Adsorption of methyl orange dye onto biochar adsorbent prepared from chicken manure

2018 ◽  
Vol 77 (5) ◽  
pp. 1303-1312 ◽  
Author(s):  
Jiangang Yu ◽  
Xingwen Zhang ◽  
Dong Wang ◽  
Ping Li
Keyword(s):  
Aqueous Solution ◽  
Methyl Orange ◽  
Chicken Manure ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
Equilibrium Data ◽  
Intra Particle Diffusion ◽  
Endothermic Process ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Abstract In this work, the biochar adsorbent carboxymethyl cellulose (CMC), was prepared from the pyrolysis (600 °C, 120 min) of chicken manure for the removal of methyl orange (MO) from aqueous solution, and its physicochemical properties were characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectra (FTIR). The experimental parameters including agitation speed, initial solution pH, biochar dosage and contact time on the adsorption properties of MO from aqueous solution onto CMC were investigated in batch experiments. The kinetic adsorption of different initial concentration could be accurately described by the pseudo-second-order model and the overall rate process was apparently influenced by external mass transfer and intra-particle diffusion. Furthermore, the Langmuir isotherm model showed a better fit with equilibrium data (R2 > 0.99), with the maximum adsorption capacity of 39.47 mg·g−1 at 25 °C. Moreover, the thermodynamic parameters indicated that the adsorption of MO onto CMC was a spontaneous and endothermic process. The results of this study indicated that CMC could be used as a promising biomass adsorbent material for aqueous solutions containing MO.

scholarly journals Adsorption of Lead(II) Ions from Aqueous Solution onto Lignin

2009 ◽  
Vol 27 (4) ◽  
pp. 435-445 ◽  
Author(s):  
Laura Bulgariu ◽  
Dumitru Bulgariu ◽  
Theodor Malutan ◽  
Matei Macoveanu
Keyword(s):  
Aqueous Solution ◽  
Ion Concentration ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Solution Ph ◽  
Batch System ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The adsorption of lead(II) ions from aqueous solution onto lignin was investigated in this study. Thus, the influence of the initial solution pH, the lignin dosage, the initial Pb(II) ion concentration and the contact time were investigated at room temperature (19 ± 0.5 °C) in a batch system. Adsorption equilibrium was approached within 30 min. The adsorption kinetic data could be well described by the pseudo-second-order kinetic model, while the equilibrium data were well fitted using the Langmuir isotherm model. A maximum adsorption capacity of 32.36 mg/g was observed. The results of this study indicate that lignin has the potential to become an effective and economical adsorbent for the removal of Pb(II) ions from industrial wastewaters.

scholarly journals Fabrication of magnetic lignin-based adsorbent for removal of methyl orange dye from aqueous solution

BioResources ◽  
2021 ◽  
Vol 16 (3) ◽  
pp. 5436-5449
Author(s):  
Chao Cao ◽  
Lupeng Shao ◽  
Lucian A. Lucia ◽  
Yu Liu
Keyword(s):  
Aqueous Solution ◽  
Methyl Orange ◽  
Influence Factors ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
Adsorption Mechanisms ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Methyl Orange Dye ◽  
Adsorption Desorption

Magnetic lignin-based adsorbent (MLA) was successfully fabricated to remove methyl orange dye from aqueous solution. The synthesized MLA was characterized by means of Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), N2 adsorption-desorption, scanning electron microscopy (SEM), and vibrating sample magnetometer (VSM). In the process of adsorption, influence factors and recycling performance were considered, and the adsorption mechanisms such as isotherm and kinetics were investigated. The result showed that the equilibrium data was consisted with the Langmuir model with a maximum adsorption capacity of 85.0 mg/g. The adsorption kinetics followed a pseudo-second-order model. Based the adsorption performance, MLA showed good recyclability. Therefore, these results demonstrate that MLA could offer a great potential as an efficient and reusable adsorbent in the wastewater treatments.

scholarly journals Adsorption of Cu(II) by Poly-γ-glutamate/Apatite Nanoparticles

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 962
Author(s):  
Kuo-Yu Chen ◽  
Wei-Yu Zeng
Keyword(s):  
Adsorption Capacity ◽  
Kinetic Studies ◽  
Maximum Adsorption Capacity ◽  
Gravimetric Analysis ◽  
Solution Ph ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Initial Adsorption ◽  
Adsorption Equilibrium Data

