin Dong Zhai
Keyword(s):  
Methylene Blue ◽  
Aqueous Solutions ◽  
Adsorption Kinetics ◽  
Freundlich Isotherm ◽  
Batch Process ◽  
Experimental Results ◽  
Order Model ◽  
Modified Bentonite ◽  
Equilibrium Data ◽  
Pseudo Second Order

Modified bentonite was used as adsorbent for the methylene blue adsorption in a batch process. Experimental results show that the adsorption kinetics is well described by pseudo-second-order model and the equilibrium data was better represented by the Freundlich isotherm model. The results revealed that the modified bentonite has the potential to be used as a good adsorbent for the removal of methylene blue from aqueous solutions.

Adsorption Kinetics of Zn(II) from Aqueous Solutions onto Epichlorohydrin Crosslinked Chitosan

2012 ◽  
Vol 463-464 ◽  
pp. 7-11 ◽  
Author(s):  
Ming Yan Dang ◽  
Hong Min Guo ◽  
Yan Kun Tan
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Kinetics ◽  
Ph Value ◽  
Crosslinking Agent ◽  
Second Order ◽  
Order Model ◽  
Pseudo Second Order ◽  
Crosslinked Chitosan ◽  
Kinetics Of ◽  
Second Order Model

Chitosan was crosslinked using epichlorohydrin as crosslinking agent to prepare crosslinked chitosan which was used as an adsorbent for the removal of Zn(II) from aqueous solutions. The adsorption prosperities of Zn(II) on crosslinked chitosan were studied, including the influence of pH value and the adsorption kinetics. The kinetics of adsorption was discussed using two kinetic models, the pseudo first-order and the pseudo second-order model. Results reveal that the crosslinked chitosan is suitable as adsorbent to remove Zn(II) from dilute solution. The rate parameters for the Zn(II) by crosslinked chitosan were also determined. It was shown that the adsorption kinetics of Zn(II) could be best described by the pseudo second-order model and the adsorption process may involve a physical adsorption.

Adorption and Kinetics Studies of Baritite on Cr (VI) from Aqueous Solutions

2011 ◽  
Vol 347-353 ◽  
pp. 281-284
Author(s):  
Peng Ge ◽  
Li Juan Wan ◽  
Ya Jing Xu
Keyword(s):  
Experimental Data ◽  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Adsorption Kinetics ◽  
Natural Zeolite ◽  
Second Order ◽  
Order Model ◽  
Kinetics Studies ◽  
Pseudo Second Order ◽  
Kinetics Of

Among the investigated clays and minerals (kaolinite, natural zeolite, manual zeolite, bentonite, sepiolite, sepiolite amianthus, tremolite amianthus, vermiculite and baritite), the baritite clay was selected as the optimal adsorbent for aqueous Cr (VI). The Cr (VI) adsorption capacity on baritite clay reached as high as 39.01 mg∙g−1 at 20°C. Then the adsorption kinetics of Cr (VI) by the baritite clay were investigated in details. Results showed that the pseudo-second-order model was a suitable description for the adsorption kinetics and fitted well with the experimental data.

scholarly journals Removal of phosphate from coating wastewater using magnetic Fe-Cu bimetal oxide modified fly ash

2015 ◽  
Vol 6 (3) ◽  
pp. 430-436 ◽  
Author(s):  
Ke Xu ◽  
He Tao ◽  
Tong Deng
Keyword(s):  
Fly Ash ◽  
Langmuir Model ◽  
Experimental Results ◽  
Phosphate Adsorption ◽  
Order Model ◽  
Freundlich Model ◽  
Maximum Capacity ◽  
Adsorption Time ◽  
Pseudo Second Order ◽  
Modified Fly Ash

In this work, magnetic Fe-Cu bimetal oxide modified fly ash was used to remove phosphate from coating wastewater. The influences of pH, dosage amount and adsorption time on the removal of phosphate were investigated. The experimental results showed that pH had a significant effect on the adsorption of phosphate. The removal percentage of phosphate reached a maximum at pH 10. The removal efficiency of phosphate increased with the increase in adsorbent dosage. A kinetic study showed that the phosphate adsorption was well described by a pseudo second order model. The adsorption isotherm of phosphate could be described by the Langmuir model and Freundlich model. The Langmuir maximum capacity Q0 was 12.69 mg/g and the value of n of the Freundlich model was 3.82. The experimental results indicated that magnetic Fe-Cu bimetal oxide modified fly ash was a potential adsorbent for the removal of phosphate from the wastewater.

