scholarly journals Microbiological Quality of Slovak Traditional Cheese

2020 ◽  
Vol 64 (1) ◽  
pp. 60-65
Author(s):  
L. Cabanová ◽  
P. Niníková

AbstractThe aim of this study was to investigate the micro-biological quality of traditional Slovak “bryndza” cheese made in Slovakia. Besides the common pathogenic bacteria, we focused on the analyses of verocytotoxigenic Escherichia coli (VTEC), the occurrence of which has been analysed only occasionally in a few products. As we chose food of the highest risk which contained raw milk, we expected several positive findings. The presence of Salmonella spp., Listeria monocytogenes and Campylobacter spp. was not confirmed. The enumeration of Staphylococcus aureus was more successful. In the case of VTEC stx and eae screening, the presence of genes producing verocytotoxins vtx1, vtx2 and the gene encoding virulent factor intimin—eae in nine samples by molecular-biological methods were revealed. Only one isolate, which carried genes vtx1 a vtx2 and did not belong to these serogroups: O157, O111, O26, O103, O145, or O104, was detected by confirmation assays.

Domiati cheese is the most popular brand of cheese ripened in brine in the Middle East in terms of consumed quantities. This study was performed to investigate the impact of the microbiological quality of the used raw materials, the applied traditional processing techniques and ripening period on the quality and safety of the produced cheese. Three hundred random composite samples were collected from three factories at Fayoum Governorate, Egypt. Collected samples represent twenty-five each of: raw milk, table salt, calf rennet, microbial rennet, water, environmental air, whey, fresh cheese, ripened cheese & swabs from: worker hands; cheese molds and utensils; tanks. All samples were examined microbiologically for Standard Plate Count (SPC), coliforms count, Staphylococcus aureus (S. aureus) count, total yeast & mould count, presence of E. coli, Salmonellae and Listeria monocytogenes (L. monocytogenes). The mean value of SPC, coliforms, S. aureus and total yeast & mould counts ranged from (79×102 CFU/m3 for air to 13×108 CFU/g for fresh cheese), (7×102 MPN/ cm2 for tank swabs to 80×106 MPN/ml for raw milk), (9×102 CFU/g for salt to 69×106 CFU/g for fresh cheese) and (2×102 CFU/cm2 for hand swabs to 60×104 CFU/g for fresh cheese), respectively. Whereas, E. coli, Salmonella and L. monocytogenes failed to be detected in all examined samples. There were significant differences in all determined microbiological parameters (p ≤0.05) between fresh and ripened cheese which may be attributed to different adverse conditions such as water activity, pH, salt content and temperature carried out to improve the quality of the product.


1995 ◽  
Vol 31 (5-6) ◽  
pp. 75-79 ◽  
Author(s):  
M. Würzer ◽  
A. Wiedenmann ◽  
K. Botzenhart

In Germany the application of procedures such as flocculation and filtration in the preparation of drinking water results in the annual production of an estimated 500,000 t of sediments and sludges. Some of these residues have a potential for being reused, for example in agriculture, forestry, brickworks or waste water treatment. To assess the microbiological quality of residues from waterworks methods for the detection of enterobacteria, Escherichia coli, Salmonella, Pseudomonas aeruginosa, Legionella, poliovirus, Ascaris suis eggs and Cryptosporidium have been evaluated regarding their detection limits and were applied to various residues from German waterworks. Results show that sediments and sludges may contain pathogenic bacteria, viruses and protista. When residues from waterworks are intended to be reused in agriculture or forestry the microbiological quality should therefore be considered.


