scholarly journals Selection of coefficients at determining the cost of kinetic energy cost on the vehicle deformation

2019 ◽  
Vol 16 (1) ◽  
pp. 152-157
Author(s):  
S. S. Evtukov ◽  
◽  
E. V. Golov ◽  
Keyword(s):  
Kinetic Energy ◽  
Energy Cost ◽  
The Cost ◽  
Selection Of

Determination of the minimum number of technological bases of a part

2020 ◽  
pp. 73-75
Author(s):  
B.M. Bazrov ◽  
T.M. Gaynutdinov
Keyword(s):  
Cost Price ◽  
Labor Input ◽  
Part Surface ◽  
Technological Base ◽  
Size Accuracy ◽  
Minimum Number ◽  
The Cost ◽  
Input Cost ◽  
Selection Of

The selection of technological bases is considered before the choice of the type of billet and the development of the route of the technological process. A technique is proposed for selecting the minimum number of sets of technological bases according to the criterion of equality in the cost price of manufacturing the part according to the principle of unity and combination of bases at this stage. Keywords: part, surface, coordinating size, accuracy, design and technological base, labor input, cost price. [email protected]

scholarly journals The Recent Progress of Natural Sources and Manufacturing Process of Biodiesel: A Review

2021 ◽  
Vol 13 (10) ◽  
pp. 5599
Author(s):  
Eko Supriyanto ◽  
Jayan Sentanuhady ◽  
Ariyana Dwiputra ◽  
Ari Permana ◽  
Muhammad Akhsin Muflikhun
Keyword(s):  
Recent Progress ◽  
Review Paper ◽  
Ghg Emissions ◽  
Production Method ◽  
Biodiesel Production ◽  
Natural Sources ◽  
Harmful Emissions ◽  
Daily Energy ◽  
The Cost ◽  
Selection Of

Biodiesel has caught the attention of many researchers because it has great potential to be a sustainable fossil fuel substitute. Biodiesel has a non-toxic and renewable nature and has been proven to emit less environmentally harmful emissions such as hydrocarbons (HC), and carbon monoxide (CO) as smoke particles during combustion. Problems related to global warming caused by greenhouse gas (GHG) emissions could also be solved by utilizing biodiesel as a daily energy source. However, the expensive cost of biodiesel production, mainly because of the cost of natural feedstock, hinders the potential of biodiesel commercialization. The selection of natural sources of biodiesel should be made with observations from economic, agricultural, and technical perspectives to obtain one feasible biodiesel with superior characteristics. This review paper presents a detailed overview of various natural sources, their physicochemical properties, the performance, emission, and combustion characteristics of biodiesel when used in a diesel engine. The recent progress in studies about natural feedstocks and manufacturing methods used in biodiesel production were evaluated in detail. Finally, the findings of the present work reveal that transesterification is currently the most superior and commonly used biodiesel production method compared to other methods available.

Recruitment and selection of couples for intervention research: Achieving developmental homogeneity at the cost of demographic diversity.

2006 ◽  
Vol 74 (4) ◽  
pp. 777-784 ◽  
Author(s):  
Ronald D. Rogge ◽  
Rebecca J. Cobb ◽  
Lisa B. Story ◽  
Matthew D. Johnson ◽  
Erika E. Lawrence ◽  
...  
Keyword(s):  
Intervention Research ◽  
Demographic Diversity ◽  
Recruitment And Selection ◽  
The Cost ◽  
Selection Of

Construction of Temporary Accommodation Camp and Selection of Optimal Type of Building

2015 ◽  
Vol 725-726 ◽  
pp. 105-110
Author(s):  
Aleksandr Birjukov ◽  
Sergey Bolotin
Keyword(s):  
Type Systems ◽  
Structural Systems ◽  
Basic Criterion ◽  
Economic Indexes ◽  
The Cost ◽  
Container Type ◽  
Selection Of ◽  
Optimal Type ◽  
Temporary Accommodation

Surveys performed nationwide show that mobile temporary accommodation camps are being manufactured by more than 200 specialized enterprises (without considering the minor manufacturers) acting under different ministries and agencies. According to the analysis performed, today 26 basic mobile structural systems consisting of 18 conveyor-type and 8 demountable-type systems are being used on a national basis. Today national manufacturers are producing more than 250 types of container-type buildings and facilities which differ in functionality, capacity, climatic category, price and other technical-and-economic indexes. Use of mobile accommodation complexes is characterized by certain advantages. Basic criterion for mobile accommodation camp construction consists in its timely commissioning. Basic predicted indexes affecting the cost of temporary accommodation camp could serve as an endorsement of the forwarded standpoint.

