scholarly journals Impact of agrotechnical methods on improvement of sowing qualities of F1 seeds of sunflower hybrid Fakel on hybridization plot (report I)

Author(s):  
A.S. Bushnev ◽  
◽  
A.K. Gridnev ◽  
G.I. Orekhov ◽  
D.A. Kurilova ◽  
...  

The studies were carried out in 2020 at the "Berezanskoye" agricultural enterprise located in the Korenovsky district of the Krasnodar region. The aim of the research was to establish the possibility of improving the sowing qualities and yielding properties of the forming F1 seeds in the hybridization plot of a simple interline hybrid of sunflower Fakel. We studied the influence of various complexes of agrotechnical methods on plants of the maternal form of sunflower: application of the fertilizers, biological preparations and protection means against diseases and pests. The after-effect of the positive impact of the preparations was investigated in 2021 in a field experiment on studying the field germination of F1 seeds of the sunflower hybrid Fakel. It was found that during the formation of F1 seeds of the hybrid Fakel at the hybridization plot, the best results in terms of seed quality were obtained using a complex of fertilizers and chemical plant protection, where the highest values of the indicators of the yield structure were noted (diameter and formation of a head, seed amount per a head, 1000 seed weight, and volume weight). This made it possible in F1 to have lower losses of field germination for the formation of a scientifically based plant density. As a result of phytoexamination of grown seeds, it was revealed that the use of protective measures at the hybridization plot during the growing season of plants of the maternal form of the hybrid Fakel made it possible to increase the percentage of formed healthy seeds. The best data on the level of field germination of seeds were obtained when using biological plant protection and microbiological fertilizers at the hybridization plot. This ensured the smallest loss of germination at the scientifically grounded plant density of the hybrid Fakel in F1.

Helia ◽  
2018 ◽  
Vol 41 (69) ◽  
pp. 227-239
Author(s):  
A. A. Kvashin ◽  
N. N. Neshchadim ◽  
E. K. Yablonskay ◽  
K. N. Gorpinchenko

AbstractIn the Russian Federation the most favorable area for high and stable yields of sunflower crop is the Northern zone of Krasnodar region. The research was conducted in multivariate experience of long-term stationary monitoring. We researched the effect of doses of mineral fertilizers and furolan on sunflower yield and seed quality. It was found that it is expedient and cost-effective to use small doses of nitrogen fertilizers for sunflower. The expediency of application of plant growth regulator (Furolan) during vegetation is shown. We found that the use of mineral fertilizers and the use of furolan contributed to the activation of growth processes of sunflower plants which led to the formation of optimal plant density. Improving the nutritional status of plants has provided an increase in the leaf area unit. The treatment of sunflower crops on the background of fertilizers N20P30 and the furolan has had a positive impact on the value of photosynthetic potential. Under the influence of mineral fertilizers there was an increase in the dissemination of the sunflower head, weight of seeds and weight of 1000 seeds, which has a positive impact on productivity. With the increase of fertilizer doses, the oil content of seeds increased when compared to the unfertilized variant. The treatment of plants with furolan has not violated the process of accumulation of protein and fat.


Agronomy ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 403
Author(s):  
Marta Jańczak-Pieniążek ◽  
Jan Buczek ◽  
Dorota Bobrecka-Jamro ◽  
Ewa Szpunar-Krok ◽  
Renata Tobiasz-Salach ◽  
...  

The appropriate row spacing and sowing density of soybeans are the basic non-input and pro-environmental agrotechnical factors. The optimal spacing of plants in the field can be crucial in terms of reducing competition between plants for water, nutrients and light, which is particularly important for photosynthesis and maximizes the use of environmental resources. The field experiment was carried out in the years 2017–2019 at the Experimental Station for Cultivar Assessment in Przecław, Poland, on Merlin cv. soybean plants. The experimental factors were: row spacing of 15 and 30 cm and the sowing density of 70, 90 and 110 pcs. m−2. During the research, the influence of row spacing and sowing density on yielding, seed quality, plant morphological features, nodulation and physiological processes in plants was assessed. The obtained soybean seed yield was not influenced by the experimental factors, but only by the weather conditions prevailing in the research years. The smaller row spacing and sowing density of 15/70 and 30/70 resulted in an increase in the parameters of the yield structure, the number and dry weight of root nodules, as well as the parameters of chlorophyll fluorescence (Fv/Fm, Fv/F0 and PI). Greater plant density per area unit resulted in low yield structure parameters, lower number and dry weight of nodules, poorer parameters of chlorophyll fluorescence and higher protein content in seeds. With the increased sowing density, the plants were higher, the 1st. pod was placed higher and an LAI value was also higher.


