ADAPTIVE PROCEDURE OF ASSESSING COMPLEXITY OF RESEARCH AND DEVELOPMENT ACTIVITY AT PRODUCTION ENTERPRISE

2019 ◽  
pp. 71-76
Author(s):  
N. A. Aleshkin ◽  
A. P. Aleshkin ◽  
I. R. Karpova

The issue of optimization of the process of determining the cost of scientific and technical projects is considered. The field of research and development (R&D) requires large financial and material costs. The most important indicator in the decision to Finance R&D is its cost. The structure of the price for the work performed, the calculation of their cost, is the basis and an integral part of any contract for their implementation. In order to prevent unreasonable costs of the contractor when performing R&D, it is necessary to control their economic feasibility, as they determine the price of the work performed. The directions of adequate improvement of the methodology for assessing the complexity and cost of R&D in the conditions of atypical and low‑volume relevant scientific, technical and production procedures are formulated. Based on the results of the analysis of the approaches used in the methods, an algorithm and procedure for assessing the complexity of R&D were developed, recommendations for estimating the cost of R&D were formed, and an algorithm and procedure for estimating the cost of R&D of any orientation were created.

As this is one of a series of papers under the general title of ‘Making a success of research in industry’, I should define what success means in my own context. Success can have different meanings to different people, and industrial success cannot be measured by publications, nor by public acclaim. There can be only one criterion of success in my terms, namely that the research should pay for itself and leave a handsome margin over costs; in short that it should be profitable research. This alone is not enough, but it is the prime consideration. The results of the research, when developed into products, should be socially beneficial, and bring to the people and country as a whole desirable consequences, which might be more leisure, improvements in the balance of payments, the ability to pay salaries and wages which at least keep up with the rise in the cost of living, the ability to provide interesting and rewarding employment to scientists and engineers, and the possibility of expanding the British chemical industry in such a way that it can keep up with the giants in the American chemical industry. Du Pont assemble all these criteria neatly in one phrase ‘better things for better living—through chemistry'. I would go along with that phrase—but substitute ‘science ’for ‘chemistry’, since our industry is becoming more and more a scientific rather than just a chemical one. But none of these secondary objectives is attainable without the primary one of making it pay for itself in such a way that no board of directors can doubt that the company’s whole prosperity depends on its research and development activity. So much for definitions.


Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  


Author(s):  
Anastasiya V. Mironova ◽  
Igor’ V. Liskin ◽  
Irina I. Afonina

Neglect of soils leads to their degradation, worsens useful properties, and reduces fertility and productivity. (Research purpose) The research purpose is in conducting a comparative analysis of technologies for treating degraded soils, taking into account the economic feasibility of their restoration in non-black-soil regions of Russia. (Materials and methods) The article shows the main technological scheme of restoration of degraded soils. Authors have identified the main groups of land that are located in non-black-soil regions of Russia. (Results and discussion) The article presents the need for equipment, economic and labor costs for the restoration of each type of land in the non-black-soil regions of Russia. Authors took into account that the salary of machine operators depends on the time of direct execution of the task. It was found that the restoration of virgin and fallow lands was the most preferable from the economic, energy-saving and environmental points of view. The article shows that the restoration of pasture areas exceeds the cost of processing virgin lands, but the number of necessary machine and tractor units is comparable to work on virgin lands. Authors recommend to develop the soils with woody and shrubby vegetation in the first place, starting with land occupied by young plants. It is necessary to take into account the criteria for the fertility of the soil layer. It was found that soils with a small excess of moisture have small cost of its development, while on heavily swampy soils the cost of work on their development is many times higher than the cost of restoring other types of land. (Conclusion) The article shows that the restoration of neglected land is a necessary condition for improving the provision of human needs for food and a number of industrial goods. First of all, it is necessary to develop land that requires minimal investment of economic and labor costs.


