Informal Recycling In Developing Nations

2016 ◽  
Author(s):  
Amanda Hart
Keyword(s):  
Life Span ◽  
Social Economic ◽  
Developing Nations ◽  
Profit Margin ◽  
Health Issues ◽  
Informal Recycling ◽  
Pig Farms ◽  
Environmental And Health Issues ◽  
Cost Of Production ◽  
The Cost

The topic of my research is informal recycling with a focus on developing nations. Scavengers are considered people who sort through garbage but not through an organization. There is a negative stigma that is associated with this type of lifestyle. The discussion will explore the benefits of organized informal recycling programs in countries such as Brazil and Nigeria. When informal recycling becomes organized jobs are created allowing for more residents to become employed. Some of the benefits of informal recycling include reducing the volume of waste, the life span of disposal sites is increased as well it helps reduce the amount of methane produced. These programs also allow for certain materials to be discovered which can easily be reused. For example, there are metals that can be sorted through and ultimately sold to companies. Another example would be the organics from the garbage are used in order to support pig farms. This decreases the cost of production for the pig farmers, which allows them a larger profit margin. Also, social, economic, environmental and health issues will be discussed in further detail. Finally, terms will be defined to allow a better understanding of the informal recycling world and how it operates.

scholarly journals Constraint and opportunity of raw jute production : A case study of eastern Terai, Nepal

2013 ◽  
Vol 3 ◽  
pp. 117-122 ◽  
Author(s):  
TB Ghimire ◽  
NS Thakur
Keyword(s):  
Production Cost ◽  
Cost Effective ◽  
Profit Margin ◽  
Yield Potential ◽  
High Yield ◽  
Climate Change Effect ◽  
Cost Of Production ◽  
Sowing Period ◽  
The Cost ◽  
High Yield Potential

Area and production of raw jute has decreased, though there is a high demand of raw jute in the country. In order to assess production constraints, a survey was carried out in 2005/06 in Jhapa, Morang and Sunsari districts. The study revealed that unstable or low price of raw jute, unavailability of quality jute seed, limited irrigation water at sowing period, diseases complex (wilt), labor shortage during peak season, weed problem, lack of retting water/retting pond were the main constraints in jute production and processing. The study indicates that the maximum production cost has involved in fiber extraction (16.9%) and weeding (16.33%). Jute productivity ranged from 1788 to 2260 kg per hectare. JRO-524 variety of jute has been widely grown across the region due to its wider adaptability, high yield potential and quality fiber. Jute area has been replaced by sugarcane due to its high yield potential and high profit margin. It is observed that the cost of production of jute is high as compared to other crops in the season. Average cost of production of fiber was estimated to be Rs.1563/quintal. For the promotion of jute cultivation in the eastern Terai, it would be better to provide subsidies on seeds and fertilizer to jute growers as practiced in neighboring countries thereby profit margin becomes high and will encourage growers in producing more raw jute within the country for the fulfillment of raw jute requirement of local jute industries. Cost effective technologies have to be developed in jute production and processing aspects for lowering the production cost and increasing the profit margin. Popular genotypes JRO- 524 which was widely adopted needs to be recommended officially for the general cultivation in this region. Being an eco-friendly crop, promotion is required to adapt climate change effect and maintaining the soil properties in jute growing areas. Agronomy Journal of Nepal (Agron JN) Vol. 3. 2013, Page 117-122 DOI: http://dx.doi.org/10.3126/ajn.v3i0.9013

Foreword

Livestock ◽  
2021 ◽  
Vol 26 (3) ◽  
pp. 135-135
Author(s):  
John Carr
Keyword(s):  
Mycoplasma Hyopneumoniae ◽  
Food Crisis ◽  
Health Issues ◽  
Traditional Health ◽  
High Feed ◽  
Cost Of Production ◽  
Feed Costs ◽  
The Cost

In the current food crisis with high feed costs, especially related to protein sources and soya in particular, this is destablising any profitability in the pig industry. At this stage we must reduce the cost of production to survive. Feed is the major cost of production and in this supplement, we look at areas where veterinarians can play a major role on our client's farm by helping to reduce feed wastage. The supplement explores traditional health issues with Mycoplasma hyopneumoniae and the enormous role of vaccination in controlling this long-term scourge. With vaccination in mind, we also explore the most important vaccine in pig production — the PCV2 vaccine. There is a new circovirus around, PCV3, and the paper looks at its possible involvement in the cost of production and its impacts on pig reproduction.