The Use of SGLT2i and GLP-1 RA in Patients with Type 2 Diabetes in Thailand: Evidence Review and Recommendations

2021 ◽  
Vol 104 (11) ◽  
pp. 1850-1865
Keyword(s):  
Type 2 Diabetes ◽  
Glucose Lowering ◽  
Sodium Glucose Cotransporter ◽  
Evidence Review ◽  
Glucagon Like Peptide ◽  
Glucagon Like Peptide 1 ◽  
Glucose Lowering Therapy ◽  
The Cost ◽  
Selection Of

Background: Cardiovascular (CV) and renal comorbidities are common among type 2 diabetes (T2D) patients, and significantly increase the cost and burden of care. Both sodium-glucose cotransporter-2 inhibitors (SGLT2i) and glucagon-like peptide-1 receptor agonists (GLP-1 RA) improve key outcomes including major CV events, hospitalization for heart failure, and renal outcomes, albeit to varying degrees in different T2D populations. Materials and Methods: The authors reviewed evidence from GLP-1 RA and SGLT2i CV outcomes trials and real-world studies in Thailand and elsewhere. Results: The authors formulated recommendations to guide selection of anti-diabetes medication based on patients’ clinical characteristics and CV or renal risk profile. Conclusion: These recommendations could help guide management of CV/renal comorbidities and risk alongside glucose-lowering therapy for individual patients. Keywords: Type 2 diabetes mellitus; Cardiovascular diseases; Chronic kidney disease; Clinical outcomes; SGLT2i; GLP-1 RA

Speed, stride frequency and energy cost per stride: how do they change with body size and gait?

1988 ◽  
Vol 138 (1) ◽  
pp. 301-318 ◽  
Author(s):  
N. C. Heglund ◽  
C. R. Taylor
Keyword(s):  
Body Size ◽  
Body Mass ◽  
Energy Cost ◽  
Reaction Force ◽  
Stride Frequency ◽  
Energetic Cost ◽  
Published Data ◽  
Frequency Change ◽  
Cost Of Locomotion ◽  
The Cost

In this study we investigate how speed and stride frequency change with body size. We use this information to define ‘equivalent speeds’ for animals of different size and to explore the factors underlying the six-fold difference in mass-specific energy cost of locomotion between mouse- and horse-sized animals at these speeds. Speeds and stride frequencies within a trot and a gallop were measured on a treadmill in 16 species of wild and domestic quadrupeds, ranging in body size from 30 g mice to 200 kg horses. We found that the minimum, preferred and maximum sustained speeds within a trot and a gallop all change in the same rather dramatic manner with body size, differing by nine-fold between mice and horses (i.e. all three speeds scale with about the 0.2 power of body mass). Although the absolute speeds differ greatly, the maximum sustainable speed was about 2.6-fold greater than the minimum within a trot, and 2.1-fold greater within a gallop. The frequencies used to sustain the equivalent speeds (with the exception of the minimum trotting speed) scale with about the same factor, the −0.15 power of body mass. Combining this speed and frequency data with previously published data on the energetic cost of locomotion, we find that the mass-specific energetic cost of locomotion is almost directly proportional to the stride frequency used to sustain a constant speed at all the equivalent speeds within a trot and a gallop, except for the minimum trotting speed (where it changes by a factor of two over the size range of animals studied). Thus the energy cost per kilogram per stride at five of the six equivalent speeds is about the same for all animals, independent of body size, but increases with speed: 5.0 J kg-1 stride-1 at the preferred trotting speed; 5.3 J kg-1 stride-1 at the trot-gallop transition speed; 7.5 J kg-1 stride-1 at the preferred galloping speed; and 9.4 J kg-1 stride-1 at the maximum sustained galloping speed. The cost of locomotion is determined primarily by the cost of activating muscles and of generating a unit of force for a unit of time. Our data show that both these costs increase directly with the stride frequency used at equivalent speeds by different-sized animals. The increase in cost per stride with muscles (necessitating higher muscle forces for the same ground reaction force) as stride length increases both in the trot and in the gallop.

