scholarly journals Experimental investigations of CO2 seepage behaviorin naturally fractured coal under hydro-thermal-mechanical conditions

2021 ◽  
Vol 25 (6 Part B) ◽  
pp. 4651-4658
Author(s):  
Teng Teng ◽  
Xiaoyan Zhu ◽  
Yu-Ming Wang ◽  
Chao-Yang Ren
Keyword(s):  
Gas Flow ◽  
Confining Pressure ◽  
Gas Pressure ◽  
Experimental Investigations ◽  
Permeability Evolution ◽  
Coal Permeability ◽  
Naturally Fractured ◽  
Series Of Experiments ◽  
Fractured Coal ◽  
Increasing Temperature

Gas-flow in coal or rock is hypersensitive to the changes of temperature, confin?ing pressure and gas pressure. This paper implemented a series of experiments to observe the seepage behavior, especially the permeability evolution of CO2 in naturally fractured coal sample under coupled hydro-thermal-mechanical conditions. The experimental results show that coal permeability increases exponentially with the increasing gas pressure, and tends to be linear when the confining pressure is high. Coal permeability decreases exponentially with the increasing confining pressure. Coal permeability decreases with the increasing temperature generally, but it may bounce up when the temperature rises to high. The results provide reference for the projects of coal gas extraction and carbon dioxide geological sequestration.

scholarly journals Model development and analysis of coal permeability based on the equivalent characteristics of dual-porosity structure

2019 ◽  
Vol 17 (2) ◽  
pp. 313-327
Author(s):  
Haijun Guo ◽  
Kai Wang ◽  
Yuanping Cheng ◽  
Liang Yuan ◽  
Chao Xu
Keyword(s):  
Coalbed Methane ◽  
Model Development ◽  
Gas Pressure ◽  
Dual Porosity ◽  
Permeability Evolution ◽  
Evolution Law ◽  
Fracture Width ◽  
Coal Permeability ◽  
Porosity Structure ◽  
Gas Seepage

Abstract Mining is a dynamic fracture process of coal and/or rock. The structural failure of coal bodies will change the coal matrix-fracture characteristics and then affect the distribution characteristics of the coalbed methane (CBM). Because of the structural complexity of coal, the coal matrices and fractures will be assumed to the geometries with rule shapes when the gas seepage characteristics in coals are analyzed. The size of the simplified geometries is the equivalent scale of dual-porosity coal structures (i.e. the equivalent fracture width and equivalent matrix scale). In this paper, according to the reasonable assumptions with regarding to dual-porosity coal structures, a new coal permeability evolution model based on the equivalent characteristics of dual-porosity structure (ECDP model) was built and the effect of the equivalent characteristics of dual-porosity structure on the coal permeability evolution law was analyzed. It is observed that if the initial fracture porosity is constant and the equivalent matrix scale increases, the range in which the permeability of coal rises with rising gas pressure increases; if the equivalent fracture width decreases and the equivalent matrix scale is constant, the range in which the permeability of coal rises with rising gas pressure decreases. The ECDP model is more suitable for revealing the evolution law of the coal permeability when large deformations occur in the coal bodies and/or the coal structure is damaged irreversibly, especially during enhancing CBM recovery.

Effects of gas pressure and confining pressure on gas flow behavior in saturated cohesive soils with low permeability

2019 ◽  
Vol 260 ◽  
pp. 105241 ◽  
Author(s):  
Long Xu ◽  
Fanghua Zhu ◽  
Fusheng Zha ◽  
Chengfu Chu ◽  
Chengbin Yang
Keyword(s):  
Gas Flow ◽  
Flow Behavior ◽  
Confining Pressure ◽  
Gas Pressure ◽  
Low Permeability ◽  
Cohesive Soils

Experimental Study on Microscopic Structure and Permeability of Tectonic Soft Coal

2013 ◽  
Vol 734-737 ◽  
pp. 241-245
Author(s):  
Kui Gao ◽  
Wei Yi Xue
Keyword(s):  
Gas Permeability ◽  
Great Influence ◽  
Confining Pressure ◽  
Gas Pressure ◽  
Microscopic Structure ◽  
Klinkenberg Effect ◽  
Coal Permeability ◽  
Typical Sample ◽  
Soft Coal ◽  
Soft Coal Seam

To analyze the mining effect to gas permeability of tectonic soft coal seam, we choose typical sample from tectonic soft coal, study the gas permeability and microstructure. The results suggest that tectonic soft coal has been badly destroyed, and its micro fracture pore develops. Confining pressure has a great influence on the permeability of tectonic soft coal. When gas pressure remains constant, with the increase of confining pressure of tectonic soft coal permeability began to decrease very fast. But when decreasing to a certain degree, it changes slowly; when confining pressure remains constant, with the increase of gas pressure, permeability of tectonic soft coal first decreases and then increases. Under the condition of low gas pressure, tectonic soft coal permeability shows a significant Klinkenberg effect.

