scholarly journals CRUSTACEAN WASTE SHELLS AS ADSORPTION MATERIALS FOR HEAVY METALS IN AN AQUEOUS SOLUTION

2020 ◽  
Vol 4 (2) ◽  
pp. 33-25
Author(s):  
Queency P. Padida ◽  
Rolando V. Maningas ◽  
Christian Paul P. dela Cruz ◽  
Lustina P. Lapie ◽  
Nilda S. Alforja
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
Contact Time ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
High Capacity ◽  
Adsorption Rate ◽  
Agriculture Industry ◽  
Laguna De Bay ◽  
High Concentrations

Laguna de Bay is one of the country’s major lakes, providing a third of the fish consumed by Metro Manila’s 16 million residents. It also provides support for agriculture, industry, and hydropower generation, as well as providing a welcome respite for many Filipinos. However, because of the lake’s importance, it is threatened by a variety of issues, including pollution. Heavy metals such as mercury and lead are present in high concentrations in the lake. And these heavy metals may persist in fish, water, air and the human body. As a result, an adsorption technique for heavy metal removal in an aqueous solution was investigated. As an adsorbent, the produced chitosan from crustacean waste shells was employed. The study’s parameters were contact time, adsorbent quantity, and pH. Results showed that 0.5 g of chitosan has a higher absorption rate of 99% in 500 mg/L solutions compared to 1.0 g of chitosan with an adsorption rate of 98%. In terms of contact time, 60 minutes showed almost 100% adsorption rate while 120 minutes was 98%. With increasing pH, the amount of metal adsorption rises. This developed chitosan from crustacean waste shells indicates high capacity as adsorbent materials for heavy metals. As a result, it appears to be a viable material for water treatment.

scholarly journals CRUSTACEAN WASTE SHELLS AS ADSORPTION MATERIALS FOR HEAVY METALS IN AN AQUEOUS SOLUTION

2020 ◽  
Vol 4 (2) ◽  
pp. 33-35
Author(s):  
Queency P. Padida ◽  
Rolando V. Maningas ◽  
Christian Paul P. dela Cruz ◽  
Lustina P. Lapie ◽  
Nilda S. Alforja
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
Contact Time ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
High Capacity ◽  
Adsorption Rate ◽  
Agriculture Industry ◽  
Laguna De Bay ◽  
High Concentrations

Laguna de Bay is one of the country's major lakes, providing a third of the fish consumed by Metro Manila's 16 million residents. It also provides support for agriculture, industry, and hydropower generation, as well as providing a welcome respite for many Filipinos. However, because of the lake's importance, it is threatened by a variety of issues, including pollution. Heavy metals such as mercury and lead are present in high concentrations in the lake. And these heavy metals may persist in fish, water, air and the human body. As a result, an adsorption technique for heavy metal removal in an aqueous solution was investigated. As an adsorbent, the produced chitosan from crustacean waste shells was employed. The study's parameters were contact time, adsorbent quantity, and pH. Results showed that 0.5 g of chitosan has a higher absorption rate of 99% in 500 mg/L solutions compared to 1.0 g of chitosan with an adsorption rate of 98%. In terms of contact time, 60 minutes showed almost 100% adsorption rate while 120 minutes was 98%. With increasing pH, the amount of metal adsorption rises. This developed chitosan from crustacean waste shells indicates high capacity as adsorbent materials for heavy metals. As a result, it appears to be a viable material for water treatment.

scholarly journals Synthesis, characterization and heavy metal removal efficiency of nickel ferrite nanoparticles (NFN’s)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Waheed Ali Khoso ◽  
Noor Haleem ◽  
Muhammad Anwar Baig ◽  
Yousuf Jamal
Keyword(s):  
Heavy Metals ◽  
Nickel Ferrite ◽  
Contact Time ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Ferrite Nanoparticles ◽  
Batch Adsorption ◽  
Aqueous Environment ◽  
Human Beings ◽  
Nickel Ferrite Nanoparticles

