scholarly journals Analisis Risiko Postur Kerja pada Pengoperasian Mesin Pengolah Sampah Plastik Creatics

Jurnal METRIS ◽  
2021 ◽  
Vol 22 (01) ◽  
pp. 21-26
Author(s):  
Aprilia Tri Purwandari

Ketidaknyamanan dalam postur kerja dapat mengakibatkan berbagai permasalahan dalam bekerja. Musculoskeletal Disorders (MSDs) atau gangguan pada otot, sendi dan sistem syaraf merupakan permasalahan yang paling banyak terjadi akibat bekerja. Hal tersebut dapat mendatangkan kerugian, baik bagi pekerja maupun perusahaan. Salah satu penyebab musculoskeletal disorders adalah postur kerja yang tidak ergonomis yang dapat membahayakan keselamatan dan kesehatan pekerja. Tujuan penelitian ini adalah menganalisis postur kerja dalam mengoperasikan mesin pengolah sampah terintegrasi Creatics. Metode yang digunakan adalah adalah penyeberan kuesioner Nordic Body Map (NBM) untuk mendeteksi keluhan sakit pada bagian tubuh pekerja dan metode observasi Ovako Working Postures Analysis System (OWAS) untuk mendukung hasil kusioner NBM untuk menentukan risiko bahaya dari postur kerja. Hasil yang diperoleh adalah responden mengalami keluhan sakit pada kaki, lutut, paha, lengan, pinggang, lengan atas kanan, lengan bawah kanan, bahu kanan dan pinggang. Hal ini didukung oleh hasil penilaian dengan OWAS yang menunjukkan postur kerja masuk dalam kategori dua, yaitu berbahaya dan perlu perbaikan pada rancangan mesin Creatics di masa yang akan datang.


Author(s):  
Mufidha Khoirul Umami

Introduction: Musculoskeletal disorders occur due to various factors: main factors, such as extortion of the muscles, repetitive activities, non-ergonomic working postures; secondary factors (pressure, vibrant, microclimate), and individual factors (age, years of service, sex, nutritional status, physical endurance, smoking habits, physical strength and anthropometry). The workers in the Injection Department at PT. ARPS mostly work with non-ergonomic working postures. The aim of this study is to analyze the correlation between age, nutritional status, and working postures and the complaints on musculoskeletal disorders among the workers in the Injection department at PT. ARPS. Metods: This study applies analytic observational method with a cross-sectional design. The sample is chosen by implementing simple random sampling with a total of 52 respondents. The data collection to measure the ratio risk level of the working postures of the injection workers is completed by using Rapid Upper Limb Assessment (RULA) measurement method, while Nordic Body Map (NBM) questionnaire form is used to measure risk level of the disorder, and anthropometry measurement is applied to evaluate the nutritional status of the workers, such as their height and weight. The data are analyzed using Spearman Rho’s Correlation (significance level α = 5%). Results: The percentage of injection workers are <35 years old (76.9%), have normal nutritional status (59.6%), 27 workers (51.9%) have low musculoskeletal disorders and 19 others (36.5%) have low-risk postures. Concluded: That there is a correlation between age (ρ-value = 0.005), nutritional status (ρ-value = 0.003) and working postures (ρ-value = 0.036) and musculoskeletal disorders on the injection workers at PT. ARPS. Keywords: injection worker, musculoskeletal disorders, Nordic Body Map, Rapid Upper Limb Assessement, working postures



2021 ◽  
Vol 1 (1) ◽  
pp. 28-35
Author(s):  
Shifa Salimatusadiah ◽  
Nur Rahman As’ad ◽  
Puti Renosori