Author(s):  
Gökhan CENGİZ ◽  
Evren ALGIN YAPAR

In the direction of microbiological quality control analysis in pharmaceutical products, determining the microbiological load of the product at the end-use stage is very important for human health. Quality control parameters in pharmaceutical products vary according to the structure of the type of product and administration route. In this context, according to the pharmacopoeias, parenteral products and eye drops are classified as sterile products and the other group of pharmaceuticals are classified as non-sterile products. However, non-sterile pharmaceuticals also must have a certain microbiological quality. For this reason, the pharmaceuticals should have a certain microbiological load and should not contain defined microorganisms specified to its type. Since the control of the microbiological quality of the products is important for safety, it should be determined by quality control analysis. In this study, standard methods used to detect specific microorganism in pharmaceutical products were compared. Application steps in standard methods and identification tests of specific microorganisms were examined. In addition, studies that are alternative to standard methods were evaluated. Peer Review History: Received: 5 September 2020; Revised: 20 October; Accepted: 28 October, Available online: 15 November 2020 UJPR follows the most transparent and toughest ‘Advanced OPEN peer review’ system. The identity of the authors and, reviewers will be known to each other. This transparent process will help to eradicate any possible malicious/purposeful interference by any person (publishing staff, reviewer, editor, author, etc) during peer review. As a result of this unique system, all reviewers will get their due recognition and respect, once their names are published in the papers. We expect that, by publishing peer review reports with published papers, will be helpful to many authors for drafting their article according to the specifications. Auhors will remove any error of their article and they will improve their article(s) according to the previous reports displayed with published article(s). The main purpose of it is ‘to improve the quality of a candidate manuscript’. Our reviewers check the ‘strength and weakness of a manuscript honestly’. There will increase in the perfection, and transparency. Received file Average Peer review marks at initial stage: 6.0/10 Average Peer review marks at publication stage: 8.0/10 Reviewer(s) detail: Dr. Mujde Eryilmaz, Ankara University,Turkey, [email protected] Dr. Rawaa Souhil Al-Kayali, Aleppo University, Syria, [email protected]   Comments of reviewer(s): Similar Articles: CHEMICAL COMPOSITION AND ANTIMICROBIAL ACTIVITY OF THE ESSENTIAL OILS OF FOUR VARIETIES OF LIPPIA MULTIFLORA IN BENIN ANTIMICROBIAL ACTIVITIES FOR HADHRAMI HONEY ON GROWTH OF SOME PATHOGENIC BACTERIA


2019 ◽  
Vol 40 (4) ◽  
pp. 1469
Author(s):  
José Carlos Ribeiro Júnior ◽  
Aline Marangon de Oliveira ◽  
Fernando Godoi Silva ◽  
Lorena Natalino Haber Garcia ◽  
Cátia Maria de Oliveira Lobo ◽  
...  

The dairy industry strives to produce high quality products with high nutritional value as well as to meet the legal standards for longer shelf life. However, these goals are made unfeasible by the poor quality of raw milk produced in some regions of Brazil. Others Brazilian dairy regions, however, already succeed in producing milk with low microbial counts, such as the municipality of Castro, Paraná state, designated as the ‘Brazilian dairy capital’. In order to evaluate the effect of raw milk quality on microbial counts during the shelf life of pasteurized milk, samples were collected from two dairy regions of Paraná: the northern and Castro region, characterized by milk production with high and low microbiological counts, respectively. Samples were experimentally pasteurized and the total microorganism counts were analyzed for 18 days at 7°C, using the Brazilian standard microbiological count limit for pasteurized milk (8 x 104 CFU/mL) as the end of the shelf life. Low microbiological counts in raw milk (Castro) resulted in significantly lower counts shortly after pasteurization and over the entire shelf life, meeting the pasteurized milk standard for 18 days. The temporal evolution in the counts over 18 days for the milks of high and low microbiological count was similar; however, the disparity between the absolute counts between the regions was significant (p < 0.05). Of the milk samples from northern Paraná, four (44.4%) already had counts higher than that of the legislative limit for pasteurized milk immediately after pasteurization. The others (five) reached the maximum microbiological count limit for pasteurized milk on the 6th day after pasteurization. In contrast, the milk from the Castro region remained below the limit throughout the analysis period. Thus, it can be stated that the microbiological quality of raw milk is directly related to the initial count of microorganisms after pasteurization, and that pasteurized milk produced from raw milk with low microbiological counts complies with the Brazilian legislation for 18 days following thermal processing.


2020 ◽  
Vol 18 (2) ◽  
pp. 200-206
Author(s):  
L. Bolelli ◽  
Elida Nora Ferri ◽  
Stefano Sangiorgi ◽  
Giuseppe Novelli ◽  
Stefano Girotti

Abstract Effective resin disinfection is mandatory to ensure the microbiological quality of water treated by domestic softeners. The wet and sometimes warm environment inside the softener is ideal for bacteria growth. Our research was focused on the evaluation of the microbial quality of water from softeners sanitized by chlorine solutions or by electrolytic systems. We employed the heterotrophic plate count and specific tests to monitor the presence of opportunistic and pathogenic bacteria (Pseudomonas aeruginosa, Escherichia coli, enterococci, and coliforms). Completely new devices were equipped with a commercially available electrolytic system or with a newly patented one or sanitized by automatic or manual addition of chlorine solutions. In all cases, the contamination was reduced, not completely avoided. In particular, the patented electrolytic system significantly reduced bacterial proliferation in strongly contaminated devices. Our data confirm the difficulties encountered to solve the problem of microbiological quality of softened water and offer encouraging information on new possible solutions. This article has been made Open Access thanks to the generous support of a global network of libraries as part of the Knowledge Unlatched Select initiative.


