Local identification of persistent cold air pool conditions in the Great Hungarian Plain

Időjárás ◽  
2021 ◽  
Vol 125 (2) ◽  
pp. 167-192
Author(s):  
Karolina Szabóné André ◽  
Judit Bartholy ◽  
Rita Pongrácz ◽  
József Bór
Keyword(s):  
Meteorological Data ◽  
Weather Conditions ◽  
Reanalysis Data ◽  
Weather Event ◽  
Cold Air ◽  
Great Hungarian Plain ◽  
Winter Time ◽  
Heat Deficit ◽  
Local Detection ◽  
Hungarian Plain

Cold air pool (CAP) is a winter-time, anticyclonic weather event: a cold air layer confined by the topography and warm air aloft. If its duration is more than one day, then it is called persistent cold air pool (PCAP). CAPs are mainly examined in small basins and valleys. Fewer studies pay attention to PCAPs in much larger basins (with an area of more than 50 000 km2), and it is not evident how effective the existing numerical definitions are in cases of extensive PCAP events. A possible method of identifying PCAPs in a large basin is to identify PCAP weather conditions at different measuring sites across the basin. If there are PCAP weather conditions at most of the sites, then it is likely to be an extensive PCAP. In this work, we examine which of the documented CAP definitions can be used for reliable local detection of CAP conditions. Daily weather reports and meteorological data from two locations in the 52 000 km2 sized Great Hungarian Plain have been used to obtain a reference set of days with PCAP weather conditions during two consecutive winter months. Several numerical CAP definitions were compared for their performance in recognizing the presence of PCAP weather conditions using radiosonde measurements and reanalysis data. The lowest error was produced by using the heat deficit (HD) method. So this is considered the most suitable method for local identification of PCAPs in the Great Hungarian Plain.

scholarly journals Rain Erosion Maps for Wind Turbines Based on Geographical Locations: A Case Study in Ireland and Britain

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
K. Pugh ◽  
M. M. Stack
Keyword(s):  
Wind Turbine ◽  
Western Europe ◽  
Meteorological Data ◽  
Turbine Blades ◽  
Weather Conditions ◽  
Annual Rainfall ◽  
Wind Turbine Blades ◽  
Weather Patterns ◽  
The Uk

AbstractErosion rates of wind turbine blades are not constant, and they depend on many external factors including meteorological differences relating to global weather patterns. In order to track the degradation of the turbine blades, it is important to analyse the distribution and change in weather conditions across the country. This case study addresses rainfall in Western Europe using the UK and Ireland data to create a relationship between the erosion rate of wind turbine blades and rainfall for both countries. In order to match the appropriate erosion data to the meteorological data, 2 months of the annual rainfall were chosen, and the differences were analysed. The month of highest rain, January and month of least rain, May were selected for the study. The two variables were then combined with other data including hailstorm events and locations of wind turbine farms to create a general overview of erosion with relation to wind turbine blades.

scholarly journals Using climate reanalysis data in conjunction with multi-temporal satellite thermal imagery to derive supraglacial debris thickness changes from energy-balance modelling

2021 ◽  
pp. 1-19
Author(s):  
Rebecca L. Stewart ◽  
Matthew Westoby ◽  
Francesca Pellicciotti ◽  
Ann Rowan ◽  
Darrel Swift ◽  
...  
Keyword(s):  
Energy Balance ◽  
Surface Energy ◽  
Surface Energy Balance ◽  
Current Knowledge ◽  
Meteorological Data ◽  
Reanalysis Data ◽  
Balance Model ◽  
Thermal Imagery ◽  
Thickness Estimation ◽  
Miage Glacier

Abstract Surface energy-balance models are commonly used in conjunction with satellite thermal imagery to estimate supraglacial debris thickness. Removing the need for local meteorological data in the debris thickness estimation workflow could improve the versatility and spatiotemporal application of debris thickness estimation. We evaluate the use of regional reanalysis data to derive debris thickness for two mountain glaciers using a surface energy-balance model. Results forced using ERA-5 agree with AWS-derived estimates to within 0.01 ± 0.05 m for Miage Glacier, Italy, and 0.01 ± 0.02 m for Khumbu Glacier, Nepal. ERA-5 data were then used to estimate spatiotemporal changes in debris thickness over a ~20-year period for Miage Glacier, Khumbu Glacier and Haut Glacier d'Arolla, Switzerland. We observe significant increases in debris thickness at the terminus for Haut Glacier d'Arolla and at the margins of the expanding debris cover at all glaciers. While simulated debris thickness was underestimated compared to point measurements in areas of thick debris, our approach can reconstruct glacier-scale debris thickness distribution and its temporal evolution over multiple decades. We find significant changes in debris thickness over areas of thin debris, areas susceptible to high ablation rates, where current knowledge of debris evolution is limited.

