scholarly journals A hairpin DGS resonator for application to microstrip lowpass filters

2020 ◽  
Vol 71 (2) ◽  
pp. 110-115
Author(s):  
Rong-Bin Chen ◽  
Xiao-Ou Ou
Keyword(s):  
Numerical Simulations ◽  
Frequency Band ◽  
Unit Cell ◽  
Microwave Resonator ◽  
Lowpass Filter ◽  
Separation Angle ◽  
Wide Frequency Band ◽  
Unit Cells ◽  
Scale Ratio ◽  
Experimental Validations

AbstractA hairpin shaped DGS, consisting of two tilted slots with a separation angle, is studied as a unit cell in this contribution. It is further served as a microwave resonator for microstrip lowpass filter applications. Two prototype filters that respectively cascade the same unit cells and the scaled cells with a different scale ratio are analyzed. For demonstration purposes, the two prototype filters are optimally developed, fabricated and examined both from numerical simulations and from experimental validations. Results show the cascaded scaled type demonstrator features a high stopband suppression level within a wide frequency band.

scholarly journals Wideband Metamaterial Absorber Based on Combination of Unit Cells

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Puji Handayani ◽  
Gamantyo Hendrantoro ◽  
Eko Setijadi ◽  
Ahmad Mauludiyanto ◽  
Muhammad Rendy Anggara
Keyword(s):  
Frequency Band ◽  
Wide Band ◽  
Split Ring Resonator ◽  
Metamaterial Absorber ◽  
Simulation Software ◽  
Resonant Frequencies ◽  
Band Frequency ◽  
Wide Frequency Band ◽  
Unit Cells ◽  
Multiple Unit

Metamaterial absorber is an electromagnetic wave absorber made from metamaterial. It basically works in narrow band frequency as it is designed in a particular shape that related to its resonance frequency. However, some applications, e.g., anechoic chamber, require metamaterial absorber that can work in a wide frequency band. This paper discussed the design of wide band metamaterial absorber using the combination of multiple unit cells. The unit cells type was split ring resonator (SRR). SRR had advantages in terms of its simple shape, it could have more than one resonant frequencies depending on the number of its ring, and its shape could be modified easily to obtain the desired resonant frequencies. We designed metamaterial absorber having good absorbtion rate in 2-10 GHz frequency band. To cover this wide frequency band, we used five unit cells which were arranged on a flat plane. Each unit cell had several resonant frequencies. The design was carried out using simulation software of CST (Computer Simulation System). The fabricated design was measured and the results shown that it had an absorbtion rate of 99% in the measured frequency band.

Bayesian removal of noise for increased sensitivity in vector pattern recognition lattice imaging of interfaces

1993 ◽  
Vol 51 ◽  
pp. 994-995
Author(s):  
L. Fei ◽  
P. Fraundorf
Keyword(s):  
Pattern Recognition ◽  
Perfect Crystal ◽  
Unit Cell ◽  
Ion Milling ◽  
Beam Radiation ◽  
Major Interest ◽  
Unit Cells ◽  
Mapping Process ◽  
Increased Sensitivity ◽  
Electron Microscopes

Interface structure is of major interest in microscopy. With high resolution transmission electron microscopes (TEMs) and scanning probe microscopes, it is possible to reveal structure of interfaces in unit cells, in some cases with atomic resolution. A. Ourmazd et al. proposed quantifying such observations by using vector pattern recognition to map chemical composition changes across the interface in TEM images with unit cell resolution. The sensitivity of the mapping process, however, is limited by the repeatability of unit cell images of perfect crystal, and hence by the amount of delocalized noise, e.g. due to ion milling or beam radiation damage. Bayesian removal of noise, based on statistical inference, can be used to reduce the amount of non-periodic noise in images after acquisition. The basic principle of Bayesian phase-model background subtraction, according to our previous study, is that the optimum (rms error minimizing strategy) Fourier phases of the noise can be obtained provided the amplitudes of the noise is given, while the noise amplitude can often be estimated from the image itself.