Poly-γ-glutamate/apatite (PGA-AP) nanoparticles were prepared by chemical coprecipitation method in the presence of various concentrations of poly-γ-glutamate (γ-PGA). Powder X-ray diffraction pattern and energy-dispersive spectroscopy revealed that the main crystal phase of PGA-AP was hydroxyapatite. The immobilization of γ-PGA on PGA-AP was confirmed by Fourier transform infrared spectroscopy and the relative amount of γ-PGA incorporation into PGA-AP was determined by thermal gravimetric analysis. Dynamic light scattering measurements indicated that the particle size of PGA-AP nanoparticles increased remarkably with the decrease of γ-PGA content. The adsorption of aqueous Cu(II) onto the PGA-AP nanoparticles was investigated in batch experiments with varying contact time, solution pH and temperature. Results illustrated that the adsorption of Cu(II) was very rapid during the initial adsorption period. The adsorption capacity of PGA-AP nanoparticles for Cu(II) was increased with the increase in the γ-PGA content, solution pH and temperature. At a pH of 6 and 60 °C, a higher equilibrium adsorption capacity of about 74.80 mg/g was obtained. The kinetic studies indicated that Cu(II) adsorption onto PGA-AP nanoparticles obeyed well the pseudo-second order model. The Langmuir isotherm model was fitted well to the adsorption equilibrium data. The results indicated that the adsorption behavior of PGA-AP nanoparticles for Cu(II) was mainly a monolayer chemical adsorption process. The maximum adsorption capacity of PGA-AP nanoparticles was estimated to be 78.99 mg/g.

Pyridinium-functionalized magnetic mesoporous silica nanoparticles as a reusable adsorbent for phosphate removal from aqueous solution

2016 ◽  
Vol 74 (5) ◽  
pp. 1127-1135 ◽  
Author(s):  
Fang Ma ◽  
Hongtao Du ◽  
Ronghua Li ◽  
Zengqiang Zhang
Keyword(s):  
Aqueous Solution ◽  
Silica Nanoparticles ◽  
Adsorption Capacity ◽  
Mesoporous Silica Nanoparticles ◽  
Phosphate Removal ◽  
Maximum Adsorption Capacity ◽  
Intra Particle Diffusion ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Magnetic Mesoporous Silica

In this work, pyridinium-functionalized silica nanoparticles adsorbent (PC/SiO2/Fe3O4) was synthesized for phosphate removal from aqueous solutions. The removal efficiency of phosphate on the PC/SiO2/Fe3O4 was carried out and investigated under various conditions such as pH, contact temperature and initial concentration. The results showed that the adsorption equilibrium could be reached within 10 min, which fitted a Langmuir isotherm model, with maximum adsorption capacity of 94.16 mg/g, and the kinetic data were fitted well by pseudo-second-order and intra-particle diffusion models. Phosphate loaded on the adsorbents could be easily desorbed with 0.2 mol/L of NaOH, and the adsorbents showed good reusability. The adsorption capacity was still around 50 mg/g after 10 times of reuse. All the results demonstrated that this pyridinium-functionalized mesoporous material could be used for the phosphate removal from aqueous solution and it was easy to collect due to its magnetic properties.

scholarly journals Application of Fe-Impregnated Biochar from Cattle Manure for Removing Pentavalent Antimony from Aqueous Solution

2021 ◽  
Vol 11 (19) ◽  
pp. 9257
Author(s):  
Seong-Jik Park ◽  
Yeon-Jin Lee ◽  
Jin-Kyu Kang ◽  
Je-Chan Lee ◽  
Chang-Gu Lee
Keyword(s):  
Energy Dispersive Spectrometer ◽  
Inhibitory Effect ◽  
Cattle Manure ◽  
Model Fit ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
Pentavalent Antimony ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