Statistical Analysis of Weather Effects on PM2.5

2012 ◽  
Vol 610-613 ◽  
pp. 1033-1040
Author(s):  
Wei Dai ◽  
Jia Qi Gao ◽  
Bo Wang ◽  
Feng Ouyang
Keyword(s):  
Statistical Analysis ◽  
Wind Speed ◽  
Relative Humidity ◽  
Statistical Methods ◽  
Predictive Analytics ◽  
Hypothesis Test ◽  
Meteorological Data ◽  
Weather Conditions ◽  
Statistical Distribution ◽  
Weather Effects

Effects of weather conditions including temperature, relative humidity, wind speed, wind and direction on PM2.5 were studied using statistical methods. PM2.5 samples were collected during the summer and the winter in a suburb of Shenzhen. Then, correlations, hypothesis test and statistical distribution of PM2.5 and meteorological data were analyzed with IBM SPSS predictive analytics software. Seasonal and daily variations of PM2.5 have been found and these mainly resulted from the weather effects.

The Carpathian Mountain range and the enclosed interior

2009 ◽  
Vol 1 (3) ◽  
Author(s):  
Gabor Földvary
Keyword(s):  
Plate Tectonics ◽  
Ore Deposits ◽  
Carpathian Basin ◽  
Mountain Range ◽  
Great Hungarian Plain ◽  
The Carpathians ◽  
Carpathian Mountain ◽  
Micro Plates ◽  
Basin System ◽  
Hungarian Plain

AbstractThe baffling duality of the Carpathian Mountain Range and the Basin it surrounds is briefly discussed. The various attempts at solving the nature of this duality, including plate tectonics with its micro-plates are mentioned. The component ranges of the Carpathians and the structural belts are given, followed by the discussion of the Carpathian Basin System, the Interior, consisting of the Great Hungarian Plain, Transdanubia, the two groups of Central Mountains, also the Apuseni (Bihar) Mountains and the Banat Contact Belt. Economic ore deposits are featured in the relevant sections.

Integrated spatial assessment of inland excess water hazard on the Great Hungarian Plain

2018 ◽  
Vol 29 (12) ◽  
pp. 4373-4386 ◽  
Author(s):  
Csaba Bozán ◽  
Katalin Takács ◽  
János Körösparti ◽  
Annamária Laborczi ◽  
Norbert Túri ◽  
...  
Keyword(s):  
Spatial Assessment ◽  
Great Hungarian Plain ◽  
Excess Water ◽  
Water Hazard ◽  
Hungarian Plain

Meteorological study for Gangotri Glacier and its comparison with other high altitude meteorological stations in central Himalayan region

2007 ◽  
Vol 38 (1) ◽  
pp. 59-77 ◽  
Author(s):  
Pratap Singh ◽  
Umesh K. Haritashya ◽  
Naresh Kumar
Keyword(s):  
High Altitude ◽  
Meteorological Data ◽  
Weather Conditions ◽  
Meteorological Station ◽  
Himalayan Region ◽  
Valley Wind ◽  
Maximum Rainfall ◽  
Garhwal Himalayas ◽  
Wind Speeds ◽  
Gangotri Glacier

In spite of the vital role of high altitude climatology in melting of snow and glaciers, retreat or advancement of glaciers, flash floods, erosion and sediment transport, etc., weather conditions are not much studied for the high altitude regions of Himalayas. In this study, a comprehensive meteorological analysis has been made for the Gangotri Meteorological Station (Bhagirathi Valley, Garhwal Himalayas) using data observed for four consecutive melt seasons (2000–2003) covering a period from May to October for each year. The collected meteorological data includes rainfall, temperature, wind speed and direction, relative humidity, sunshine hours and evaporation. The results and their distribution over the different melt seasons were compared with available meteorological records for Dokriani Meteorological Station (Dingad Valley, Garhwal Himalayas) and Pyramid Meteorological Station (Khumbu Valley, Nepal Himalayas). The magnitude and distribution of temperature were found to be similar for different Himalayan regions, while rainfall varied from region to region. The influence of the monsoon was meagre on the rainfall in these areas. July was recorded to be the warmest month for all the regions and, in general, August had the maximum rainfall. For all the stations, daytime up-valley wind speeds were 3 to 4 times stronger than the nighttime down-valley wind speeds. It was found that the Gangotri Glacier area experienced relatively low humidity and high evaporation rates as compared to other parts of the Himalayas. Such analysis reveals the broad meteorological characteristics of the high altitude areas of the Central Himalayan region.

