Fast Removal of Pb2+ from Aqueous Solution by Water Insoluble Konjac Glucomannan

2009 ◽  
Vol 610-613 ◽  
pp. 65-68 ◽  
Author(s):  
Xue Gang Luo ◽  
Feng Liu ◽  
Xiao Yan Lin
Keyword(s):  
Aqueous Solution ◽  
Correlation Coefficients ◽  
Konjac Glucomannan ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Equilibrium Process ◽  
Fast Removal

Konjac glucomannan (KGM) was converted into water insoluble konjac glucomannan (WIKGM) by treating with NaOH through completely deacetylated reaction. Adsorption study was carried out for the adsorption of Pb2+ from aqueous solution using water insoluble konjac glucomannan. The influences of pH, contact time, temperature and initial Pb2+ concentration on the absorbent were studied. Results of kinetic data showed that the Pb2+ adsorption rate was fast and good correlation coefficients were obtained for the pseudo second-order kinetic model. The equilibrium process was described well by the Langmuir isotherm model with maximum adsorption capacity of 9.18 mg/g on WIKGM at 25°C.

scholarly journals Adsorption of Lead(II) Ions from Aqueous Solution onto Lignin

2009 ◽  
Vol 27 (4) ◽  
pp. 435-445 ◽  
Author(s):  
Laura Bulgariu ◽  
Dumitru Bulgariu ◽  
Theodor Malutan ◽  
Matei Macoveanu
Keyword(s):  
Aqueous Solution ◽  
Ion Concentration ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Solution Ph ◽  
Batch System ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The adsorption of lead(II) ions from aqueous solution onto lignin was investigated in this study. Thus, the influence of the initial solution pH, the lignin dosage, the initial Pb(II) ion concentration and the contact time were investigated at room temperature (19 ± 0.5 °C) in a batch system. Adsorption equilibrium was approached within 30 min. The adsorption kinetic data could be well described by the pseudo-second-order kinetic model, while the equilibrium data were well fitted using the Langmuir isotherm model. A maximum adsorption capacity of 32.36 mg/g was observed. The results of this study indicate that lignin has the potential to become an effective and economical adsorbent for the removal of Pb(II) ions from industrial wastewaters.

scholarly journals Mechanosynthesis of MFe2O4 (M = Co, Ni, and Zn) Magnetic Nanoparticles for Pb Removal from Aqueous Solution

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
America R. Vazquez-Olmos ◽  
Mohamed Abatal ◽  
Roberto Y. Sato-Berru ◽  
G. K. Pedraza-Basulto ◽  
Valentin Garcia-Vazquez ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Xrd Analysis ◽  
Maximum Adsorption Capacity ◽  
Sorption Behavior ◽  
Order Kinetic ◽  
X Ray ◽  
Isotherm Adsorption ◽  
Crystallite Sizes ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Adsorption of Pb(II) from aqueous solution using MFe2O4 nanoferrites (M = Co, Ni, and Zn) was studied. Nanoferrite samples were prepared via the mechanochemical method and were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), micro-Raman, and vibrating sample magnetometry (VSM). XRD analysis confirms the formation of pure single phases of cubic ferrites with average crystallite sizes of 23.8, 19.4, and 19.2 nm for CoFe2O4, NiFe2O4, and ZnFe2O4, respectively. Only NiFe2O4 and ZnFe2O4 samples show superparamagnetic behavior at room temperature, whereas CoFe2O4 is ferromagnetic. Kinetics and isotherm adsorption studies for adsorption of Pb(II) were carried out. A pseudo-second-order kinetic describes the sorption behavior. The experimental data of the isotherms were well fitted to the Langmuir isotherm model. The maximum adsorption capacity of Pb(II) on the nanoferrites was found to be 20.58, 17.76, and 9.34 mg·g−1 for M = Co, Ni, and Zn, respectively.

scholarly journals Adsorption of tricresyl phosphate onto graphene nanomaterials from aqueous solution