2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Jon Kepa Izaguirre ◽  
Leire Barañano ◽  
Sonia Castañón ◽  
José A. L. Santos ◽  
M. Teresa Cesário ◽  
...  

AbstractThe management of municipal solid waste is a major logistic and environmental problem worldwide. Nonetheless, the organic fraction of municipal solid waste (OFMSW) is a valuable source of nutrients which can be used for a variety of purposes, according to the Circular Economy paradigm. Among the possible applications, the bioproduction of a biodegradable polyester, poly(3-hydroxybutyrate) [P(3HB)], using OFMSW as carbon platform is a promising strategy. Here, an economic and environmental assessment of bacterial P(3HB) production from OFMSW is presented based on previously published results. The SuperPro Designer® software was used to simulate P(3HB) production under our experimental parameters. Two scenarios were proposed depending on the fermentation medium: (1) enzymatic hydrolysate of OFMSW supplemented with glucose and plum waste juice; and (2) basal medium supplemented with glucose and plum waste juice. According to our results, both scenarios are not economically feasible under our experimental parameters. In Scenario 1, the low fermentation yield, the cost of the enzymes, the labour cost and the energy consumption are the factors that most contribute to that result. In Scenario 2, the cost of the extraction solvent and the low fermentation yield are the most limiting factors. The possibility of using process waste as raw material for the generation of other products must be investigated to enhance economic feasibility. From an environmental viewpoint, the photochemical oxidation potential (derived from the use of anisole as extraction solvent) and the generation of acid rain and global warming effect (caused by the burning of fuels for power generation) are the most relevant impacts associated to P(3HB) production under our experimental parameters.


2021 ◽  
Vol 104 (2) ◽  
pp. 003685042110196
Author(s):  
Brendon Mpofu ◽  
Hembe E Mukaya ◽  
Diakanua B Nkazi

Carbon dioxide has been identified as one of the greenhouse gases responsible for global warming. Several carbon capture and storage technologies have been developed to mitigate the large quantities of carbon dioxide released into the atmosphere, but these are quite expensive and not easy to implement. Thus, this research analyses the technical and economic feasibility of using calcium leached from cow bone to capture and store carbon dioxide through the mineral carbonation process. The capturing process of carbon dioxide was successful using the proposed technique of leaching calcium from cow shinbone (the tibia) in the presence of HCl by reacting the calcium solution with gaseous carbon dioxide. AAS and XRF analysis were used to determine the concentration of calcium in leached solutions and the composition of calcium in cow bone respectively. The best leaching conditions were found to be 4 mole/L HCl and leaching time of 6 h. Under these conditions, a leaching efficiency of 91% and a calcium conversion of 83% in the carbonation reaction were obtained. Other factors such as carbonation time, agitation rate, and carbonation reaction temperature had little effect on the yield. A preliminary cost analysis showed that the cost to capture 1 ton of CO2 with the proposed technique is about US$ 268.32, which is in the acceptable range of the capturing process. However, the cost of material used and electricity should be reviewed to reduce the preliminary production cost.


2007 ◽  
Vol 56 (5) ◽  
pp. 175-182 ◽  
Author(s):  
R. Hochstrat ◽  
D. Joksimovic ◽  
T. Wintgens ◽  
T. Melin ◽  
D. Savic

The reuse of upgraded wastewater for beneficial uses is increasingly adopted and accepted as a tool in water management. However, funding of schemes is still a critical issue. The focus of this paper is on economic considerations of water reuse planning. A survey of pricing mechanisms for reclaimed water revealed that most schemes are subsidised to a great extent. In order to minimise these state contributions to the implementation and operation of reuse projects, their planning should identify a least cost design option. This also has to take into account the established pricing structure for conventional water resources and the possibility of gaining revenues from reclaimed water pricing. The paper presents a case study which takes into account these aspects. It evaluates different scheme designs with regard to their Net Present Value (NPV). It could be demonstrated that for the same charging level, quite different amounts of reclaimed water can be delivered while still producing an overall positive NPV. Moreover, the economic feasibility and competitiveness of a reuse scheme is highly determined by the cost structure of the conventional water market.


