scholarly journals Study on Hydrodynamic Configuration Parameters of Vertical-Axis Tidal Turbine

2020 ◽  
Vol 27 (1) ◽  
pp. 116-125
Author(s):  
Li Guangnian ◽  
Qingren Chen ◽  
Yue Liu ◽  
Shanqiang Zhu ◽  
Qun Yu
Keyword(s):  
Vertical Axis ◽  
Hydrodynamic Performance ◽  
Numerical Code ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Variation Principle ◽  
Tip Speed Ratio ◽  
Tidal Turbines ◽  
Tidal Turbine ◽  
Vertical Axis Tidal Turbine

AbstractIn this paper, a numerical code for predicting the hydrodynamic performance of vertical-axis tidal turbine array is developed. The effect of the tip speed ratio, solidity, and preset angle on the hydrodynamic performance are discussed using a series of calculations. The load principle of the rotor and the variation principle of the turbine power coefficient are studied. All these results can be considered as a reference for the design of vertical-axis tidal turbines.

6-DOF Numerical Simulation of the Vertical-Axis Water Turbine

2011 ◽  
Author(s):  
Xin Wang ◽  
Xianwu Luo ◽  
Baotang Zhuang ◽  
Weiping Yu ◽  
Hongyuan Xu
Keyword(s):  
Vertical Axis ◽  
Hydrodynamic Performance ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Test Model ◽  
Tip Speed Ratio ◽  
Water Turbine ◽  
Tidal Stream ◽  
Static Head ◽  
Tidal Stream Turbine

Recent years, the vertical-axis water turbine (VAWT) is widely used for converting the kinetic energy of the moving water in open flow and with low static head like river and tidal sites. Conventional numerical methods such as disk-stream tube method and vortex panel method have some drawbacks to predict the behaviors and characteristics of the vertical-axis tidal stream turbine. This paper had treated the hydrodynamic performance of a VAWT model experimentally and numerically. Based on the present research, a 6-DOF method coupled with CFD suitable to simulate the rotor movement and predict the hydraulic performance for a VAWT was proposed. Compared with the experiments, the numerical results for the performance of the VAWT model were reasonable. It is also noted that there is a maximum power coefficient near tip speed ratio of 2.5 for the test model.

scholarly journals An Unsteady Boundary Element Model for Hydrodynamic Performance of a Multi-Blade Vertical-Axis Tidal Turbine

Water ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 1413 ◽  
Author(s):  
Guangnian Li ◽  
Qingren Chen ◽  
Hanbin Gu
Keyword(s):  
Boundary Element ◽  
Numerical Solutions ◽  
Vertical Axis ◽  
Element Model ◽  
Hydrodynamic Performance ◽  
Design And Optimization ◽  
Tidal Turbines ◽  
Proposed Model ◽  
Tidal Turbine ◽  
Vertical Axis Tidal Turbine

An unsteady boundary element model is developed to simulate the unsteady flow induced by the motion of a multi-blade vertical axis turbine. The distribution of the sources, bound vortices and wake vortices of the blades are given in detail. In addition, to make the numerical solution more robust, the Kutta condition is also introduced. The developed model is used to predict the hydrodynamic performance of a vertical axis tidal turbine and is validated by comparison with experimental data and other numerical solutions available in the literature. Good agreement is achieved and the calculation of the proposed model is simpler and more efficient than prior numerical solutions. The proposed model shows its capability for future profile design and optimization of vertical axis tidal turbines.

scholarly journals Study of Hydrodynamic Interference of Vertical-Axis Tidal Turbine Array

Water ◽  
2018 ◽  
Vol 10 (9) ◽  
pp. 1228
Author(s):  
Guangnian Li ◽  
Qingren Chen ◽  
Hanbin Gu
Keyword(s):  
Vertical Axis ◽  
Tidal Energy ◽  
Element Model ◽  
Hydrodynamic Performance ◽  
Maximum Efficiency ◽  
Hydrodynamic Characteristics ◽  
Tidal Turbines ◽  
Tidal Turbine ◽  
Vertical Axis Turbine ◽  
Vertical Axis Tidal Turbine

The hydrodynamic interference between tidal turbines must be considered when predicting their overall hydrodynamic performance and optimizing the layout of the turbine array. These factors are of great significance to the development and application of tidal energy. In this paper, the phenomenon of hydrodynamic interference of the tidal turbine array is studied by the hydrodynamic performance forecast program based on an unsteady boundary element model for the vertical-axis turbine array. By changing the relative positions of two turbines in the double turbine array to simulate the arrangement of different turbines, the hydrodynamic interference law between the turbines in the array and the influence of relative positions on the hydrodynamic characteristics in the turbine array are explored. The manner in which the turbines impact each other, the degree of influence, and rules for turbine array arrangement for maximum efficiency of the array will be discussed. The results of this study will provide technical insights to relevant researchers.

