scholarly journals Aerodynamic Properties of Makhobeli, Triticale and Wheat Seeds

2014 ◽  
Vol 28 (3) ◽  
pp. 389-394 ◽  
Author(s):  
Feizollah Shahbazi ◽  
Saman Valizadeh ◽  
Ali Dowlatshah
Keyword(s):  
Moisture Content ◽  
Drag Coefficient ◽  
Terminal Velocity ◽  
Mean Value ◽  
Probability Level ◽  
Mean Values ◽  
Aerodynamic Properties ◽  
The Mean ◽  
Content Range ◽  
Wheat Seeds

Abstract The objective of this study was the evaluation of the aerodynamic properties of Makhobeli, triticale and wheat seeds as a function of moisture content from 7 to 27% (w.b). The results showed that the terminal velocity of triticale and wheat seeds increased linearly from 5.37 to 6.42 and from 6.31 to 8.02 m s-1, respectively, as the moisture content increased from 7 to 27%. Over this same moisture content range, the terminal velocity of Makhobeli seeds varied following a polynomial relationship from 4.52 to 5.07 m s-1. Makhobeli seeds had terminal velocities with a mean value of 4.73 m s-1, at different moisture contents, compared to the mean values of 5.89 and 7.13 m s-1 for triticale and wheat seeds, respectively. The mean value of drag coefficient was 1.12 for Makhobeli compared to the values of 0.92 and 0.85 for triticale and wheat, respectively. The analysis of variance showed that there were significant differences between the terminal velocity (at 1 % probability level) and drag coefficient (at 5% probability level) of Mak-hobeli with triticale and wheat seeds, which suggests that aerodynamic separation of Makhobeli from triticale and wheat is possible.

scholarly journals Aerodynamic properties of lentil seeds

2015 ◽  
Vol 29 (3) ◽  
pp. 391-396 ◽  
Author(s):  
Feizollah Shahbazi ◽  
Saman Valizadeh ◽  
Ali Dowlatshah ◽  
Ezatollah Hassanzadeh
Keyword(s):  
Reynolds Number ◽  
Moisture Content ◽  
Drag Coefficient ◽  
Terminal Velocity ◽  
Mean Value ◽  
Probability Level ◽  
Solid Materials ◽  
Aerodynamic Properties ◽  
Red Variety ◽  
Mathematical Relationships

Abstract Aerodynamic properties of solid materials have long been used to convey and separate seeds and grains during post-harvest operations. The objective of this study was evaluation of the aerodynamic properties of green and red lentil seeds as a function of moisture content from 10 to 25% (w.b.). The results showed that as the moisture content increased from 10 to 25%, the terminal velocity of seeds increased, following a linear relationship, from 6.90 to 9.14 and from 6.37 to 7.67 m s−1 for green and red lentil seeds, respectively. Seeds of the green variety had terminal velocities with a mean value of 7.89 m s−1, while the red variety had a mean value of 7.02 m s−1, for moisture content from 10 to 25%. The Reynolds number increased linearly from 2 310.90 to 3 269.23 and from 1 215.02 to 1 535.09 for green and red lentil seeds, respectively, with the increase of seeds moisture content from 10 to 25%. While, drag coefficient decreased from 0.69 to 0.40 and from 0.84 to 0.69 for green and red lentil seeds, respectively, with the increase of moisture content. Mathematical relationships were developed to relate the change in seeds moisture content with the values of aerodynamic properties obtained. The analysis of variance showed that the effect of moisture content on all aerodynamic properties of lentil beans was significant at the 1% probability level.

scholarly journals Evaluation and modeling of aerodynamic properties of mung bean seeds

2015 ◽  
Vol 29 (1) ◽  
pp. 121-126 ◽  
Author(s):  
Feizollah Shahbazi
Keyword(s):  
Reynolds Number ◽  
Moisture Content ◽  
Drag Coefficient ◽  
Mung Bean ◽  
Terminal Velocity ◽  
Mean Value ◽  
Probability Level ◽  
Solid Materials ◽  
Aerodynamic Properties ◽  
Mathematical Relationships

