scholarly journals Purification and Properties of an Esterase from Bacillus licheniformis and it’s Application in Synthesis of Octyl Acetate

2020 ◽  
Vol 14 (1) ◽  
pp. 113-121
Author(s):  
Kamal K. Bhardwaj ◽  
Adarsh Dogra ◽  
Smita Kapoor ◽  
Akshita Mehta ◽  
Reena Gupta
Keyword(s):  
Bacillus Licheniformis ◽  
Column Chromatography ◽  
Biochemical Characterization ◽  
Specific Activity ◽  
Maximum Yield ◽  
Industrial Applications ◽  
Molar Ratio ◽  
Simple Method ◽  
Octyl Acetate ◽  
Short Period

Background: Esterase plays a major role in the degradation of natural materials, industrial pollutants and also provides an immense contribution to the eco-friendly approaches in various industrial applications. Objective: In the present study, extracellular esterase from bacterial isolate Bacillus licheniformis was purified, characterized and used in the synthesis of octyl acetate. Methods: Purification of esterase from Bacillus licheniformis was achieved using Sephadex G-75 column chromatography. Gas chromatography was used to analyze the octyl acetate synthesis. Results: The enzyme was salted out using ammonium sulphate precipitation and 60-70% saturation gave maximum specific activity of the enzyme during precipitation. A purification fold of 6.46 and yield of 9.69% was achieved when esterase from Bacillus licheniformis was purified using Sephadex G-75 column chromatography. Native as well as SDS-PAGE analysis gave a single band of 42 kDa. This showed that the enzyme was purified to homogeneity and it was a monomer with molecular weight of 42 kDa. Biochemical characterization of the enzyme revealed that it had optimum temperature of 45°C in 0.1 M Tris-HCl buffer of pH 8.0. On optimizing different parameters, such as molar ratio of reactants, incubation time, temperature, and amount of protein, the % yield of octyl acetate was found to be 77.3%. Conclusion: In this work, simple method was used to purify esterase and the enzyme was further used in producing esters/products of commercial value within a reasonably short period of 12 h with a maximum yield of 77.3%.

scholarly journals Peroxidase from Coleus Forskohlii: Purification and Biochemical Characterization

2020 ◽  
Vol 5 (1) ◽  
pp. 9-20
Author(s):  
Yaaser Q. Almulaiky ◽  
Yaaser Q. Almulaiky
Keyword(s):  
Ion Exchange ◽  
Peroxidase Activity ◽  
Biochemical Characterization ◽  
Specific Activity ◽  
Gel Filtration ◽  
Catalytic Efficiency ◽  
Industrial Applications ◽  
Coleus Forskohlii ◽  
Sds Page ◽  
Optimum Ph

In this study, a peroxidase from new source was purified using ion exchange and gel filtration techniques. The recovery for peroxidase activity was 19% with 11-fold purification and specific activity of 749 unit/mg protein. Purified peroxidase demonstrated a molecular mass of 39 kDa using gel filtration and was confirmed as a single band on SDS-PAGE. The purified peroxidase revealed a broad optimum pH activity at 6.0-6.5 and 50°C temperature. The kinetic parameters for purified peroxidase toward H2O2 and guaiacol as substrates were found to be Km = 3.355, 5.395 mM, Kcat = 99.52, 79.56 s-1 and Vmax =1.531, 1.242 µmole ml-1 min-1, respectively. The catalytic efficiency (kcat/Km) of the purified peroxidase was 14.75 and 29.66 s−1 mM−1 for guaiacol and H2O2, respectively. Peroxidase activity was observed to be enhanced by Cu2+, Co2+, Ni2+ and inhibited in the presence of Sn2+, Al3+, Hg2+, NaN3, EDTA and urea. Characterization showed that peroxidase purified from C. forskohlii has the ability to be used for food industrial applications.

scholarly journals Isolation, Extraction, Purification, and Molecular Characterization for Thermostable α-Amylase from Locally Isolated Bacillus Species in Sudan

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Maha A. Rakaz ◽  
Mohammed O. Hussien ◽  
Hanan M. Ibrahim
Keyword(s):  
Bacillus Cereus ◽  
Bacillus Licheniformis ◽  
Soil Bacteria ◽  
Biochemical Characterization ◽  
Amylase Activity ◽  
Industrial Applications ◽  
Soil Samples ◽  
Bacillus Species ◽  
Good Source ◽  
Extraction And Purification