This study assessed the applicability of Fe-impregnated biochar derived from cattle manure (Fe-CMB) as an adsorbent for removing Sb(V) from aqueous solutions and investigated the Sb(V) adsorption mechanism. Fe-CMB was mainly composed of C, O, Cl, Fe, Ca, and P, and the adsorption of Sb(V) onto Fe-CMB was identified using an energy dispersive spectrometer and Fourier transform infrared spectroscopy. Sb(V) adsorption reached equilibrium within 6 h, and the Sb(V) adsorption data as a function of time were well described by the pseudo-second-order model. The Langmuir isotherm model fit the equilibrium data better than the Freundlich model. The maximum adsorption capacity of Fe-CMB for Sb(V) obtained from the Langmuir model was 58.3 mg/g. Thermodynamic analysis of Sb(V) adsorption by Fe-CMB indicated that the adsorption process was exothermic and spontaneous. The Sb(V) removal percentage increased with the Fe-CMB dose, which achieved a removal of 98.5% at 10.0 g/L Fe-CMB. Increasing the solution pH from 3 to 11 slightly reduced Sb(V) adsorption by 6.5%. The inhibitory effect of anions on Sb(V) adsorption followed the order: Cl− ≈ NO3− < SO42− < HCO3− < PO43−.

Magnetic nanopowder as effective adsorbent for the removal of Congo Red from aqueous solution

2013 ◽  
Vol 69 (6) ◽  
pp. 1234-1240 ◽  
Author(s):  
O. Paşka ◽  
R. Ianoş ◽  
C. Păcurariu ◽  
A. Brădeanu
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Congo Red ◽  
Polluted Water ◽  
Maximum Adsorption Capacity ◽  
Anionic Dyes ◽  
Solution Ph ◽  
Efficient Combustion ◽  
Equilibrium Data ◽  
Pseudo Second Order

A magnetic iron oxide nanopowder (MnP), prepared by a simple and efficient combustion synthesis technique, was tested for the removal of the anionic dye Congo Red (CR) from aqueous solution. The influence of solution pH, adsorbent dose, temperature, contact time and initial dye concentration on the adsorption of CR onto MnP were investigated. It was shown that the CR adsorption was pH dependent and the adsorption mechanism was governed by electrostatic forces. The adsorption kinetic was best described by the pseudo-second-order model and the equilibrium data were well fitted to the Langmuir isotherm, yielding maximum adsorption capacity of 54.46 mg g−1. The undeniable advantages of the MnP adsorbent such as inexpensive preparation method, good adsorption capacity and easy separation using an external magnetic field, recommend it as a promising candidate for the removal of anionic dyes from polluted water.

scholarly journals Adsorption of Tea Polyphenols using Microporous Starch: A Study of Kinetics, Equilibrium and Thermodynamics

Molecules ◽  
2019 ◽  
Vol 24 (8) ◽  
pp. 1449 ◽  
Author(s):  
Xianchun Hu ◽  
Xianfeng Du
Keyword(s):  
Physical Adsorption ◽  
Tea Polyphenols ◽  
Adsorptive Capacity ◽  
Partial Hydrolysis ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
Long Term Storage ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir

Microporous starch (MPS) granules were formed by the partial hydrolysis of starch using α–amylase and glucoamylase. Due to its biodegradability and safety, MPS was employed to adsorb tea polyphenols (TPS) based on their microporous characteristics. The influences of solution pH, time, initial concentration and temperature on the adsorptive capacity were investigated. The adsorption kinetics data conformed to the pseudo second–order kinetics model, and the equilibrium adsorption data were well described by the Langmuir isotherm model. According to the fitting of the adsorption isotherm formula, the maximum adsorption capacity of TPS onto MPS at pH 6.7 and T = 293 K was approximately 63.1 mg/g. The thermodynamic parameters suggested that the adsorption of TPS onto MPS was spontaneous and exothermic. Fourier transform infrared (FT–IR) analysis and the thermodynamics data were consistent with a physical adsorption mechanism. In addition, MPS-loaded TPS had better stability during long-term storage at ambient temperature.

scholarly journals Efficient Removal of Diclofenac from Aqueous Solution by Potassium Ferrate-Activated Porous Graphitic Biochar: Ambient Condition Influences and Adsorption Mechanism

2019 ◽  
Vol 17 (1) ◽  
pp. 291 ◽  
Author(s):  
Nguyen Thi Minh Tam ◽  
Yunguo Liu ◽  
Hassan Bashir ◽  
Zhihong Yin ◽  
Yuan He ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Diclofenac Sodium ◽  
Maximum Adsorption Capacity ◽  
Potassium Ferrate ◽  
Solution Ph ◽  
Modified Biochar ◽  
Prepared Material ◽  
Endothermic Process ◽  
One Step