Abstract Aerodynamic properties of solid materials have long been used to convey and separate seeds and grains during post harvest operations. The objective of this study was the evaluation of the aerodynamic properties of mung bean seeds as a function of moisture content and two grades referred to above and below a cut point of 4.8 mm in length. The results showed that as the moisture content increased from 7.8 to 25% (w.b.), the terminal velocity of seeds increased following a polynomial relationship, from 7.28 to 8.79 and 6.02 to 7.12 m s-1, for grades A and B, respectively. Seeds at grade A had terminal velocities with a mean value of 8.05 m s-1, while at grade B had a mean value of 6.46 m s-1. The Reynolds number of both grades increased linearly with the increase of seeds moisture content, while the drag coefficient decreased with the increase of moisture content. Mathematical relationships were developed to relate the change in seeds moisture content with the obtained values of aerodynamic properties. The analysis of variance showed that moisture content had a significant effect, at 1% probability level, on all the aerodynamics properties of mung beans.

scholarly journals Effect of moisture content on terminal velocity of lentil grain

2019 ◽  
Vol 65 (No. 1) ◽  
pp. 7-12
Author(s):  
Zahra Basati ◽  
Ezzatollah Askari Asli- Ardeh ◽  
Vali Rasooli-Sharabiani
Keyword(s):  
Wind Tunnel ◽  
Moisture Content ◽  
Aerodynamic Characteristics ◽  
Terminal Velocity ◽  
Mean Value ◽  
Vertical Wind ◽  
Airflow Rate ◽  
Section Area ◽  
The Mean ◽  
Different Parts

One of the aerodynamic characteristics of lentil is its terminal velocity. In order to determinate the terminal velocity, was designed a vertical wind tunnel. It was fabricated based on existing methods and standards. For decreasing the non-uniformity of airflow in the vertical wind column, was used a honey comb test area with 5 mesh screens. So, a wind tunnel nozzle was designed and fabricated using Morel method with the aim of increasing airflow rate and decreasing losses due to mesh screens. The height and section area of tunnel were 1.425 m and 0.1 × 0.1 m2, respectively. The pressure loss values were calculated at different parts of tunnel and then, the required power of tunnel was determined. In this study, lentil grains of Kimia and Gachsaran varieties were separated at three groups based on their size (small, medium and large). Then, the terminal velocity was measured at 5 levels of moisture content (8, 12, 16, 20 and 24% (w.b.)) for each group. The results showed that Kimia and Gachsaran variety had the highest (7.204 m·s–1) and the lowest (6.987 m·s–1) terminal velocity, respectively. The mean value of terminal velocity increased linearly from 6.751 to 7.396 m·s–1 by increasing the moisture content from 8 to 24% (w.b.). Also, by increasing the grains dimension from small to large, the terminal velocity increased from 6.345 to 7.792 m·s–1.

Aerodynamic properties of Faba bean (Vicia faba L.) Seeds

2016 ◽  
Vol 39 (3) ◽  
Author(s):  
Mesut Dilmac ◽  
Sefa Tarhan ◽  
Hakan Polatci
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Drag Coefficient ◽  
Vicia Faba ◽  
Faba Bean ◽  
Terminal Velocity ◽  
Moisture Contents ◽  
Aerodynamic Properties ◽  
Agricultural Materials ◽  
Agricultural Material

Aerodynamic properties of agricultural materials are the physical properties considering the reaction of agricultural material piles or seeds against airflow. The airflow resistance of faba bean (<italic>Vicia faba</italic> L.) seed piles was experimentally determined and mathematically modeled for two different moisture contents (11.4 % and 25.8% w.b.) for the superficial air velocities ranging from 0.0225 to 1.395 m<sup>3</sup>·m<sup>−2</sup>·s<sup>−1</sup>. Modified Shedd’s equation and Hukill-Ives equation can be interchangeably used to design aeration systems for the storage and drying bins of faba bean seeds. The terminal velocity values are 11.68 and 12.87 m·s<sup>−1</sup> for the moisture contents of 11.4% and 25.8% (w.b.), respectively. The drag coefficient values are 1.02 and 0.88 for the moisture contents of 11.4% and 25.8% (w.b.), respectively. Moisture content increased terminal velocity but decreased drag coefficient.