The aim of this study was to isolate some soil bacteria strain that produced α-amylase and subsequent extraction and purification. One hundred soil samples were collected from different geographical areas in Khartoum State such as north Omdurman, Toti Island, and Soba. Samples were analyzed for starch hydrolyzing bacteria. Among several bacteria isolated, Bacillus cereus and Bacillus licheniformis were identified as active α-amylase producers. Both bacteria showed a large zone of clearance of 20 mm when grown on starch-agar plates. The identity was conducted using biochemical characterization and confirmed by sequencing their 16S-rDNA. The constitutive nature of amylase was proved by amplification of the amylase gene from the genome of B. licheniformis. The α-amylase activity from the spent medium of B. cereus and B. licheniformis was optimized at pH 8.0 and temperature of 45°C and 65°C, respectively. The α-amylase produced by both bacteria is alkalophilic and thermophilic. The experiments confirmed that B. licheniformis can be a good source of amylase for industrial applications in Sudan.

Recombinant Expression and Biochemical Characterization of Levansucrase from Halophilic Bacteria Bacillus licheniformis BK1 and BK2

2021 ◽  
Vol 874 ◽  
pp. 96-106
Author(s):  
Nur Umriani Permatasari ◽  
Enny Ratnaningsih ◽  
Rukman Hertadi
Keyword(s):  
Bacillus Licheniformis ◽  
Biochemical Characterization ◽  
Specific Activity ◽  
Expression System ◽  
Halophilic Bacteria ◽  
Optimum Conditions ◽  
E Coli ◽  
Optimization Result ◽  
Rsm Optimization

Levansucrase was an extracellular polysacharride (EPS) which has a role in synthesizing levans by transferring fructose moiety from sucrose to acceptor molecules. In the previous study, we have successfully cloned the levansucarese gene from two Bacillus licheniformis strains of BK1 and BK2 labeled as lsbl-bk1 and lsbl-bk2. The present study aims to optimize the expression level of both genes in E. coli expression system and also to obtain the optimum conditions for the recombinant enzymes activity by applying the response surface methodology (RSM). The optimization result found that the highest Lsbl-bk1 production in E. coli expression system was occurred when the recombinant cells grown in the medium containing 0.6% (w/v) NaCl at 42°C, and induced by 0.6 mM IPTG. Different optimum conditions were found for Lsbl-bk2 production. It was achieved when 1.1% (w/v) NaCl added to the production medium and induced by 0.7 mM IPTG at 40°C. RSM optimization result for biochemical characterization of Lsbl-bk1 levansucrase showed the highest specific activity achieved at 56°C and pH 7.5, whereas for the Lsbl-bk2 levansucrase reached the highest specific activity at 50°C and pH 7.5. The addition of Co2+, Ti2+, Mg2+, Ba2+, Zn2+, Fe3+, Ca2+ metal ion to both levansucrases solution did not significantly altered their specific activity, indicating that both levansucrases are not metalo enzymes. Furthermore, the specific activity of levansucrase was also not affected by the addition of 1-25% (w/v) NaCl, suggesting that the variation of ionic strength did not alter the native state of both enzymes. The plot results of levansucrase specific activities toward sucrose concentration showed that both levansucrases follow Michaelis-Menten profile with kcat/KM values ​​about 3.8 and 3.6 s-1/mM respectively. These data indicated that the recombinant levansucrases from halophilic bacteria B. licheniformis BK1 and BK2 are a non metaloenzyme with high affinity and binding rate to sucrose substrate, in which the catalytic efficiency on hydrolysis reactions is relatively low.