Abstract. CV. X is a company engaged in the convection of women's bags and mini backpacks. CV. X uses the make to order process. In the process of making a mini backpack, the activities are carried out in a sitting position according to the standard, namely the sewing process, while for the process of the pattern, the cutting process, and the process of installing the accessories are done in a sitting position on the floor without a base. Based on the results of interviews with operators, it was found that the most complaints with the working conditions of the neck bowed, back bent, sat barefooted with legs crossed occurred in the operator mounting accessories. The method used is the OWAS method and the Nordic Body Map Questionnaire. Based on the results of interviews and the Nordic Body Map questionnaire, complaints were felt that consisted of neck, lower back and lower legs, knees, buttocks, and ankles. The following conditions cause muscle injury, musculoskeletal disorders. The results of the determination of work risk using the Ovako Working Analysis System (OWAS) method obtained all work elements in the process of installing accessories with the second level category, namely the process of gluing spots, cutting relief materials, linking relief and hurdles, linking spots, uniting all elements, and installing accessories. Abstrak. CV. X merupakan perusahaan yang bergerak dibidang konveksi tas wanita dan mini backpack. CV. X menggunakan proses make to order. Pada proses pembuatan tas mini backpack yang aktivitasnya dikerjakan dengan posisi duduk sesuai standar yaitu proses penjahitan, sedangkan untuk proses pola, proses potong, dan proses pemasangan accesories dikerjakan dengan posisi duduk dilantai tanpa alas dilakukan secara berulang-ulang dan dalam jangka waktu yang lama. Berdasarkan hasil wawancara dengan operator didapatkan bahwa keluhan terbanyak dengan kondisi kerja leher menunduk, punggung membungkuk, duduk tanpa alas dengan kaki menyilang terjadi pada operator pemasangan accesories. Metode yang digunakan yaitu metode OWAS dan Kuisioner Nordic Body Map. Berdasarkan hasil dari wawancara dan kuisioner Nordic Body Map diperoleh keluhan yang dirasakan terdiri dari bagian leher, punggung atas dan bawah, lutut, bokong/paha, dan pergelangan kaki.. Hasil dari penentuan risiko kerja menggunakan metode Ovako Working Analysis System (OWAS) didapat seluruh elemen kerja pada proses pemasangan accesories dengan kategori level dua yaitu proses merekatkan bintik, menggunting bahan lega, mengaitkan lega dan gawang, mengaitkan bintik, menyatukan semua elemen, dan pemasangan accesories.



Author(s):  
Mufidha Khoirul Umami

Introduction: Musculoskeletal disorders occur due to various factors: main factors, such as extortion of the muscles, repetitive activities, non-ergonomic working postures; secondary factors (pressure, vibrant, microclimate), and individual factors (age, years of service, sex, nutritional status, physical endurance, smoking habits, physical strength and anthropometry). The workers in the Injection Department at PT. ARPS mostly work with non-ergonomic working postures. The aim of this study is to analyze the correlation between age, nutritional status, and working postures and the complaints on musculoskeletal disorders among the workers in the Injection department at PT. ARPS. Metods: This study applies analytic observational method with a cross-sectional design. The sample is chosen by implementing simple random sampling with a total of 52 respondents. The data collection to measure the ratio risk level of the working postures of the injection workers is completed by using Rapid Upper Limb Assessment (RULA) measurement method, while Nordic Body Map (NBM) questionnaire form is used to measure risk level of the disorder, and anthropometry measurement is applied to evaluate the nutritional status of the workers, such as their height and weight. The data are analyzed using Spearman Rho’s Correlation (significance level α = 5%). Results: The percentage of injection workers are <35 years old (76.9%), have normal nutritional status (59.6%), 27 workers (51.9%) have low musculoskeletal disorders and 19 others (36.5%) have low-risk postures. Concluded: That there is a correlation between age (ρ-value = 0.005), nutritional status (ρ-value = 0.003) and working postures (ρ-value = 0.036) and musculoskeletal disorders on the injection workers at PT. ARPS. Keywords: injection worker, musculoskeletal disorders, Nordic Body Map, Rapid Upper Limb Assessement, working postures



Author(s):  
Melia Agustin ◽  
Hendy Tannady ◽  
Octa Ferdian ◽  
Samuel Imanuel Gunawan Alamsjah

<p><em>Jaya Launch Pad is a company engaged in educational services. It is undeniable that service sector companies such as Jaya Launch Pad also have a workforce whose work posture may be less ergonomic, which can lead to musculoskeletal disorders. Musculoskeletal disorders can be experienced by people of all ages. Therefore, this study focuses on work posture. This research occurred because of complaints experienced by staff. The number of samples used in this study was 1 person. This was influenced by the Covid-19 pandemic situation so that there was only 1 staff when the observation was made. The research method used was the nordic body map (NBM) to determine which parts of the body are experiencing complaints, and the rapid office strain assessment (ROSA) to measure the risk of injury due to the posture of sitting at a computer for 8 hours. The result is that the complaint assessment using the NBM questionnaire has a score of 52 (needs improvement at a later date) with 4 categories of severe pain, namely back, waist, buttocks, and buttocks. Meanwhile, the score from the ROSA table is 6 which means it is risky / dangerous so that it needs improvement. Therefore, a proposed condition is given in the form of a replacement of work facilities in the form of a work chair with adjustable height and adjustable armrests. This improvement is assumed to be able to reduce the level of staff complaints, and the calculation result of the rapid office strain assessment (ROSA) is 4 which means no risk so that this improvement is accepted and can solve the work posture problem of staff at Jaya Launch Pad.</em></p><p><em> </em></p><p> </p>