2017 ◽  
Vol 76 (6) ◽  
pp. 1565-1573 ◽  
Author(s):  
Jun Liu ◽  
Siying Xia ◽  
Xiaomeng Lü ◽  
Hongxiang Shen
Keyword(s):  
Experimental Data ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Tricresyl Phosphate ◽  
Batch Mode ◽  
Order Kinetic Model ◽  
Endothermic Process ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Increasing Temperature

Phosphorus flame retardant tricresyl phosphate (TCP) adsorption on graphene nanomaterials from aqueous solutions was explored using batch and column modes. Comparative studies were performed regarding the kinetics and equilibrium of TCP adsorption on graphene oxide (GO) and graphene (G) in batch mode. The adsorption kinetics exhibited a rapid TCP uptake, and experimental data were well described by the pseudo-second-order kinetic model. Adsorption isotherm data of TCP on the two adsorbents displayed an improved TCP removal performance with increasing temperature at pH 5, while experimental data were well described by the Langmuir isotherm model with a maximum adsorption capacity of 87.7 mg·g−1 for G, and 30.7 mg·g−1 for GO) at 303 K. The thermodynamic parameters show that the adsorption reaction is a spontaneous and endothermic process. In addition, dynamic adsorption of TCP in a fixed G column confirmed a faster approach to breakthrough at high flow rate, high influent TCP concentration, and low filling height of adsorbent. Breakthrough data were successfully described by the Thomas and Yoon-Nelson models.

scholarly journals KINETIC AND ISOTHERM STUDY OF CUPPER ADSORPTION FROM AQUEOUS SOLUTION USING WASTE EGGSHELL

2014 ◽  
Vol 22 (2) ◽  
pp. 132-140 ◽  
Author(s):  
Ayben Polat ◽  
Sukru Aslan
Keyword(s):  
Ph Value ◽  
Experimental System ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Isotherm Study ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The sorption of Cu2+ ions from aqueous solutions by eggshell was investigated in a batch experimental system with respect to the temperature, initial Cu2+ concentrations, pH, and biosorbent doses. The adsorption equilibrium was well described by the Langmuir isotherm model with the maximum adsorption capacity of 5.05 mg Cu2+/g eggshell at 25 °C. The value of qe increased with increasing the temperature while also increases the release of Ca2+ and HCO−3 ions from the eggshell. The highest sorption of Cu onto the waste eggshell was determined at the initial pH value of 4.0. The results confirming that the adsorption reaction of Cu2+ on the eggshell was thought to be endothermic. A comparison of the kinetic models such as pseudo first and second-order kinetics, intraparticle diffusion, and Elovich on the sorption rate demonstrated that the system was best described by the pseudo second-order kinetic model.

scholarly journals Synthesis of Large Pore LTL and MOR Zeolites and Use as Adsorbent for The Removal of Heavy Metal and Radioactive Metal Ions in Aqueous Solution

2021 ◽  
Author(s):  
Duy Hoai-Phuong Nguyen ◽  
Quang Thanh Le ◽  
Tung Cao Thanh Pham ◽  
Thanh Tu Le
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Order Kinetic ◽  
Experiment Data ◽  
Large Pore ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Abstract Heavy metal and radioactive ions can cause serious environmental problems if they are not completely removed from wastewater as well as in groundwater. In this study, large pore LTL and MOR zeolites were successfully synthesized and used as adsorbent to remove Pb2+, Cu2+, Zn2+, Cd2+, Cs+ and Sr2+ ions in aqueous solution. At low initial concentration (10 ppm), LTL and MOR zeolites effectively removed above metal ions with removal efficiency in the range of 95–99%. Both zeolites showed high affinity to Cs+ and Pb2+ ions with the adsorption capacity of LTL zeolite to Cs+ and Pb2+ were 278.8 mg/g and 141.4 mg/g, and that of MOR zeolite were 238.8 mg/g and 178.9 mg/g, respectively. The EDS results showed that Pb2+ ions from the aqueous solution were exchanged with exchangeable Na+ ions in MOR zeolite and K+ ions in LTL zeolite. The pseudo-second-order kinetic model and Langmuir isotherm model fitted better to experiment data on the adsorption of metal ions on both LTL and MOR zeolite. This result revealed that the adsorption of these metal ions on LTL and MOR zeolite was monolayer chemisorption. The equilibrium adsorption results showed that the microstructure of zeolite significantly affected the adsorption capacity of LTL and MOR zeolite on removal of tested metal ions.