Influence of the cost of technological equipment of body production on indicators of efficiency of working processes

2021 ◽  
pp. 28-32
Author(s):  
Keyword(s):  
Quality Index ◽  
Production Efficiency ◽  
Statistical Data ◽  
The Body ◽  
Technological Equipment ◽  
Production Body ◽  
Body Production ◽  
The Cost ◽  
Efficiency Indicators ◽  
Selection Of

The possibilities for the development of bodywork in the context of the growing level of competition are analyzed in the article. The technological processes of bodywork are considered and the problem of choosing technological equipment is indicated. The statistical data about the efficiency indicators of company body divisions, operating in the body repair market in Krasnoyarsk, are presented. A composite quality index for the equipment of the bodywork department (using the example of body stocks) is proposed and calculated, and on its basis, some recommendations are given for companies which plan to enter the market of body repair services. Keywords: body production, body repair, body equipment, body production efficiency, selection of technological equipment

Prescreening in large populations as a tool for identifying elevated CO2-responsive genotypes in plants

2019 ◽  
Vol 46 (1) ◽  
pp. 1 ◽  
Author(s):  
Hiroyuki Shimono ◽  
Graham Farquhar ◽  
Matthew Brookhouse ◽  
Florian A. Busch ◽  
Anthony O'Grady ◽  
...  
Keyword(s):  
Genetic Selection ◽  
Co2 Concentration ◽  
Elevated Atmospheric Co2 ◽  
High Performing ◽  
Active Selection ◽  
Wide Range ◽  
Large Populations ◽  
Increase Productivity ◽  
The Cost ◽  
Selection Of

Elevated atmospheric CO2 concentration (e[CO2]) can stimulate the photosynthesis and productivity of C3 species including food and forest crops. Intraspecific variation in responsiveness to e[CO2] can be exploited to increase productivity under e[CO2]. However, active selection of genotypes to increase productivity under e[CO2] is rarely performed across a wide range of germplasm, because of constraints of space and the cost of CO2 fumigation facilities. If we are to capitalise on recent advances in whole genome sequencing, approaches are required to help overcome these issues of space and cost. Here, we discuss the advantage of applying prescreening as a tool in large genome×e[CO2] experiments, where a surrogate for e[CO2] was used to select cultivars for more detailed analysis under e[CO2] conditions. We discuss why phenotypic prescreening in population-wide screening for e[CO2] responsiveness is necessary, what approaches could be used for prescreening for e[CO2] responsiveness, and how the data can be used to improve genetic selection of high-performing cultivars. We do this within the framework of understanding the strengths and limitations of genotype–phenotype mapping.

scholarly journals Transoperative refusion: a simple and safe method in emergency surgery

2014 ◽  
Vol 41 (4) ◽  
pp. 292-296
Author(s):  
Luiz Carlos Buarque Gusmão ◽  
Sérgio Henrique Chagas Valoes ◽  
José da Silva Leitão Neto
Keyword(s):  
Cost Benefit ◽  
Blood Transfusions ◽  
Factor V ◽  
West Nile Fever ◽  
Clotting Factors ◽  
Blood Contamination ◽  
Simple Method ◽  
Cost Benefit Ratio ◽  
The Cost ◽  
Selection Of

The objective is to reinforce the importance of blood reinfusion as a cheap, safe and simple method, which can be used in small hospitals, especially those in which there is no blood bank. Moreover, even with the use of devices that perform the collection and filtration of blood, more recent studies show that the cost-benefit ratio is much better when autologous transfusion is compared with blood transfusions, even when there is injury to hollow viscera and blood contamination. It is known that the allogeneic blood transfusion carries a number of risks to patients, among them are the coagulation disorders mediated by excess enzymes in the conserved blood, and deficiency in clotting factors, mainly the Factor V, the proacelerin. Another factor would be the risk of contamination with still unknown pathogens or that are not investigated during screening for selection of donors, such as the West Nile Fever and Creutzfeldt-Jacob, better known as "Mad Cow" disease. Comparing both methods, we conclude that blood autotransfusion has numerous advantages over heterologous transfusion, even in large hospitals. We are not against blood transfusions, just do not agree that the patient's own blood is discarded without making sure there will be enough blood in stock to get him out of the hemorrhagic shock.

Computerized Selection of Optimum Machining Conditions for a Job Requiring Multiple Operations

1978 ◽  
Vol 100 (3) ◽  
pp. 356-362 ◽  
Author(s):  
S. S. Rao ◽  
S. K. Hati
Keyword(s):  
Nonlinear Programming ◽  
Mathematical Programming ◽  
Machine Tools ◽  
Machining Conditions ◽  
Coupling Constraints ◽  
Programming Techniques ◽  
Mathematical Programming Problems ◽  
The Individual ◽  
The Cost ◽  
Selection Of

The problem of determining the optimum machining conditions for a job requiring multiple operations has been investigated. Three objectives, namely, the minimization of the cost of production per piece, the maximization of the production rate and, the maximization of the profit are considered in this work. In addition to the usual constraints that arise from the individual machine tools, some coupling constraints have been included in the formulation. The problems are formulated as standard mathematical programming problems, and nonlinear programming techniques are used to solve the problems.

Sign in / Sign up

Export Citation Format

Share Document