2019 ◽  
Vol 67 (7) ◽  
pp. 338-349
Author(s):  
Maryam Afshari ◽  
Jalal Poorolajal ◽  
Forouzan Rezapur-Shahkolai ◽  
Mohammad Javad Assari ◽  
Akram Karimi-Shahanjarini

Farmers in developing countries use harmful pesticides while taking few or no protective measures. There is limited evidence on factors affecting their safety measures. The objective of this study was to identify the underlying factors influencing farmers’ protective behaviors (PBs) and use of personal protective equipment (PPE) during the exposure to pesticides. From April to August 2017, a descriptive study was conducted in Twiserkan County in western Iran among 474 farmers from 104 villages. A questionnaire was developed to measure demographic characteristics and factors suggested in integrated agent-centered (IAC) framework. The questionnaire was validated in terms of content validity through expert reviews and tested for reliability in a group of farmers. Data were collected by face-to-face interviews with farmers. Physiological arousal (β = .154, p < .05), intention (β = .345, p < .05), habit (β = .188, p < .05), and contextual factors (β = .101, p < .05) had a significant and positive impact on farmers engaging in pesticide PBs. Among the assessed factors, only physiological arousal (β = .122, p < .05) and habit (β = .646, p < .05) were found to have a significant and positive effect on the use of PPE, but the intention (β = –.039, p > .05) and contextual factors (β = –.009, p > .05) had no significant relation with the use of PPE. The results of this study identified determinants of farmers’ safety measures. Our results suggest that the IAC framework could serve as a guide to developing a more effective intervention for safety measures of Iranian farmers.


2021 ◽  
Vol 262 ◽  
pp. 03009
Author(s):  
N. A. Ochkas ◽  
Yu. K. Goncharova ◽  
O. A. Braginа ◽  
K.S. Krikun

The paper describes a method for creating new and increasing the yield of existing varieties based on analysis variability elements of rice varieties yield structure under influence of environmental conditions. Seeding rates are used as a source of variability. Following trait are analyzed: seeds field germination, survival plants before harvesting, total tillering of plants, realization of total tillering, graininess of panicle, fertility of spikelets, weight of 1000 grains. Based on analysis, through onnections conjugated elements, the optimal values of elements structure of yield are determined, at which it takes the maximum value. Based on a set of optimal values, theoretical model of studied rice variety is being developed. Then, according to panicles selected in variety, single-row plots are sown for further propagation, rows with parameters of the yield structure elements set same with model of variety are selected, which makes it possible to increase the yield of Mavr rice variety by 39.18 centners / ha or 45.61%.


2021 ◽  
Vol 24 (6) ◽  
pp. 34-40
Author(s):  
Maria Zapisotska ◽  
Olexandra Voloshchuk ◽  
Ihor Voloshchuk ◽  
Valentyna Hlyva

The yield potential of winter wheat (Triticum aestivum L.) is formed in changing weather conditions and depends on the proposed agro-technological measures, to which the response of a particular variety is different. The purpose of this study was to determine the influence of weather factors on the field germination of soft winter wheat seeds, the growth and development of plants in the autumn and wintering in the zone of the Western Forest-Steppe of Ukraine, by sowing high-quality basic seed, careful soil preparation and the presence of optimum environmental factors. A sufficient level of productive soil moisture, which protects young shoots from possible deficiency after germination and is a long-term source of moisture at the next stages of organogenesis, has a great influence on obtaining friendly and timely shoots. Often overwintering conditions, when plants suffer from low negative temperatures at the beginning and at the end of the winter period, ground ice crust, resumption of vegetation in winter are the causes of freezing, loss, and ultimately a decrease in yield and seed quality. It has been confirmed that an increase in the temperature regime in 244-247°C in the autumn-winter period and the optimal amount of precipitation contribute to sufficient (31.6-34.6 mm) productive soil moisture (0-20 cm), which positively influences the process of germination of soft winter wheat, provides a high percentage of field germination of seeds of varieties (93.8-94.5%), lengthens the autumn development of plants by 3-12 days, which causes 3.5-5.7% higher accumulation of sugar content in the tillering nodes and a high percentage of overwintering (up to 95.5-96.4%). Varieties of the forest-steppe ecological type of soft winter wheat have insignificant phenotypic variability of adaptive traits, therefore, in the production of grain and seed products, it is recommended to give preference to the plant varieties listed in the Register, suitable for distribution in Ukraine for the Forest-Steppe zone, Polissya. The recommendations set out in this scientific work will help agricultural producers of the studied soil and climatic zone to carry out an effective, more ecologically plastic, highly productive variety replacement


