scholarly journals Гетероструктура квантово-каскадного детектора частотного диапазона 2.5 ТГц

2022 ◽  
Vol 56 (3) ◽  
pp. 357
Author(s):  
А.В. Бабичев ◽  
Е.С. Колодезный ◽  
А.Г. Гладышев ◽  
Д.В. Денисов ◽  
A. Jollivet ◽  
...  
Keyword(s):  
Molecular Beam ◽  
Iterative Solution ◽  
Dark Field ◽  
Total Thickness ◽  
X Ray Diffraction ◽  
Structural Perfection ◽  
X Ray ◽  
Quantum Cascade ◽  
Transmission Electron ◽  
High Structural Perfection

The design of the heterostructure of a 2.5 THz range quantum-cascade detector is proposed and heterostructure is grown by molecular-beam epitaxy technique. To optimize the thicknesses of the layers of the heterostructure cascades, a numerical method for iterative solution of the Schrodinger ¨ −Poisson equation in the k · p formalism was used. The grown heterostructure of the quantum-cascade detector showed a high structural perfection, confirmed by the small values of the average FWHM of the high-order satellite peaks on the X-ray diffraction rocking curves, which were (8.3 ± 0.5)′′. Analysis of dark-field images obtained by transmission electron microscopy showed that the total thickness of the layers in the cascade is (137.3 ± 6.9) nm, which corresponds to the calculated thickness of the layers in the cascade of the heterostructure of the quantum-cascade detector.

Optical and structural prorerties of InAs epilayer on graded InGaAs

2001 ◽  
Vol 696 ◽  
Author(s):  
Gu Hyun Kim ◽  
Jung Bum Choi ◽  
Joo In Lee ◽  
Se-Kyung Kang ◽  
Seung Il Ban ◽  
...  
Keyword(s):  
Molecular Beam Epitaxy ◽  
Residual Strain ◽  
Molecular Beam ◽  
Lattice Mismatch ◽  
Peak Position ◽  
Excitation Intensity ◽  
Total Thickness ◽  
Ingaas Layer ◽  
X Ray Diffraction ◽  
X Ray

AbstractWe have studied infrared photoluminescence (PL) and x-ray diffraction (XRD) of 400 nm and 1500 nm thick InAs epilayers on GaAs, and 4 nm thick InAs on graded InGaAs layer with total thickness of 300 nm grown by molecular beam epitaxy. The PL peak positions of 400 nm, 1500 nm and 4 nm InAs epilayer measured at 10 K are blue-shifted from that of InAs bulk by 6.5, 4.5, and 6 meV, respectively, which can be largely explained by the residual strain in the epilayer. The residual strain caused by the lattice mismatch between InAs and GaAs or graded InGaAs/GaAs was observed from XRD measurements. While the PL peak position of 400 nm thick InAs layer is linearly shifted toward higher energy with increase in excitation intensity ranging from 10 to 140 mW, those of 4 nm InAs epilayer on InGaAs and 1500 nm InAs layer on GaAs is gradually blue-shifted and then, saturated above a power of 75 mW. These results suggest that adopting a graded InGaAs layer between InAs and GaAs can efficiently reduce the strain due to lattice mismatch in the structure of InAs/GaAs.

Sb-rich nanoinclusions in an AlGaAsSb metamaterial

MRS Advances ◽  
2019 ◽  
Vol 4 (5-6) ◽  
pp. 277-284
Author(s):  
Nikolay A. Bert ◽  
Vladimir V. Chaldyshev ◽  
Nikolay A. Cherkashin ◽  
Vladimir N. Nevedomskiy ◽  
Valery V. Preobrazhenskii ◽  
...  
Keyword(s):  
Molecular Beam ◽  
Filling Factor ◽  
Local Thermodynamic Equilibrium ◽  
Average Diameter ◽  
Formation Temperature ◽  
X Ray Diffraction ◽  
X Ray ◽  
Self Organized ◽  
Transmission Electron ◽  
The Matrix

ABSTRACTWe studied the microstructure of Al0.28Ga0.72As0.972Sb0.028 metamaterials containing a developed array of AsSb nanoinclusions. The AlGaAsSb films were grown by low-temperature molecular-beam epitaxy followed by high-temperature annealing at 750°C. The process resulted in an array of self-organized AsSb nanonclusions with an average diameter of 15 nm. The volume filling factor was about 0.003. Using transmission electron microscopy and x-ray diffraction we showed that the nanoinclusions have A7-type rhombohedral atomic structure with the following orientation in the matrix (0003)p || {111}m and [-2110]p || 〈220〉m, where p and m indices indicate the AsSb precipitate and AlGaAsSb matrix, correspondingly. The nanoinclusions appeared to be strongly enriched by antimony (more than 90 atomic %), whereas the Sb content in the AlGaAsSb matrix was 2.8 atomic %. The strong enrichment of the inclusion with Sb resulted from the local thermodynamic equilibrium between the solid AlGaAsSb matrix and AsSb inclusions which became liquid at a formation temperature of 750°C.

