scholarly journals CO-SURFACTANT POLYETHYLENE GLYCOL MONO-OLEATE IN THE ORMULATION OF NATURAL BASED-SURFACTANT FOR CHEMICAL EOR (SURFAKTAN PENDAMPING POLIETILEN GLIKOL MONO-OLEAT PADA FORMULASI SURFAKTAN BERBASIS NABATI UNTUK INJEKSI KIMIA EOR)

2018 ◽  
Vol 40 (1) ◽  
pp. 1-8
Author(s):  
Yani Faozani Alli ◽  
Letty Brioletty ◽  
Hestuti Eni ◽  
Yan Irawan
Keyword(s):  
Polyethylene Glycol ◽  
Oil Recovery ◽  
Raw Materials ◽  
Oil Field ◽  
Laboratory Scale ◽  
Chemical Flooding ◽  
Core Flooding ◽  
Central Java ◽  
Chemical Eor ◽  
Enhance Oil Recovery

Natural-based surfactant such as methyl esther sulfonate, which is derived from palm oil, has increasingly become the focus of study for the last decade to improve oil recovery due to the abundant raw materials availability and the need for oil as a source of energy. Surfactant MES development with the targeted fluid reservoir characteristic has been conducted in the laboratory scale as well as in the field scale. In this study, the addition of polyethylene glycol mono-oleate as co-surfactant to enhanced oil recovery in the L oil field in Central Java was investigated in the laboratory scale through compatibility observation, IFT measurement, thermal stability and core flooding tests. The results showed that the presence of PMO improved the solubility of surfactant mixture in the water which formed one phase milky solution. Decreasing IFT as the crucial factor for surfactant flooding was also achieved until 10-3 dyne/cm and thermally stable for two months. Furthermore, core flooding experiments to study the performance of surfactant to recover oil production showed that the mixture of MES and PMO are able to enhance oil recovery until 55.35% Sor and have potential to be used as chemicals for chemical flooding in the targeted oil field.Surfaktan berbasis nabati seperti surfaktan metil ester sulfonat (MES) dari bahan minyak kelapa sawit telah menjadi fokus penelitian selama satu dekade terakhir untuk meningkatkan perolehan minyak, mengingat ketersediaan bahan baku kelapa sawit yang melimpah di Indonesia serta kebutuhan akan minyak sebagai sumber energi yang terus meningkat. Pengembangan surfaktan MES agar sesuai dengan karakteristik fluida reservoar lapangan target juga telah berhasil dilakukan dalam skala laboratorium dan skala lapangan. Pada penelitian ini, pengaruh penambahan surfaktan pendamping polietilen glikol mono-oleat (PMO) untuk meningkatkan kemampuan surfaktan dalam meningkatkan produksi minyak pada lapangan L di Jawa Tengah dalam skala laboratorium dilakukan melalui uji kompatibilitas, ujitegangan antarmuka (IFT), uji kestabilan termal dan uji core flooding. Hasil penelitian menunjukkan bahwa penambahan PMO sebagai surfaktan pendamping MES dapat meningkatkan kelarutan surfaktan di dalam air formasi terkait dengan keberadaan gugus etoksi yang mempunyai sifat antarmuka di dalam struktur molekul PMO. Penurunan IFT sebagai faktor penentu dalam injeksi surfaktan juga dapat dicapai hingga 10-3 dyne/cm, dan dapat bertahan hingga dua bulan pada suhu reservoar. Adapun pengujian kemampuan surfaktan dalam meningkatkan perolehan minyak melalui uji core flooding menunjukkan bahwa campuran surfaktan MES dan PMO dapat meningkatkan produksi minyak hingga 55.35% Sor dan berpotensi untuk dijadikan bahan injeksi kimia di lapangan target.

Evaluation and Application of Endogenous Microorganism Activator in Reservoir after Chemical Flooding

2014 ◽  
Vol 1051 ◽  
pp. 404-409
Author(s):  
Jian Jun Le ◽  
Ji Yuan Zhang ◽  
Lu Lu Bai ◽  
Rui Wang ◽  
Zhao Wei Hou ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
High Pressure ◽  
Oil Recovery ◽  
Physical Simulation ◽  
Chemical Flooding ◽  
Core Flooding ◽  
Simulation Experiments ◽  
The Core ◽  
Enhance Oil Recovery ◽  
Growth And Reproduction