2020 ◽  
Vol 18 (2) ◽  
pp. 81
Author(s):  
SUKARMAN SUKARMAN

<p>ABSTRAK<br />Sampai saat ini informasi pengaruh jarak tanam dan dosis pupuk<br />terhadap produktivitas, dan viabilitas benih nilam (Pogostemon cablin<br />Benth) masih terbatas. Untuk itu penelitian ini dilakukan dengan tujuan<br />mendapatkan jarak tanam dan dosis pupuk yang optimum untuk produksi<br />benih/setek nilam. Penelitian dilakukan di Kebun Percobaan (KP)<br />Sukamulya, Balai Penelitian Tanaman Rempah dan Industri Lain (Balittri),<br />Pakuwon, Parungkuda, Sukabumi, dari Januari sampai November 2010.<br />Percobaan faktorial, dengan tiga faktor dan tiga ulangan, disusun dalam<br />rancangan petak terbagi dua kali (RPPT). Petak utama adalah dua varietas<br />nilam yaitu Sidikalang dan Lhokseumawe. Anak petak adalah tiga jarak<br />tanam yaitu (1) 1 x 0,5 m; (2) 1 x 0,7 m; dan (3) 1 x 1 m. Anak-anak petak<br />adalah dua dosis pemupukan yaitu : 1) 30 ton pupuk kandang, 300 kg urea,<br />150 kg SP-36, dan 300 kg KCl/th, dan 2) 45 ton pupuk kandang, 450 kg<br />urea, 225 kg SP-36, dan 450 kg KCl/th. Ukuran plot 8,4 x 5 m. Parameter<br />yang diamati adalah pertumbuhan tanaman (tinggi tanaman, jumlah<br />cabang primer, sekunder, dan tersier), produksi benih pertanaman,<br />diameter bagian pangkal, tengah, dan pucuk dari cabang primer dan<br />sekunder, kadar karbohidrat dan serat, dan viabilitas benih setek.<br />Pengamatan dilakukan pada umur enam bulan setelah tanam (6 BST).<br />Hasil penelitian menunjukkan bahwa : (1) varietas Sidikalang dengan<br />dosis pemupukan 45 ton pupuk kandang, 450 kg urea, 225 kg SP-36, dan<br />450 kg KCl/th, menghasilkan jumlah cabang primer paling tinggi yaitu<br />14,29; (2) jarak tanam 1 x 0,5 m menghasilkan benih setek tertinggi<br />(73.555 stek/1.000 m 2 ). Rata-rata diameter benih berasal dari pangkal ≥ 5<br />mm, sedangkan rata-rata diameter benih berasal dari pucuk ≥ 4 mm; (3)<br />Viabilitas benih pada 0 dan 4 hari setelah penyimpanan ≥ 80%. Jarak<br />tanam 1 x 0,5 m dengan dosis pupuk kandang sebanyak 30 ton, 300 kg<br />urea, 150 kg SP-36, dan 300 kg KCl pertahun merupakan dosis yang<br />optimal untuk produksi benih/setek nilam. Kombinasi perlakuan<br />pemupukan 30 ton pupuk kandang, 300 kg urea, 150 kg SP-36, 300 kg<br />KCl/th dengan jarak tanam 1 x 0,5 m menghasilkan keuntungan tertinggi<br />yaitu: Rp 6.668.500 dengan nilai B/C 2,05.<br />Kata kunci : Pogostemon cablin Benth, jarak tanam, pemupukan,<br />produksi, kualitas benih/setek</p><p>ABSTRACT<br />Effect of Spacing and Fertilizer Dosages on Production<br />and Viability of Patchouli Cutting Seeds<br />Information on the effect of plant density and fertilizer dosage on<br />the production and viability of patchouli seeds is still limited. This<br />experiment was aimed at finding out optimum plant spacing and fertilizer<br />dosage for improving production and quality of patchouli cutting seeds.<br />The experiment was conducted at Sukamulya experimental station of<br />Indonesian Spice and Industrial Crops Research Institute (ISICRI),<br />Pakuwon, Sukabumi from January through November 2010. This<br />experiment was consisted of three factors and three replicates and was<br />arranged in a split-split-plot design. The main plots were two varieties of<br />patchouli, i.e. V1 = Sidikalang and V2 = Lhokseumawe. The sub plots<br />were three plant spacing dimentions, i.e. S1 (1 x 0.5 m), S2 (1 x 0.7 m),<br />and S3 (1 x 1 m). The sub-sub plots were two levels of fertilizer dosage,<br />i.e. F1 (manure; urea, SP-36, and KCl of 30 t; 450, 225, and 450 kg/ha,<br />respectively) and F2 (manure; urea, SP-36, and KCl of 45 t; 300, 150, and<br />450 kg/year, respectively). Variables observed were plant growth (plant<br />height; number of primary, secondary, and tertiary branches), seed<br />productivity and viability, diameter of bottom, medium, and upper of<br />cutting seeds. The results of experiment indicated that Sidikalang variety,<br />treated with 45 tons of manure, 450 kg urea, 225 kg SP-36, and 450 kg<br />KCl per hectare produced the highest number of primary branches<br />compared to other treatments. Plant spacing of 1 x 0.5 m produced the<br />highest number of cutting seeds (73,555 stumps/1,000m 2 ). The averaged<br />diameters of cutting seeds from basal were ≥ 5 mm while those from top<br />were ≥ 4 mm. Viability of the cutting seeds at 0 and 4 days after storage<br />was ≥ 80%. Plant spacing 1 x 0.5 m with dosage of fertilizer 30 ton dung<br />manure, 300 kg urea, 150 kg SP-36, and 300 kg KCl per year is the dosage<br />optimum for producing seed/cutting of patchouli. Combination of fertilizer<br />dosages of 30 tons manure, 300 kg urea, 150 kg SP-36, and 300 kg KCl<br />per year and plant spacing of 1 x 0.5 m produced the highest profit as<br />much as Rp 6,668,500 with B/C value of 2.05.<br />Key words: Pogostemon cablin Benth, plant spacing, fertilizer,<br />production, cutting seed quality</p>