Mechanical Damage to Corn Seeds

2018 ◽  
Vol 51 (3) ◽  
pp. 1-12 ◽  
Author(s):  
F. Shahbazi ◽  
R. Shahbazi
Keyword(s):  
Moisture Content ◽  
Impact Damage ◽  
Mechanical Damage ◽  
Mean Value ◽  
Physical Damage ◽  
Seed Moisture Content ◽  
Mean Values ◽  
Energy Impact ◽  
The Mean ◽  
The Impact

Abstract The objective of this research was to evaluate and model the mechanical damage to corn seeds under impact loading. The experiments were conducted at moisture contents of 7.60 to 25% (wet basis) and at the impact energies of 0.1, 0.2 and 0.3 J, using an impact damage assessment device. The results showed that impact energy, moisture content, and the interaction effects of these two variables significantly influenced the percentage of physical damage in corn seeds (p<0.01). Increasing the impact of the energy from 0.1 to 0.3 J caused a significant increase in the mean values of damage from 23.73 to 83.49%. The mean values of physical damage decreased significantly by a factor of 1.92 (from 83.75 to 43.56%), with an increase in the moisture content from 7.6 to 20%. However, by a higher increase in the moisture from 20 to 25%, the mean value of damage showed a non-significant increasing trend. There was an optimum moisture level of about 17 to 20%, at which seed damage was minimized. An empirical model composed of seed moisture content and energy impact was developed for accurately describing the percentage of physical damage to corn seeds. It was found that the model has provided satisfactory results over the whole set of values for the dependent variable.

Seasonal trends in the stable isotopic composition of snow and meltwater runoff in a subarctic catchment at Okstindan, Norway

2004 ◽  
Vol 35 (2) ◽  
pp. 119-137 ◽  
Author(s):  
S.D. Gurney ◽  
D.S.L. Lawrence
Keyword(s):  
Isotopic Composition ◽  
Mean Value ◽  
Mean Values ◽  
Stable Isotopic Composition ◽  
Meltwater Runoff ◽  
Stable Isotopic ◽  
The Mean ◽  
The Difference ◽  
Δ18o And Δd

Seasonal variations in the stable isotopic composition of snow and meltwater were investigated in a sub-arctic, mountainous, but non-glacial, catchment at Okstindan in northern Norway based on analyses of δ18O and δD. Samples were collected during four field periods (August 1998; April 1999; June 1999 and August 1999) at three sites lying on an altitudinal transect (740–970 m a.s.l.). Snowpack data display an increase in the mean values of δ18O (increasing from a mean value of −13.51 to −11.49‰ between April and August), as well as a decrease in variability through the melt period. Comparison with a regional meteoric water line indicates that the slope of the δ18O–δD line for the snowpacks decreases over the same period, dropping from 7.49 to approximately 6.2.This change points to the role of evaporation in snowpack ablation and is confirmed by the vertical profile of deuterium excess. Snowpack seepage data, although limited, also suggest reduced values of δD, as might be associated with local evaporation during meltwater generation. In general, meltwaters were depleted in δ18O relative to the source snowpack at the peak of the melt (June), but later in the year (August) the difference between the two was not statistically significant. The diurnal pattern of isotopic composition indicates that the most depleted meltwaters coincide with the peak in temperature and, hence, meltwater production.

A new simpler approach to measure the strength of toe plantar flexion requiring no mechanical restraint with a light-weight device

2021 ◽  
pp. 095441192110029
Author(s):  
Yuko Komuro ◽  
Yuji Ohta
Keyword(s):  
Plantar Flexion ◽  
Mean Value ◽  
Simple Approach ◽  
Light Weight ◽  
New Approach ◽  
Mean Values ◽  
Mechanical Restraint ◽  
Significant Difference ◽  
Ankle Joints ◽  
The Mean

Conventionally, the strength of toe plantar flexion (STPF) is measured in a seated position, in which not only the target toe joints but also the knee and particularly ankle joints, are usually restrained. We have developed an approach for the measurement of STPF which does not involve restraint and considers the interactions of adjacent joints of the lower extremities. This study aimed to evaluate this new approach and comparing with the seated approach. A thin, light-weight, rigid plate was attached to the sole of the foot in order to immobilize the toe area. Participants were 13 healthy young women (mean age: 24 ± 4 years). For measurement of STPF with the new approach, participants were instructed to stand, raise the device-wearing leg slightly, plantar flex the ankle, and push the sensor sheet with the toes to exert STPF. The sensor sheet of the F-scan II system was inserted between the foot sole and the plate. For measurement with the seated approach, participants were instructed to sit and push the sensor with the toes. They were required to maintain the hip, knee, and ankle joints at 90°. The mean values of maximum STPF of the 13 participants obtained with each approach were compared. There was no significant difference in mean value of maximum STPF when the two approaches were compared (new: 59 ± 23 N, seated: 47 ± 33 N). The coefficient of variation of maximum STPF was smaller for data obtained with the new approach (new: 39%, seated: 70%). Our simple approach enables measurement of STPF without the need for the restraints that are required for the conventional seated approach. These results suggest that the new approach is a valid method for measurement of STPF.