IMPLEMENTASI JOB ORDER COSTING METHOD DALAM PERHITUNGAN HARGA POKOK PRODUKSI MAP

2018 ◽  
Vol 4 (2) ◽  
pp. 43-55
Author(s):  
Ika Yulianti ◽  
Endah Masrunik ◽  
Anam Miftakhul Huda ◽  
Diana Elvianita
Keyword(s):  
Production Process ◽  
Quantitative Data ◽  
Production Cost ◽  
Qualitative Data ◽  
Cost Data ◽  
Method Calculation ◽  
Cost Of Production ◽  
The Right ◽  
The Cost

This study aims to find a comparison of the calculation of the cost of goods manufactured in the CV. Mitra Setia Blitar uses the company's method and uses the Job Order Costing (JOC) method. The method used in this study is quantitative. The types of data used are quantitative and qualitative. Quantitative data is in the form of map production cost data while qualitative data is in the form of information about map production process. The result of calculating the cost of production of the map between the two methods results in a difference of Rp. 306. Calculation using the company method is more expensive than using the Job Order Costing method. Calculation of cost of goods manufactured using the company method is Rp. 2,205,000, - or Rp. 2,205, - each unit. While using the Job Order Costing (JOC) method is Rp. 1,899,000, - or Rp 1,899, - each unit. So that the right method used in calculating the cost of production is the Job Order Costing (JOC) method

ANALISIS PERHITUNGAN HARGA POKOK PRODUKSI DAN PENENTUAN HARGA JUAL ATAS PRODUK (Studi Kasus Pada PT Dasa Windu Agung)

2016 ◽  
Vol 1 (2) ◽  
pp. 183-190
Author(s):  
Dwi Urip Wardoyo
Keyword(s):  
Manufacturing Industry ◽  
Sampling Method ◽  
Manufacturing Companies ◽  
Test Analysis ◽  
Automotive Components ◽  
Convenience Sampling ◽  
Cost Of Production ◽  
The Cost ◽  
Keywords Cost

This study aims to determine the determination of the cost of production for products produced by PT. DWA. The Company is engaged in the manufacturing industry specialized in automotive components. Its activity is carried out through a series of production processes, so that expenses spent in the production will be calculated into the cost of the production sold. The population in this study were all manufacturing companies in Jakarta. Convenience sampling method selected one of the companies that get the confidence to assemble three national car project in Indonesia, namely Timor, Bakrie and Maleo. Test analysis used in this study is to test the calculation of full costing with job order costing. This study shows that (a) determination of the cost elements associated with the cost of production and (b) determining the cost of production on a product-based job costing with full costing approach. Keywords: cost of production, full costing

scholarly journals 13.D. Workshop: SDGs in the focus of environmental and health issues

2020 ◽  
Vol 30 (Supplement_5) ◽  
Author(s):  
◽  
Keyword(s):  
Public Health ◽  
Climate Change ◽  
Sustainable Development ◽  
Community Engagement ◽  
Health Professionals ◽  
Health Issues ◽  
The Sustainable Development ◽  
The World ◽  
Environmental And Health Issues ◽  
The Impact

Abstract This workshop is dedicated on SDGs in the focus of environmental and health issues, as very important and actual topic. One of the characteristics of today's societies is the significant availability of modern technologies. Over 5 billion (about 67%) people have a cellphone today. More than 4.5 billion people worldwide use the Internet, close to 60% of the total population. At the same time, one third of the people in the world does not have access to safe drinking water and half of the population does not have access to safe sanitation. The WHO at UN warns of severe inequalities in access to water and hygiene. Air, essential to life, is a leading risk due to ubiquitous pollution and contributes to the global disease burden (7 million deaths per year). Air pollution is a consequence of traffic and industry, but also of demographic trends and other human activities. Food availability reflects global inequality, famine eradication being one of the SDGs. The WHO warns of the urgency. As technology progresses, social inequality grows, the gap widens, and the environment continues to suffer. Furthermore, the social environment in societies is “ruffled” and does not appear to be beneficial toward well-being. New inequalities are emerging in the availability of technology, climate change, education. The achievement reports on the Sustainable Development Goals (SDGs), also point out to the need of reviewing individual indicators. According to the Sustainable Development Agenda, one of the goals is to reduce inequalities, and environmental health is faced by several specific goals. The Global Burden of Disease is the most comprehensive effort to date to measure epidemiological levels and trends worldwide. It is the product of a global research collaborative and quantifies the impact of hundreds of diseases, injuries, and risk factors in countries around the world. This workshop will also discuss Urban Health as a Complex System in the light of SDGs. Climate Change, Public Health impacts and the role of the new digital technologies is also important topic which is contributing to SDG3, improving health, to SDG4, allowing to provide distance health education at relatively low cost and to SDG 13, by reducing the CO2 footprint. Community Engagement can both empower vulnerable populations (so reducing inequalities) and identify the prior environmental issues to be addressed. The aim was to search for public health programs using Community Engagement tools in healthy environment building towards achievement of SDGs. Key messages Health professionals are involved in the overall process of transformation necessary to achieve the SDGs. Health professionals should be proactive and contribute to the transformation leading to better health for the environment, and thus for the human population.