Numerical Research on the Characteristics of Lift-Drag Type Vertical Axis Wind Turbine

2012 ◽  
Vol 189 ◽  
pp. 448-452
Author(s):  
Yan Jun Chen ◽  
Guo Qing Wu ◽  
Yang Cao ◽  
Dian Gui Huang ◽  
Qin Wang ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Chord Length ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Tip Speed Ratio ◽  
Middle Range ◽  
Parabolic Form ◽  
Cfd Method

Numerical studies are conducted to research the performance of a kind of lift-drag type vertical axis wind turbine (VAWT) affected by solidity with the CFD method. Moving mesh technique is used to construct the model. The Spalart-Allmaras one equation turbulent model and the implicit coupled algorithm based on pressure are selected to solve the transient equations. In this research, how the tip speed ratio and the solidity of blade affect the power coefficient (Cp) of the small H-VAWT is analyzed. The results indicate that Cp curves exhibit approximate parabolic form with its maximum in the middle range of tip speed ratio. The two-blade wind turbine has the lowest Cp while the three-blade one is more powerful and the four-blade one brings the highest power. With the certain number of blades, there is a best chord length, and too long or too short chord length may reduce the Cp.

scholarly journals Wake of a Ducted Vertical Axis Tidal Turbine in Turbulent Flows, LBM Actuator-Line Approach

Energies ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 4273 ◽  
Author(s):  
Mikaël Grondeau ◽  
Sylvain Guillou ◽  
Philippe Mercier ◽  
Emmanuel Poizot
Keyword(s):  
Turbulent Flows ◽  
Vertical Axis ◽  
Tidal Currents ◽  
Eddy Simulation ◽  
Tidal Turbines ◽  
Tidal Turbine ◽  
Vertical Axis Tidal Turbine ◽  
Ambient Turbulence ◽  
The Cost ◽  
Boltzmann Method

Vertical axis tidal turbines are devices that extract the kinetic energy from tidal currents. Tidal currents can be highly turbulent. Since ambient turbulence affects the turbine hydrodynamic, it is critical to understand its influence in order to optimize tidal farms. Actuator Line Model (ALM) combined with Large Eddy Simulation (LES) is a promising way to comprehend this phenomenon. In this article, an ALM was implemented into a Lattice Boltzmann Method (LBM) LES solver. This implementation gives good results for predicting the wake of a vertical axis tidal turbine placed into a turbulent boundary layer. The validated numerical configuration was then used to compute the wake of a real size ducted vertical axis tidal turbine. Several upstream turbulence rates were simulated. It was found that the shape of the wake is strongly influenced by the ambient turbulence. The cost-to-precision ratio of ALM-LBM-LES compared to fully resolved LBM-LES makes it a promising way of modeling tidal farms.

Numerical Modeling of Vertical Axis Wind Turbines

2014 ◽  
Author(s):  
Teresa Parra-Santos ◽  
Armando Gallegos-Muñoz ◽  
Miguel A. Rodriguez-Beneite ◽  
Cristobal Uzarraga-Rodriguez ◽  
Francisco Castro-Ruiz
Keyword(s):  
Mechanical Energy ◽  
Vertical Axis ◽  
The Self ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Tip Speed Ratio ◽  
Vertical Axis Wind Turbines ◽  
Selection Of ◽  
Rotor Axis

This paper aims to predict the performance of Vertical Axis Wind Turbine (VAWT), hence the modeling of kinetic energy extraction from wind and its conversion to mechanical energy at the rotor axis, is carried out. The H-type Darrieus turbine consists of three straight blades with shape of aerofoil attached to a rotating vertical shaft. The criterion on the selection of this kind of turbines, despite its reduced efficiency, is the easy manufacture in workshops. A parametric study has been carried out to analyze the camber effect on the non dimensional curves of power coefficient so that the self starting features as well as the range of tip speed ratio of operation could be predicted.

scholarly journals An Actuator Disc Analysis of a Ducted High-Solidity Tidal Turbine in Yawed Flow

2019 ◽  
Author(s):  
Mitchell G. Borg ◽  
Qing Xiao ◽  
Atilla Incecik ◽  
Steven Allsop ◽  
Christophe Peyrard
Keyword(s):  
Fluid Dynamic ◽  
Computational Fluid Dynamic Model ◽  
Hydrodynamic Performance ◽  
Speed Ratio ◽  
Angular Range ◽  
Power Development ◽  
Tip Speed Ratio ◽  
Power Increase ◽  
Actuator Disc ◽  
Tidal Turbine