Synthesis, Characterization and Adsorption Studies of a Graphene Oxide/Polyacrylic Acid Nanocomposite Hydrogel

2021 ◽  
Vol 19 (9) ◽  
pp. 46-54
Author(s):  
Makarim A. Mahdi ◽  
Aymen A.R. Jawad ◽  
Aseel M. Aljeboree ◽  
Layth S. Jasim ◽  
Ayad F. Alkaim
Keyword(s):  
Industrial Effluents ◽  
Langmuir Model ◽  
Isotherm Models ◽  
Nanocomposite Hydrogel ◽  
Adsorption System ◽  
Order Model ◽  
Solution Ph ◽  
Freundlich Model ◽  
Dye Sorption ◽  
Pseudo Second Order

The AAc/GO nanocomposite hydrogel was successfully employed as a polymeric Nano sorbent of the removal efficiency of M G dye from the model. The complication of the mechanism of the adsorption system was completely exposed by examining how solution pH affects adsorption, Ionic strength isotherm models, kinetic models, and thermodynamics. The adsorption of the MG dye was greatly dependent on the solution pH. The Freundlich model has been demonstrated to be the most accurate in describing the MG dye sorption, whilst the Langmuir model was shown to be the least accurate. Additionally, these integrated mechanisms fit nicely within the framework of a pseudo-second-order model. Additionally, the contact time at equilibrium short (ten minutes) required to MG removes demonstrates the AAc/GO nanocomposite hydrogel can be considered an efficient and potentially useful adsorbent for MG removal from industrial effluents.

Adsorption Kinetics of Pb2+ Ions Using Chitosan Nanoparticles

2013 ◽  
Vol 367 ◽  
pp. 45-49
Author(s):  
Ying Hong ◽  
Ze Hui Zhong ◽  
You Shi Liu
Keyword(s):  
Adsorption Kinetics ◽  
Chitosan Nanoparticles ◽  
Second Order ◽  
Isotherm Model ◽  
Order Model ◽  
Adsorption Characteristics ◽  
Pseudo Second Order ◽  
Kinetics Of ◽  
Second Order Model

Chitosan nanoparticles were prepared by crosslinkingusing TPP. SEM showed that chitosan nanoparticles were successfully obtained.The adsorption characteristics of chitosan nanoparticles were evaluated. Theresults demonstrated that chitosan nanoparticles were suitable for adsorbent toremoval Pb2+. The parameters for the adsorption of Pb2+by chitosan nanoparticles were also determined. It was shown that chitosannanoparticles were fit for Langmuir’s isotherm model and that the adsorptionkinetics of Pb2+ described by the pseudo-second-order model could bebest.

Removal of hazardous pharmaceutical dyes by adsorption onto papaya seeds

2014 ◽  
Vol 70 (1) ◽  
pp. 102-107 ◽  
Author(s):  
Caroline Trevisan Weber ◽  
Gabriela Carvalho Collazzo ◽  
Marcio Antonio Mazutti ◽  
Edson Luiz Foletto ◽  
Guilherme Luiz Dotto
Keyword(s):  
Aqueous Solutions ◽  
Second Order ◽  
Isotherm Models ◽  
Order Model ◽  
Application Range ◽  
First Order ◽  
Adsorption Capacities ◽  
Effects Of Ph ◽  
Pseudo Second Order ◽  
Papaya Seeds

Papaya (Carica papaya L.) seeds were used as adsorbent to remove toxic pharmaceutical dyes (tartrazine and amaranth) from aqueous solutions, in order to extend application range. The effects of pH, initial dye concentration, contact time and temperature were investigated. The kinetic data were evaluated by the pseudo first-order, pseudo second-order and Elovich models. The equilibrium was evaluated by the Langmuir, Freundlich and Temkin isotherm models. It was found that adsorption favored a pH of 2.5, temperature of 298 K and equilibrium was attained at 180–200 min. The adsorption kinetics followed the pseudo second-order model, and the equilibrium was well represented by the Langmuir model. The maximum adsorption capacities were 51.0 and 37.4 mg g−1 for tartrazine and amaranth, respectively. These results revealed that papaya seeds can be used as an alternative adsorbent to remove pharmaceutical dyes from aqueous solutions.