1970 ◽  
Vol 6 (2) ◽  
pp. 217-221 ◽  
Author(s):  
MTG Khan ◽  
MA Zinnah ◽  
MP Siddique ◽  
MHA Rashid ◽  
MA Islam ◽  
...  

The present study was undertaken with the aim of investigating the physical parameters (e.g. organoleptic and specific gravity of raw milk) and also to study the microbiological quality of raw milk (total viable count, Coliform count and Staphylococcal count) from different villages and Bangladesh Agricultural University (BAU) Dairy Farm of Mymensingh District of Bangladesh, during the period from July to November 2007. A total number of 100 raw milk samples were collected at morning and evening from BAU dairy farm and surrounding four villages of BAU campus. The organoleptic and bacteriological qualities of each sample were analyzed. The organoleptic examination included taste panel score to assess consumer's acceptance and the bacteriological analysis comprised enumeration of total viable count (TVC), total colifrom count (TCC) and total staphylococcal count (TSC) for the determination of sanitary quality. The organoleptic quality of the milk samples is more or less same except the Churkhai milk samples which had flat taste (in 16% milk sample). The average values of TVC/ml were log 5.920, 5.934, 6.007, 6.075 and 6.127 for BAU Dairy Farm, Boira, Shutiakhali, Churkahai and Paglabazar respectively; coliform count were log 2.501, 2.522, 2.550, 2.620 and 2.619 respectively; staphylococcal count were log 2.832, 2.812, 2.866, 2.931 and 2.988 respectively. So, it may be concluded that the raw milk samples of BAU Dairy Farm were superior to others collected from the selected villages which may be due to maintaining better hygienic condition. Key words: Raw milk, physical and microbial quality   doi: 10.3329/bjvm.v6i2.2339 Bangl. J. Vet. Med. (2008). 6 (2): 217-221


1996 ◽  
Vol 59 (9) ◽  
pp. 984-987 ◽  
Author(s):  
A. N. MUTUKUMIRA ◽  
S. B. FERESU ◽  
J. A. NARVHUS ◽  
R. K. ABRAHAMSEN

Chemical and microbiological analyses were carried out on 10 samples of raw milk collected over 6 months from the Nharira/Lancashire Milk Collection Center. The milk center is run by smallholder farmers. The purpose of the study was to evaluate the quality of the raw milk delivered to the milk collection center. The average chemical characteristics of the milk were (%): titratable acidity expressed as lactic acid, 0.21; total protein, 3.19; fat, 3.52; total solids, 11.76; and solids not fat, 8.25; the pH varied from 6.15 to 6.65. There were large variations in the microbiological composition of the raw milk with total aerobic counts ranging from 6.2 × 103 to 7.8 × 107 CFU/ml, coli forms from 3.2 × 102 to 2.3 × 105, and lactic acid bacteria from less than 1 × 103 to 2.9 × 106 CFU/ml. Yeasts and molds were less than 100 CFU/ml in 7 of the 10 samples analyzed.


1987 ◽  
Vol 50 (8) ◽  
pp. 665-668 ◽  
Author(s):  
F. F. J. NIEUWENHOF ◽  
J. D. HOOLWERF

An improved impedance method is described with a good standard deviation of repeatability (sm = 0.05 log unit) and a fair standard deviation of the estimate of the plate count from the detection time [(sy)x = 0.33 log unit]. Compared with the standard deviation of repeatability of the plate count method (0.07 log unit), the standard deviation of repeatability of the impedance method described is a significant improvement. The impedimetric experiments were done with a Bactometer M123. The detection times as measured by this instrument were compared with the plate counts at 30°C for samples of raw refrigerated farm milk. With this technique a good indication of the microbiological quality of raw milk can be obtained within 15 h.


Sign in / Sign up

Export Citation Format

Share Document