scholarly journals Prediction of Effective Thermal Conductivities of Four-Directional Carbon/Carbon Composites by Unit Cells with Different Sizes

2021 ◽  
Vol 11 (3) ◽  
pp. 1171
Author(s):  
Chang Xu ◽  
Zhihong Sun ◽  
Guowei Shao
Keyword(s):  
Carbon Fiber ◽  
Longitudinal Direction ◽  
Unit Cell ◽  
Carbon Composites ◽  
Temperature Boundary ◽  
The Matrix ◽  
Unit Cells ◽  
Experimental Values ◽  
Different Diameters ◽  
Thermal Conductivities

Two-unit cells developed to predict the effective thermal conductivities of four-directional carbon/carbon composites with the finite element method are proposed in this paper. The smaller-size unit cell is formulated from the larger-size unit cell by two 180° rotational transformations. The temperature boundary conditions corresponding to the two-unit cells are derived, and the validity is verified by the temperature and heat flux distributions at specific positions of the larger-size unit cell and the smaller-size unit cell. The thermal conductivities of the carbon fiber bundles and carbon fiber rods are measured firstly. Then, combined with the properties of the matrix, the effective thermal conductivities of the four-directional carbon/carbon composites are numerically predicted. The results in transverse direction predicted by the larger-size unit cell and the smaller-size unit cell are both higher than experimental values, which are 5.8 to 6.2% and 7.3 to 8.2%, respectively. In longitudinal direction, the calculated thermal conductivities of the larger-size unit cell and the smaller-size unit cell are 6.8% and 6.2% higher than the experimental results, respectively. In addition, carbon fiber rods with different diameters are set to clarify the influence on the effective thermal conductivities of the four-directional carbon/carbon composites.

scholarly journals A numerical investigation on impulse-induced nonlinear longitudinal waves in pantographic beams

2021 ◽  
pp. 108128652110108
Author(s):  
Emilio Turco ◽  
Emilio Barchiesi ◽  
Francesco dell’Isola
Keyword(s):  
Numerical Simulations ◽  
Mechanical Response ◽  
Integration Scheme ◽  
Present Contribution ◽  
Longitudinal Waves ◽  
Deformation Regime ◽  
Impulsive Loads ◽  
Unit Cells ◽  
Statics And Dynamics ◽  
Equations Of Motions

This contribution presents the results of a campaign of numerical simulations aimed at better understanding the propagation of longitudinal waves in pantographic beams within the large-deformation regime. Initially, we recall the key features of a Lagrangian discrete spring model, which was introduced in previous works and that was tested extensively as capable of accurately forecasting the mechanical response of structures based on the pantographic motif, both in statics and dynamics. Successively, a stepwise integration scheme used to solve equations of motions is briefly discussed. The key content of the present contribution concerns the thorough presentation of some selected numerical simulations, which focus in particular on the propagation of stretch profiles induced by impulsive loads. The study takes into account different tests, by varying the number of unit cells, i.e., the total length of the system, spring stiffnesses, the shape of the impulse, as well as its properties such as duration and peak amplitude, and boundary conditions. Some conjectures about the form of traveling waves are formulated, to be confirmed by both further numerical simulations and analytical investigations.

scholarly journals A Multiband Antenna Stacked with Novel Metamaterial SCSRR and CSSRR for WiMAX/WLAN Applications

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 113
Author(s):  
Rajiv Mohan David ◽  
Mohammad Saadh AW ◽  
Tanweer Ali ◽  
Pradeep Kumar
Keyword(s):  
Split Ring Resonator ◽  
Unit Cell ◽  
Ring Resonators ◽  
Split Ring ◽  
Medium Theory ◽  
High Frequency Structure Simulator ◽  
Dimension Analysis ◽  
Unit Cells ◽  
Coaxial Feed ◽  
Triple Band