Structural Perfection of in GaAs/InP Superlattices Grown by Gas Source Molecular Beam Epitaxy: A High-Resolution X-Ray Diffraction Study

1987 ◽  
Vol 103 ◽  
Author(s):  
J. M. Vandenberg ◽  
M. B. Panish ◽  
R. A. Hamm
Keyword(s):  
High Resolution ◽  
Molecular Beam Epitaxy ◽  
Molecular Beam ◽  
Structural Parameters ◽  
Molecular Layer ◽  
X Ray Diffraction ◽  
Structural Perfection ◽  
X Ray ◽  
Gas Source ◽  
Step Model

ABSTRACTHigh-resolution X-ray diffraction (HRXRD) studies have been cardied out to determine the structural perfection and periodicity for a number of high-quality InGaAsfInP superlattices grown by gas source molecular beam epitaxy. X-ray scans were carried out with a compact four-crystal monochromator resulting in a resolution of one molecular layer (∼3,Å), which enables one to observe very small variations in the periodic structure. Sharp and strong higher-order satellite reflections in the XRD profiles were observed indicating smooth interfaces with well-defined modulated structures. Excellent computer simulated fits of the X-ray satellite pattern could be generated based on a kinematical XRD step model which assumes ideally sharp interfaces, and periodic structural parameters such as the strain in the well could be extracted. Our results3 demonstrate that HRXRD in conjunction with the kinematical step model is a very sensitive method to assess periodic structural modifications in superlattices as a result of the precise growth conditions in the gas source MBE system.

Spontaneous Lateral Modulations in InAlAs Buffer Layers Grown by MBE on InP Substrates

1995 ◽  
Vol 417 ◽  
Author(s):  
F. Peiró ◽  
A. Cornet ◽  
J. C. Ferrer ◽  
J. R. Morante ◽  
G. Halkias ◽  
...  
Keyword(s):  
Quantum Wells ◽  
Molecular Beam ◽  
Buffer Layers ◽  
Single Quantum ◽  
X Ray Diffraction ◽  
Single Quantum Well ◽  
Quantum Well Structures ◽  
X Ray ◽  
Transmission Electron ◽  
Inp Substrates

AbstractTransmission Electron Microscopy (TEM) and X-ray Diffraction (XRD) have been used to analyze the spontaneous appearance of lateral composition modulations in InyAl1−yAs (yIn.≅ 50%) buffer layers of single quantum well structures grown by molecular beam epitaxy on exact and vicinal (100) InP substrates, at growth temperatures in the range of 530°C–580°C. The influence of the growth temperature, substrate misorientation and epilayer mismatch on the InAlAs lateral modulation is discussed. The development of a self-induced quantum-wire like morphology in the In0.53Ga0.47As single quantum wells grown over the modulated buffers is also commented on.

Structural properties of molecular beam epitaxy grown Ni/Pt superlattices

1997 ◽  
Vol 12 (1) ◽  
pp. 161-174 ◽  
Author(s):  
W. Staiger ◽  
A. Michel ◽  
V. Pierron-Bohnes ◽  
N. Hermann ◽  
M. C. Cadeville
Keyword(s):  
Molecular Beam ◽  
Growth Direction ◽  
Misfit Dislocations ◽  
X Ray Diffraction ◽  
Plan View ◽  
X Ray ◽  
Transmission Electron ◽  
Superlattice Peak ◽  
Diffraction Peaks ◽  
Diffraction Patterns

We find that the [Ni3.2nmPt1.6nm] × 15 and [Ni3.2nmPt0.8nm] × 15 multilayers are semicoherent and display a columnar morphology. From both the period of the moir’e fringes and the positions of the diffraction peaks in electronic (plan-view and crosssection geometries) and x-ray diffraction patterns, one deduces that the nickel is relaxed (at least in the error bars of all our measurements), whereas the platinum remains slightly strained (≈−1%). The interfaces are sharp; no intermixing takes place giving rise to neat contrasts in transmission electron microscopy (TEM) and to high intensities of the superlattice peaks in the growth direction in both diffraction techniques. The relaxation of the interfacial misfit occurs partially through misfit dislocations, partially through the strain of platinum. A quasiperiodic twinning occurs at the interfaces, the stacking fault which forms the twin being the most often located at the interface Pt/Ni, i.e., when a Pt layer begins to grow on the Ni layer. The simulation of the θ/2θ superlattice peak intensities takes into account the columnar microstructure. It shows that the roughness is predominantly at medium scale with a fluctuation of about 12.5% for Ni layers and negligible for Pt layers.