scholarly journals Adsorption of Co(II) from aqueous solution using municipal sludge biochar modified by HNO3

2021 ◽  
Author(s):  
Chunlian Hu ◽  
Wei Zhang ◽  
Yuantao Chen ◽  
Na Ye ◽  
DaWa YangJi ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Order Kinetic ◽  
Adsorption Effect ◽  
Surface Areas ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Adsorption Of Co

Abstract Herein adsorption studies were proposed on a carboxylated sludge biochar (CSB) material modified by HNO3 to assess its capacity in the removal of cobalt from aqueous solution. The as-prepared sludge biochar material were characterized by Brunaure-Emmett-Teller (BET), Fourier transform infrared (FT-IR), Thermogravimetric analysis (TGA), Energy-dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). The isotherm process could be well described by Langmuir isotherm model. The adsorption kinetics indicated that cobalt adsorption followed pseudo-second-order kinetic model. The mechanism between Co(II) and biochar involved electrostatic interaction, ion exchange, surface complexation and physical function. The adsorption capacity on CSB was as high as 72.27 mg·g−1, surpassing original sludge biochar (SB). This is due to the fact that CSB had abundant oxygen-containing functional groups and many hydroxyls, as well as, the BET surface areas increased when SB was modified by HNO3, which stimulate adsorption effect. Therefore, this work shows that CSB could be used as an efficient adsorbent to remove Co(II) in the wastewater.

scholarly journals Removal of Pb2+ in Wastewater via Adsorption onto an Activated Carbon Produced from Winemaking Waste

Metals ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 697 ◽  
Author(s):  
Francisco Alguacil ◽  
Lorena Alcaraz ◽  
Irene García-Díaz ◽  
Félix López
Keyword(s):  
Activated Carbon ◽  
Polluted Water ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Physico Chemical ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Chemical Factors ◽  
Pseudo Second Order ◽  
Kinetic And Thermodynamic Studies

This work describes the adsorption of Pb2+ in aqueous solution onto an activated carbon (AC) produced from winemaking waste (cluster stalks). After characterizing the AC using Fourier transform infrared spectroscopy (FTIR) and micro-Raman spectroscopy, the influence of different physico-chemical factors (stirring rate, temperature, pH, adsorbent concentration, etc.) on its capacity to adsorb Pb2+ was examined. Kinetic and thermodynamic studies showed that the adsorption of the Pb2+ follows a pseudo-second-order kinetic model and fits the Langmuir isotherm model, respectively. The maximum adsorption capacity of the AC was 58 mg/g at 288 K temperature and pH of 4. In conclusion, ACs made from waste cluster stalks could be successfully used to remove Pb2+ from polluted water.

scholarly journals Novel Ag/Kaolin Nanocomposite as Adsorbent for Removal of Acid Cyanine 5R from Aqueous Solution

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Saeedeh Hashemian ◽  
Mohammad Reza Shahedi
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Adsorption Process ◽  
Alkaline Condition ◽  
Order Kinetic ◽  
Nano Composite ◽  
Order Kinetic Model ◽  
Endothermic Process ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Ag/kaolin nanocomposite was prepared by reduction of Ag+ion with ethanol at alkaline condition on kaolin surface. Nanocomposite was characterized by FTIR, XRD, TEM, and BET methods. Results showed the Ag/kaolin composite has particle size 50 nm. The surface area was increased from kaolin to Ag/kaolin from 1.0215 to 7.409 m2 g−1, respectively. Ag/kaolin nanocomposite was used for adsorption of acid cyanine 5R (AC5R) from aqueous solution. The effect of parameters such as contact time, pH, and mass of nano composite has been investigated. The maximum percentage of adsorption of AC5R was found at pH 3 and contact time of 60 min. The higher percentage removal of AC5R by Ag/kaolin than kaolin can be attributed to catalytic activity of Ag on the surface of kaolin. The experimental data was fitted by pseudo-second-order kinetic model. The adsorption isotherm data could be well interpreted by Langmuir isotherm model. From the results of thermodynamic study, the adsorption process of AC5R onto Ag/kaolin nanocomposite was spontaneous and endothermic process. The process is clean and safe for purifying of water pollution.