Gas Migration in MX80 Buffer Bentonite

1996 ◽  
Vol 465 ◽  
Author(s):  
S. T. Horseman ◽  
J. F. Harrington ◽  
P. Sellin
Keyword(s):  
Flow Rate ◽  
Gas Flow ◽  
Pore Space ◽  
Swelling Pressure ◽  
Confining Pressure ◽  
Threshold Value ◽  
Gas Pressure ◽  
Two Phase ◽  
Injection Pump ◽  
Flow Law

ABSTRACTControlled flow-rate gas injection experiments have been performed on pre-compacted samples of KBS-3 specification M×801 buffer bentonite using helium as a safe replacement for hydrogen. By simultaneously applying a confining pressure and backpressure, specimens were isotropically-consolidated and fully water-saturated under pre-determined effective stress conditions, before injecting gas using a syringe pump. Ingoing and outgoing gas fluxes were monitored. All tests exhibited a conspicuous threshold pressure for breakthrough, somewhat larger than the sum of the swelling pressure and the backpressure. All tests showed a post-peak negative transient leading to steady-state gas flow. Using a stepped history of flow rate, the flow law was shown to be nonlinear. With the injection pump stationary (i.e. zero applied flow rate), gas pressure declined with time to a finite value. When gas flow was reestablished, the threshold value for gas breakthrough was found to be significantly lower than in virgin clay. There is strong evidence to suggest that the capillary pressure for the penetration of interparticle pore space of buffer bentonite is of such a magnitude that normal two-phase flow is impossible. Gas entry and breakthrough is therefore accompanied by the development of microcracks which propagate through the clay from gas source to sink. The experiments suggest that these pathways open under high gas pressure conditions and partially close if gas pressure falls, providing a possible explanation of the nonlinearity of the flow law.

scholarly journals Experimental Study on the Deformation and Permeability Characteristics of Raw Coal under the Coupling Effect of Confining Pressure and Pore Pressure

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Kangwu Feng ◽  
Kequan Wang ◽  
Yushun Yang
Keyword(s):  
Elastic Modulus ◽  
Pore Pressure ◽  
Coupling Effect ◽  
Axial Strain ◽  
Confining Pressure ◽  
Gas Pressure ◽  
Peak Strength ◽  
Permeability Evolution ◽  
Permeability Characteristics ◽  
Deformation Properties

The effects of confining pressure and pore pressure on the deformation and permeability characteristics of raw coal are studied experimentally. The deformation properties of raw coal by fracture and its permeability evolution laws under the coupling effect of confining pressure and pore pressure were further studied using a tri-axial servo-controlled seepage system for thermo-fluid-solid coupling of methane-bearing coal. The effects of confining pressure and gas pressure on the strength, elastic modulus, and permeability of raw coal were also analyzed. From the results, it was observed that rise in the confining pressure results in reduction of the initial permeability of raw coal and simultaneously increase its strength which results in higher axial deformation upon failure. Rise in gas pressure would increase the permeability and axial strain of raw coal on the whole and reduce its peak strength. Permeability first decreased and then increased during the loading of deviator stress, following a “V-shaped” change pattern. The results of sensitivity analysis indicated that confining pressure more significantly affected the peak strength and elastic modulus than gas pressure, while the gas pressure more significantly affected the permeability of the material than its confining pressure.

scholarly journals Experimental Study on the Permeability Evolution and Gas Flow Law of Post-Strength Soft Coal

2020 ◽  
Vol 10 (3) ◽  
pp. 1039
Author(s):  
Chao Hou ◽  
Jianhong Ma ◽  
Xiaoguang Jin ◽  
Du Ni
Keyword(s):  
Experimental Study ◽  
Gas Flow ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Permeability Evolution ◽  
Axial Pressure ◽  
Soft Coal ◽  
Secondary Damage ◽  
Flow Law ◽  
Gas Disasters

Permeability is an essential indicator for predicting gas drainage yield and preventing mine gas disasters, which is significantly influenced by the stress paths and the integrity of coal. Conventional research on permeability mainly focused on the permeability evolution of initial undamaged or fractured (prefabricated fractures) coal under various stress paths; little attention has been paid to post-strength coal (stress-induced damage), especially for soft coal. To determine the permeability evolution and gas flow law of post-strength soft coal samples under various stress paths, we used the experimental method combined with the numerical method in this study. The results showed that when the confining pressure and axial pressure of post-strength soft coal samples were unloaded, the permeability increased by 1.25–1.32 times; when the coal samples were loaded into the secondary damage, the permeability first decreased and then increased. The simulation part in this study found that the development of the fracture of coal samples under triaxial compression was divided into four stages. Gas flow law of post-strength soft coal was significantly influenced by fracture locations, and the gas pressure and gas flow field near the fracture were disturbed.

scholarly journals Permeability Evolution of Naturally Fractured Coal Injected with High-Temperature Nitrogen: Experimental Observations