Habarshy ◽  
2021 ◽  
pp. 50-60
Author(s):  
A.B. Myrzhiyeva ◽  
M.Zh Suleimenov ◽  
Uslu Ugur ◽  
A.S. Ibazhanova ◽  
L.O Zhanteliyeva L.O

The scientific article presents the duration of acaricidal effect of «Kenem» drug, and its economic feasibility for protecting cattle against ixodic ticks. As a result of the study, the acaricidal efficacy and the duration of the residual acaricidal effect of drugs are important components in the planning of anti-tick measures. From a practical point of view, the economic feasibility of treating cattle against ixodic ticks in the presented conditions of acaricides in the southern regions is considered important. Despite the fact that the cost of the drug per 100 head exceeds the cost of a similar drug by 1 788.15 tenge, the frequency of its use is less, and additional installations are not required. This is due to the long duration of residual acaricidal effect of Kenem, which is 30 days, which allows to reduce the number of therapeutic measures.When calculating the economic feasibility for the use of acaricides to protect cattle against ixodic ticks, the most convenient way to prevent the sucking of ixodic ticks to animals is the local application of Kenem, which does not require special equipment and special skills of technical staff. Drug duration is 30 days, therefore the cost of its use for the entire season of active ticks per 1 animal is 44% cheaper, compared to veteran, i.e. 1,421.4 tenge.


Author(s):  
Yu. Selikhov ◽  
K. Gorbunov ◽  
V. Stasov

Solar energy is widely used in solar systems, where economy and ecology are combined. Namely, this represents an important moment in the era of depletion of energy resources. The use of solar energy is a promising economical item for all countries of the world, meeting their interests also in terms of energy independence, thanks to which it is confidently gaining a stable position in the global energy sector. The cost of heat obtained through the use of solar installations largely depends on the radiation and climatic conditions of the area where the solar installation is used. The climatic conditions of our country, especially the south, make it possible to use the energy of the Sun to cover a significant part of the need for heat. A decrease in the reserves of fossil fuel and its rise in price have led to the development of optimal technical solutions, efficiency and economic feasibility of using solar installations. And today this is no longer an idle curiosity, but a conscious desire of homeowners to save not only their financial budget, but also health, which is possible only with the use of alternative energy sources, such as: double-circuit solar installations, geothermal heat pumps (HP), wind power generators. The problem is especially acute in the heat supply of housing and communal services (HCS), where the cost of fuel for heat production is several times higher than the cost of electricity. The main disadvantages of centralized heat supply sources are low energy, economic and environmental efficiency. And high transport tariffs for the delivery of energy carriers and frequent accidents on heating mains exacerbate the negative factors inherent in traditional district heating. One of the most effective energy-saving methods that make it possible to save fossil fuel, reduce environmental pollution, and meet the needs of consumers in process heat is the use of heat pump technologies for heat production.


Author(s):  
Kamil M. Kraj

As discussed in the literaturę, more and more transnational corporations (TNCs) were attaching importance to research and development (R&D) activity from the 1970s through the 2000s. This growing involvement of TNCs in R&D resulted in their dominant role in global R&D expenditure. Indeed, a comparative analysis of financial data collected for the group of the 102 largest corporate R&D spenders worldwide in 2007 showed that this group of TNCs accounted for a significant share of the worlds R&D expenditure not only in 2007 alone but also in the period of 2000-2011. Moreover, a similarity between their home countries and the countries being top R&D spenders was found; however, most of these corporations were conducting their R&D at international level. Furthermore, the analysed TNCs operated mostly in technology-intensive industries, for which the foun- dations were provided by a multidisciplinary science and technology basis.


Sign in / Sign up

Export Citation Format

Share Document