scholarly journals Comparative study on As(III) and As(V) adsorption by CO32--intercalated Fe/Mn-LDHs from aqueous solution

2021 ◽  
Author(s):  
Yan Tian ◽  
Guifeng Liu ◽  
Yingying Gao ◽  
Yaru Wang ◽  
Jun Zhang ◽  
...  
Keyword(s):  
Correlation Coefficients ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Metal Mining ◽  
Mining Areas ◽  
The People ◽  
Order Kinetic Model ◽  
Lead Zinc ◽  
Pseudo Second Order ◽  
Double Hydroxide

Abstract Arsenic pollution prevails in rivers and reservoirs in nonferrous metal mining areas, especially in lead–zinc mining areas, which affects the health of the people residing in such areas. Arsenic usually exists as As(III) and As(V) in water, and the adsorption of As(III) and As(V) changes with the type of adsorbent used. In this work, we report a novel adsorbent Fe/Mn–CO3-layered double hydroxide (Fe/Mn–CO3-LDH) composite that can efficiently remove both As(III) and As(V) from water. When the initial concentrations of As(III) and As(V) were 5, 10 and 50 mg/L, the adsorption capacities were 10.12–53.90 and 10.82–48.24 mg/g in the temperature range of 25–45 °C, respectively. The adsorption kinetics conformed well to the pseudo-second-order kinetic model, with all of the fitted correlation coefficients being above 0.998 for all the three initial concentrations (5, 10 and 50 mg/L) tested, suggesting a chemisorption-dominated process. The adsorption isotherms of As(III) and As(V) by Fe/Mn–CO3-LDHs conformed better to the Freundlich model than to the Langmuir one, indicating a heterogeneous reversible adsorption process. The theoretical maximum adsorption capacity increased with the increase in temperature. During adsorption, As(III) was partially converted to As(V), which was further interacted with intralayer anions. While the electrostatic attraction played an important role in the adsorption of As(V).

scholarly journals Adsorptive Removal of Amido Black 10B from Aqueous Solution using Stem Carbon of Ricinus communis as Adsorbent

2019 ◽  
Vol 31 (5) ◽  
pp. 1071-1076
Author(s):  
Rajvir Kaur ◽  
Harpreet Kaur
Keyword(s):  
Aqueous Solution ◽  
Ricinus Communis ◽  
Low Cost ◽  
Correlation Coefficients ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Amido Black 10B ◽  
Amido Black ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

In the present work the efficiency of activated carbon made from stems of Ricinus communis (CRC) has been studied for removal of anionic dye- Amido black 10B from aqueous solution. The adsorbent has been characterized with scanning electron microscopy (SEM) and Fourier transformer infrared (FT-IR). The effects of various experimental parameters such as contact time, adsorbent dose, initial dye concentrations, pH, concentration of salt and temperature have been studied. Langmuir, Freundlich and Tempkin isotherm models have been used for describing the adsorption process. Of these, Langmuir isotherm model has best fitted the experimental data with a maximum adsorption capacity of 7.12 mg/g. Kinetics studies indicate that the adsorption of Amido black 10B has favoured toward pseudo-second-order model with high correlation coefficients. Thermodynamics parameters confirmed that the adsorption has been found to be spontaneous and endothermic in nature. These results suggested that CRC has a potential low-cost adsorbent for the removal of toxic dye Amido black 10B.

Sign in / Sign up

Export Citation Format

Share Document