scholarly journals AB0101 THE IMPACT OF TIME SPAN TO ACHIEVE BOOLEAN REMISSION FOR MAINTAINING DISEASE ACTIVITY AFTER ACQUISITION IN RHEUMATOID ARTHRITIS PATIENT

2021 ◽  
Vol 80 (Suppl 1) ◽  
pp. 1079.1-1079
Author(s):  
I. Yoshii
Keyword(s):  
Rheumatoid Arthritis ◽  
Disease Activity ◽  
Disease Duration ◽  
Remission Rate ◽  
Mean Value ◽  
Time Span ◽  
Mean Values ◽  
The Mean ◽  
The Relationship

Background:Boolean remission criteria is one most popular and stringent criteria in treating patient with rheumatoid arthritis (RA), because it may guarantees a stable clinical course after attaining remission.Objectives:Impact of time span from initiation to achieving Boolean remission on maintaining disease activity, daily activities, and quality of life after attaining Boolean remission was investigated from daily clinical practice data.Methods:685 patients with RA since August 2010 under the T2T strategy were treated. They were monitored for their TJC, SJC, PGA, EGA, CRP, and disease activity indices such as CDAI, SDAI, DAS28, and Boolean criteria at every visit. HAQ-DI score, pain score using visual analog scale (PS-VAS), and EQ-5D were also monitored, and the quality of life score (QOLS) calculated from EQ-5D was determined at every visit from the time of diagnosis (baseline).Of 685 patients, 465 patients had achieved Boolean remission >1 times, and were consecutively followed up for >3 years. These patients were enrolled in the study. Time span from the first visit to first Boolean remission was calculated. The relationship between the time span and each of background parameters, and the relationship between the time span and each of the mean values of the SDAI score, HAQ score, PS-VAS, SHS, and QOLS at the first Boolean remission and thereafter was evaluated statistically.Patients were subsequently divided into the G ≤ 6 and G > 6 groups based on the achievement of first Boolean remission within two groups: time span G ≤ 6 months and G > 6 months. The two groups were compared with regard to the SDAI score, HAQ score, PS-VAS, SHS, and QOLS at first visit and at the time of first Boolean remission, and the mean values of these parameters after remission were evaluated statistically. Moreover, changes of these parameters and the mean Boolean remission rate after the first remission, and SDAI remission rate at the first Boolean remission to thereafter were compared between the two groups statistically.Results:Out of 465 patients, females comprised 343 (73.7%), and the mean age was 67.8 years (range, from 21–95 years). The mean disease duration at first visit was 6.1 years (range, from 1 months–45 years). The mean follow up length was 88.1 months (range: 36–122 months; median: 85 months) and mean time span from the first visit to the first Boolean remission was 8.1 months. The mean SDAI score, HAQ score, PS-VAS, and the QOLS at first visit were 13.3, 0.467, 33.2, and 0.834, respectively. Among the study parameters, PS-VAS and QOLS were significantly correlated with the time span. For parameters at the first Boolean remission, HAQ-DI score, PS-VAS, and QOLS demonstrated significant correlation with the time span, whereas SDAI, HAQ-DI score, PS-VAS, SHS, and QOLS after the Boolean remission demonstrated significant correlation with the time span.The comparison between the G ≤ 6 and the G > 6 groups revealed that the disease duration, HAQ score, and PS-VAS at baseline in the G > 6 were significantly higher than that in the G ≤ 6 group, and QOLS in the G ≤ 6 group was significantly higher than that in the G > 6 group at baseline. Similarly, the HAQ score and PS-VAS at the first Boolean remission in the G > 6 group were significantly higher than that in the G ≤ 6 group, whereas QOLS in the G ≤ 6 group demonstrated no significant difference compared with that in the G > 6 group.The mean value of the SDAI score after the first Boolean remission in the G > 6 group was significantly higher than that in the G ≤ 6 group. Similarly, the SDAI score, HAQ score, and PS-VAS after the first Boolean remission in the G > 6 group were also significantly higher than those in the G ≤ 6 group, and the mean value of the QOLS in the G ≤ 6 group were significantly higher than that in the G > 6 group. The Boolean remission rate and SDAI remission rate after the first Boolean remission were significantly higher in the G ≤ 6 group than those in the G > 6 group.Conclusion:Attaining Boolean remission ≤ 6 months for RA has significant benefit for more stable disease control, that leads good maintenance of ADL.Disclosure of Interests:None declared