2013 ◽  
Vol 10 ◽  
pp. 308-312 ◽  
Author(s):  
Che Hazwani Che Mansor ◽  
Safial Eqbal Zakaria ◽  
Siti Zawiah Md Dawal

The cross-sectional study was conducted amongst thirty eight government supporting staff who mainly doing sedentary task in Malaysia Maritime Enforcement Affair Division (MMEAD) (49%) and Ministry of Health (MOH) (51%) in Putrajaya. The investigation aims to determine the association between working postures and musculoskeletal disorders (MSD) among office workers where all respondents were selected in 5 sections; administrative (64%), financial (12%), counter/assistant (12%), human resources management (6%) and procurement section (6%). Self-reported questionnaires using Nordic questionnaire were used in this investigation. Besides, posture analysis was done based on Rapid Upper Limb Assessment (RULA) and office ergonomics checklist adapted from Texas Department of Insurance, Division of Workers Compensation (2008) were used as the instrumentations of this investigation. Face validity and reliability testing for the questionnaire and intra tester reliability for the posture assessment was done to ensure true quality of the results and analysis. From the analysis, the highest prevalence of MSD complained is lower back pain (LBP) 57.9% while the lowest prevalence is elbow pain (EP) 2.6%. Result shows 31.6% of the respondents believe the pain is caused by working activities. Based on the ergonomics checklist, MMEAD shows the highest mean (64.84%) of non compliance, where all the workstations scored more than 50% compared with MOH. Based on RULA observation, most of the workstation scores in action level 3 (grand score 5-6). In conclusion, the high complained of MSD is due to awkward postures, unsuitable workstation and lack of knowledge related to the areas to apply in everyday routine and it shows that working postures have a direct contribution on MSD complained by the office workers in Putrajaya.



Author(s):  
Gurdani Yogisutanti ◽  
Nuryanti Irawati ◽  
Neti Sitorus

Latar Belakang: Gangguan muskuloskeletal banyak dikeluhkan oleh penjahit yang bekerja di perusahaan dengan lama bekerja yang berkisar antara 6-8 jam per hari dan posisi statis. Tujuan: Penelitian ini dilakukan untuk menganalisis hubungan status gizi, masa kerja, dan sikap kerja dengan gangguan muskuloskeletal pada penjahit yang bekerja di suatu perusahaan di Kota Bandung. Metode: Metode penelitian menggunakan pendekatan cross sectional, melibatkan 30 orang penjahit sebagai responden yang diambil secara total sampling. Pengukuran status gizi dengan bantuan timbangan berat badan dan microtoise, untuk sikap kerja diukur menggunakan Rapid Entire Body Assessment (REBA) dan gangguan muskuloskeletal menggunakan Nordic Body Map (NBM). Hasil: Hasil penelitian menunjukkan bahwa sebagian besar responden mengeluhkan gangguan muskuloskeletal, sikap kerja yang berisiko dan status gizi dalam kategori gemuk. Responden yang mengalami keluhan muskuloskeletal dengan masa kerja kurang dari 5 tahun. Dapat disimpulkan bahwa keluhan  muskuloskeletal berhubungan dengan status gizi (p=0,001), masa kerja (p=0,000), dan sikap kerja (p=0,000). Kesimpulan: Berdasarkan hasil penelitian diketahui bahwa sebagian besar penjahit mengalami gangguan muskuloskeletal dan sikap kerja yang  berisiko, oleh karena itu perlu dilakukan peregangan setiap 4 jam sekali pada saat bekerja dan perlu melakukan senam punggung setiap hari sebelum tidur.



Author(s):  
Siavash Etemadinezhad ◽  
Fateme Ranjbar ◽  
Jamshid Yazdani Charati

Background and purpose: Work-related musculoskeletal disorders usually entangle back spines, neck and upper limbs. Working as a barber paves the ground for probable high prevalence of musculoskeletal disorders. This study was designed to evaluate the working postures of sari male barbers by Rapid Entire Body Assessment method and determining the prevalence of musculoskeletal disorders using NORDIC questionnaire.Methods: In the present research, 108 Sari barbers working conditions were evaluated using Rapid Entire Body Assessment (REBA) tool, and the data on the prevalence of musculoskeletal disorders was collected using Nordic questionnaire. Microsoft Excel and SPSS were then applied to analyze the data. Quantitative variables were analyzed using the descriptive statistical methods including mean and standard deviation. Chi-square test and ordinal regression have also been applied to analyze the relationship between different variables and musculoskeletal disorders' prevalence.Results: The mean age the participants was 33.11±8.2 and the mean of work experience was 12±3.7 years. According to the results of the Nordic questionnaire, during 12 past months, 78% of the studied subjects have discovered pain and discomfort at least in one of their 9 body regions. Complaints of musculoskeletal pains in the wrist were also most prevalent (72.1%), followed by the neck (49%) and elbow pains (46.2%). Through REBA Method, the highest frequency of corrective measures was at level 2 (73.9%).Conclusion: The results of the present study indicated that the evaluated subjects working postures required correction. Also, it was found essential to train barbers in what way to identify the biomechanical and ergonomic risk factors and correct working postures.