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 296
Author(s):  
Shengcheng Wang ◽  
Haijian Li ◽  
Lanying Huang
Keyword(s):  
High Temperature ◽  
New Technology ◽  
Injection Pressure ◽  
Mine Safety ◽  
Stable Range ◽  
Permeability Evolution ◽  
Cycle Number ◽  
Coal Permeability ◽  
Naturally Fractured ◽  
Maximum Permeability

The permeability of more than 70% of coal seams in China is less than 1 mD, creating difficulties in recovering underground coal methane. Therefore, a new technology of high-temperature nitrogen (HTN2) injection into the coal seam was proposed to improve the coal permeability and gas extraction rate. In this paper, the effects of the N2 temperature, injection pressure and cycle number on the permeability of naturally fractured coking coal has been investigated. When HTN2 was injected into coal samples, the results indicated that the permeability decreased over time in the beginning, suddenly increased to a large value, and was subsequently maintained in a relatively stable range. The maximum permeability ratio increased with the rise of the N2 temperature and injection pressure. An analysis indicated that the increase of coal permeability was the result of the increase of the global coal strain caused by thermal expansion and the adsorption-induced expansion. The maximum permeability ratios in various cycles of multicycle N2 injection into the coal sample were all greater than 1.0 while progressively declining. Obviously, the alternating stress was conducive to the further expansion of the coal fractures to increase the coal permeability. However, on the basis of the first period of expansion, re-expansion was difficult and required more energy. The effects of multicycle N2 injection on coal permeability have been considerably improved when compared with N2 injection with only one cycle. The research results are helpful for rapidly extracting methane and guaranteeing mine safety.

scholarly journals Coupled Effects of Stress, Moisture Content and Gas Pressure on the Permeability Evolution of Coal Samples: A Case Study of the Coking Coal Resourced from Tunlan Coalmine

Water ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 1653
Author(s):  
Guofu Li ◽  
Yi Wang ◽  
Junhui Wang ◽  
Hongwei Zhang ◽  
Wenbin Shen ◽  
...  
Keyword(s):  
Moisture Content ◽  
Coalbed Methane ◽  
Gas Permeability ◽  
Axial Stress ◽  
Gas Pressure ◽  
Pressure Curve ◽  
Permeability Evolution ◽  
Confining Stress ◽  
Qinshui Basin ◽  
Gas Seepage

Deep coalbed methane (CBM) is widely distributed in China and is mainly commercially exploited in the Qinshui basin. The in situ stress and moisture content are key factors affecting the permeability of CH4-containing coal samples. Therefore, considering the coupled effects of compressing and infiltrating on the gas permeability of coal could be more accurate to reveal the CH4 gas seepage characteristics in CBM reservoirs. In this study, coal samples sourced from Tunlan coalmine were employed to conduct the triaxial loading and gas seepage tests. Several findings were concluded: (1) In this triaxial test, the effect of confining stress on the permeability of gas-containing coal samples is greater than that of axial stress. (2) The permeability versus gas pressure curve of coal presents a ‘V’ shape evolution trend, in which the minimum gas permeability was obtained at a gas pressure of 1.1MPa. (3) The gas permeability of coal samples decreased exponentially with increasing moisture content. Specifically, as the moisture content increasing from 0.18% to 3.15%, the gas permeability decreased by about 70%. These results are expected to provide a foundation for the efficient exploitation of CBM in Qinshui basin.

Pressure Assisted Sintering of an Aluminium Alloy

2009 ◽  
Vol 618-619 ◽  
pp. 627-630
Author(s):  
Stephen J. Bonner ◽  
Graham B. Schaffer ◽  
Ji Yong Yao
Keyword(s):  
Aluminium Alloy ◽  
Gas Flow ◽  
Isothermal Holding ◽  
Horizontal Tube ◽  
Elevated Pressure ◽  
Nitrogen Pressure ◽  
Gas Pressure ◽  
Densification Rate ◽  
Conventional Press ◽  
Gas Pressures

An aluminium alloy was sintered using a conventional press and sinter process, at various gas pressures, to observe the effect of sintering gas pressure on the densification rate. Compacts of aluminium alloy 2712 (Al-3.8Cu-1Mg-0.7Si-0.1Sn) were prepared from elemental powders and sintered in a horizontal tube furnace under nitrogen or argon at 590°C for up to 60 minutes, and air cooled. The gas flow was adjusted to achieve specific gas pressures in the furnace. It has been found that increasing the nitrogen pressure at the start of the isothermal holding stage to 160kPa increased the densification rate compared to standard atmospheric pressure sintering. Increasing the nitrogen pressure further, up to 600kPa, had no additional benefit. The densification rate was increased significantly by increasing the gas pressure to 600kPa during both heating and isothermal holding. Under argon the elevated pressure did not increase the densification rate. Results seem to suggest that the beneficial effect of the elevated pressure on the rate of densification is related to nitride formation.

Sign in / Sign up

Export Citation Format

Share Document