Double Periodicity Formation in EuTe/PbTe Superlattices

1995 ◽  
Vol 399 ◽  
Author(s):  
M. Shima ◽  
L. Salamanca-Riba ◽  
G. Springholz ◽  
G. Bauer
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Molecular Beam Epitaxy ◽  
Molecular Beam ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Short Period ◽  
Short Period Superlattices

ABSTRACTMolecular beam epitaxy was used to grow EuTe(x)/PbTe(y) short period superlattices with x=1-4 EuTe(111) monolayers alternating with y≈3x PbTe monolayers. The superlattices were characterized by transmission electron microscopy and high resolution x-ray diffraction. Regions with double periodicity were observed coexisting with areas of nominal periodicity. The sample with x=3.5 and y=9, for example, contains regions with double periodicity of x=7 and y=17. X-ray diffraction measurements confirm the formation of the double periodicity in these samples by the appearance of weak satellites in between the satellites of the nominal periodicity. The double periodicity in the superlattice is believed to result from interdiffusion during the growth. A model for this process is presented.

scholarly journals Dynamical X-ray diffraction imaging of voids in dislocation-free high-purity germanium single crystals

2020 ◽  
Vol 53 (4) ◽  
pp. 880-884 ◽  
Author(s):  
Kevin-P. Gradwohl ◽  
Andreas N. Danilewsky ◽  
Melissa Roder ◽  
Martin Schmidbauer ◽  
József Janicskó-Csáthy ◽  
...  
Keyword(s):  
Single Crystals ◽  
High Purity ◽  
Direct Evidence ◽  
X Ray Diffraction ◽  
Structural Perfection ◽  
X Ray ◽  
High Purity Germanium ◽  
High Structural Perfection ◽  
Diffraction Imaging ◽  
General Method

White-beam X-ray topography has been performed to provide direct evidence of micro-voids in dislocation-free high-purity germanium single crystals. The voids are visible because of a dynamical diffraction contrast. It is shown that voids occur only in dislocation-free parts of the crystal and do not show up in regions with homogeneous and moderate dislocation density. It is further suggested that the voids originate from clustering of vacancies during the growth process. A general method is proposed to verify the presence of voids for any crystalline material of high structural perfection.

scholarly journals Structural Property Study for GeSn Thin Films

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3645
Author(s):  
Liyao Zhang ◽  
Yuxin Song ◽  
Nils von den Driesch ◽  
Zhenpu Zhang ◽  
Dan Buca ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Molecular Beam ◽  
Chemical Vapor ◽  
Threading Dislocations ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
X Ray ◽  
Transmission Electron

The structural properties of GeSn thin films with different Sn concentrations and thicknesses grown on Ge (001) by molecular beam epitaxy (MBE) and on Ge-buffered Si (001) wafers by chemical vapor deposition (CVD) were analyzed through high resolution X-ray diffraction and cross-sectional transmission electron microscopy. Two-dimensional reciprocal space maps around the asymmetric (224) reflection were collected by X-ray diffraction for both the whole structures and the GeSn epilayers. The broadenings of the features of the GeSn epilayers with different relaxations in the ω direction, along the ω-2θ direction and parallel to the surface were investigated. The dislocations were identified by transmission electron microscopy. Threading dislocations were found in MBE grown GeSn layers, but not in the CVD grown ones. The point defects and dislocations were two possible reasons for the poor optical properties in the GeSn alloys grown by MBE.

Optical And Structural properties of Vertical Aligned Self-Assembled InAs Quantum Dots Multilayers

2001 ◽  
Vol 676 ◽  
Author(s):  
J. C. González ◽  
M. I. N. da Silva ◽  
W. N. Rodrigues ◽  
F. M. Matinaga ◽  
R. Magalhaes-Paniago ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Structural Properties ◽  
Molecular Beam ◽  
X Ray Diffraction ◽  
Inas Quantum Dots ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Self Assembled

ABSTRACTIn this work, we report optical and structural properties of vertical aligned self-assembled InAs quantum dots multilayers. The InAs quantum dots samples were grown by Molecular Beam Epitaxy. Employing Atomic Force Microscopy, Transmission Electron Microscopy, and Gracing Incident X-ray Diffraction we have studied the structural properties of samples with different number of periods of the multiplayer structure, as well as different InAs coverage. The optical properties were studied using Photoluminescence spectroscopy.

Sign in / Sign up

Export Citation Format

Share Document