This paper presents an innovative method for the design of a triple band meta-mode antenna. This unique design of antenna finds application in a particular frequency band of WLAN and WiMAX. This antenna comprises of a square complimentary split ring resonator (SCSRR), a coaxial feed, and two symmetrical comb shaped split ring resonators (CSSRR). The metamaterial unit cell SCSRR independently gains control in the band range 3.15–3.25 GHz (WiMAX), whereas two symmetrical CSSRR unit cell controls the band in the ranges 3.91–4.01 GHz and 5.79–5.94 GHz (WLAN). This design methodology and the study of the suggested unit cells structure are reviewed in classical waveguide medium theory. The antenna has a miniaturized size of only 0.213λ0 × 0.192λ0 × 0.0271λ0 (20 × 18 × 2.54 mm3, where λ0 is the free space wavelength at 3.2 GHz). The detailed dimension analysis of the proposed antenna and its radiation efficiency are also presented in this paper. All the necessary simulations are carried out in High Frequency Structure Simulator (HFSS) 13.0 tool.

scholarly journals Dynamic crushing behavior of closed-cell aluminum foams based on different space-filling unit cells

2021 ◽  
Vol 21 (3) ◽  
Author(s):  
S. Talebi ◽  
R. Hedayati ◽  
M. Sadighi
Keyword(s):  
Surface Area ◽  
Dynamic Behavior ◽  
Energy Absorption ◽  
Peak Stress ◽  
Absorption Capacity ◽  
Unit Cell ◽  
Lattice Structures ◽  
Energy Absorption Capacity ◽  
Closed Cell ◽  
Unit Cells

AbstractClosed-cell metal foams are cellular solids that show unique properties such as high strength to weight ratio, high energy absorption capacity, and low thermal conductivity. Due to being computation and cost effective, modeling the behavior of closed-cell foams using regular unit cells has attracted a lot of attention in this regard. Recent developments in additive manufacturing techniques which have made the production of rationally designed porous structures feasible has also contributed to recent increasing interest in studying the mechanical behavior of regular lattice structures. In this study, five different topologies namely Kelvin, Weaire–Phelan, rhombicuboctahedron, octahedral, and truncated cube are considered for constructing lattice structures. The effects of foam density and impact velocity on the stress–strain curves, first peak stress, and energy absorption capacity are investigated. The results showed that unit cell topology has a very significant effect on the stiffness, first peak stress, failure mode, and energy absorption capacity. Among all the unit cell types, the Kelvin unit cell demonstrated the most similar behavior to experimental test results. The Weaire–Phelan unit cell, while showing promising results in low and medium densities, demonstrated unstable behavior at high impact velocity. The lattice structures with high fractions of vertical walls (truncated cube and rhombicuboctahedron) showed higher stiffness and first peak stress values as compared to lattice structures with high ratio of oblique walls (Weaire–Phelan and Kelvin). However, as for the energy absorption capacity, other factors were important. The lattice structures with high cell wall surface area had higher energy absorption capacities as compared to lattice structures with low surface area. The results of this study are not only beneficial in determining the proper unit cell type in numerical modeling of dynamic behavior of closed-cell foams, but they are also advantageous in studying the dynamic behavior of additively manufactured lattice structures with different topologies.

The Influence of Multiple Inclusions on the Cauchy Stress of a Spherical Particle-Reinforced Composite Under Uniaxial Loading

2014 ◽  
Author(s):  
Ke Niu ◽  
Armin Abedini ◽  
Zengtao Chen
Keyword(s):  
Spherical Particle ◽  
Single Particle ◽  
Volume Fraction ◽  
Unit Cell ◽  
Spherical Particles ◽  
Uniaxial Tensile ◽  
Cauchy Stress ◽  
Particle Volume ◽  
Volume Fractions ◽  
Unit Cells