AbstractThe heavy metals, such as Cr(VI), Pb(II) and Cd(II), in aqueous solutions are toxic even at trace levels and have caused adverse health impacts on human beings. Hence the removal of these heavy metals from the aqueous environment is important to protect biodiversity, hydrosphere ecosystems, and human beings. In this study, magnetic Nickel-Ferrite Nanoparticles (NFNs) were synthesized by co-precipitation method and characterized using X-Ray Diffraction (XRD), Energy Dispersive Spectroscopy (EDS) and Field Emission Scanning Electronic Microscopy (FE-SEM) techniques in order to confirm the crystalline structure, composition and morphology of the NFN’s, these were then used as adsorbent for the removal of Cr(VI), Pb(II) and Cd(II) from wastewater. The adsorption parameters under study were pH, dose and contact time. The values for optimum removal through batch-adsorption were investigated at different parameters (pH 3–7, dose: 10, 20, 30, 40 and 50 mg and contact time: 30, 60, 90, and 120 min). Removal efficiencies of Cr(VI), Pb(II) and Cd(II) were obtained 89%, 79% and 87% respectively under optimal conditions. It was found that the kinetics followed the pseudo second order model for the removal of heavy metals using Nickel ferrite nanoparticles.

Preparation and characterization of Ca-doped zinc oxide nanoparticles for heavy metal removal from aqueous solution

MRS Advances ◽  
2016 ◽  
Vol 1 (53) ◽  
pp. 3607-3612 ◽  
Author(s):  
Imed Ghiloufi ◽  
Jaber El Ghoul ◽  
Abueliz Modwi ◽  
Lassaad El Mir
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
Heavy Metal ◽  
Zinc Oxide ◽  
Metal Removal ◽  
Sol Gel ◽  
Heavy Metal Removal ◽  
Nano Zinc Oxide ◽  
Calcium Doped ◽  
Nano Zinc

ABSTRACTNano zinc oxide (ZnO) and Calcium doped zinc oxide (CZ) nanopowders were synthesized by sol–gel method from zinc acetate di-hydrate and an adequate quantity of calcium chloride hexa-hydrate. Calcium doped zinc oxide (CZ) were prepared at different Ca concentrations from 1 wt% (CZ1) to 5 wt% (CZ5). The obtained nanopowders were characterized by transmission electron microscopy and X-ray diffraction. The objective of this work is to find a new and highly efficient nanomaterial for the adsorption of heavy metals from waste water. For this reason, the nanopowders were used to uptake heavy metals (Cr, Cd, and Ni) from aqueous solution. The obtained results show that the incorporation of Ca in nanoparticles zinc oxide (ZnO) increases the capacity adsorption of nanopowders and CZ3 is more efficient than the other Ca-doped samples. In this work we studied also the effect of pH and the pyrolysis temperature of the nanopowders on the removal of heavy metal ions from aqueous solution by CZ3.

scholarly journals Utilization of Banana (Musa sapientum) Peel for Removal of Pb2+ from Aqueous Solution

2021 ◽  
Vol 1 (2) ◽  
pp. 117-128
Author(s):  
Afrida Nurain ◽  
Protima Sarker ◽  
Md. Shiblur Rahaman ◽  
Md. Mostafizur Rahman ◽  
Md. Khabir Uddin
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Adsorption Isotherm ◽  
Contact Time ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Agitation Speed ◽  
Banana Peel ◽  
Management Problem ◽  
Freundlich Adsorption Isotherm

Biosorption is a convenient process for heavy metal remediation. In this study, banana peel was experimented to eliminate lead (Pb2+) from an aqueous solution following batch experiments. The functional groups of banana peel were identified by Fourier-transform infrared spectroscopy (FTIR). The adsorption mechanism was studied by the Langmuir and Freundlich adsorption isotherm model and determined the separation factor from the Langmuir adsorption isotherm. The adsorption of Pb2+ on dried banana peel had been studied at different adsorbent doses, pH, initial concentration of Pb, contact time, temperature, and agitation speed. After adsorption, Pb2+ was measured using atomic absorption spectroscopy (AAS). Maximum adsorption had taken place at pH 5 for adsorbent dose 45 g L-1. The optimum contact time and agitation speed was 30 minutes and 150 rpm, respectively for the initial Pb concentration of 100 ppm at 25°C. Both, Langmuir and Freundlich adsorption isotherm models shows the best fitting (r2 = 0.9978 and 0.9595) for Pb2+ adsorption. The maximum Pb2+ adsorption capacity was 2.1 mg g-1. The findings indicate that the banana peel waste could be a potential adsorbent for heavy metal removal. Moreover, the waste management problem could be solved in an eco-friendly manner by utilizing it for the eradication of Pb2+ from wastewater.