To further enhance oil recovery in reservoir after chemical flooding, an efficient activator formulation for promoting metabolism of endogenous microorganism was researched. Changes in community structure, growth and metabolites of endogenous microorganism were analyzed by methods of aerogenic experiments, physical simulation experiments, electron microscopy scanning (SEM), T-RFLP and Pyrophosphate sequencing. To evaluate whether endogenous microorganism activator screened in laboratory could activate endogenous microorganisms and enhance oil recovery in reservoirs after polymer flooding. The flooding effect and mechanism were studied, and this activator was used in a testing well group in Daqing oilfield. The results of the aerogenic experiments showed that the activator could activate the endogenous microorganisms in the injected water and make them produce a lot of biogas. The pressurized gas reached 2MPa after 60d static culture of activator in a high pressure vessel. The results showed that the activator could activate the endogenous microorganisms in the injected sewage and make them have a lot of growth and reproduction in the core and physical simulation of natural core flooding experiment. In the field test,the incremental oil production was 5957 t while the water content declined by 2.2% after injecting the activator, which provides an effective way to further enhance oil recovery in reservoir after chemical flooding.

Laboratory studies of oil-washing characteristics of surfactants in the pore space of reservoir rocks

2021 ◽  
pp. 86-98
Author(s):  
V. Yu. Ogoreltsev ◽  
S. A. Leontiev ◽  
A. S. Drozdov
Keyword(s):  
Oil Recovery ◽  
Pore Space ◽  
Oil Field ◽  
Oil Fields ◽  
Molecular Surface ◽  
Laboratory Studies ◽  
Reservoir Rocks ◽  
Technological Efficiency ◽  
Chemical Eor ◽  
Physical And Chemical

When developing hard-to-recover reserves of oil fields, methods of enhanced oil recovery, used from chemical ones, are massively used. To establish the actual oil-washing characteristics of surfactant grades accepted for testing in the pore space of oil-containing reservoir rocks, a set of laboratory studies was carried out, including the study of molecular-surface properties upon contact of oil from the BS10 formation of the West Surgutskoye field and model water types with the addition of surfactants of various concentrations, as well as filtration tests of surfactant technology compositions on core models of the VK1 reservoir of the Rogozhnikovskoye oil field. On the basis of the performed laboratory studies of rocks, it has been established that conducting pilot operations with the use of Neonol RHP-20 will lead to higher technological efficiency than from the currently used at the company's fields in the compositions of the technologies of physical and chemical EOR Neonol BS-1 and proposed for application of Neftenol VKS, Aldinol-50 and Betanol.

scholarly journals Experimental Investigation of Chemical Flooding Using Nanoparticles and Polymer on Displacement of Crude Oil for Enhanced Oil Recovery

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Imran Akbar ◽  
Hongtao Zhou ◽  
Wei Liu ◽  
Muhammad Usman Tahir ◽  
Asadullah Memon ◽  
...  
Keyword(s):  
Fluid Flow ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Petroleum Industry ◽  
Chemical Flooding ◽  
Polymer Gel ◽  
Core Flooding ◽  
High Concentration ◽  
Remaining Oil ◽  
Water Cut

In the petroleum industry, the researchers have developed a new technique called enhanced oil recovery to recover the remaining oil in reservoirs. Some reservoirs are very complex and require advanced enhanced oil recovery (EOR) techniques containing new materials and additives in order to produce maximum oil in economic and environmental friendly manners. In this work, the effects of nanosuspensions (KY-200) and polymer gel HPAM (854) on oil recovery and water cut were studied in the view of EOR techniques and their results were compared. The mechanism of nanosuspensions transportation through the sand pack was also discussed. The adopted methodology involved the preparation of gel, viscosity test, and core flooding experiments. The optimum concentration of nanosuspensions after viscosity tests was used for displacement experiments and 3 wt % concentration of nanosuspensions amplified the oil recovery. In addition, high concentration leads to more agglomeration; thus, high core plugging takes place and diverts the fluid flow towards unswept zones to push more oil to produce and decrease the water cut. Experimental results indicate that nanosuspensions have the ability to plug the thief zones of water channeling and can divert the fluid flow towards unswept zones to recover the remaining oil from the reservoir excessively rather than the normal polymer gel flooding. The injection pressure was observed higher during nanosuspension injection than polymer gel injection. The oil recovery was achieved by about 41.04% from nanosuspensions, that is, 14.09% higher than polymer gel. Further investigations are required in the field of nanoparticles applications in enhanced oil recovery to meet the world's energy demands.