This paper investigates the influence of multiple inclusions on the Cauchy stress of a spherical particle-reinforced metal matrix composite (MMC) under uniaxial tensile loading condition. The approach of three-dimensional cubic multi-particle unit cell is used to investigate the 15 non-overlapping identical spherical particles which are randomly distributed in the unit cell. The coordinates of the center of each particle are calculated by using the Random Sequential Adsorption algorithm (RSA) to ensure its periodicity. The models with reinforcement volume fractions of 10%, 15%, 20% and 25% are evaluated by using the finite element method. The behaviour of Cauchy stress for each model is analyzed at a far-field strain of 5%. For each reinforcement volume fraction, four models with different particle spatial distributions are evaluated and averaged to achieve a more accurate result. At the same time, single-particle unit cell and analytical model were developed. The stress-strain curves of multi-particle unit cells are compared with single-particle unit cells and the tangent homogenization model coupled with the Mori-Tanaka method. Only little scatters were found between unit cells with the same particle volume fractions. Multi-particle unit cells predict higher response than single particle unit cells. As the volume fraction of reinforcements increases, the Cauchy stress of MMCs increases.

Determination of Optimal Unit-Cell Size of Homogeneous Conformal Unit-Cell Lattice Structure Using Solid Shape Matching

2016 ◽  
Author(s):  
Mahmoud A. Alzahrani ◽  
Seung-Kyum Choi
Keyword(s):  
Cell Size ◽  
Solid Body ◽  
Strain Energy ◽  
Lattice Structure ◽  
Weight Ratio ◽  
Unit Cell ◽  
Optimal Size ◽  
Lattice Structures ◽  
Unit Cell Size ◽  
Unit Cells

With rapid developments and advances in additive manufacturing technology, lattice structures have gained considerable attention. Lattice structures are capable of providing parts with a high strength to weight ratio. Most work done to reduce computational complexity is concerned with determining the optimal size of each strut within the lattice unit-cells but not with the size of the unit-cell itself. The objective of this paper is to develop a method to determine the optimal unit-cell size for homogenous periodic and conformal lattice structures based on the strain energy of a given structure. The method utilizes solid body finite element analysis (FEA) of a solid counter-part with a similar shape as the desired lattice structure. The displacement vector of the lattice structure is then matched to the solid body FEA displacement results to predict the structure’s strain energy. This process significantly reduces the computational costs of determining the optimal size of the unit cell since it eliminates FEA on the actual lattice structure. Furthermore, the method can provide the measurement of relative performances from different types of unit-cells. The developed examples clearly demonstrate how we can determine the optimal size of the unit-cell based on the strain energy. Moreover, the computational cost efficacy is also clearly demonstrated through comparison with the FEA and the proposed method.

Material Behavior of 2D Steel Lattices with Different Unit-Cell Patterns

2021 ◽  
Vol 1046 ◽  
pp. 15-21
Author(s):  
Paiboon Limpitipanich ◽  
Pana Suttakul ◽  
Yuttana Mona ◽  
Thongchai Fongsamootr
Keyword(s):  
Elastic Modulus ◽  
Experimental Studies ◽  
Base Material ◽  
Unit Cell ◽  
Material Behavior ◽  
Closed Form Solutions ◽  
The Past ◽  
Weight Density ◽  
Unit Cells ◽  
Cell Patterns

Over the past years, two-dimensional lattices have attracted the attention of several researchers because they are lightweight compared with their full-solid counterparts, which can be used in various engineering applications. Nevertheless, since lattices are manufactured by reducing the base material, their stiffnesses then become lower. This study presents the weight efficiency of the lattices defined by relations between the elastic modulus and the weight density of the lattices. In this study, the mechanical behavior of 2D lattices is described by the in-plane elastic modulus. Experimental studies on the elastic modulus of the 2D lattices made of steel are performed. Three lattices having different unit cells, including square, body-centered, and triangular unit cells, are considered. The elastic modulus of each lattice is investigated by tensile testing. All specimens of the lattices are made of steel and manufactured by waterjet cutting. The experimental results of the elastic modulus of the lattices with the considered unit-cell patterns are validated with those obtained from finite element simulations. The results obtained in this study are also compared with the closed-form solutions founded in the literature. Moreover, the unit-cell pattern yielding the best elastic modulus for the lattice is discussed through weight efficiency.

Sign in / Sign up

Export Citation Format

Share Document