A New Method for Plasminogen Standardization

1968 ◽  
Vol 20 (03/04) ◽  
pp. 548-554
Author(s):  
J Gajewski ◽  
G Markus
Keyword(s):  
Proteolytic Activity ◽  
Specific Activity ◽  
Molar Ratio ◽  
Sharp Transition ◽  
Equivalence Point ◽  
Constant Amount ◽  
Residual Level ◽  
Activity Measurements ◽  
Complete Saturation ◽  
Human Plasminogen

SummaryA method for the standardization of human plasminogen is proposed, based on the stoichiometric interaction between plasminogen and streptokinase, resulting in inhibition of proteolytic activity. Activation of a constant amount of plasminogen with increasing amounts of streptokinase yields linearly decreasing activities, as a function of streptokinase, with a sharp transition to a constant residual level. The point of transition corresponds to complete saturation of plasmin with streptokinase in a 1:1 molar ratio, and is therefore a measure of the amount of plasminogen present initially, in terms of streptokinase equivalents. The equivalence point is independent of the kind of protein substrate used, buffer, pH, length of digestion and, within limits, temperature. The method, therefore, is not subject to the variations commonly encountered in the usual determination based on specific activity measurements.

scholarly journals Promising Immobilization of Industrial-Class Phospholipase A1 to Attain High-Yield Phospholipids Hydrolysis and Repeated Use with Optimal Water Content in Water-in-Oil Microemulsion Phase

2021 ◽  
Vol 11 (4) ◽  
pp. 1456
Author(s):  
Yusuke Hayakawa ◽  
Ryoichi Nakayama ◽  
Norikazu Namiki ◽  
Masanao Imai
Keyword(s):  
Water Content ◽  
Reaction Rate ◽  
Enzyme Reaction ◽  
Initial Reaction Rate ◽  
Industrial Applications ◽  
Molar Ratio ◽  
High Yield ◽  
Initial Reaction ◽  
Phospholipase A1 ◽  
Repeated Use

In this study, we maximized the reactivity of phospholipids hydrolysis with immobilized industrial-class phospholipase A1 (PLA1) at the desired water content in the water-in-oil (W/O) microemulsion phase. The optimal hydrophobic-hydrophilic condition of the reaction media in a hydrophobic enzyme reaction is critical to realize the maximum yields of enzyme activity of phospholipase A1. It was attributed to enzymes disliking hydrophobic surroundings as a special molecular structure for reactivity. Immobilization of PLA1 was successfully achieved with the aid of a hydrophobic carrier (Accurel MP100) combination with the treatment using glutaraldehyde. The immobilized yield was over 90% based on simple adsorption. The hydrolysis reaction was kinetically investigated through the effect of glutaraldehyde treatment of carrier and water content in the W/O microemulsion phase. The initial reaction rate increased linearly with an increasing glutaraldehyde concentration and then leveled off over a 6% glutaraldehyde concentration. The initial reaction rate, which was predominantly driven by the water content in the organic phase, changed according to a typical bell-shaped curve with respect to the molar ratio of water to phospholipid. It behaved in a similar way with different glutaraldehyde concentrations. After 10 cycles of repeated use, the reactivity was well sustained at 40% of the initial reaction rate and the creation of the final product. Accumulated yield after 10 times repetition was sufficient for industrial applications. Immobilized PLA1 has demonstrated potential as a biocatalyst for the production of phospholipid biochemicals.

scholarly journals Biochemical characterization of specific Alanine Decarboxylase (AlaDC) and its ancestral enzyme Serine Decarboxylase (SDC) in tea plants (Camellia sinensis)

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Peixian Bai ◽  
Liyuan Wang ◽  
Kang Wei ◽  
Li Ruan ◽  
Liyun Wu ◽  
...  
Keyword(s):  
Gene Duplication ◽  
Camellia Sinensis ◽  
Biochemical Characterization ◽  
Specific Activity ◽  
Protein Sequences ◽  
Biochemical Properties ◽  
High Similarity ◽  
New Gene ◽  
Tea Plants