Porous graphitic biochar was synthesized by one-step treatment biomass using potassium ferrate (K2FeO4) as activator for both carbonization and graphitization processes. The modified biochar (Fe@BC) was applied for the removal of diclofenac sodium (DCF) in an aqueous solution. The as-prepared material possesses a well-developed micro/mesoporous and graphitic structure, which can strengthen its adsorption capacity towards DCF. The experimental results indicated that the maximum adsorption capacity (qmax) of Fe@BC for DCF obtained from Langmuir isotherm simulation was 123.45 mg·L−1 and it was a remarkable value of DCF adsorption in comparison with that of other biomass-based adsorbents previously reported. Thermodynamic quality and effect of ionic strength studies demonstrated that the adsorption was a endothermic process, and higher environmental temperatures may be more favorable for the uptake of DCF onto Fe@BC surface; however, the presence of NaCl in the solution slightly obstructed DCF adsorption. Adsorption capacity was found to be decreased with the increase of solution pH. Additionally, the possible mechanism of the DCF adsorption process on Fe@BC may involve chemical adsorption with the presence of H-bonding and π–π interaction. With high adsorption capacity and reusability, Fe@BC was found to be a promising absorbent for DCF removal from water as well as for water purification applications.

Fast Removal of Pb2+ from Aqueous Solution by Water Insoluble Konjac Glucomannan

2009 ◽  
Vol 610-613 ◽  
pp. 65-68 ◽  
Author(s):  
Xue Gang Luo ◽  
Feng Liu ◽  
Xiao Yan Lin
Keyword(s):  
Aqueous Solution ◽  
Correlation Coefficients ◽  
Konjac Glucomannan ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Equilibrium Process ◽  
Fast Removal

Konjac glucomannan (KGM) was converted into water insoluble konjac glucomannan (WIKGM) by treating with NaOH through completely deacetylated reaction. Adsorption study was carried out for the adsorption of Pb2+ from aqueous solution using water insoluble konjac glucomannan. The influences of pH, contact time, temperature and initial Pb2+ concentration on the absorbent were studied. Results of kinetic data showed that the Pb2+ adsorption rate was fast and good correlation coefficients were obtained for the pseudo second-order kinetic model. The equilibrium process was described well by the Langmuir isotherm model with maximum adsorption capacity of 9.18 mg/g on WIKGM at 25°C.

Removal of Pb(II) by adsorption onto Chinese walnut shell activated carbon

2015 ◽  
Vol 72 (6) ◽  
pp. 983-989 ◽  
Author(s):  
Zheng-ji Yi ◽  
Jun Yao ◽  
Yun-fei Kuang ◽  
Hui-lun Chen ◽  
Fei Wang ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Walnut Shell ◽  
Maximum Adsorption Capacity ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Chinese Walnut ◽  
Maximum Removal

The excessive discharge of Pb(II) into the environment has increasingly aroused great concern. Adsorption is considered as the most effective method for heavy metal removal. Chinese walnut shell activated carbon (CWSAC) was used as an adsorbent for the removal of Pb(II) from aqueous solution. Batch experiments were conducted by varying contact time, temperature, pH, adsorbent dose and initial Pb(II) concentration. Adsorption equilibrium was established within 150 min. Although temperature effect was insignificant, the Pb(II) adsorption was strongly pH dependent and the maximum removal was observed at pH 5.5. The Pb(II) removal efficiency increased with increasing CWSAC dosage up to 2.0 g/L and reached a maximum of 94.12%. Langmuir and Freundlich adsorption isotherms were employed to fit the adsorption data. The results suggested that the equilibrium data could be well described by the Langmuir isotherm model, with a maximum adsorption capacity of 81.96 mg/g. Adsorption kinetics data were fitted by pseudo-first- and pseudo-second-order models. The result indicated that the pseudo-first-order model best describes the adsorption kinetic data. In summary, CWSAC could be a promising material for the removal of Pb(II) from wastewater.

Sign in / Sign up

Export Citation Format

Share Document