Comparison of Emission Levels of Motor Cars, Motorcycles, and Tricycles Using Petrol Engines in Southwestern Nigeria

2021 ◽  
Vol 900 ◽  
pp. 183-187
Author(s):  
Odunlami Olayemi Abosede ◽  
Akeredolu Funso Alaba
Keyword(s):  
Carbon Dioxide ◽  
Carbon Monoxide ◽  
Carbon Dioxide Emissions ◽  
Mean Value ◽  
Southwestern Nigeria ◽  
Mean Values ◽  
Mobile Sources ◽  
Southwest Nigeria ◽  
The Mean ◽  
European Standards

The emissions of carbon monoxide, carbon dioxide, and hydrocarbon from four stroke-powered motorcars and two stroke-powered motorcycles and tricycles in Southwest Nigeria were examined using an automotive 4-gas analyer. Results show that tricycles produced more hydrocarbon and carbon monoxide emissions than motorcycles, while motorcycles emitted more of these pollutants than the gasoline fueled motor cars. (The gasoline fueled motorcars produced lowest hydrocarbon and carbon monoxide while the tricycles produced the highest hydrocarbon and carbon monoxide emissions). On the contrary, motor cars had the highest mean value of carbon dioxide followed by the motorcycles, while tricycles had the least. This could be attributed to the presence of the catalytic converters in some of the motor cars oxidizing carbon monoxide to carbon dioxide. The mean values of hydrocarbon, carbon monoxide and carbon dioxide emissions from motorcars are 630ppm, 10200ppm and 59900ppm. This is much higher than the NESREA (National Environmental standards and Regulations Enforcement Agency) standards as well as Euro II and Euro III (European standards) for vehicular emission. The mean values for hydrocarbon, carbon monoxide and carbon dioxide emissions from motorcycles and tricycles are (2150ppm, 21530ppm and 31200ppm) and (2820ppm, 24880ppm and 38710ppm) respectively. These results do not comply with Nigeria and European emission standards for hydrocarbon, and carbon monoxide. Tricycles and motorcycles account for higher concentrations of hydrocarbon and carbon monoxide pollutants from mobile sources, while they emit carbon dioxide minimally.

scholarly journals Lateral Antebrachial Cutaneous Nerve as a Donor Source for Digital Nerve Grafting: A Concept Revisited

2017 ◽  
Vol 11 (1) ◽  
pp. 1041-1048 ◽  
Author(s):  
Mehmet Bekir Unal ◽  
Kemal Gokkus ◽  
Evrim Sirin ◽  
Eren Cansü
Keyword(s):  
Pearson Correlation ◽  
Mean Value ◽  
Cutaneous Nerve ◽  
Digital Nerve ◽  
Mean Values ◽  
Nerve Grafts ◽  
The Mean ◽  
The Difference ◽  
Mean Time

Objective: The main objective of this study is to evaluate the availability of lateral antebrachial cutaneous nerve (LACN) autograft for acute or delayed repair of segmented digital nerve injuries. Patients and Methods: 13 digital nerve defects of 11 patients; treated with interposition of LACN graft that harvested from ipsilateral extremity were included in the study. Mean follow up period was 35, 7 months. The mean time from injury to grafting is 53, 3 days. The results of the mean 2PDT and SWMT values of injured /uninjured finger at the end of follow up period were evaluated with Paired T test. The correlation between the defect length and the difference of 2PDT, SWMT values between the uninjured and injured finger at the end of follow up period; were evaluated with Pearson - correlation analysis. Results: The mean value of our 2PDT and SWMT results are ~5,923, ~3, 52, respectively in which can be interpreted between the normal and diminished light touch. The defect length and difference percentage of SWMT values is positively and significantly correlated statistically. Mean length of interposed nerve grafts was 18.5 mm. The age of the patient and the mean values of 2PDT and SWMT with the difference % of 2PDT and % of SWMT are not statistically correlated. Conclusion: Based on results regarding sensory regaining at recipient side and negligible sensory deficit at harvesting side, we suggest that lateral antebrachial cutaneous nerve might be a valuable graft option for digital nerve defects.

Sign in / Sign up

Export Citation Format

Share Document