Low Cost Absorbents, Techniques, and Heavy Metal Removal Efficiency

2018 ◽  
pp. 50-79
Author(s):  
Harendra Kumar Sharma ◽  
Irfan Rashid Sofi ◽  
Khursheed Ahmad Wani
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Heavy Metal Contamination ◽  
Metal Removal ◽  
Low Cost ◽  
Heavy Metal Removal ◽  
Future Research ◽  
Removal Of Heavy Metals ◽  
Living Species ◽  
High Concentrations

Heavy metal contamination in water is a serious concern to the environment and human health. High concentrations of heavy metals in the environment can be toxic to a variety of living species. Natural bio-absorbents are abundant and inexpensive and considered a waste if not managed properly. The role of bio-absorbents has been widely studied and has been utilized for the removal of heavy metals. The objective of the chapter is to search the database for different absorbents and their efficiency for the removal of heavy metals. Key words related to the study have been used to select different papers published by the researchers all over the world. A rigorous three-tier process has been utilized by the authors to select the papers from the database for the current study. This chapter has identified a few research gaps in the field of heavy metal removal by using different low cast absorbents that need to be taken into account in future research.

scholarly journals Exploring the Potential in LID Technologies for Remediating Heavy Metals in Carwash Wastewater

2021 ◽  
Vol 13 (16) ◽  
pp. 8727
Author(s):  
Fatemeh Talebzadeh ◽  
Caterina Valeo ◽  
Rishi Gupta ◽  
C. Peter Constabel
Keyword(s):  
Heavy Metals ◽  
Rural Communities ◽  
Metal Removal ◽  
Low Impact Development ◽  
Heavy Metal Removal ◽  
Urban Environments ◽  
Treatment Processes ◽  
Wide Range ◽  
Removal Processes ◽  
High Concentrations

Carwash wastewater (CWW) can be a significant source of environmental pollution due to the diversity and high concentrations of contaminants it contains. This toxic wastewater can contain several different heavy metals that if left untreated, can enter surface and sub-surface waters. Innovative, nature-based solutions such as low-impact development (LID) technologies may provide an eco-friendly CWW treatment process that is both effective and affordable. This research reviews the available literature to provide definitive values of flowrate and contaminant concentrations found in CWW around the globe. Dividing LID technologies into two groups, vegetated and unvegetated systems, the authors explored the literature for the general performance of these technologies to sustainably treat heavy metals in CWW. Depending on the car wash’s size and intended purpose, whether cleaning vehicles in agriculture-based rural communities, mining, or in high-density urban environments, volumetric flowrates requiring treatment found in six different countries ranged from 35–400 L/car. CWW also contains a wide range of contaminants at various levels, including COD, turbidity, TDS and TSS, surfactants, oils and greases, and heavy metals such as lead, cadmium, zinc, copper, chromium, and iron. Heavy metal removal by both vegetated and unvegetated LIDs shows mixed results in the literature, but given the different processes involved in both types, the authors propose a system that combines these types in order to provide all the necessary removal processes, including mechanical filtration, adsorption, sedimentation, chemical and biological treatment processes.

Removal of Pb2+, Cu2+, Ni2+, Cd2+ from Wastewater using Fly Ash Based Geopolymer as an Adsorbent

2018 ◽  
Vol 773 ◽  
pp. 373-378 ◽  
Author(s):  
Sujitra Onutai ◽  
Takaomi Kobayashi ◽  
Parjaree Thavorniti ◽  
Sirithan Jiemsirilers
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
Heavy Metal ◽  
Fly Ash ◽  
Surface Area ◽  
Removal Efficiency ◽  
High Efficiency ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Removal Capacity

This work aims to evaluate the effectiveness of fly ash based geopolymer powder as an adsorbent for heavy metals in aqueous solution. The structure of synthesized geopolymer was found to be highly amorphous due to the dissolution of fly ash phase. Moreover, the fly ash geopolymer powder has higher surface area compares to original fly ash with specific surface area of 85.01 m²/g and 0.83 m2/g, respectively. For this reason, the geopolymer powder has much higher removal efficiency compared to the original fly ash powder. The removal efficiency was affected by contact time, geopolymer amount, heavy metal initial concentration, pH, and temperature. The four heavy metals were chosen (Pb2+, Cu2+, Ni2+, Cd2+) for adsorption test. The highest heavy metal removal capacity was obtained at pH 5. The geopolymer powder adsorbed metal cations in the order of Pb2+>Cu2+>Cd2+>Ni2+. In addition, Langmuir model is more suitable for fly ash geopolymer powder adsorption of heavy metal ions in aqueous solution than Freundlich model. The results showed that the fly ash geopolymer powder has high efficiency for removal metal which could be employed excellent alternative for wastewater treatment.

scholarly journals Heavy metal removal by biopolymers-based formulations with native potato starch/nopal mucilage