2021 ◽  
Vol 5 (2) ◽  
pp. 1
Author(s):  
Ade Sri Mariawati ◽  
I Putu Gede Adiatmika ◽  
Nyoman Adiputra ◽  
I Wayan Surata

Pharmaceutical work activities have a high repetition level with a work attitude of standing for 8 hours potentially causing musculoskeletal complaints, which can occur despite the normal work posture. This study aims to determine musculoskeletal disorders (MSDs) and the level of MSDs based on what categories are felt, the level of complaints, the level of frequency, and the severity. The research design using the questionnaire Nordic Body Map. The study was conducted in 17 pharmacies on 54 pharmaceutical workers. The results obtained by MSDs complaints based on what categories of pain statements obtained (43.2%), cramps (16.13%), aches (53.5%). The category of complaint level obtained statement rather sick (55.9%), sick (33.5%). The category of frequency level obtained by the statement that occurs 1 to 2 times per week (56.5%), and every day (10.6%). And the severity category states that the perceived complaint is still working (49.06%) and uncomfortable (47.1%). Index Terms— Muscle Fatigue, MSDs, Nordic Body Map, Pharmacist Assistant



2017 ◽  
Vol 18 (1) ◽  
pp. 43 ◽  
Author(s):  
Alfin Nur Bintang ◽  
Shanty Kusuma Dewi

Material handling activities of sugar in PG Tjoekir storage warehouse is done manually. Continuous material handling activity can cause musculoskeletal disorders to workers. The distribution of questionnaires Nordic Body Map known some complaints experienced by workers in the process of material handling sugar. The OWAS and RULA methods are methods for evaluating and analyzing worker attitudes that can cause musculoskeletal disorders. Some activities in the storage warehouse PG Tjoekir is ranging from lifting, moving and putting sugar. OWAS method calculation results obtained risk level score 3. Risk level risk of RULA method 4. The calculation results show some worker posture causing musculoskeletal risk so that need improvement. Proposed repair work posture is to design two-wheeled hand truck. Hand trucks help reduce the risk of musculoskeletal injuries for workers.



2021 ◽  
Vol 8 (1) ◽  
pp. 29
Author(s):  
Devi Krismayani ◽  
Partha Muliawan

ABSTRAK Keluhan musculoskeletal disorders (MSDs) adalah keluhan pada bagian otot skeletal yang dirasakan oleh seseorang mulai dari keluhan sangat ringan hingga sangat sakit. Pengrajin tenun merupakan salah satu pekerja yang berisiko untuk terkena keluhan musculoskeletal disorders dikarenakan proses kerja yang dilakukan secara manual dan terus menerus. Tujuan dari penelitian ini untuk mengetahui hubungan antara faktor individu (usia, IMT dan masa kerja) dan faktor okupasi (sikap kerja dan durasi kerja) dengan keluhan MSDs pada pengrajin tenun ikat di Kabupaten Klungkung. Penelitian ini merupakan penelitian analitik dengan pendekatan kuantitatif menggunakan rancangan cross-sectional. Penentuan sampel pada penelitian menggunakan metode accidental sampling dengan jumlah 42 responden. Keluhan MSDs pada pengrajin diukur menggunakan Nordic Body Map (NBM). Hasil menunjukan proporsi keluhan MSDs sebesar 73,81% dengan keluhan terbanyak pada bagian pinggang (73,81%), punggung (69,05%), dan pinggul (54,76%). Terdapat hubungan yang bermakna antara masa kerja, sikap kerja bagian leher, dan sikap kerja bagian punggung (p<0,05). Analisis multivariabel menunjukkan bahwa hanya variabel sikap kerja bagian punggung yang memiliki hubungan bermakna terhadap keluhan MSDs setelah variabel bebas lainnya di kontrol (p<0,05; OR=8,49). Kata Kunci: Pengrajin tenun ikat, keluhan MSDs, faktor individu dan okupasi



Sign in / Sign up

Export Citation Format

Share Document