Evaluation of a Composite Flooding Formula Used to Enhance the Oil Recovery of Ansai Oil Field

2020 ◽  
Vol 984 ◽  
pp. 183-188
Author(s):  
Rong Jun Zhang ◽  
Xiao Ke Wang ◽  
Jin Lin Zhao ◽  
Zheng Peng Zhou ◽  
Gang Chen
Keyword(s):  
Interfacial Tension ◽  
Oil Recovery ◽  
Comprehensive Evaluation ◽  
High Surface ◽  
Evaluation Criteria ◽  
Oil Field ◽  
Chemical Flooding ◽  
Surfactant Flooding ◽  
Technical Requirements ◽  
Viscoelastic Surfactant

The composite flooding formula utilizes the characteristics of polymer flooding and surfactant flooding to compensate for the shortage of single component chemical flooding, reduce the oil-water interfacial tension to a certain extent, and broaden the maintenance range of low interfacial tension. The combined effects and synergies in the oil displacement process enhance oil recovery and allow it to adapt to a wider range of reservoir conditions. In this paper, the high surface active polymer-surfactant flooding formula suitable for the Chang 6 reservoir in Ansai Oilfield was evaluated. The general technical index of the viscoelastic surfactant fracturing fluid and the composite flooding surfactant were evaluated. The technical requirements are evaluation criteria, and comprehensive evaluation is made from several aspects such as salt tolerance, interfacial tension and emulsifying properties.

Implementation of Chemical EOR as Huff and Puff to Improve Oil Recovery for Heavy Oil Field by Chemical Treatment SEMAR Cast Study Bamboo Oil Field

2016 ◽  
Author(s):  
Ali Farog ◽  
Haytham A.Mustafa ◽  
Enas Mukhtar ◽  
Husham Elblaoula ◽  
Badreldin A. Yassin ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
Chemical Treatment ◽  
Oil Field ◽  
Chemical Eor

Steamflood With Vertical Injectors and Horizontal Producers in Multiple Zones

2011 ◽  
Vol 14 (02) ◽  
pp. 161-170 ◽  
Author(s):  
Sanjeev Malik ◽  
Y.M.. M. Zhang ◽  
Mohammed Al Asimi ◽  
Thomas L. Gould
Keyword(s):  
Oil Recovery ◽  
Thermal Model ◽  
Steam Injection ◽  
Oil Field ◽  
Sultanate Of Oman ◽  
Vertical Wells ◽  
Final Design ◽  
Reservoir Description ◽  
Thermal Simulations ◽  
Enhance Oil Recovery

Summary The Mukhaizna heavy-oil field in the Sultanate of Oman desert has three distinct zones that require steam injection to enhance oil recovery. A new, geocellular-based reservoir description was prepared to evaluate the steamflood performance of these three zones using different horizontal- and vertical-well configurations. On the basis of the results of thermal simulations, the final design called for vertical wells injecting steam into all three zones, with three stacked horizontal production (HP) wells, one for each zone. One advantage of this design is the ability to control the steam flux from each vertical injector (VI) into each zone to mitigate early steam breakthrough and optimize recovery. After 2 years of steam injection, oil production is tracking the thermal model nicely.

scholarly journals MICROEMULSION FLOODING MECHANISM FOR OPTIMUM OIL RECOVERY ON CHEMICAL INJECTION

2018 ◽  
Vol 40 (2) ◽  
pp. 85-90
Author(s):  
Yani Faozani Alli ◽  
Edward ML Tobing ◽  
Usman Usman
Keyword(s):  
Oil Recovery ◽  
Mobility Control ◽  
Chemical Flooding ◽  
Residual Oil ◽  
Core Flooding ◽  
Oil Viscosity ◽  
Oil Saturation ◽  
Remaining Oil ◽  
Tertiary Oil Recovery

The formation of microemulsion in the injection of surfactant at chemical flooding is crucial for the effectiveness of injection. Microemulsion can be obtained either by mixing the surfactant and oil at the surface or injecting surfactant into the reservoir to form in situ microemulsion. Its translucent homogeneous mixtures of oil and water in the presence of surfactant is believed to displace the remaining oil in the reservoir. Previously, we showed the effect of microemulsion-based surfactant formulation to reduce the interfacial tension (IFT) of oil and water to the ultralow level that suffi cient enough to overcome the capillary pressure in the pore throat and mobilize the residual oil. However, the effectiveness of microemulsion flooding to enhance the oil recovery in the targeted representative core has not been investigated.In this article, the performance of microemulsion-based surfactant formulation to improve the oil recovery in the reservoir condition was investigated in the laboratory scale through the core flooding experiment. Microemulsion-based formulation consist of 2% surfactant A and 0.85% of alkaline sodium carbonate (Na2CO3) were prepared by mixing with synthetic soften brine (SSB) in the presence of various concentration of polymer for improving the mobility control. The viscosity of surfactant-polymer in the presence of alkaline (ASP) and polymer drive that used for chemical injection slug were measured. The tertiary oil recovery experiment was carried out using core flooding apparatus to study the ability of microemulsion-based formulation to recover the oil production. The results showed that polymer at 2200 ppm in the ASP mixtures can generate 12.16 cP solution which is twice higher than the oil viscosity to prevent the fi ngering occurrence. Whereas single polymer drive at 1300 ppm was able to produce 15.15 cP polymer solution due to the absence of alkaline. Core flooding experiment result with design injection of 0.15 PV ASP followed by 1.5 PV polymer showed that the additional oil recovery after waterflood can be obtained as high as 93.41% of remaining oil saturation after waterflood (Sor), or 57.71% of initial oil saturation (Soi). Those results conclude that the microemulsion-based surfactant flooding is the most effective mechanism to achieve the optimum oil recovery in the targeted reservoir.