scholarly journals Simultaneous Removal of Lead and Nickel Ions from Aqueous Synthetic Solutions by Chitosan Coated Cobalt Ferrite

2017 ◽  
Vol 68 (1) ◽  
pp. 1-5
Author(s):  
Rodica Elena Patescu ◽  
Claudia Maria Simonescu ◽  
Cristian Onose ◽  
Teodor Laurentiu Busuioc ◽  
Daiana Elena Pasarica ◽  
...  
Keyword(s):  
Experimental Data ◽  
Aqueous Solutions ◽  
Sorption Capacity ◽  
Cobalt Ferrite ◽  
Second Order ◽  
Simultaneous Removal ◽  
Order Model ◽  
Diffusion Kinetic ◽  
Nickel Ions ◽  
Pseudo Second Order

This research study deals with lead and nickel simultaneous removal from aqueous solutions by the use of chitosan coated cobalt ferrite as adsorbent. Batch removal tests were performed in order to establish the main parameters that influence the sorption capacity, removal efficiency and the selectivity of this adsorbent. The values of sorption capacity for lead and nickel experimentally determined are: 56.23 mg/g and respectively 45.11 mg/g. Langmuir and Freundlich adsorption isotherms were used to interpret the sorption experimental data. The kinetic data were explored by pseudo-first order, pseudo-second order and intraparticle diffusion kinetic models. The experimental data were well fitted with the pseudo-second order model for both heavy metals. The main conclusion that can be drawn from this research is that this material can be successfully used for the removal of lead and nickel from binary aqueous solutions and wastewater.

scholarly journals Application of Polyaniline Nano Composite for the Adsorption of Acid Dye from Aqueous Solutions

2012 ◽  
Vol 9 (3) ◽  
pp. 1266-1275 ◽  
Author(s):  
J.Raffiea Baseri ◽  
P.N. Palanisamy ◽  
P. Sivakumar
Keyword(s):  
Aqueous Solutions ◽  
Contact Time ◽  
Langmuir Model ◽  
Batch Adsorption ◽  
Adsorption System ◽  
Acid Dye ◽  
Order Model ◽  
Nano Composite ◽  
Pseudo Second Order ◽  
Acid Violet

In this research, Polyaniline coated sawdust (Polyaniline nano composite) was synthesized via direct chemical polymerization and used as an adsorbent for the removal of acid dye (Acid Violet 49) from aqueous solutions. The effect of some important parameters such as pH, initial concentration of dye, contact time and temperature on the removal efficiency was investigated in batch adsorption system. The adsorption capacity of PAC was high (96.84 %) at a pH of 3-4. The experimental data fitted well for pseudo second order model. Langmuir model is more appropriate to explain the nature of adsorption with high correlation coefficient. The Energy of activation from arrehenius plot suggested that the adsorption of AV49 onto PAC involves physisorption mechanism.

Removal of Congo red dye from aqueous solutions using a halloysite-magnetite-based composite

2016 ◽  
Vol 73 (9) ◽  
pp. 2132-2142 ◽  
Author(s):  
F. Ferrarini ◽  
L. R. Bonetto ◽  
Janaina S. Crespo ◽  
M. Giovanela
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Kinetics ◽  
Congo Red ◽  
Contact Time ◽  
High Efficiency ◽  
Dye Adsorption ◽  
Order Model ◽  
Congo Red Dye ◽  
Pseudo Second Order ◽  
Red Dye

Adsorption has been considered as one of the most effective methods to remove dyes from aqueous solutions due to its ease of operation, high efficiency and wide adaptability. In view of all these aspects, this study aimed to evaluate the adsorption capacity of a halloysite-magnetite-based composite in the removal of Congo red dye from aqueous solutions. The effects of stirring rate, pH, initial dye concentration and contact time were investigated. The results revealed that the adsorption kinetics followed the pseudo-second-order model, and equilibrium was well represented by the Brunauer–Emmett–Teller isotherm. The thermodynamic data showed that dye adsorption onto the composite was spontaneous and endothermic and occurred by physisorption. Finally, the composite could also be regenerated at least four times by calcination and was shown to be a promising adsorbent for the removal of this dye.

Sign in / Sign up

Export Citation Format

Share Document