2020 ◽  
Author(s):  
David Choque-Quispe ◽  
Betsy Suri Ramos-Pacheco ◽  
Carlos Alberto Ligarda-Samanez ◽  
Gloria Inés Barboza-Palomino ◽  
Aydeé Kari-Ferro ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Removal ◽  
Potato Starch ◽  
Structural Characteristics ◽  
Heavy Metal Removal ◽  
High Capacity ◽  
P Value ◽  
Critical Problem ◽  
Nopal Mucilage

The contamination of water bodies by heavy metals is a critical problem for human health and ecosystems, and it can bioaccumulate in organisms to toxic levels and even lead to the living being’s death. This research aimed to synthesize and characterize a biopolymer with the capacity to remove heavy metals in wastewater, elaborated from potato starch, glycerin, and nopal mucilage. Native potato starch of the Allcca sipas variety was extracted by conventional methods; the mucilage was extracted with ethanol. Four formulations of biopolymers were synthesized at 60 and 70 °C. The solubility, structural characteristics, and adsorption capacity of heavy metals were evaluated. Starch, mucilage, and biopolymers presented predominant functional groups as -OH, -C-O-, -NH-, -C-H-, -C-OH determined by FTIR, allowing to remove up to 50.18% of Al, 56.81% of As, 35.95% of Cr, 37.43% of Hg and 73.22% of Pb determined through an ICPE-OES, for a contact time of 100 minutes at pH 5.0, heavy metal removal and solubility were significantly influenced (p-value < 0.05) by the addition of starch and mucilage. The synthesized biopolymers present a high capacity for heavy metal removal in wastewater.

Colour and Heavy Metal Removal From Dyebath Effluents by Lime Precipitation

1975 ◽  
Vol 10 (1) ◽  
pp. 151-163
Author(s):  
A. Netzer ◽  
S. Beszedits
Keyword(s):  
Heavy Metals ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Colour Intensity ◽  
Textile Mills ◽  
Novel Approach ◽  
Dissolved Organics ◽  
High Concentrations ◽  
Degree Of Purification ◽  
Substantial Degree

Abstract Effluents from textile mills, carpet and hat dyeing operations create some of the worst industrial pollution. Not only are these discharges characterized by the presence of obnoxious and persistent colours, but they also contain high concentrations of dissolved organics and considerable amounts of such heavy metals as Zn, Cr, Hg, Pb, Cu and Co. An effective and economical reduction in the colour intensity and heavy metals concentration of these wastes can often be achieved with lime precipitation. Ten different dyebath effluents from various dyeing operations were treated with both massive lime dosages as well as controlled lime dosages to study the effect of pH upon decolourization and the removal of soluble organics and heavy metals. Colour intensity was evaluated by a novel approach proposed recently by the American Dye Manufacturers' Institute. The results indicate that all free heavy metals present in these wastewaters can be removed virtually 100% by lime precipitation. In some cases, excellent colour and good TOC removals were attained as well. Therefore, very often, but not always, treatment of dyebath effluents with lime can achieve a substantial degree of purification.

Understanding the factors influencing the removal of heavy metals in urban stormwater runoff

2016 ◽  
Vol 73 (12) ◽  
pp. 2921-2928 ◽  
Author(s):  
Marla C. Maniquiz-Redillas ◽  
Lee-Hyung Kim
Keyword(s):  
Heavy Metals ◽  
Fine Particles ◽  
Metal Removal ◽  
Low Impact Development ◽  
Heavy Metal Removal ◽  
Stormwater Runoff ◽  
Winter Season ◽  
Filter Media ◽  
Factors Influencing ◽  
Removal Of Heavy Metals

Abstract In this research, an infiltration trench equipped with an extensive pretreatment and filter bed consisting of woodchip, sand and gravel was utilized as a low impact development technique to manage stormwater runoff from a highly impervious road with particular emphasis on heavy metal removal. Findings revealed that the major factors influencing the removal of heavy metals were the concentration of the particulate matters and heavy metals in runoff, runoff volume and flow rates. The reduction of heavy metals was enhanced by sedimentation of particulates through pretreatment. Fine particles (&lt;2 mm) had the most significant amount of heavy metals, thus, enhanced adsorption and filtration using various filter media were important design considerations. Sediment was most highly attached on the surface area of woodchip than to other filter media like sand, gravel and geotextile. It is suggested that maintenance must be performed after the end of the winter season wherein high sediment rate was observed to maintain the efficiency of the treatment system.

Sign in / Sign up

Export Citation Format

Share Document