2014 ◽  
Vol 32 (1) ◽  
pp. 61-68
Author(s):  
A. Foroughi ◽  
J. Gherekhloo ◽  
F. Ghaderi-Far

Experiments were conducted in 2010 to determine the influence of plant density and seed position on the mother plant on seed physiological characteristics of cocklebur (Xanthium strumarium). Cocklebur burs were collected in fall of 2010 from Research Farm of University of Agricultural Sciences and Natural Resources of Gorgan, Iran. The experiment was established as factorial arrangement using a completely randomized design with three replications. The factors included different densities of cocklebur (0, 2, 4, 6 and 8 plant m-2) and the top and bottom parts of the canopy. Non dormant seeds were used for determining cardinal temperatures and tolerance to salinity and drought stresses. Base, optimum and ceiling germination temperatures were estimated between 7.09 to 12.33, 32 to 35 and 44 to 45 respectively in different treatments. Salinity stress up to 300 Mm and osmotic potential 8 bar inhibited the germination completely. Comparison of base temperatures and sigmoid equation coefficients showed that seeds produced in the top had higher germination than those that produced at the bottom of the mother plant. It seems plant densities through seed position on the mother plant affect seed quality. Likewise changes of light quality and quantity in shade environment increased seed dormancy in matured seeds. Shade environment affect seed germination on mother plant that increased dormancy of seeds maturing under shade be an adaptive response that reduces the probability of germination of offspring under unfavorable (shade, competitive) conditions.


2020 ◽  
Vol 21 ◽  
pp. 00020
Author(s):  
Vladimir Pavlyushin

Phytosanitary optimization of agricultural ecosystems under conditions of glasshouses and organic farming urgently demands guaranteed effect of plant protection. This can be achieved only through effective exploitation of a complex of biological agents, including arthropod predators and parasites, entomopathogenic fungi, nematodes and other microbes. Entomopathogenic fungi Beauveria bassiana and Lecanicillium muscarium are characterized by facultative parasitism and possess high potential to control phytophagous insects, including pests of vegetable crops in glasshouses. In aphids, fungal pathogenesis was found to be comprised of primary mycosis and toxigenic post-effect in a row of consequent generations. For example, L. muscarium and B. bassiana had an adverse effect on fertility and survival rates of females of aphids Aphis gossypii up to the fifth generation. The longevity, reproductive period and amount of progeny were decreased in aphids treated with water suspension of fungal conidia. It can be deduced that the post-effect is caused by toxic action of metabolites as no evident mycosis was observed in the experiments. Similar type of after-effect is observed in the lacewing Chrysopa carnea contaminated with fungal conidia. The effect is also toxigenic being most prominent in the first generation of the survivors’ progeny and traceable up to the fifth generation. The consequences of the infection are best seen in the rate adult emergence which is twice as low as compared to control. This knowledge is essential to avoid antagonism between different groups of natural enemies exploited in biological control and to design adequate technology for their application.


Sign in / Sign up

Export Citation Format

Share Document