Abstract Background Alanine decarboxylase (AlaDC), specifically present in tea plants, is crucial for theanine biosynthesis. Serine decarboxylase (SDC), found in many plants, is a protein most closely related to AlaDC. To investigate whether the new gene AlaDC originate from gene SDC and to determine the biochemical properties of the two proteins from Camellia sinensis, the sequences of CsAlaDC and CsSDC were analyzed and the two proteins were over-expressed, purified, and characterized. Results The results showed that exon-intron structures of AlaDC and SDC were quite similar and the protein sequences, encoded by the two genes, shared a high similarity of 85.1%, revealing that new gene AlaDC originated from SDC by gene duplication. CsAlaDC and CsSDC catalyzed the decarboxylation of alanine and serine, respectively. CsAlaDC and CsSDC exhibited the optimal activities at 45 °C (pH 8.0) and 40 °C (pH 7.0), respectively. CsAlaDC was stable under 30 °C (pH 7.0) and CsSDC was stable under 40 °C (pH 6.0–8.0). The activities of the two enzymes were greatly enhanced by the presence of pyridoxal-5′-phosphate. The specific activity of CsSDC (30,488 IU/mg) was 8.8-fold higher than that of CsAlaDC (3467 IU/mg). Conclusions Comparing to CsAlaDC, its ancestral enzyme CsSDC exhibited a higher specific activity and a better thermal and pH stability, indicating that CsSDC acquired the optimized function after a longer evolutionary period. The biochemical properties of CsAlaDC might offer reference for theanine industrial production.

scholarly journals Expression of novel acidic lipase from Micrococcus luteus in Pichia pastoris and its application in transesterification

2021 ◽  
Vol 19 (1) ◽  
Author(s):  
Selfela Restu Adina ◽  
Antonius Suwanto ◽  
Anja Meryandini ◽  
Esti Puspitasari
Keyword(s):  
Fatty Acid ◽  
Pichia Pastoris ◽  
Specific Activity ◽  
Signal Sequence ◽  
Micrococcus Luteus ◽  
Acid Methyl Ester ◽  
Industrial Applications ◽  
Expression Level ◽  
Lipase Gene ◽  
Acidic Lipase

Abstract Background Lipases are promising biocatalysts for industrial applications and attract attention to be explored. A novel acidic lipase has been isolated from the lipolytic bacteria Micrococcus luteus EMP48-D (LipEMP48-D) screened from tempeh. The lipase gene had previously been overexpressed in Escherichia coli BL21, but the expression level obtained was relatively low. Here, to improve the expression level, the lipase gene was cloned to Pichia pastoris. We eliminated the native signal sequence of M. luteus and replaced it with α-mating factor (α-MF) signal sequence. We also optimized and synthesized the lipase gene based on codon preference in P. pastoris. Results LipEMP48-D lipase was expressed as an extracellular protein. Codon optimization has been conducted for 20 codons, with the codon adaption index reaching 0.995. The highest extracellular lipase activity obtained reached 145.4 ± 4.8 U/mg under AOX1 promoter in P. pastoris KM71 strain, which was 9.7-fold higher than the previous activity in E. coli. LipEMP48-D showed the highest specific activity at pH 5.0 and stable within the pH range 3.0–5.0 at 40 °C. LipEMP48-D also has the capability of hydrolyzing various long-chain triglycerides, particularly olive oil (100%) followed by sunflower oil (88.5%). LipEMP48-D exhibited high tolerance for various polar organic solvents with low log P, such as isopropanol (115.7%) and butanol (114.6%). The metal ions (Na+, K+, Ca2+, Mg2+, Mn+) decreased enzyme activity up to 43.1%, while Fe2+ increased relative activity of enzymes up to 200%. The conversion of free fatty acid (FFA) into fatty acid methyl ester (FAME) was low around 2.95%. Conclusions This study was the first to report overexpression of Micrococcus lipase in yeast. The extracellular expression of this acidic lipase could be potential for biocatalyst in industrial fields, especially organic synthesis, food industry, and production of biodiesel.

scholarly journals Purification and characterization of fat body lipase from the greater wax moth, Galleria mellonella (Lepidoptera: Pyralidae)

2019 ◽  
Vol 81 (1) ◽  
Author(s):  
Rahma R. Z. Mahdy ◽  
Shaimaa A. Mo’men ◽  
Marah M. Abd El-Bar ◽  
Emad M. S. Barakat
Keyword(s):  
Metal Ions ◽  
Kinetic Parameters ◽  
Biochemical Characterization ◽  
Galleria Mellonella ◽  
Fat Body ◽  
Specific Activity ◽  
Larval Instar ◽  
Gel Filtration ◽  
Molecular Weights

