scholarly journals A REVIEW ON VARIOUS FORMULATION OF NANOEMULSIONS IN COSMETICS WITH PLANT EXTRACTS AS THE ACTIVE INGREDIENTS

2021 ◽  
pp. 34-40
Author(s):  
KARINA O. WISEVA ◽  
FRIDA WIDYASTUTI ◽  
HISA FAADHILAH ◽  
NASRUL WATHONI
Keyword(s):  
High Pressure ◽  
Plant Extracts ◽  
Phase Inversion ◽  
Centella Asiatica ◽  
High Energy ◽  
Rubus Idaeus ◽  
Low Energy ◽  
Current Status ◽  
Active Ingredients ◽  
Garcinia Mangostana

This review conducted to compare the difference of the formulation of nanoemulsion cosmetics by plant extracts between Centella asiatica, seed oil from Rubus idaeus, Phyllanthus urinaria, Garcinia mangostana L., Vellozia sauamata, and Cordyceps militaris extract. Materials and methods was taken from several literature in valid databases that focuses on current status of the formulation of nanoemulsion and its characteristics, nanoemulsion cosmetics, and formulation of nanoemulsion cosmetics that are made by plant extract as the active ingredient. Comparison of the formulas above can be seen from various aspects. Referring to each article, 4 out of 6 formulas use high energy techniques and the rest use low energy techniques. Formula 1, 3, 6 use high energy technique with high pressure homogenization, and formula 4 uses ultrasonication, which is still a high energy technique. Formulas 2 and 5 use low energy techniques, namely formula 2 using Phase Inversion Composition (PIC) and formula 5 using Phase Inversion Temperature (PIT). High-Pressure Homogenizer (HPH) is the most widely used for the manufacture of nanoemulsions. In terms of formula, the use of components such as surfactant, cosurfactant, oil phase, and water phase is also different from the 6 formulas presented. Even though all of the six formulas are different, the active ingredients in the form of nanoemulsions need to be tested until finally the goal of the cosmetic product is achieved.

Fabrication of the narrow size nano curcuminoids emulsion by combining phase inversion temperature and ultrasonication: preparation and bioactivity

2021 ◽  
Author(s):  
Quang Hieu Tran ◽  
Thuy Thanh Ho ◽  
Tu Thanh Nguyen
Keyword(s):  
Energy Method ◽  
Phase Inversion ◽  
Curcuma Longa ◽  
High Energy ◽  
Low Energy ◽  
Inversion Temperature ◽  
Comprehensive Study ◽  
Phase Inversion Temperature

A comprehensive study from Curcuma longa to powder nano curcuminoids has been carried out. Combining of both low energy method (Phase Inversion Temperature) and high-energy method (Ultrasonication), a series of...

SUPER SEPARATOR SPECTROMETER FOR THE LINAG HEAVY ION BEAMS

2009 ◽  
Vol 18 (10) ◽  
pp. 2160-2168 ◽  
Author(s):  
A. DROUART ◽  
J. A. NOLEN ◽  
H. SAVAJOLS
Keyword(s):  
Electron Spectroscopy ◽  
Heavy Ion ◽  
High Energy ◽  
Ion Beams ◽  
Low Energy ◽  
Current Status ◽  
Secondary Reactions ◽  
Two Stages ◽  
Rotating Target ◽  
Very High

The Super Separator Spectrometer (S3) will receive the very high intensity heavy ion beams from the LINAG accelerator of SPIRAL2. Its privileged fields of physics are the delayed study of rare nuclei and secondary reactions with exotic nuclei. The project is presently in a phase of conceptual design. It includes a rotating target to sustain the high energy deposit, a two stages separator (momentum achromat) and spectrometer (mass spectrometer). Various detection set-ups are foreseen, especially a delayed α, γ, and electron spectroscopy array and a gas catcher coupled to a low energy branch. We present here the current status of the project and its main features.

scholarly journals Nanoemulsions containing Garcinia mangostana L. pericarp extract for topical applications: Development, characterization, and in vitro percutaneous penetration assay

PLoS ONE ◽  
2021 ◽  
Vol 16 (12) ◽  
pp. e0261792
Author(s):  
Elsa Anisa Krisanti ◽  
Dyah Paramawidya Kirana ◽  
Kamarza Mulia
Keyword(s):  
Xanthan Gum ◽  
Droplet Diameter ◽  
Coconut Oil ◽  
High Energy ◽  
Low Energy ◽  
Percutaneous Penetration ◽  
Virgin Coconut Oil ◽  
Garcinia Mangostana ◽  
Topical Applications

A highly stable oil-in-water nanoemulsion for topical applications, containing mangostins extracted from the pericarp of mangosteen (Garcinia mangostana L.), is a promising strategy to protect mangostins as well as to improve penetration of these important antioxidants through the skins. Nanoemulsions consisted of virgin coconut oil as the oil phase, Tween-80 and Span-80 as surfactants, and xanthan gum as the thickening agent, were prepared using the high-energy and low-energy emulsification methods. The nanoemulsions that were stable up to 28 days had oil droplet diameter of 220 nm to 353 nm and zeta potential of -46.9 mV to -63.7 mV. The accelerated stability test showed that the most stable nanoemulsions were those prepared using the low-energy emulsification method with an estimated shelf life of eleven months, composed of 11% oil phase, 17% surfactant, and 72% aqueous phase. The in vitro percutaneous penetration test for the nanoemulsion with added xanthan gum provided high cumulative skin penetration of mangostins of up to 114 μg/cm2. The results of this study indicate that virgin coconut oil-based nanoemulsions containing mangostins, prepared using the low-energy emulsification method, stabilized by xanthan gum and mixed at 40°C can prospectively be used for topical applications.