The Engineering Design of Helical Spur Gear Transmission with Single Gear Pair for Electric Scooter

2015 ◽  
Vol 764-765 ◽  
pp. 374-378 ◽  
Author(s):  
Long Chang Hsieh ◽  
Tzu Hsia Chen ◽  
Hsiu Chen Tang
Keyword(s):  
Engineering Design ◽  
Spur Gear ◽  
Gear Transmission ◽  
Reduction Ratio ◽  
Gear Pair ◽  
Engineering Drawing ◽  
Electric Scooter ◽  
High Reduction ◽  
Cost Of Production ◽  
The Cost

Traditionally, the reduction ratio of a spur gear pair is limited to 4 ~ 7. For a spur gear transmission with reduction ratio more than 7, it is necessary to have more than two gear pairs. Consider the cost of production, this paper proposes a helical spur gear reducer with one gear pair having reduction ratio 19.25 to substitute the gear reducer with two gear pairs. Based on the involute theorem, the gear data of helical spur gear pair is obtained. According to the gear data, its corresponding engineering drawing is accomplished. This manuscript verify that one spur gear pair also can have high reduction ratio (20 ~ 30).

The Cost of Production of Giant Clam Seed Tridacna gigas

1993 ◽  
Vol 24 (3) ◽  
pp. 352-360 ◽  
Author(s):  
Clement A. Tisdell ◽  
William R. Thomas ◽  
Luca Tacconi ◽  
John S. Lucas
Keyword(s):  
Giant Clam ◽  
Cost Of Production ◽  
Tridacna Gigas ◽  
The Cost

Letter to the Editor

PEDIATRICS ◽  
1994 ◽  
Vol 93 (1) ◽  
pp. 151-152
Author(s):  
Caroline Breese Hall ◽  
Harold S. Margolis
Keyword(s):  
Public Health ◽  
Private Practice ◽  
Clinton Administration ◽  
Health Issues ◽  
Childhood Immunization ◽  
Letter To The Editor ◽  
The Many ◽  
The Cost

We appreciate the concerned letter of Dr Jacobs and his thoughtful questions arising both from his knowledge of the recommendations and public health issues, as well as those of private practice. The cost of vaccines is an issue with which we must all be concerned. By highlighting the importance of childhood immunization the Clinton administration has engendered interest and, thus, optimism that efforts toward reducing the cost will be successful. However, we should remember that the many excellent studies that have analyzed the reasons why children are not being vaccinated have shown that cost is not the major factor, but access, difficulties, and obstacles, real and perceived, to obtaining immunizations are.

PROBLEMS OF ORE PREPARATION FOR HEAP LEACHING

2021 ◽  
Vol 4 (1) ◽  
pp. 322-330
Author(s):  
V.I. Golik ◽  
Keyword(s):  
High Speed ◽  
Heap Leaching ◽  
Ore Preparation ◽  
Cost Of Production ◽  
The Cost

The issues of reagent leaching of metals in stacks in a historical cut are considered. It is shown that more than 1/3 of the chipped ore in size does not meet the conditions for extract-ing metals from it and requires regrinding. The features of mills are considered and the ad-vantages of grinding in a high-speed mill - disintegrator are determined. The information on innovations in the optimization of grinding equipment, which can reduce the cost of production by 10…15 %, is given.

Sign in / Sign up

Export Citation Format

Share Document