Abstract Background Insect lipid mobilization and transport are currently under research, especially lipases and lipophorin because of their roles in the production of energy and lipid transport at a flying activity. The present study has been conducted to purify intracellular fat body lipase for the first time, from the last larval instar of Galleria mellonella. Results Purification methods by combination of ammonium sulfate [(NH4)2SO4] precipitation and gel filtration using Sephadex G-100 demonstrated that the amount of protein and the specific activity of fat body lipase were 0.008633 ± 0.000551 mg/ml and 1.5754 ± 0.1042 μmol/min/mg protein, respectively, with a 98.9 fold purity and recovery of 50.81%. Hence, the sephadex G-100 step was more effective in the purification process. SDS-PAGE and zymogram revealed that fat body lipase showed two monomers with molecular weights of 178.8 and 62.6 kDa. Furthermore, biochemical characterization of fat body lipase was carried out through testing its activities against several factors, such as different temperatures, pH ranges, metal ions, and inhibitors ending by determination of their kinetic parameters with the use of p-nitrophenyl butyrate (PNPB) as a substrate. The highest activities of enzyme were determined at the temperature ranges of 35–37 °C and 37–40 °C and pH ranges of 7–9 and 7–10. The partially purified enzyme showed significant stimulation by Ca2+, K+, and Na+ metal ions indicating that fat body lipase is metalloproteinase. Lipase activity was strongly inhibited by some inhibitors; phenylmethylsulfonyl fluoride (PMSF), ethylene-diaminetetractic acid (EDTA), and ethylene glycoltetraacetic acid (EGTA) providing evidence of the presence of serine residue and activation of enzymes by metal ions. Kinetic parameters were 0.316 Umg− 1 Vmax and 301.95 mM Km. Conclusion Considering the purification of fat body lipase from larvae and the usage of some inhibitors especially ion chelating agents, it is suggested to develop a successful control of Galleria mellonella in near future by using lipase inhibitors.

scholarly journals Intermediate filaments in non-neuronal cells of invertebrates: isolation and biochemical characterization of intermediate filaments from the esophageal epithelium of the mollusc Helix pomatia.

1985 ◽  
Vol 101 (2) ◽  
pp. 427-440 ◽  
Author(s):  
E Bartnik ◽  
M Osborn ◽  
K Weber
Keyword(s):  
Positive Reaction ◽  
Intermediate Filaments ◽  
Biochemical Characterization ◽  
Helix Pomatia ◽  
Molar Ratio ◽  
Negative Stain ◽  
Epithelial Morphology ◽  
Lower Chordate

To screen invertebrate tissues for the possible expression of intermediate filaments (IFs), immunofluorescence microscopy with the monoclonal antibody anti-IFA known to detect all mammalian IF proteins was used (Pruss, R. M., R. Mirsky, M. C. Raff, R. Thorpe, A. J. Dowding, and B. H. Anderton. 1981. Cell, 27:419-428). In a limited survey, the lower chordate Branchiostoma as well as the invertebrates Arenicola, Lumbricus, Ascaris, and Helix pomatia revealed a positive reaction primarily on epithelia and on nerves, whereas certain other invertebrates appeared negative. To assess the nature of the positive reaction, Helix pomatia was used since a variety of epithelia was strongly stained by anti-IFA. Fixation-extraction procedures were developed that preserve in electron micrographs of esophagus impressive arrays of IFs as tonofilament bundles. Fractionation procedures performed on single cell preparations document large meshworks of long and curvilinear IF by negative stain. These structures can be purified. One- and two-dimensional gels show three components, all of which are recognized by anti-IFA in immunoblotting: 66 kD/pl 6.35, 53 kD/pl 6.05, and 52 kD/pl 5.95. The molar ratio between the larger and more basic polypeptide and the sum of the two more acidic forms is close to 1. After solubilization in 8.5 M urea, in vitro filament reconstitution is induced when urea is removed by dialysis against 2-50 mM Tris buffer at pH 7.8. The reconstituted filaments contain all three polypeptides. The results establish firmly the existence of invertebrate IFs outside neurones and demonstrate that the esophagus of Helix pomatia displays IFs which in line with the epithelial morphology of the tissue could be related to keratin IF of vertebrates.

Sign in / Sign up

Export Citation Format

Share Document