scholarly journals Nanoemulsions: Factory for Food, Pharmaceutical and Cosmetics

Processes ◽  
2019 ◽  
Vol 7 (9) ◽  
pp. 617 ◽  
Author(s):  
Nor Azrini Nadiha Azmi ◽  
Amal A. M. Elgharbawy ◽  
Shiva Rezaei Motlagh ◽  
Nurhusna Samsudin ◽  
Hamzah Mohd. Salleh
Keyword(s):  
Phase Inversion ◽  
High Surface ◽  
High Surface Area ◽  
High Energy ◽  
Review Article ◽  
Low Energy ◽  
Energy Methods ◽  
High Pressure Homogenization ◽  
Spontaneous Emulsification ◽  
Advantages And Disadvantages

Nanotechnology, particularly nanoemulsions (NEs), have gained increasing interest from researchers throughout the years. The small-sized droplet with a high surface area makes NEs important in many industries. In this review article, the components, properties, formation, and applications are summarized. The advantages and disadvantages are also described in this article. The formation of the nanosized emulsion can be divided into two types: high and low energy methods. In high energy methods, high-pressure homogenization, microfluidization, and ultrasonic emulsification are described thoroughly. Spontaneous emulsification, phase inversion temperature (PIT), phase inversion composition (PIC), and the less known D-phase emulsification (DPE) methods are emphasized in low energy methods. The applications of NEs are described in three main areas which are food, cosmetics, and drug delivery.

Low energy vs. high energy depositional settings and related sedimentary bodies in early Senenian rudist bearing carbonate shelves (central-southern Italy)

2001 ◽  
Vol 28 (1) ◽  
pp. 37-40 ◽  
Author(s):  
Gabriele Carannante ◽  
A. Laviano ◽  
D. Ruberti ◽  
Lucia Simone ◽  
G. Sirna ◽  
...  
Keyword(s):  
Southern Italy ◽  
High Energy ◽  
Low Energy ◽  
Depositional Settings

Transportation: Fuel Energies

2017 ◽  
Author(s):  
Peter Rez
Keyword(s):  
Energy Density ◽  
Fossil Fuels ◽  
High Energy ◽  
Ease Of Use ◽  
Low Energy ◽  
High Energy Density ◽  
Nuclear Fuels ◽  
Liquid Hydrocarbons ◽  
Transportation Fuel ◽  
Journey Time

Transportation efficiency can be measured in terms of the energy needed to move a person or a tonne of freight over a given distance. For passengers, journey time is important, so an equally useful measure is the product of the energy used and the time taken for the journey. Transportation requires storage of energy. Rechargeable systems such as batteries have very low energy densities as compared to fossil fuels. The highest energy densities come from nuclear fuels, although, because of shielding requirements, these are not practical for most forms of transportation. Liquid hydrocarbons represent a nice compromise between high energy density and ease of use.

scholarly journals Low-Energy Electron Damage to Condensed-Phase DNA and Its Constituents

2021 ◽  
Vol 22 (15) ◽  
pp. 7879
Author(s):  
Yingxia Gao ◽  
Yi Zheng ◽  
Léon Sanche
Keyword(s):  
Condensed Phase ◽  
Genetic Material ◽  
High Energy ◽  
Dna Lesions ◽  
Low Energy ◽  
Experimental Investigations ◽  
Experimental Conditions ◽  
Strand Breaks ◽  
Sequence Of Events ◽  
Wide Range

The complex physical and chemical reactions between the large number of low-energy (0–30 eV) electrons (LEEs) released by high energy radiation interacting with genetic material can lead to the formation of various DNA lesions such as crosslinks, single strand breaks, base modifications, and cleavage, as well as double strand breaks and other cluster damages. When crosslinks and cluster damages cannot be repaired by the cell, they can cause genetic loss of information, mutations, apoptosis, and promote genomic instability. Through the efforts of many research groups in the past two decades, the study of the interaction between LEEs and DNA under different experimental conditions has unveiled some of the main mechanisms responsible for these damages. In the present review, we focus on experimental investigations in the condensed phase that range from fundamental DNA constituents to oligonucleotides, synthetic duplex DNA, and bacterial (i.e., plasmid) DNA. These targets were irradiated either with LEEs from a monoenergetic-electron or photoelectron source, as sub-monolayer, monolayer, or multilayer films and within clusters or water solutions. Each type of experiment is briefly described, and the observed DNA damages are reported, along with the proposed mechanisms. Defining the role of LEEs within the sequence of events leading to radiobiological lesions contributes to our understanding of the action of radiation on living organisms, over a wide range of initial radiation energies. Applications of the interaction of LEEs with DNA to radiotherapy are briefly summarized.

Sign in / Sign up

Export Citation Format

Share Document