Abstract This work elaborates a computational fluid dynamic model utilised in the investigation of the hydrodynamic performance concerning a ducted high-solidity tidal turbine in yawed inlet flows. Analysing the performance at distinct bearing angles with the axis of the turbine, increases in torque and mechanical rotational power were acknowledged to be induced within a limited angular range at distinct tip-speed ratio values. Through multiple yaw iterations, the peak attainment was found to fall between bearing angles of 15° and 30°, resulting in a maximum power increase of 3.22%, together with an extension of power development to higher tip-speed ratios. In confirmation, these outcomes were subsequently analysed by means of actuator disc theory, attaining a distinguishable relationship with blade-integrated outcomes.

scholarly journals 3D Simulation with Flow-Induced Rotation for Non-Deformable Tidal Turbines

2021 ◽  
Vol 9 (3) ◽  
pp. 250
Author(s):  
Ilan Robin ◽  
Anne-Claire Bennis ◽  
Jean-Claude Dauvin
Keyword(s):  
Vertical Axis ◽  
Tidal Energy ◽  
Fluid Structure Interactions ◽  
Good Correspondence ◽  
Tidal Turbines ◽  
Tidal Turbine ◽  
Correct Direction ◽  
Convergence Study ◽  
Vertical Axis Tidal Turbine ◽  
Mesh Convergence

The overall potential for recoverable tidal energy depends partly on the tidal turbine technologies used. One of problematic points is the minimum flow velocity required to set the rotor into motion. The novelty of the paper is the setup of an innovative method to model the fluid–structure interactions on tidal turbines. The first part of this work aimed at validating the numerical model for classical cases of rotation (forced rotation), in particular, with the help of a mesh convergence study. Once the model was independent from the mesh, the numerical results were tested against experimental data for both vertical and horizontal tidal turbines. The results show that a good correspondence for power and drag coefficients was observed. In the wake, the vortexes were well captured. Then, the fluid drive code was implemented. The results correspond to the expected physical behavior. Both turbines rotated in the correct direction with a coherent acceleration. This study shows the fundamental operating differences between a horizontal and a vertical axis tidal turbine. The lack of experiments with the free rotation speed of the tidal turbines is a limitation, and a digital brake could be implemented to overcome this difficulty.

scholarly journals Studi simulasi penggunaan airfoil naca 6412 sebagai sudu pada turbin angin crossflow melalui pemodelan CFD 2 dimensi

2018 ◽  
Vol 13 (1) ◽  
pp. 28
Author(s):  
Muhammad Ivan Fadhil Hendrawan ◽  
Dominicus Danardono ◽  
Syamsul Hadi
Keyword(s):  
Wind Turbine ◽  
Constant Velocity ◽  
Cross Flow ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Ansys Fluent ◽  
Tip Speed Ratio ◽  
Blade Number

AbstractThe simulation aimed to understand the effect of the angle of blade number and blade number of vertical axis wind turbine with cross flow runner to enhance the performance of wind turbine. The turbine had 20, 22, and 24 number of blades. Simulation was done in 2D analysis using ANSYS-Fluent. Tip speed ratio was varied in range of 0,1-0,5 with constant velocity inlet 2 m/s. The effect of blade numbers to torque and power coefficient were analyzed and compared. It had been found that the best power coefficient were 0,5 at tip speed ratio 0,3.

scholarly journals Studi Eksperimen Pengaruh Jumlah Sudu Terhadap Kinerja Wind Turbine Crossflow

2021 ◽  
Vol 16 (2) ◽  
pp. 218
Author(s):  
Fahrudin Fahrudin ◽  
Fitri Wahyuni ◽  
Dini Oktavitasari
Keyword(s):  
Wind Turbine ◽  
Alternative Energy ◽  
Wind Tunnel Test ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Test Scheme ◽  
Vertical Axis Wind Turbine ◽  
Tip Speed Ratio ◽  
Torque Coefficient

<p>Wind is an alternative energy that is environmentally friendly and sustainable. Therefore, we need a type of wind turbine that can receive wind from all directions. The crossflow type vertical axis wind turbine has a high torque coefficient at a low tip speed ratio. The purpose of this study was to determine the effect of the number of blades on the performance of the vertical axis crossflow wind turbine. The experimental test was carried out by varying the number of blades. The configuration is analyzed using the experimental wind tunnel test scheme which has been modified in the section test section. The results showed that the number of blades 16 has a power coefficient ( ) = 0.23 tip speed ratio (TSR) = 0.42 at a wind speed of 4 m / s.</p><p><strong><br /></strong></p>

Sign in / Sign up

Export Citation Format

Share Document