Nanoparticles EOR Aluminum Oxide (Al2O3) Used As a Spontaneous Imbibition Test for Sandstone Core

2019 ◽  
Author(s):  
Mohammed A. Samba ◽  
Hafsa A. Hassan ◽  
Mahjouba S. Munayr ◽  
Moataz Yusef ◽  
Abdelkareem Eschweido ◽  
...  
Keyword(s):  
Aluminum Oxide ◽  
Oil Recovery ◽  
Room Temperature ◽  
Spontaneous Imbibition ◽  
Chemical Flooding ◽  
Secondary Recovery ◽  
Chemical Eor ◽  
Change Temperature ◽  
Al2o3 Concentration ◽  
Polymer Surfactant

Abstract There are three types of oil production energy operations, primary recovery, secondary recovery and enhanced oil recovery (EOR). EOR consider as the last period for production operations. Where the EOR classify into many types such as thermal injection, gas injection, microbial EOR and chemical flooding. Chemical flooding classified into many types such as polymer, surfactant, alkaline and nanoparticles (NP). NP can be classified into many types such as Iron Oxide (Fe2O3), Aluminum Oxide (Al2O3) and Magnesium Oxide (MgO) etc. In this study NP Aluminum oxide (Al2O3) were used to enhance the oil recovery. The main objective of this study is to use the Nanoparticles EOR (Al2O3) and know it is effect on increasing the extraction of oil from cores. The big motivation of using Al2O3 that it is easy to extract it from raw clay. However, the raw clay is available in Libya and using it will be more economic than using other method of chemical EOR. Nanoparticles EOR Aluminum oxide (Al2O3) used as a spontaneous imbibition test for sandstone core samples after saturated by crude oil. A spontaneous imbibition test consisting of two scenarios of nanoparticle solution (Al2O3) with change temperature and compared with one scenario of distilled water. The spontaneous imbibition test was performed in this study at room temperature to oven temperature (30C°, 40C°, 50C°, 60C°, 70C°). The results shown that the oil recovery increases with the increase of the concentration of nanoparticle (Al2O3) and increase the temperature. The higher oil recovery was 76.04% at NP (Al2O3) concentration 1%. Finally, oil swelling and adsorption (NP (Al2O3) with oil drops) have been noticed during the extraction of oil. Thus, the gravity force will be higher than the capillary force.

Integrated EOR Screening in a Marginal Oil Field Environment

2021 ◽  
Author(s):  
Chukwunonso Uche ◽  
Samuel Esieboma ◽  
Jennifer Uche ◽  
Ibrahim Bukar
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Laboratory Data ◽  
Oil Field ◽  
Chemical Flooding ◽  
Implementation Challenges ◽  
Recovery Potential ◽  
Field Environment ◽  
Screening Study ◽  
The Impact

Abstract An evaluation of potential EOR processes applicable in the marginal oil field operation of the Niger Delta region is presented. Technical feasibility, process availability, oil recovery potential, and other uncertainties and risks associated with exploitation of enhanced oil recovery technique in a marginal oil field environment are being assessed. Few Enhanced oil recovery processes, namely polymer flooding, chemical flooding and microbial EOR (MEOR), are considered for possible application in this marginal oil field. The objective of the screening study is to evaluate and rank the EOR options and also select the most attractive method that will have to be further chased to a pilot test stage. Emphasis is strictly on a technical assessment of the incremental oil potential of each of the EOR methods and also identification of critical operational and logistical components of the entire process for their implementation in the offshore operating environment. Recoverable volumes associated with EOR may be significant, but key project development and implementation challenges and extra cost elements must be considered in any EOR forecast for an effective EOR process ranking. Some of these concerns (e.g. Polymer/chemical supply, facilities requirements, and the impact of EOR on reservoir performance and wellbore integrity) may be significant enough to eliminate a method from being considered further and at that point the best EOR option that requires minimal cost exposure for achieving the best recoverable shall be considered. Moreso, there is consideration of the quantity and quality of laboratory data that should support the viability of each EOR process being considered. This paper narrates the state of technical readiness for field implementation of each EOR method and identifies remaining work required to progress EOR process in this marginal oil field.

Sign in / Sign up

Export Citation Format

Share Document