scholarly journals Summer drought in Switzerland 1981‒2020: Events, trends and drivers

2021 ◽  
Author(s):  
Simon C. Scherrer ◽  
Christoph Spirig ◽  
Martin Hirschi ◽  
Felix Maurer ◽  
Sven Kotlarski
Keyword(s):  
Regional Climate Model ◽  
Soil Water ◽  
Climate Model ◽  
Potential Evapotranspiration ◽  
Meteorological Data ◽  
Regional Climate ◽  
Reanalysis Data ◽  
Summer Drought ◽  
Temperature And Precipitation ◽  
Temperature Scaling

<p>The Alpine region has recently experienced several dry summers with negative impacts on the economy, society and ecology. Here, soil water, evapotranspiration and meteorological data from several observational and model-based data sources is used to assess events, trends and drivers of summer drought in Switzerland in the period 1981‒2020. 2003 and 2018 are identified as the driest summers followed by somewhat weaker drought conditions in 2020, 2015 and 2011. We find clear evidence for an increasing summer drying in Switzerland. The observed climatic water balance (-39.2 mm/decade) and 0-1 m soil water from reanalysis (ERA5-Land: -4.7 mm/decade; ERA5: -7.2 mm/decade) show a clear tendency towards summer drying with decreasing trends in most months. Increasing evapotranspiration (potential evapotranspiration: +21.0 mm/decade; ERA5-Land actual evapotranspiration: +15.1 mm/decade) is identified as important driver which scales excellently (+4 to +7%/K) with the observed strong warming of about 2°C. An insignificant decrease in precipitation further enhanced the tendency towards drier conditions. Most simulations of the EURO-CORDEX regional climate model ensemble underestimate the changes in summer drying. They underestimate both, the observed recent summer warming and the small decrease in precipitation. The changes in temperature and precipitation are negatively correlated, i.e. simulations with stronger warming tend to show (weak) decreases in precipitation. However, most simulations and the reanalysis overestimate the correlation between temperature and precipitation and the precipitation-temperature scaling on the interannual time scale. Our results emphasize that the analysis of the regional summer drought evolution and its drivers remains challenging especially with regional climate model data but considerable uncertainties also exist in reanalysis data sets.</p>

scholarly journals Meteorology in field artillery ballistic calculations

2021 ◽  
Vol 2090 (1) ◽  
pp. 012149
Author(s):  
M Mendel
Keyword(s):  
Atmospheric Pressure ◽  
Open Space ◽  
Meteorological Parameters ◽  
Meteorological Data ◽  
Armed Forces ◽  
Weather Conditions ◽  
Atmospheric Conditions ◽  
Area Of Interest ◽  
Single Probe ◽  
Atmospheric Data

Abstract The most important meteorological data are:ambient temperature, precipitation quantity, air humidity, amount and type of clouds, atmospheric pressure, wind direction and speed, visibility, weather phenomena. These coefficients impact the effectiveness of various combat activities, especially those conducted in an open space. Knowledge of future weather conditions is essential for planning the location, calculating times, choice of means, and other aspects relevant to the upcoming operations. Taking weather conditions into account is vital, specifically when it comes to planning combat operations, where the accuracy in cooperation is of paramount importance. Rocket forces and artillery is a particular type of armed forces where weather conditions are critical. The effectiveness of artillery depends on ballistic calculation precision, and so knowledge of atmospheric conditions is fundamental. Atmospheric data are collected from sounding using a single probe attached to a balloon. It is generally known that particular meteorological parameters change in a smooth spatial manner depending on various coefficients. Information about the atmosphere collected by a single probe may be insufficient, due to the possibility of a balloon drifting away from the area of interest, and the calculations are based on data received from its probe. In this paper, I will suggest a method for preparing artillery use meteorologically, which takes into account the distribution of particular meteorological coefficients over a given area.

Sign in / Sign up

Export Citation Format

Share Document